Conjugate addition reactions of alpha-aminoalkylcuprates with alpha, beta-alkenyl-, alpha,beta-alkynyl-, alpha,beta-beta,gamma-allenyl-, and alpha,beta-gamma,delta-dienyl carboxylic acid derivatives, nitriles, and sulfoxides

alpha-Aminoalkylcuprates prepared from alpha-lithio carbamates and CuCN.2LiCl participate in 1,4-addition reactions with alpha, beta-unsaturated esters, thiol esters, imides, and nitriles in poor to excellent yields depending upon the electron-withdrawing substituent and the substitution pattern of the unsaturated substrate. These reagents also undergo conjugate addition reactions with alpha,beta-alkynyl esters, sulfoxides, and nitriles and with alpha,beta-beta,gamma-unsaturated allenyl esters. Excellent stereocontrol is achieved in the conjugate additions of alpha-aminoalkylcuprates to the allenyl esters, while poor stereoselectivity results in the conjugate additions to the alkynyl derivatives. Deprotection and cyclization of the alkynyl adducts affords pyrrolin-2-ones, while similar treatment of the allenyl adducts affords 4-alkylidine- pyrrolidin-2-ones and pyrrolizidinones.     

Syntheses, structure, some band gaps, and electronic structures of CsLnZnTe3 (Ln=La, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm, Y)

Eleven new quaternary rare-earth tellurides, CsLnZnTe3 (Ln=La, Pr, Nd, Sm, Gd, Tb, Dy, Ho, Er, Tm, and Y), were prepared from solid-state reactions at 1123 K. These isostructural materials crystallize in the layered KZrCuS3 structure type in the orthorhombic space group Cmcm. The structure is composed of LnTe6 octahedra and ZnTe4 tetrahedra that share edges to form [LnZnTe3] layers. These layers stack perpendicular to [010] and are separated by layers of face- and edge-sharing CsTe8 bicapped trigonal prisms. There are no Te-Te bonds in the structure of these CsLnZnTe3 compounds so the formal oxidation states of Cs/Ln/Zn/Te are 1+/3+/2+/2-. Optical band gaps of 2.13 eV for CsGdZnTe3 and 2.12 eV for CsTbZnTe3 were deduced from single-crystal optical absorption measurements. A first-principles calculation of the density of states and the frequency-dependent optical properties was performed on CsGdZnTe3. The calculated band gap of 2.1 eV is in good agreement with the experimental value. A quadratic fit for the lanthanide contraction of the Ln-Te distance is superior to a linear one if the closed-shell atom is included.     

Bestimmung von Calcium, Magnesium, Strontium, Kalium, Natrium, Lithium, Eisen, Mangan, Chrom, Nickel, Kupfer, Cobalt, Zink und Cadmium

Zusammenfassung Für 14 Elemente wird eine universelle Methode beschrieben. Durch Zusatz von Lanthan und Cäsium werden die physikalischen, chemischen und Ionisations-Störungen in der Flammen-AAS ausgeschaltet. Es wird gezeigt, daß diese Methode für sehr unterschiedliche Stoffe mit Erfolg angewendet werden kann, und gleichzeitig die Genauigkeit des Routinemeßverfahrens nicht beeinträchtigt wird. Nur in Ausnahmefällen muß die Additionsmethode benutzt werden.

---

Determination of calcium, magnesium, strontium, potassium, sodium, lithium, iron, manganese, chromium, nickel, copper, cobalt, zinc and cadmium by flame AASA universal method for the analysis of waters, coals, ashes, ores, rocks, building materials, metals and similar samples

Summary A universal method is described for 14 elements. By addition of lanthanum and caesium the physical, chemical and ionization interferences in the flame AAS are eliminated. It is demonstrated that this method can be applied successfully for very different materials and simultaneously the precision of the standard measuring method is not affected. Only in exceptional cases the addition method has to be applied.

---

---

Herrn Prof. Dr. W. Schuhknecht, dem langjährigen Leiter des Zentrallabors der Saarbergwerke AG (1948–1972) zum Gedenken

---

Für die sorgfältige Durchführung von Säure- und Schmelzaufschlüssen sowie seine nützlichen Hinweise bei der Korrektur des Manuskriptes möchte ich Herrn Lothar Kiefer meinen besonderen Dank aussprechen.     

