等浓度的氯化铵和硫酸铵溶液哪个pH高

有中学化学参考资料题:0.10 mol/L的NH4Cl和(NH4)2SO4溶液哪个pH值高?这似乎是个中学生可做的简单题目,仔细考虑不是如此.如果简单地认为盐酸和硫酸都是强酸,而硫酸是二元酸,硫酸铵溶液中铵盐浓度为0.20 mol/L,那么NH4Cl溶液pH高,那是不妥的.硫酸是二元酸,第一个氢离子能完全电离,第二个氢离子部分电离,如此考虑情况怎么样呢?是不是答案发生变化?这要通过计算来说明.     

Vanadium-based polyanionic compounds as cathode materials for sodium-ion batteries:Toward high-energy and high-power applications

Sodium ion batteries(SIBs)have been regarded as one of the alternatives to lithium ion batteries owing to their wide availability and significantly low cost of sodium sources.However,they face serious challenges of low energy&power density and short cycling lifespan owing to the heavy mass and large radius of Na⁺.Vanadium-based polyanionic compounds have advantageous characteristic of high operating voltage,high ionic conductivity and robust structural framework,which is conducive to their high energy&power density and long lifespan for SIBs.In this review,we will overview the latest V-based polyanionic compounds,along with the respective characteristic from the intrinsic crystal structure to performance presentation and improvement for SIBs.One of the most important aspect is to discover the essential problems existed in the present V-based polyanionic compounds for high-energy&power applications,and point out most suitable solutions from the crystal structure modulation,interface tailoring and electrode configuration design.Moreover,some scientific issues of V-based polyanionic compounds shall be also proposed and related future direction shall be provided.We believe that this review can serve as a motivation for further development of novel V-based polyanionic compounds and drive them toward high energy&power applications in the near future.     

Enhanced efficiency and stability in Sn-based perovskite solar cells with secondary crystallization growth

The conversion efficiencies reported for Tin(Sn)halide-based perovskite solar cells(PSCs)fall a large gap behind those of lead halide-based PSCs,mainly because of poor film quality of the former.Here we report an efficient strategy based on a simple secondary crystallization growth(SCG)technique to improve film quality for tin halide-based PSCs by applying a series of functional amine chlorides on the perovskite surface.They were discovered to enhance the film crystallinity and suppress the oxidation of Sn²⁺remarkably,hence reduce trap state density and non-irradiative recombination in the absorber films.Furthermore,the SCG film holds the band levels matching better with carrier transport layers and herein favoring charge extraction at the device interfaces.Consequently,a champion device efficiency of 8.07% was achieved alo ng with significant enhancements in VOC and JSC,in contrast to 5.35% of the control device value.Moreover,the SCG film-based devices also exhibit superior stability comparing with the control one.This work explicitly paves a novel and general strategy for developing high performance lead-free PSCs.     

Total synthesis of TRADD death domain with arginine N-GlcNAcylation by hydrazide-based native chemical ligation

TNFR1-associated death domain protein(TRADD)with arginine N-GlcNAcylation is a novel and structurally unique posttranslational modification(PTM)glycoprotein that blocks the formation of death-inducing signaling complex(DISC),orchestrating host nuclear factorκB(NF-κB)signaling in entero-pathogenic Escherichia coli(EPEC)-infected cells.This particular glycosylated modification plays an extremely vital role for the effective colonization and pathogenesis of pathogens in the gut.Herein we describe the total synthesis of TRADD death domain(residues 195-312)with arginine235 NGlcNAcylation(Arg-GIcNAc TRADD(195-312)).Two longish peptidyl fragments of the wild-type primary sequence were obtained by robust,microwave-assisted,highly efficient,solid-phase peptide synthesis(SPPS),the N-GlcNAcylated sector was built by total synthesis and attached specifically to resinbound peptide with an unprotected ornithine residue via silver-promoted on-resin guanidinylation,ArgGlcNAc TRADD(195-312)was constructed by hydrazide-based native chemical ligation(NCL).The facile synthetic strategy is expected to be generally applicable for the rapid synthesis of other proteins with Arg-GIcNAc modification and to pave the way for the related chemically biological study.     

