Stable single-mode vertical-cavity surface-emitting laser with a photoresistive aperture

It is numerically demonstrated that on-axis current channeling through the use of a photoactive layer or layers in vertical-cavity surface-emitting laser cavities counteracts hole burning and allows single-mode operation at high currents. The photoactive layers act as a variable-resistivity screen whose radial aperture is controlled by the light itself. Absorption of a small fraction of the light intensity suffices for significant on-axis current peaking with minimum efficiency loss and optical mode distortion.     

Enhancing light absorption for organic solar cells using front ITO nanograting and back ultrathin Al layer

To address the discrepancy between carrier collection and light absorption of organic solar cells caused by the limited carrier mobility and optical absorption coefficient for the normally employed organic photoactive layers, a light management structure composed of a front indium tin oxide(ITO) nanograting and ultrathin Al layer inserted in between the photoactive layer and the electron transport layer(ETL) is introduced. Owing to the antireflection and light scattering induced by the ITO nanograting and the suppression of light absorption in the ETL by the inserted Al layer, the light absorption of the photoactive layer is significantly enhanced in a spectral range from 400 nm to 650 nm that also covers the main energy region of solar irradiation for the normally employed active materials such as the P3HT:PC_(61) BM blend. The simulation results indicate that comparing with the control device with a planar configuration of ITO/PEDOT:PSS/P3HT:PC_(61) BM(80-nm thick)/Zn O/Al, the short-circuit current density and power conversion efficiency of the optimized light management structure can be improved by 32.86% and 34.46%. Moreover, good omnidirectional light management is observed for the proposed device structure. Owing to the fact that the light management structure possesses the simple structure and excellent performance, the exploration of such a structure can be believed to be significant in fabricating the thin film-based optoelectronic devices.     

Formation of expanded smooth quasi-Bessel beam range due to the transformation of the Gaussian beam in absorbing axicon

The quasi-Bessel beam range produced by an absorbing axicon is investigated. It is shown that when an incident Gaussian beam is used, the absorbing axicon stretches (with respect to transparent axicon case) the uniform on-axis light intensity distribution length, as well as expanding the quasi-Bessel beam range. In addition, the peak of axial light distribution is shifted from the axicon tip. As a result any spatial modulation formed due to the bluntness of the tip is reduced close to the on-axis intensity peak, which becomes more smooth and uniform.     

部分相干光经柱面球差透镜聚焦所产生的焦移

利用Collins公式得出光强均匀部分相干光经柱面球差透镜聚焦后的轴上光强分布,并通过数值模拟的方法研究了入射光的菲涅耳数、相干度和透镜的球差对轴上点光强分布的影响.结果显示,当菲涅耳数较小、空间相干度较小的部分相干光经无球差透镜聚焦时,轴上点光强分布会产生焦移现象,而当部分相干光被球差透镜聚焦时,也会有焦移现象产生.     

金纳米四面体增强有机太阳电池光吸收及光伏性能研究

为增强有机太阳能电池的光利用率,提高能量转换效率,本文合成了金四面体形状的纳米粒子,并用聚苯乙烯磺酸钠(PSS)包裹形成了核壳结构的金纳米四面体(Au@PSS tetrahedra NPs).将其掺杂到有机太阳能电池空穴提取层与活性层的界面处,利用表面等离子体共振效应来增强活性层对光的吸收,从而提高有机太阳能电池的能量转换效率.研究了掺杂浓度和PSS包裹厚度对电池性能的影响.结果表明:掺杂浓度为6%时,器件性能最佳,能量转换效率达到3.08%; PSS壳层厚度优化为2.5 nm时,转换效率达到3.65%,较标准电池提升了22.9%.电池性能的改善主要源于金四面体纳米粒子的共振吸收峰位于给体材料吸收谱范围内,纳米粒子的共振促进了给体的吸收,同时PSS壳层的引入促进了激子的解离和电荷的转移,上述因素的改善提升了电池的短路电流、填充因子和转换效率.     

非相干光源无衍射光的自重建

基于Hankel 波理论分析了非相干光源产生Bessel光束的自重建特性, 利用光学设计软件ZEMAX模拟了Bessel光束经过轴上圆形障碍物后的截面光强分布. 由于发光二级管(LED) 具有一定的频谱宽度且不像激光具有很高的相干度, 因此我们采用一定频宽范围的连续谱来描述. 从模拟结果可以直观地看出Bessel光束被轴上圆形障碍物遮挡后逐步完成自重建, 说明用LED非相干光作为光源具有自重建特性.实验上采用LED和轴棱锥元件产生Bessel光束, 然后通过轴上圆形障碍物、轴上方形障碍物, 并拍摄了不同位置处的截面光强分布图, 证实了非相干光源产生Bessel光束的自重建特性.实验结果和模拟结果相符合. 关键词： 无衍射光束 LED光源 轴棱锥 自重建     