RM1: a reparameterization of AM1 for H, C, N, O, P, S, F, Cl, Br, and I

Twenty years ago, the landmark AM1 was introduced, and has since had an increasingly wide following among chemists due to its consistently good results and time-tested reliability--being presently available in countless computational quantum chemistry programs. However, semiempirical molecular orbital models still are of limited accuracy and need to be improved if the full potential of new linear scaling techniques, such as MOZYME and LocalSCF, is to be realized. Accordingly, in this article we present RM1 (Recife Model 1): a reparameterization of AM1. As before, the properties used in the parameterization procedure were: heats of formation, dipole moments, ionization potentials and geometric variables (bond lengths and angles). Considering that the vast majority of molecules of importance to life can be assembled by using only six elements: C, H, N, O, P, and S, and that by adding the halogens we can now build most molecules of importance to pharmaceutical research, our training set consisted of 1736 molecules, representative of organic and biochemistry, containing C, H, N, O, P, S, F, Cl, Br, and I atoms. Unlike AM1, and similar to PM3, all RM1 parameters have been optimized. For enthalpies of formation, dipole moments, ionization potentials, and interatomic distances, the average errors in RM1, for the 1736 molecules, are less than those for AM1, PM3, and PM5. Indeed, the average errors in kcal x mol(-1) of the enthalpies of formation for AM1, PM3, and PM5 are 11.15, 7.98, and 6.03, whereas for RM1 this value is 5.77. The errors, in Debye, of the dipole moments for AM1, PM3, PM5, and RM1 are, respectively, 0.37, 0.38, 0.50, and 0.34. Likewise, the respective errors for the ionization potentials, in eV, are 0.60, 0.55, 0.48, and 0.45, and the respective errors, in angstroms, for the interatomic distances are 0.036, 0.029, 0.037, and 0.027. The RM1 average error in bond angles of 6.82 degrees is only slightly higher than the AM1 figure of 5.88 degrees, and both are much smaller than the PM3 and PM5 figures of 6.98 degrees and 9.83 degrees, respectively. Moreover, a known error in PM3 nitrogen charges is corrected in RM1. Therefore, RM1 represents an improvement over AM1 and its similar successor PM3, and is probably very competitive with PM5, which is a somewhat different model, and not fully disclosed. RM1 possesses the same analytical construct and the same number of parameters for each atom as AM1, and, therefore, can be easily implemented in any software that already has AM1, not requiring any change in any line of code, with the sole exception of the values of the parameters themselves.     

电感耦合等离子体质谱法(ICP-MS)测定稀土矿中钇、镧、铈、镨、钕、钐、铕、钆、铽、镝、钬、铒、铥、镱、镥和钪量

通过用四酸与微波消解法溶解样品对比,建立了用硝酸、盐酸、氢氟酸、高氯酸分解样品,采用电感耦合等离子体质谱法(ICP-MS)测定稀土矿中16种元素含量。方法采用_¹⁰³Rh作为内标消除干扰,确定了最优测定条件,16种稀土元素检出限为0.0029-0.0099ng/mL,测定范围为0.0005-0.020%。精密度试验、加标回收试验及标准物质检测,结果验证了方法的可行性及准确性。该方法简单易操作,结果可靠,能满足实验分析要求。     

Optimization of parameters for semiempirical methods. III Extension of PM3 to Be,Mg, Zn,Ga, Ge,As, Se,Cd, In,Sn, Sb,Te, Hg,Tl, Pb,and Bi

Using a recently developed procedure for optimizing parameters for semiempirical methods,¹ PM3 has been extended to a total of 28 elements. Average ΔH_f errors for the newly parameterized elements are Be: 8.6, Mg: 8.4, Zn: 5.8, Ga: 14.9, Ge: 11.4, As: 8.5, Se: 11.1, Cd: 2.6, In: 11.3, Sn: 9.0, Sb: 13.7, Te: 11.3, Hg: 6.8, Tl: 6.5, Pb: 7.4, and Bi: 10.9 kcal/mol. For some elements the paucity of data has resulted in a method, which, while highly accurate, is likely to be only poorly predictive.     

