A simple solid phase spectrofluorimetric method combined with flow analysis for the rapid determination of salicylamide and salicylic acid in pharmaceutical samples

A new, sensitive and very simple spectrofluorimetric biparameter sensor is described for the determination of salicylamide and/or salicylic acid in pharmaceutical preparations. The method integrates the transitory retention and fluorescence detection of both compounds on Sephadex QAE A-25 resin packed into a conventional flow-through cell. A monochannel manifold with two alternative carriers is used. At pH 2.0 (first carrier) salicylic acid is selectively retained on the solid support and after developing the analytical signal it is desorbed. At pH 11.0 (second carrier) both salicylic acid and salicylamide are simultaneously and transitorily retained on the solid, the analytical signal now corresponding to both analytes. The monochromators were tuned at 260 (excitation) and 415 (emission) nm, respectively. The calibration graph for salicylamide is linear over the range 0.01 to 0.32 μg mL^–1 and for salicylic acid from 0.04 to 1.0 μg mL^–1 in the presence of each other. The relative standard deviation and the sampling frequency for the determination of salicylamide (0.20 μg mL^–1) and salicylic acid (0.50 μg mL^–1) were 1.1% and 35 h^–1, and 0.9% and 45 h^–1, respectively. Good results on application to individual determination or mixture resolution in pharmaceutical samples testify to the usefulness of the proposed sensor. Received: 20 April 1999 / Revised: 7 June 1999 / Accepted: 12 June 1999     

Indirect atomic absorption spectrometric determination of citric acid by continuous precipitation

A continuous precipitation and filtration flow system for the separation of citric acid by precipitation with lead and indirect flame atomic absorption spectrometry is proposed. The precipitate is formed by injecting the lead solution into a carrier containing the sample and is subsequently retained on a filter. By using this reversed precipitation flow-injection configuration, citric acid was determined in the range 2–40 μg mL^–1, with a relative standard deviation of 2.9% at a sampling frequency of 60 samples h^–1. This method has been applied to the determination of citric acid in fruit juices, carbonated soft drinks and sweets. Received: 19 March 1999 / Revised: 27 May 1999 / Accepted: 31 May 1999     

Determination of ascorbic acid by use of a flow-through solid phase UV spectrophotometric system

A continuous flow-through solid phase spectrophotometric system was developed for the determination of ascorbic acid based on the measurement of its intrinsic absorbance in the UV region when retained on a 1 mm Sephadex QAE A-25 anion exchanger gel layer which is placed into an appropriate quartz flow-through cell, the absorbance exhibited by this solid phase being monitored at 267 nm. A monochannel manifold was used, the sample (300, 600 or 1000 μL) being injected into the carrier solution (acetate buffer). This solution also elutes the analyte after developing the analytical signal, and regenerates the resin layer which, therefore, remains ready for the next sample. The linear dynamic range and other analytical parameters vary according to the sample volume injected. Three calibration lines were established for 300, 600 and 1000 μL sample volume, which ranged from 1.0 to 20.0, 0.5 to 10.0 and 0.2 to 6.0 μg mL^–1, respectively. The detection limits were 0.04 (300 μL), 0.03 (600 μL) and 0.02 μg mL^–1 (1000 μL), the sampling rates 28, 24 and 21 h^–1, and the RSDs (n = 10) 0.87%, 1.08% and 0.90%, respectively. The amount of ascorbic acid in various samples (pharmaceuticals, sweets and urine) were successfully determined with this method. Received: 28 April 1998 / Revised: 3 June 1998 / Accepted: 30 June 1998     

Determination of ascorbic acid by use of a flow-through solid phase UV spectrophotometric system

