2H－1，2，4－噻二唑并[2,3-α]嘧啶衍生物的合成及除草活性研究（Ⅴ）

合成了10个未见文献报道的目标化合物，结构经IR，^1H NMR,MS和元素分析确 证。初步除草活性测定结果表明：目标化合物具有高效、选择除草活性，主要抑制 双子叶植物（如油菜）的生长,而对单子叶植物（如玉米）具有较好的促进生长作 用。     

2H-1，2，4-噻二唑并[2，3-a]嘧啶衍生物的合成及除草活性研究（Ⅲ）

合成了10个新的2-乙氧甲酰亚胺基-2H-1，2，4-噻二唑并[2，3，-a]嘧啶类化 合物，结构经IR，^1H NMR,MS和元素分析确证，除草活性测定结果表明，部分目标 化合物具有良好的除草性且选择性较好，对双子叶植物安全。     

活性聚合法合成结构精确的含氟嵌段共聚物

结构精确的含氟嵌段共聚物具有优异而独特的化学和物理性能,有广阔的应用前景,因此受到广泛的关注.含氟嵌段共聚物可分为两类,一类是侧基含氟嵌段共聚物,另一类是主链含氟嵌段共聚物.活性聚合为嵌段共聚物的合成提供了最为重要的方法,利用它可以合成结构精确、分子量可控、分子量分布窄的嵌段共聚物.根据单体的反应特性选择不同的聚合方法,可以得到不同的含氟嵌段共聚物.本文主要综述了近几年利用各种活性聚合方法合成结构精确的含氟嵌段共聚物方面的进展.     

活性阳离子聚合法合成嵌段共聚物的研究进展

在８０年代,阳离子聚合研究的一个最重要突破可能就是活性阳离子聚合。目前为止,有关活性阳离子聚合的新引发体系,新单体及合成应用等方面已取得巨大进展,本综述主要介绍利用活性阳离子聚合合成二、三元嵌段和多元嵌段共聚物的研究成果。     

2-（1H-咪唑-1-基）-1-（2，3，4-三甲氧基）苯乙酮肟酯新化合物合成与生物活性研究

首次合成了12个2-（1H-咪唑-1-基）-1-（2，3，4-三甲氧基）苯乙酮肟酯新 化合物，并经元素分析、红外光谱、核磁共振氢谱对其结构进行了表征，初步生物 活性测试表明，有些化合物具有杀菌活性。研究了这些新化合物结构与光谱特征之 间的关系。     

可控／活性正离子聚合的研究与发展

综述了近二十年来乙烯基单体正离子聚合领域的研究和进展,详细介绍了活性/控制正离子聚合体系的机理研究和新引发体系和水相正离子聚合体系的研究新进展,以及采用活性/控制正离子聚合方法设计合成基于聚异丁烯链段的弹性体材料及其在生物材料领域的应用。     

4-甲氧基-2,3,5-三甲基吡啶的合成新方法

以2，3，5-三甲基吡啶为原料，经氧化，硝化，甲氧基化，脱离四步反应合成 4-甲氧基-2，3，5-三甲基吡啶，总收率76%，其结构经IR，~1H NMR，~(13)C NMR 确证。     

活性正离子聚合方法合成两亲性共聚物研究进展

综述由活性正离子聚合方法设计合成两亲性共聚物与两亲性聚合物网络的研究进展 ,并进一步介绍这些两亲性聚合物在生物材料领域的应用。     

5－氟尿嘧啶－卟啉化合物的合成及抗癌活性

以37％－45％的产率合成了六个新的5－氟尿嘧啶-卟啉化合物，通过元素分析 、红外光谱、紫外可见光谱、核磁共振谱和质谱确定了其结构。抗癌试验表明，化 合物A3，A4，A5对Hela（宫颈癌细胞）有明显的抑制作用。     

3－芳基－6－三氯甲基－1，2，4－三唑并[3,4-b]-1,3,4-噻二唑的合成与波谱表征

首次报道3－芳基－4－氨基－5－巯基－1，2，4－三唑与三氯乙酸在三氯氧磷 存在下关环，合成了3－芳基－6－三氯甲基－1，2，4－三唑并[3,4-b]－1，3，4 －噻二唑，标题化合物结构经元素分析、红外光谱、核磁共振氢谱、碳谱与质谱确 证。     

Synthesis and application of modified poly (styrene‐alt‐maleic anhydride) networks as a nano chelating resin for uptake of heavy metal ions