Modeling of Multiple Scattering from an Ensemble of Spheres in a Laser Beam

This paper details the results of upgrading an effective numerical technique (derived for multiple-scattering simulations in photon correlation/cross-correlation with a plane-wave light source) for the modeling of multiple scattering in a laser beam. The off-axis shape coefficients of an arbitrary beam are computed starting from the set of known beam-shape coefficients for an on-axis location by using the addition theorem for the spherical vector wavefunctions of the first kind. The discussed technique is verified by comparison with a localized approximation for a focused Gaussian beam and with Barton's spheres-arbitrary beam interaction theory. An additional advantage of the proposed technique (self-testing of the computation accuracy by comparison of the off-axis beam-shape coefficients evaluated from two different on-axis origins) is demonstrated.     

Physical foundations of achromatic nulling interferometry for stellar coronagraphy

We propose an achromatic interferometer for the observation of a faint off-axis light source against the background of a bright on-axis light source. The on-axis source and its copy acquire an achromatic phase shift by 180° and interfere with a phase difference of π. The achromatic phase shift is attributable to the geometric phase in the three-dimensional interferometer scheme. Interference spatially separates the nulled and bright fields of the on-axis source, redirecting them on opposite sides of the beamsplitter. Interference does not attenuate the field of the off-axis source and redirects it with an equal intensity on both sides of the beamsplitter. We consider the principle of operation of the nulling interferometer and constraints on the attenuation of an extended source due to the decrease in coherence. The laboratory breadboard and experiment are briefly described.     

平面波经小圆环衍射轴上光强特性分析

从标量衍射理论出发,采用瑞利-索末菲衍射边界条件,通过求解第一类瑞利-索末菲衍射积分得到平面波经圆环衍射后轴上的波函数,进而分析轴上的光强特性以及光强极值数量、位置和大小与衍射圆环内外孔径的关系.比较用传统的光强定义和精确定义得到的光强公式的偏差,以及偏差与内外半径的关系.并将圆环衍射向内半径为零和外半径为无穷大两个方向进行推广,即对圆孔和圆形障碍物两种情况下的衍射情况进行讨论.     

The system design and assemble for the high resolution telescope system with segmented aperture

A design method along with its results, for a space optical system with high resolution and wide field of view, is described. Such optical systems can be used in the infrared as well as visible configurations. The proposed design is based on an on-axis Ritchey-Chrétien system with corrected lens element while the primary mirror is a segmented aperture. Here the on-axis concept allows wide-field enabling a variety of observations designed for the multi-object spectrometer instruments, optimized for low scattering and low emission of light. The use of segmented mirrors in the optical system allows adopting any method for its fabrication purposes. Segment results are discussed and the image quality of the design based on these results is evaluated in this paper.     

多色高斯-谢尔模型光束通过球差透镜的光谱变化

基于部分相干光的传输方程研究了多色高斯一谢尔模型光束通过球差透镜的光谱变化。结果表明,多色高斯一谢尔模型光束通过球羞透镜后的轴上光谱与空间相关参量β,球差系数C1,源光谱谱宽σ0,位置z有关。着重分析了球差对轴上光谱的影响,将所得的结果与无像差的理想情况作了比较。当无球差时,轴上光谱仅有蓝移,而有球差时,轴上光谱存在蓝移或红移,并会出现光谱分裂现象。在某些特定位置处,轴上光谱分裂为等高双峰,并有跃变出现。而且,球差对光谱的影响随空间相关性增加而变得明显。当空间相关参量减小到某一值时,光谱分裂消失。     

Improved high-contrast imaging with on-axis telescopes using a multistage vortex coronagraph

The vortex coronagraph is one of the most promising coronagraphs for high-contrast imaging because of its simplicity, small inner working angle, high throughput, and clear off-axis discovery space. However, as with most coronagraphs, centrally obscured on-axis telescopes degrade contrast. Based on the remarkable ability of vortex coronagraphs to move light between the interior and exterior of pupils, we propose a method based on multiple vortices, that without sacrificing throughput, reduces the residual light leakage to (a/A)(n), with n ≥ 4, and a and A being the radii of the central obscuration and primary mirror, respectively. This method thus enables high contrasts to be reached even with an on-axis telescope.     

Highly efficient second-harmonic nanosource for near-field optics and microscopy

A nanometric source of second-harmonic (SH) light with unprecedented efficiency is demonstrated; it exploits the grazing-incidence illumination of a metal tip, which is conventionally used for atomic force microscopy, by 25-fs laser pulses of a high-energy Ti:sapphire oscillator. Tip scanning around the beam focus shows that the SH generation is strongly localized at its apex. The polarization dependence of the SH light complies with the model of an on-axis nonlinear oscillating dipole.     