Organogermyl,Organostannyl, and Organoplumbyl Phosphines,Arsines, Stibines,and Bismuthines

The preparation, properties, and reactions of the compounds named in the title are described, with particular reference to the possible participation of (p→d)_π components in the bonding between the group IVB and the group VB elements.     

Reduction specifics of rare-earth orthovanadates (REE = La,Nd, Sm,Dy, Ho,Er, Tm,Yb, and Lu)

The reduction specifics of REE orthovanadates LnVO₄ (Ln = La, Nd, Sm, Dy, Ho, Er, Tm, Yb, and Lu) have been studied using the temperature-programmed reduction (TPR) method. Hydrogen and carbon monoxide were chosen as reducing agents. The reduction temperature is found to depend both on the REE and the reducing agent. REE orthovanadates are reduced in the range 1033–1153 K not forming phases that contain vanadium in intermediate oxidation states. In CO, the reduction temperature is found to be higher than in H₂ for all orthovanadates. TPR data have been used to calculate the activation energies of reduction of REE orthovanadates using the Kissinger equation. The effective activation energies of reduction depend on the REE and the reducing agent and are in the range 41–147 kJ/mol.     

Simultanbestimmung von Si, Mn, P, Cu, Al, Ni, Cr, Mo, V, Ti, Co und As in St?hlen mit ICP-AES

Summary A universal method for quantitative analysis of twelve elements in low-alloy steels is described. The samples are digested in a mixture of sulfuric-/nitric acid/ammonium peroxodisulfate. Si, Mn, P, Cu, Al, Ni, Cr, Mo, V, Ti, Co, As are determined in solution by ICP-AES. The procedure was tested with NBS and BCS reference samples. The analytical results are in good agreement with the certified values. With slight modifications, the method is applicable to the analysis of high-alloy steel samples.     

Acidity trends in alpha,beta-unsaturated sulfur, selenium, and tellurium derivatives: comparison with C-, Si-, Ge-, Sn-, N-, P-, As-, and Sb-containing analogues

The gas-phase acidity of CH3-CH2XH (X=S, Se, Te), CH2=CHXH (X=S, Se, Te) and PhXH (X=S, Se) compounds was measured by means of Fourier transform ion cyclotron resonance mass spectrometry. To analyze the role that unsaturation plays on the intrinsic acidity of these systems, a parallel theoretical study, in the framework of the G2 and the G2(MP2) theories, was carried out for all ethyl, ethenyl (vinyl), ethynyl, and phenyl O-, S-, Se-, and Te-containing derivatives. Unsaturated compounds are stronger acids than their saturated analogues, because of the strong pi-electron donor ability of the heteroatoms that contributes to a large stabilization of the unsaturated anions. Ethynyl derivatives are stronger acids than vinyl compounds, while phenyl derivatives have an intrinsic acidity intermediate between that of the corresponding vinyl and ethynyl analogues. The CH2=CHXH vinyl compounds (enol-like) behave systematically as slightly stronger acids than their CH3-C(H)X (keto-like) tautomers. Vinyl derivatives are stronger acids than ethyl compounds, because the anion stabilization attributable to unsaturation is greater than that undergone in the neutral compounds. Conversely, the enhanced acidity of the ethynyl derivatives with respect to the vinyl compounds is due to two concomitant effects, the stabilization of the anion and the destabilization of the neutral compound. The acidities of ethyl, vinyl, and ethynyl derivatives containing heteroatoms of Groups 14, 15, and 16 of the periodic table are closely related, and reflect the differences in electronegativity of the CH3CH2-, CH2=CH-, and CH[triple chemical bond]C- groups.     