A continuous flow-through solid phase spectrophotometric system was developed for the determination of ascorbic acid based on the measurement of its intrinsic absorbance in the UV region when retained on a 1 mm Sephadex QAE A-25 anion exchanger gel layer which is placed into an appropriate quartz flow-through cell, the absorbance exhibited by this solid phase being monitored at 267 nm. A monochannel manifold was used, the sample (300, 600 or 1000 μL) being injected into the carrier solution (acetate buffer). This solution also elutes the analyte after developing the analytical signal, and regenerates the resin layer which, therefore, remains ready for the next sample. The linear dynamic range and other analytical parameters vary according to the sample volume injected. Three calibration lines were established for 300, 600 and 1000 μL sample volume, which ranged from 1.0 to 20.0, 0.5 to 10.0 and 0.2 to 6.0 μg mL^–1, respectively. The detection limits were 0.04 (300 μL), 0.03 (600 μL) and 0.02 μg mL^–1 (1000 μL), the sampling rates 28, 24 and 21 h^–1, and the RSDs (n = 10) 0.87%, 1.08% and 0.90%, respectively. The amount of ascorbic acid in various samples (pharmaceuticals, sweets and urine) were successfully determined with this method. Received: 28 April 1998 / Revised: 3 June 1998 / Accepted: 30 June 1998     

Resolution of an intense sweetener mixture by use of a flow injection sensor with on-line solid-phase extraction

An integrated solid-phase spectrophotometry–FIA method is proposed for simultaneous determination of the mixture of saccharin (1,2-benzisothiazol-3(2H)-one-1,1-dioxide; E-954) (SA) and aspartame (N-l-α-aspartyl-l-phenylalanine-1-methyl ester; E-951) (AS). The procedure is based on on-line preconcentration of AS on a C₁₈ silica gel minicolumn and separation from SA, followed by measurement, at λ=210 nm, of the absorbance of SA which is transiently retained on the adsorbent Sephadex G-25 placed in the flow-through cell of a monochannel FIA setup using pH 3.0 orthophosphoric acid–dihydrogen phosphate buffer, 3.75×10^–3 mol L⁻¹, as carrier. Subsequent desorption of AS with methanol enables its determination at λ=205 nm. With a sampling frequency of 10 h⁻¹, the applicable concentration range, the detection limit, and the relative standard deviation were from 1.0 to 200.0 μg mL⁻¹, 0.30 μg mL⁻¹, and 1.0% (80 μg mL⁻¹, n=10), respectively, for SA and from 10.0 to 200.0 μg mL⁻¹, 1.4 μg mL⁻¹, and 1.6% (100 μg mL⁻¹, n=10) for AS. The method was used to determine the amounts of aspartame and saccharin in sweets and drinks. Recovery was always between 99 and 101%. The method enabled satisfactory determination of blends of SA and AS in low-calorie and dietary products and the results were compared with those from an HPLC reference method.     

Flow injection spectrofluorimetric determination of iron(III) in water using salicylic acid

A simple and fast flow injection fluorescence quenching method for the determination of iron in water has been developed. Fluorimetric determination is based on the measurement of the quenching effect of iron on salicylic acid fluorescence. An emission peak of salicylic acid in aqueous solution occurs at 409 nm with excitation at 299 nm. The carrier solution used was 2 × 10⁻⁶ mol L⁻¹ salicylic acid in 0.1 mol L⁻¹ NH₄⁺/NH₃ buffer solution at pH 8.5. Linear calibration was obtained for 5–100 μg L⁻¹ iron(III) and the relative standard deviation was 1.25 % (n = 5) for a 20 μL injection volume iron(III). The limit of detection was 0.3 μg L⁻¹ and the sampling rate was 60 h⁻¹. The effect of interferences from various metals and anions commonly present in water was also studied. The method was successfully applied to the determination of low levels of iron in real samples (river, sea, and spring waters).     