Homogenization of on-axis intensity distribution produced by a Fresnel refractive axicon

The on-axis intensity distribution of a beam generated by a Fresnel axicon (fraxicon) is experimentally and numerically examined and compared to a classical axicon. Monochromatic illumination produces strong oscillations in this distribution due to diffraction from the fraxicon facets combined with shadowing effects. It is shown that by proper selection of the ratio of the illuminating light wavelength to the period of the fraxicon these oscillations can be minimized by exploiting interference. In addition, polychromatic illumination of the fraxicon also permits homogenization of the on-axis intensity with some remaining oscillations at the start of the depth of field which can be reduced by decreasing the period of the fraxicon.     

Achromatic nulling interferometer for stellar coronography

A common-path interferometer that is intended for observation of a faint off-axis light source against the background of an intense on-axis source is suggested. The on-axis source and its replicated image acquire an achromatic phase shift of 180° and interfere in antiphase. The achromatic phase shift is due to the geometrical phase in the configuration of a 3D interferometer. Interference spatially separates the dark and bright fields of the on-axis source by directing them to different sides of a beam splitter. At the same time, interference does not attenuate the field of the off-axis source, directing it to different sides of the beam splitter with equal intensities. Such a configuration of the common-path interferometer provides mechanical stability.     

Common-path achromatic interferometer-coronagraph: nulling of polychromatic light

A three-dimensional common-path interferometer is proposed, which can achromatically null out an on-axis source while it maintains the detectability of an off-axis source. A geometric phase in the three-dimensional interferometer introduces an achromatic pi-phase shift to the light from the on-axis source, such that destructive interference nulls out the axial light at one of the ports of the interferometer. Light from the off-axis source, which is exempt from the pi-phase shift, comes out from both ports with equal intensity. The common-path scheme makes the system highly immune to environmental disturbances.     

Wavelength-dependent intensity distribution of a Gaussian beam scattered by a spherical particle

The wavelength-dependent intensity of a light beam scattered by an isotropic homogeneous particle illuminated with an on-axis monochromatic polarized Gaussian beam is calculated in this paper. The vector spherical harmonics expansion and T transformation matrix are used to form the theoretical basis. Numerical results show that the angular intensity distribution is symmetric for an on-axis polarized Gaussian beam illumination upon an aqueous spherical particle at 473, 532 and 660 nm. For the specified aqueous spherical particle, the scattered intensity distribution decreases with increase in wavelengths.     

Free-space laser beams with pulsing on-axis intensities

Summary We present a family of laser beams with spatially pulsing on-axis intensity. They are obtained by summation of nondiffracting Bessel beams. They are shown to be able to realize, with good approximation, any spatial periodic on-axis intensity in the period limits set by the frequency of the monochromatic source of light used. To speed up publication, the authors of this paper have agreed to not receive the proofs for correction.     

Light-stimulated electro-optics by azo-doped aerosil/7CB nanocomposites

Photoactive nanofilled nematic is proposed. Stable three-component photoresponsive nanocomposite was prepared from photo-insensitive nanofilled nematic by inclusion of 3?wt.% azobenzene-containing photoactive mesogen 4-(4′-ethoxyphenylazo)phenyl hexanoate (EPH). The host nanofilled nematic was produced from the room-temperature nematic liquid crystal 4-n-heptyl cyanobiphenyl (7CB) and 3?wt.% filler of Aerosil 300 hydrophilic silica nanospheres of size 7?nm. Apparent effect of stimulation with a relatively weak continuous illumination by UV light (375?nm wavelength) takes place for both the alternating-current electric field-dependent optical transmittance and the electro-optic amplitude-frequency modulation by thin films (25?µm thick) of the EPH/aerosil/7CB nanocomposite. The light-stimulated electro-optics of EPH-doped aerosil/7CB films and the corresponding reversible light control are achieved through trans-cis-trans photoisomerization of the photoactive agent EPH. As such, the initial electro-optical response of the studied photoactive nanocomposites is recovered with continuous blue-light illumination. The examined EPH/aerosil/7CB nanocomposites exhibit photo-controllable electro-optical response that is of practical interest.     

Experimental characterization of nonlinear harmonic generation in planar and helical undulators

We present an experimental characterization of the process of coherent harmonic generation in single-pass free electron lasers. The harmonic radiation is obtained by seeding the electron beam stored in the Elettra storage ring with a Ti:sapphire laser. Different methods for generating harmonics are compared between them, and a detailed characterization of the emitted light is performed for different polarizations. Our results also contribute to the debate about the possible presence of a coherent on-axis signal in helical undulators. In this respect, we provide an experimental confirmation of recent theoretical studies that predict no coherent on-axis signal.