Steam activation of Fe-N-C catalyst for advanced power performance of alkaline hydrazine fuel cells

Alkaline hydrazine liquid fuel cells(AHFC) have been highlighted in terms of high power performance with non-precious metal catalysts.Although Fe-N-C is a promising non-Pt electrocatalyst for oxygen reduction reaction(ORR),the surface density of the active site is very low and the catalyst layer should be thick to acquire the necessary number of catalytic active sites.With this thick catalyst layer,it is important to have an optimum pore structure for effective reactant conveyance to active sites and an interface structure for faster charge transfer.Herein,we prepare a Fe-N-C catalyst with magnetite particles and hierarchical pore structure by steam activation.The steam activation process significantly improves the power performance of the AHFC as indicated by the lower IR and activation voltage losses.Based on a systematic characterization,we found that hierarchical pore structures improve the catalyst utilization efficiency of the AHFCs,and magnetite nanoparticles act as surface modifiers to reduce the interracial resistance between the electrode and the ion-exchange membrane.     

Energy level engineering of charge selective contact and halide perovskite by modulating band offset:Mechanistic insights

Mixed cation and anion based perovskites solar cells exhibited enhanced stability under outdoor conditions,however,it yielded limited power conversion efficiency when TiO₂ and Spiro-OMeTAD were employed as electron and hole transport layer(ETL/HTL)respectively.The inevitable interfacial recombination of charge carriers at ETL/perovskite and perovskite/HTL interface diminished the efficiency in planar(n-i-p)perovskite solar cells.By employing computational approach for uni-dimensional device simulator,the effect of band offset on charge recombination at both interfaces was investigated.We noted that it acquired cliff structure when the conduction band minimum of the ETL was lower than that of the perovskite,and thus maximized interfacial recombination.However,if the conduction band minimum of ETL is higher than perovskite,a spike structure is formed,which improve the performance of solar cell.An optimum value of conduction band offset allows to reach performance of 25.21%,with an open circuit voltage(VOC)of 1231 mV,a current density JSC of 24.57 mA/cm² and a fill factor of 83.28%.Additionally,we found that beyond the optimum offset value,large spike structure could decrease the performance.With an optimized energy level of Spiro-OMeTAD and the thickness of mixed-perovskite layer performance of 26.56% can be attained.Our results demonstrate a detailed understanding about the energy level tuning between the charge selective layers and perovskite and how the improvement in PV performance can be achieved by adjusting the energy level offset.     

A new strategy to access Co/N co-doped carbon nanotubes as oxygen reduction reaction catalysts

Carbon nanotubes(CNTs),as one-dimensional nanomaterials,show great potential in energy conversion and storage due to their efficient electrical conductivity and mass transfer.However,the security risks,time-consuming and high cost of the preparation process hinder its further application.Here,we develop that a negative pressure rather than a following gas environment can promote the generation of cobalt and nitrogen co-doped CNTs(Co/N-CNTs) by using cobalt zeolitic imidazolate framework(ZIF-67) as a precursor,in which the negative pressure plays a key role in adjusting the size of cobalt nanoparticles and stimulating the rearragement of carbon atoms for forming CNTs.Importantly,the obtained Co/N-CNTs,with high content of pyridinic nitrogen and abundant graphitized structure,exhibit superior catalytic activity for oxygen reduction reaction(ORR) with half-wave potential(E_1/2) of 0.85 V and durability in terms of the minimum current loss(2%) after the 30,000 s test.Our development provides a new pathway for large-scale and cost-effective preparation of metal-doped CNTs for various applications.     

Recent Advances of Pure Organic Room Temperature Phosphorescence Materials for Bioimaging Applications

Bioimaging,as a powerful and helpful tool,which allows people to investigate deeply within living organisms,has contributed a lot for both clinical theranostics and scientific research.Pure organic room temperature phosphorescence(RTP)materials with the unique features of ultralong luminescence lifetime and large Stokes shift,can efficiently avoid biological autofluorescence and scattered light through a time-resolved imaging modality,and thus are attracting increasing attention.This review classifies pure organic RTP materials into three categories,including small molecule RTP materials,polymer RTP materials and supramolecular RTP materials,and summarizes the recent advances of pure organic RTP materials for bioimaging applications.     