Flow injection atomic absorption spectrometric determination of iodide using an on-line preconcentration technique

A continuous flow atomic absorption spectrometric system was used to develop an efficient on-line preconcentration-elution procedure for the determination of iodide traces. Chromium (VI) is introduced into the flow system and is reduced to chromium (III) in acid medium proportionally to the iodide present in the sample. The Cr(III) reduced by iodide is retained on a minicolumn packed with a poly(aminophosphonic acid) chelating resin, while unreduced Cr(VI) is not retained. Reduced Cr(III) is preconcentrated by passing the sample containing iodide through the system during 3 min, and is then eluted with 0.5 mol L^–1 hydrochloric acid and determined by flame atomic absorption spectrometry (FAAS). The detection limit (3σ) obtained is 2.5 μg L^–1. Other ions typically present in waters do not interfere. The proposed method allows the determination of iodide in the range 6–220 μg L^–1 with a relative standard deviation of 2.7% at a rate of 17 samples h^–1. The method has been applied to the determination of iodide in tap and sea waters. Received: 16 September 1999 / Revised: 15 November 1999 / Accepted: 19 November 1999     

Determination of thorium and uranium in activated concrete by inductively coupled plasma mass spectrometry after anion-exchange separation

A sensitive analytical method was established for the determination of Th and U in activated concrete samples. The method combines an anion-exchange separation step with an ICP-MS determination technique. In the ICP-MS measurement, a few μg mL^–1 of Al and Ca, a few ng mL^–1 of Mn, La, Ce, Nd and Pb and pg mL^–1 amounts of Li, Zr, Nb and Ba coexisting in the anion-exchange fraction of Th and U did not interfere. No adverse interference effects were observed in real sample analyses. The obtained detection limits (3σ, n = 10) of Th and U were 2.3 and 1.8 pg mL^–1, respectively. The analytical precisions for ca. 5 μg g^–1 Th and ca. 1 μg g^–1 U in real activated concrete samples were equally less than 7% RSD. The accuracies obtained by the analysis of GSJ rock standard samples were –18.1 to 0.4% for the Th determination and –14.0 to –5.7% for the U determination. The method uses the conventional absolute calibration curve. The internal standard calibration is unnecessary. Received: 14 March 1999 / Revised: 13 July 1999 / Accepted: 15 July 1999     

Flow injection-solid phase spectrofluorimetric determination of pyridoxine in presence of group B-vitamins

A flow-through optosensor has been prepared for the sensitive and selective determination of pyridoxine (vitamin B₆) in aqueous solutions. The sensor was developed in conjunction with a monochannel flow-injection analysis system with fluorimetric detection using Sephadex SP-C25 resin as an active sorbent substrate. This method of determination is carried out without any derivatization. The wavelengths of excitation and emission were 295 and 385 nm, respectively. When a HCl (10^–3 mol L^–1) / NaCl (3 × 10^–2 mol L^–1) solution is used as carrier solution, the sensor responds linearly in the measuring range of 5–200, 10–400 and 50–1800 ng mL^–1 with detection limits of 0.33, 0.67, and 5.70 ng mL^–1 for 2000, 1000 and 200 μL of sample volume, respectively. The relative standard deviation for ten independent determinations is less than 0.75% for 0.2 and 1.0 mL of sample volumes used, and 1.31% for 2.0 mL of sample volume used. The method was satisfactorily applied to the determination of vitamin B₆ in pharmaceutical preparations. Received: 4 June 1998 / Revised: 16 July 1998 / Accepted: 6 August 1998     

Spectrofluorimetric determination of uric acid based on its activation of catalytic oxidation of pyronine Y

A novel kinetic spectrofluorimetric method for the determination of uric acid based on the activation effect of uric acid on the Cu(II) ion catalyzed oxidation of pyronine Y by hydrogen peroxide was developed. The influence of different buffer solutions was tested and the Britton-Robinson buffer solution with pH 2.2 was found to be the optimum. The detection limit and the linear range for uric acid are 0.09 μg mL⁻¹ and 0.3–3.0 μg mL⁻¹, respectively. The RSD for eleven determinations of 1.6 μg mL⁻¹ uric acid was 1.6 %. Satisfactory results were obtained when using this method of uric acid determination in human urine.     