A chelating resin based on modified poly (styrene‐alt‐maleic anhydride) with 3‐aminobenzoic acid was synthesized. This modified resin was further reacted by 1,2‐diaminoethane or 1,3‐diaminopropane in the presence of ultrasonic irradiation to prepare tridimensional chelating resin for the removal of heavy metal ions from aqueous solutions. The adsorption behavior of Fe(II), Cu(II), Zn(II) and Pb(II) ions was investigated by synthesized chelating resins in various pH. Among the synthesized resins, CSMA‐AB1 and CSMA‐AB2 demonstrated a high affinity for the selected metal ions compared to SMA‐AB, and the order of removal percentage changes as follow: Fe(II) > Cu(II) > Zn(II) > Pb(II). The adsorption of all metal ions in acidic medium was moderate, and it was favored at the pH value of 6 and 7. Also, the prepared resins were examined for removal of metal ions from industrial wastewater and were shown to have a very efficient adsorption in the case of Cu(II), Fe(II) and Pb(II); however, the adsorption of Zn(II) was lower than others. The resin was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, X‐ray diffraction analysis and thermogravimetric analysis/derivative thermogravimetry. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis of water‐soluble conductive copolymer based on polyaniline

Synthesis and characterization of polyaniline‐grafted poly(styrene‐alt‐maleic anhydride) (PANI‐g‐PSMA) was carried out to obtain conductive comb copolymers with highly improved processability. First, polyaniline (PANI) was prepared in nano‐scale by chemical synthesis under ultrasonic irradiation. Then the poly(styrene‐alt‐maleic anhydride) (PSMA) was synthesized by free radical polymerization. Moreover, the PANI was grafted on the PSMA backbone to prepare a comb‐like conductive copolymer for improving its processability as a new method. The products were characterized by Fourier transform infrared, ultraviolet–visible spectroscopy and X‐ray diffraction patterns. Morphology of the samples was also investigated by scanning electron microscopy images. Finally, the solubility and conductivity of the products were studied, and it resulted in high solubility of the products in water and other common organic solvents in comparison to the pure PANI. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and characterization of poly(styrene‐maleic anhydride)‐montmorillonite nanocomposite

Poly(styrene‐maleic anhydride)‐montmorillonite nanocomposites were prepared by intercalation of layered montmorillonite with the polymer ions. Synthetic approaches including polymerization and phosphonium salt formation have been used for polymer intercalation and dispersion of the host layers in the polymer matrix. The ratio of the mineral in the composites ranged 30–50%. Wide‐angle X‐ray diffraction (WAXD) disclosed that the d₍₀₀₁₎ spacing between the internal lamellar surface were only expanding to about 13 and 15 Å according to the type of phosphonium salt suggesting packing of polymer molecules between the layers. Examination of these materials by scanning and transmission electron microscopy showed spherical nano size particles of average diameter, 350 nm. Copyright © 2002 John Wiley & Sons, Ltd.     

Ferrocene as an effective initiator for copolymerization of styrene with maleic anhydride

Ferrocene (Fc) was found to be an effective initiator for copolymerization of styrene (ST) with maleic anhydride (MAH). Copolymerization could be initiated by charge transfer complex formed between MAH as an electron acceptor and Fc as an electron donor. A good relationship between the formation of charge transfer complex and initiation activity was observed in the copolymerization of ST with MAH in various solvents. Overall energy of activation determined from an Arrhenius plot in dioxane was found to be 21.8 kJ/mol. © 1995 John Wiley & Sons, Inc.     

Structural and mechanical behavior of polypropylene/ maleated styrene‐(ethylene‐co‐butylene)‐styrene/sisal fiber composites prepared by injection molding