Bestimmung von As, Cd, Co, Cr, Cu, Fe, Hg, Mn, Ni, Pb, V und Zn in Kohlen, Additiven, Flugaschen und Impaktorfilterst?uben aus Kohlekraftwerken

Summary The analysis of coal, additives and combustion residues of coal-fired power plants is described. The selection of the best decomposition method has a special meaning for the type of sample (coal, additive etc.) as also for the elements to be determined in the different samples. There is no universal method which fits all the different samples and no universal determination system for this problem. Problems of the determination of chromium and arsenic are described and discussed due to the matrix and the decomposition technique. The determination with another independent method and the measurement of certified reference material is a good approach to the true value of the elements to be determined in the samples.     

Calorimetry of nanoparticles,surfaces, interfaces,thin films,and multilayers

Calorimetry gives insight into the stability of nanophase materials. Using TiO₂ as an example, the interplay of energetics of polymorphism, surface energy, and surface hydration is discussed. Oxide melt solution calorimetry, water adsorption calorimetry, and adiabatic heat capacity studies together show the following. The metastability of bulk polymorphs increases in the order rutile, brookite, anatase, while the surface energy increases in the opposite order. This leads to crossovers in phase stability at the nanoscale, which appears to be a general phenomenon. Hydration plays a major role in stabilizing nanoparticles and the first layers of water are tightly bound. There is little excess heat capacity and no significant excess vibrational entropy in nanophase rutile or anatase. Further applications of calorimetry to thin films, interfaces, multilayers, and sub-milligram samples are presented.     

Amaryllidaceae,sceletium, imidazole,oxazole, thiazole,peptide and miscellaneous alkaloids

This review covers alkaloids classified in the plant families Amaryallidaceae and Sceletium. In addition alkaloids possessing imidazole, oxazole and thiazole structures are listed followed by alkaloids possessing peptide linkages. Finally miscellaneous alkaloids include those compounds found naturally which cannot be classified into known groups; a relative Pandora's box. A total of 620 structures has been reviewed from 218 references found in the literature for the period July 1999 to June 2000.     

Solubilities of magnesium-l-ascorbate,calcium-l-ascorbate,magnesium-l-glutamate,magnesium-d-gluconate,calcium-d-gluconate,calcium-d-heptagluconate,l-aspartic acid,and 3-nitrobenzoic acid in water

The solubility in water of magnesium-l-ascorbate, calcium-l-ascorbate, magnesium-l-glutamate, magnesium-d-gluconate, calcium-d-gluconate, calcium-d-heptagluconate, l-aspartic acid, and 3-nitrobenzoic acid was determined in the 278.15 K to 343.15 K temperature range. The solubility of these compounds served to permit the evaluation of the apparent molar enthalpies of solution.     

猪胰脏中铁钙镁铜铅锌镉锰钴镍的测定

采用硝酸－过氧化氢在自动回流消化仪中消化猪胰脏,火焰原子吸收光度法测定铁、钙、镁、铜、锌、铅、镉、锰、钴、镍的含量。,方法简便,快速,结果令人满意,并对猪胰脏食用价值进行了评价。     

Determination of Ca, K, Mg, Na, sulfate, phosphate, formate, acetate, propionate, and glycerol in biodiesel by capillary electrophoresis with capacitively coupled contactless conductivity detection

In this work, a new method employing capillary electrophoresis (CE) for the determination of several species in biodiesel is introduced. The concentrations of inorganic species (Na⁺, K⁺, Ca²⁺, Mg²⁺, SO₄²⁻, and PO₄³⁻) and glycerol are of interest to the regulatory authorities due to their ability to form undesirable compounds in engines. Additionally, other species of low molecular weight (e.g., acetate, formate, and propionate) are of interest because they contribute towards increasing the acidity. These species are formed by the degradation of biodiesel and cause damage to engines and the environment. The cation separation was performed in background electrolyte (BGE) composed of 30 mmol L⁻¹ of 2-(n-morpholino)ethanesulfonic acid (MES)/L-histidine (His), pH 6. The separation of anionic species was carried out in similar BGE with 0.2 mmol L⁻¹ cetyltrimethylammonium bromide (CTAB) added. For glycerol, a neutral species, its oxidation with periodate was employed. This well-known reaction is specific to polyols and generates iodate. The amount of iodate produced by the reaction was determined by CE. The separation was carried out in approximately 1 min using BGE composed of 30 mmol L⁻¹ acetic acid, pH 3. The analytical parameters evaluated were: linearity (r > 0.99), the RSD values for area and migration time were < 3.4% and 0.9%, respectively, and recovery was in the range of 89 to 107%.     