A spectrophotometric method for quantitative determination of lactulose in pharmaceutical preparations

A simple spectrophotometric assay for the quantification of lactulose in pharmaceutical preparations was developed. The method is based on hydrolysis of lactulose under acidic conditions. The hydrolyzed product reacts with resorcinol, giving absorption peaks at 398 and 480 nm. Both absorption wavelengths can be used for the determination of lactulose. The limit of detection of lactulose at 398 nm and 480 nm was 0.075 μg mL⁻¹ and 0.65 μg mL⁻¹, respectively. The calibration was linear in the range of 5–25 μg mL⁻¹. Analytical conditions were optimized, and the method was validated for analysis of pharmaceutical preparations. The determined amount of lactulose was found to be in good agreement with labeled claims in commercial products. The proposed method is economical, convenient, and suitable for the quantification of lactulose in pharmaceutical preparations. The text was submitted by the authors in English.     

Simple and rapid determination of piperacillin and ceftazidime in human plasma samples by HPLC

Summary A simple and rapid liquid chromatographic method has been developed for the determination of therapeutic levels of piperacillin (I) and ceftazidime (II) in human plasma. Plasma and p-propionamidophenol (internal standard) were precipitated with methanol (I) or 20% trichloroacetic acid (II). The supernatant was analysed on a 5 μm Spherisorb ODS C₁₈ column with acetonitrile-0.05 M phosphate buffer pH 3.8 as mobile phase and ultraviolet detection at 254 nm. The calibration graph was linear from 10 to 250 μg mL⁻¹, for (I), and from 5 to 200 μg mL⁻¹ for (II). Intra and inter-day CV did no exceed 2.29% for (I), and were 10.76–11.13%–2.00–5.62 for (II) at concentrations of 10 μg mL⁻¹ and 250 μg mL⁻¹.     

Isocratic Reversed-Phase HPLC for Simultaneous Separation and Determination of Seven Antiepileptic Drugs and Two of their Active Metabolites in Human Plasma

A simple reversed-phase high-performance liquid chromatographic (HPLC) method has been developed for the simultaneous determination of the antiepileptic drugs (AEDs) zonisamide (ZNS), primidone (PRI), lamotrigine (LTG), phenobarbital (PB), phenytoin (PHT), oxcarbazepine (OXC), and carbamazepine (CBZ) and two of their active metabolites, monohydroxycarbamazepine (MHD) and carbamazepine 10,11-epoxide (CBZE) in human plasma. Plasma (100 μL) was pretreated by deproteinization with 300 μL methanol containing 20 μg mL⁻¹ propranolol hydrochloride as internal standard. HPLC was performed on a C₈ column (4.6 mm × 250 mm; particle size 5 μm) with methanol–acetonitrile–0.1% trifluoroacetic acid, 235:120:645 (v/v), as mobile phase at a flow rate of 1.5 mL min⁻¹. ZNS, OXC, and CBZ were monitored by UV detection at 235 nm, and PRI, LTG, MHD, PB, PHT, and CBZE by UV detection at 215 nm. Relationships between response and concentration were linear over the concentration ranges 1–80 μg mL⁻¹ for ZNS, 5–50 μg mL⁻¹ for PRI, 1–25 μg mL⁻¹ for LTG, 1–50 μg mL⁻¹ for MHD, 5–100 μg mL⁻¹ for PB, 1–10 μg mL⁻¹ for CBZE, 0.5–25 μg mL⁻¹ for OXC, 1–50 μg mL⁻¹ for PHT, and 1–25 μg mL⁻¹ for CBZ. Intra-day and inter-day reproducibility were adequate (coefficients of variation were ≤11.6%) and absolute recovery ranged from 95.2 ± 6.13 to 107.7 ± 7.76% for all the analytes; for the IS recovery was 98.69 ± 1.12%. The method was proved to be accurate, reproducible, convenient, and suitable for therapeutic monitoring of the nine analytes.     