Hybrid composites consisting of isotactic poly(propylene) (PP), sisal fiber (SF), and maleic anhydride grafted styrene‐(ethylene‐co‐butylene)‐styrene copolymer (MA‐SEBS) were prepared by melt compounding, followed by injection molding. The melt‐compounding torque behavior, thermal properties, morphology, crystal structure, and mechanical behavior of the PP/MA‐SEBS/SF composites were systematically investigated. The torque test, thermogravimetric analysis, differential scanning calorimetric, and scanning electron microscopic results all indicated that MA‐SEBS was an effective compatibilizer for the PP/SF composites, and there was a synergism between MA‐SEBS and PP/SF in the thermal stability of the PP/MA‐SEBS/SF composites. Wide‐angle X‐ray diffraction analysis indicated that the α form and β form of the PP crystals coexisted in the PP/MA‐SEBS/SF composites. With the incorporation of MA‐SEBS, the relative amount of β‐form PP crystals decreased significantly. Mechanical tests showed that the tensile strength and impact toughness of the PP/SF composites were generally improved by the incorporation of MA‐SEBS. The instrumented drop‐weight dart‐impact test was also used to examine the impact‐fracture behavior of these composites. The results revealed that the maximum impact force (F_max), impact‐fracture energy (E_T), total impact duration (t_r), crack‐initiation time (t_init), and crack‐propagation time (t_prop) of the composites all tended to increase with an increasing MA‐SEBS content. From these results, the incorporation of MA‐SEBS into PP/SF composites can retard both the crack initiation and propagation phases of the impact‐fracture process. These prolonged the crack initiation and propagation time and increased the energy consumption during impact fracture, thereby leading to toughening of PP/MA‐SEBS/SF composites. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1214–1222, 2002     

Melt modification of poly(styrene‐co‐maleic anhydride) with alcohols in the presence of 1,3‐oxazolines

Various copolyesteramides were prepared by melt compounding at 220 °C involving reaction of poly(styrene‐co‐maleic anhydride), SMA, with 6, 17, and 28 wt % maleic anhydride content, and 1‐dodecanol, C12OH, in the presence of 2‐undecyl‐1,3‐oxazoline, C11OXA. Copolymer architectures were examined by means of ¹H NMR, FTIR, DSC, and TGA using model compounds prepared via solution reactions. While conversion of anhydride with alcohol was poor due to the thermodynamically favored anhydride ring formation, very high conversions were achieved when stoichiometric amounts of C11OXA were added. According to spectroscopic studies esteramide groups resulted from reaction of oxazoline with carboxylic acid intermediate. In the absence of alcohol, C11OXA reacted with anhydride to produce esterimides. Effective attachment of flexible n‐alkyl side chains via simultaneous reaction of C12OH and C11OXA resulted in lower glass‐transition temperatures of copolyesteramides. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1222–1231, 2000     

Synthesis and Characterization of UV-Curable Poly(dimethylsiloxane) Dimethacrylate

This paper presents a new route to the synthesis of UV-curable poly(dimethylsiloxane) dimethacrylate (PDMSDMA). PDMSDMA was essentially prepared by modification of poly(dimethylsiloxane), bis(3-aminopropyl) terminated (PDMS-NH₂) with methacrylic anhydride (MAA). The synthesized products were cured under UV in the presence of camphorquinone (CQ) used as a photoinitiator. The chemical structure of PDMSDMA samples was analyzed by FT-IR and ¹H-NMR spectroscopy. The ¹H-NMR spectrum of PDMSDMA revealed new peaks at 3.20 ppm, corresponding to methylene protons in  CH₂ NH , and 5.25 and 5.65 ppm, corresponding to vinylic protons in  NH CO CCH₃CH₂. The chemical structure of the cured products and the degree of curing were determined by solid state ¹³C CP/MAS NMR and FT-IR (Micro-ATR) spectroscopy. Various parameters, such as concentration of methacrylic anhydride, amount of camphorquinone, and curing time, were studied.     

Molecular characterization of maleic anhydride-functionalized polypropylene

This work deals with the molecular characterization of maleic anhydride melt-functionalized polypropylene (PP-g-MA). The functionalization mechanism, the nature, the concentration, and the location of grafted anhydride species onto the polypropylene chain are discussed. The polypropylene functionalization was performed using a pre-heated Brabender Plastograph (190°C, 4 min of mixing time). Several concentrations of maleic anhydride and organic peroxide were used for this study. In those experimental conditions, the organic peroxide undergoes an homolytic rupture and carries out a polypropylene tertiary hydrogen abstraction. The resulting macroradical undergoes a β-scission leading to a radical chain end which reacts with maleic anhydride. When a termination reaction occurs at this first step a succinic type anhydride chain end is obtained. However, oligomerization of maleic anhydride is found to occur more frequently leading to poly (maleic anhydride) chain end. Concentration of both anhydride types and minimal length of the grafted poly (maleic anhydride) were determined. A fraction of maleic anhydride does not react with polypropylene or homopolymerize leading to nongrafted poly (maleic anhydride). © 1995 John Wiley & Sons, Inc.