等离子体原子荧光光谱法测定碳酸锂中钠、钾、钙、镁、铜、铁、钴、镍、锰、锌、镉

建立了用ICP-AFS同时测定碳酸锂中11种微量金属杂质元素的方法。加入甲烷可改善检出限,方法简便,样品分析结果与AAS法结果一致。     

Determination of Y,Sm, Eu,Gd, Dy,Ho, Er in high purity terbium oxide by ICP-AES

Inductively coupled plasma atomic emission spectrometry (ICP-AES) was employed to determine Y, Sm, Eu, Gd, Dy, Ho and Er in high purity terbium oxide. Terbium oxide was dissolved in 0.5 mol/l HNO₃ and nebulized into the plasma generated by a 56 MHz RF generator at 1.5 kW output power. Using a Jobin-Yvon 1-m Czenry-Turner high resolution, high dispersion scanning monochromator, lines mutually interference-free as well as free of interference from the matrix Tb were chosen for the seven analytes. A set of standards containing the analytes in the concentration range 0.01–1.0 gmg/ml with 1 mg/ml Tb was used for calibration. It was necessary to apply background correction to the gross analyte line intensities in order to obtain linear calibration plots for the analytes.     

Eine mikromethode der flammen-atomabsorptions- und emissionsspektrometrie (platinschlaufen-methode)—II: Die bestimmung von As,Bi, Cd,Hg, Pb,Sb, Se,Te, Tl,Zn/Li,Na, K,Cs, Sr,Ba

This paper described the continuation of the work of Part I dealing with a microanalytical method in which the sample is introduced into a flame using an electrically heated platinum loop. This device is used in connection with an atomic absorption (AA) spectrometer. The detection limits are one to two orders of magnitude better than those of conventional flame AAS. The reproducibility depends on the element and is in general 3–5% (relative standard deviation) for concentrations in the $\text{ng}\text{ml}$ range. The platinum loop method can be also applied for flame emission analysis of small amounts of sample or the determination of low concentrations (alkalis). This application gives access to determinations in the lower ng or the pg range (detection limit of lithium: 0.6 pg).     

Carboxyketenes, methyleneketenes, vinylketenes, oxetanediones, ynols, and ylidic ketenes from Meldrum's acid derivatives

It has been documented that 5-methylene-Meldrum's acid derivatives (1, 12 ) and their enols (2, 13) can undergo fragmentation to malonic anhydrides (4, 19 ), carboxyketenes (3, 16) and methyleneketene (5, 21 , 35 ), as well as cyclization to pyrrole-3-one and thiophene-3-one derivatives 11a,b (but not furan-3-ones 11c ) under the conditions of flash vacuum thermolysis (FVT). Here we report theoretical calculations at the B3LYP/6-311 + G(2d, p) and G3X(MP2) levels of theory, which allow a rationalization of these observations. The calculated activation barriers for these reactions are all of the order of 37-40 kcal mol(-1). Hydroxyacetylenes (alkynols) 7 are sometimes observed in FVT reactions of Meldrum's acid derivatives. Their formation is now explained as an FVT reaction of the carboxyketenes (e.g. 3-->7 and 32-->34) with a calculated activation barrier of ca. 39 kcal mol(-1). The cyclization of alkylamino- and alkylthio-substituted methyleneketenes 8a,b to pyrrolone and thiophenone derivatives 11a,b is found to be energetically very feasible under FVT conditions, and even in some cases in solution, with activation barriers of 33-39 kcal mol(-1). This cyclization takes place via the fleeting ylidic ketene intermediates 9a,b,25, and 37a,b, which exist in very shallow energy minima. Alkoxy-substituted methyleneketenes 8c do not cyclize in this manner due to the rather high, but in principle not impossible, activation barriers for the initial 1,4-H shifts to the ylidic ketenes 9c (ca. 47 kcal mol(-1)).