Simultaneous First Derivative Spectrophotometric Determination of Palladium and Nickel Using 2-(2-Thiazolylazo)-5-Dimethylaminobenzoic Acid as an Analytical Reagent

 A simple, rapid, selective, sensitive and economical method has been developed for the simultaneous determination of trace amounts of palladium and nickel in aqueous methanolic medium using 2-(2-thiazolylazo)-5-dimethylam inobenzoic acid as an analytical reagent by first derivative spectrophotometr y. Palladium is determined by measuring base to peak distance at λ=695.0 nm while nickel is estimated by zero crossing method in the mixture. The linearity is maintained between 0.12–1.75 μg mL⁻¹ for palladium and 0.07–1.60 μg mL⁻¹ for nickel in the pH range 2.8–7.2 and 3.4–8.8 respectively. Seven replicate determinations of 1.0 μ g mL⁻¹ of palladium and 0.8 μg mL⁻¹ of nickel in a mixture give a mean signal height of 0.391 for Pd and 0.541 for Ni with relative standard deviations of 0.9% and 1.2%, respectively. The sensitivity of the proposed method is 0.391 (dA/dλ)/(μg mL⁻¹) for palladium and 0.685 (dA/dλ)/(μg mL⁻¹) for nickel. Various parameters have been optimised for the simultaneous determination of palladium and nickel in various complex samples. Received March 30, 1999. Revision November 25, 1999.     

Simultaneous Determination of Baicalin, Baicalein, Wogonin, Oxysophocarpine, Oxymatrine and Matrine in the Chinese Herbal Preparation of Sanwu-Huangqin-Tang by Ion-Paired HPLC

A sensitive and reliable ion-paired high-performance liquid chromatographic method has been established for the simultaneous quantification of six major active ingredients, namely baicalin, baicalein, wogonin, oxysophocarpine, oxymatrine and matrine in the Chinese herbal preparation, Sanwu-Huangqin-Tang. HPLC analyses were performed on a Phenomenex luna C₁₈ column with mobile phase of methanol–acetonitrile–aqueous phosphoric acid at a flow rate of 0.9 mL min⁻¹. The complete separation was achieved within 35 min for the six target constituents. A good linear regression relationship between peak-areas and concentrations was obtained over the range of 12.10–242.0 μg*mL⁻¹ for baicalin, 5.05–101.0 μg*mL⁻¹ for baicalein, 0.95–19.0 μg*mL⁻¹ for wogonin, 2.75–55.0 μg*mL⁻¹ for oxysophocarpin, 2.75–55.0 μg*mL⁻¹ for oxymatrine and 4.90–98.0 μg*mL⁻¹ for matrine, respectively. The repeatability was evaluated by intra- and inter-day assays with relative standard deviation (RSD) being less than 5.1%. The recoveries, measured at three concentration levels, varied from 93.8 to 102.1%. The assay was successfully applied for determination of six bioactive compounds in Sanwu-Huangqin-Tang. The interaction of chemical constituents was observed when the herbs were used in compatibility. The results indicated that the developed assay method was rapid, accurate and could be readily utilized as a quality control method for Sanwu-Huangqin-Tang.     

Simultaneous determination of azelaic and benzoic acids in topical preparations by liquid chromatography

Summary An isocratic, reversed-phase liquid chromatographic (LC) method has been developed for the simultaneous determination of azelaic and benzoic acids in pharmaceutical creams. The compounds were separated on a C₁₈ column (4 μm particles); the mobile phase was methanolwater, 40∶60, containing 10mm ammonium acetate and with the pH adjusted to 5.0. Detection was performed at 220 nm. The method was validated for accuracy, linearity, precision, and selectivity. Recoveries at levels corresponding to 80% to 120% of the declared content of the creams ranged from 99.5 to 101.8% and from 100.4 to 102.1% for azelaic and benzoic acids, respectively. The calibration graphs were linear in the ranges 20–1400 μg mL⁻¹ for azelaic acid (correlation coefficient,r ₁>0.99999), and 0.1–7.0 μg mL⁻¹ for benzoic acid (r>0.99998).     

Resonance Rayleigh scattering spectra of tetracycline antibiotic–Cu(II)–titan yellow systems and their applications in analytical chemistry

Tetracycline antibiotics (TCs) such as doxycycline (DOTC), chlortetracycline (CTC), oxytetracycline (OTC), and tetracycline (TC) react with Cu(II) in pH 3.5 BR buffer medium to form 1:1 cationic chelates, which further react with titan yellow to form 2:1 ion association complexes. These result in great enhancement of resonance Rayleigh scattering (RRS) and the appearance of new RRS spectra. The ion association complexes of DOTC, CTC, OTC, and TC have similar spectral characteristics and their maximum RRS wavelengths are all located at 464 nm. The quantitative determination ranges and the detection limits (3σ) of the four TCs are 0.037–4.8 μg mL⁻¹ and 11.2 ng mL⁻¹ for DOTC, 0.041–5.2 μg mL⁻¹ and 12.4 ng mL⁻¹ for CTC, 0.050–4.8 μg mL⁻¹ and 15.1 ng mL⁻¹ for TC, and 0.088–5.0 μg mL⁻¹ and 26.3 ng mL⁻¹ for OTC, respectively. The optimum reaction conditions, the effects of foreign substances, the structure of ternary complexes, and the reaction mechanism are discussed. A sensitive, rapid, and simple RRS method for the determination of DOTC has been developed.     

Simultaneous spectrophotometric determination of minoxidil and tretinoin by the H-point standard addition method and partial least squares

A simple, sensitive and selective spectrophotometric method for simultaneous determination of tretinoin and minoxidil using partial least square (PLS) calibration and H-point standard addition method (HPSAM) is described. The results of the H-point standard addition method show that minoxidil and tretinoin can be determined simultaneously with the concentration ratio of tretinoin to minoxidil varying from 2: 1 to 1: 33 in mixed samples. A partial least squares multivariate calibration method for the analysis of binary mixtures of tretinoin and minoxidil was also developed. The total relative standard error for applying the PLS method to eleven synthetic samples in the concentration range of 0–10 μg mL⁻¹ tretinoin and 0–32 μg mL⁻¹ minoxidil was 2.59 %. Both proposed methods (PLS and HPSAM) were also successfully applied in the determination of tretinoin and minoxidil in several synthetic pharmaceutical solutions.     

Simultaneous RP-LC Determination of Losartan Potassium, Ramipril, and Hydrochlorothiazide in Pharmaceutical Preparations

A simple, rapid, and precise reversed-phase high-performance liquid chromatographic method has been developed for simultaneous determination of losartan potassium, ramipril, and hydrochlorothiazide. The three drugs were separated on a 150 mm × 4.6 mm i.d., 5 μm particle, Cosmosil C₁₈ column. The mobile phase was 0.025 m sodium perchlorate–acetonitrile, 62:38 (v/v), containing 0.1% heptanesulphonic acid, pH adjusted to 2.85 with orthophosphoric acid, at a flow rate of 1.0 mL min⁻¹. UV detection was performed at 215 nm. The method was validated for linearity, accuracy, precision, and limit of quantitation. Linearity, accuracy, and precision were acceptable in the ranges 35–65 μg mL⁻¹ for losartan, 1.75–3.25 μg mL⁻¹ for ramipril, and 8.75–16.25 μg mL⁻¹ for hydrochlorothiazide.     

Application of a hexapole collision and reaction cell in ICP-MS Part II: Analytical figures of merit and first applications

The application of an ion-guiding gas-filled hexapole collision/reaction cell in ICP-MS has been studied to characterize the analytical figures of merit that can be achieved with this approach. For the elements investigated, application of a buffer and a reaction gas resulted in improved sensitivities which are lowest for Be with about 7 · 10⁷ cps per μg mL^–1 and highest for Ba with about ?6 · 10⁸ cps per μg mL^–1. Relative standard deviations (RSD) < 0.1% were obtained. Application of the reaction gas H₂ was used to suppress polyatomic ions caused by argon. The reduction amounted up to four orders of magnitude so that elements such as Ca, K, Cr, Fe, As and Se could be analyzed in nitric and hydrochloric acid or in methanol. Detection limits of 6 pg mL^–1 for Cr in 2% methanol, 23 pg mL^–1 for As and 9 pg mL^–1 for Se in 0.28 M HCl were achieved. For other elements detection limits ?< 1 pg mL^–1 were realized in the medium and high mass range. Accuracy was proved using the NIST 1643d standard reference material. Received: 10 May 1999 / Revised: 4 June 1999 / Accepted: 12 June 1999