Combined QSAR/QSPR,Molecular Docking,and Molecular Dynamics Study of Environmentally Friendly PBDEs with Improved Insulating Properties

To improve the insulating properties of polybrominated diphenyl ethers(PBDEs), we studied the molecular structures and energy gap(Eg) values of 209 PBDEs using a three-dimensional quantitative structure-activity relationship(3D-QSAR) model, molecular docking, and molecular dynamics. We also analyzed the interaction mechanisms of PBDEs using a 2D-QSAR model, molecular substitution characteristics, and molecular docking. The 3D-QSAR model showed that the 2-, 4-, 5-, and 6-positions significantly influenced the PBDE insulating properties. Using BDE-34 as a template molecule, we designed six derivatives with 0.47%-28.44% higher insulation tlian BDE-34. Compared with BDE-34, the stability and flame retardancy of the above six derivatives were not adversely affected. These derivatives, except for 2,6-cyanomethyl-BDE, 2-cyanomethyl-BDE, and 2-aniinomethyl-BDE, were more toxic and biodegradable than BDE-34, but showed weaker bioaccumulation and migration abilities than BDE-34. Mechanism analysis showed that the highest occupied orbital energy, the most negative charge, and the dipole moment were the main quantitative parameters that aflected the PBDE insulating properties. PBDE insulation gradually decreased as the number of Br atoms increased. The level of similarity between the substitution patterns on the two benzene rings was significantly correlated with PBDE insulation, with hydrophobic groups having a more significant efiect on PBDE insulation.     

Novel fusiform core-shell-MOF derived in tact metal@carb on composite:An efficient cathode catalyst for aqueous and solid-state Zn-air batteries

Owing to the varied mechanisms of ORR/OER,exploiting cost-effective bifunctional catalysts with robust ORR/OER activities and excellent performances in Zn-air batteries is still a challenge.In this work,the Co/CoO@NSC bifunctional catalyst is obtained by using Zn-MOF@Co-MOF as self-template.The Co/CoO@NSC composite has interconnected porous architecture with in tact metal@carb on structure,exhibiting superior electrocatalytic activities toward ORR and OER that can be comparable with the Pt/C and RuO₂ catalysts,respectively.The Co/CoO@NSC-based aqueous Zn-air battery achieves a high specific capacity(759.7 mAh/g)and energy density(990.5 Wh/kg),and ultra-long rechargeable property(more than 400 h/1200 cycles).The Co/CoO@NSC-based solid-state Zn-air battery also delivers an excellent performance with a long cycle life(more than 143 h/858 cycles).Most importantly,the newly synthesized and recharged Co/CoO@NSC-based solid-state Zn-air battery can be used to light up a 2 V LED lamp for more than 28 h,demonstrating the superior practicability as rechargeable power source.     

Stabilizing High-voltage Cathode Materials for Next-generation Li-ion Batteries

The pressing demand for high-energy/power lithium-ion batteries requires the deployment of cathode materials with higher capacity and output voltage.Despite more than ten years of research,high-voltage cathode mate-rials,such as high-voltage layered oxides,spinel LiNi0.5Mn1.5O4,and high-voltage polyanionic compounds still cannot be commercially viable due to the instabilities of standard electrolytes,cathode materials,and cathode electrolyte interphases under high-voltage operation.This paper summarizes the recent advances in addressing the surface and interface issues haunting the application of high-voltage cathode materials.The understanding of the limitations and advantages of different modification protocols will direct the future endeavours on advancing high-energy/power lithium-ion batteries.     

Suppressing trap states and energy loss by optimizing vertical phase distribution through ternary strategy in organic solar cells

Suppressing the trap-state density and the energy loss via ternary strategy was demonstrated.Favorable vertical phase distribution with donors(acceptors)accumulated(depleted)at the interface of active layer and charge extraction layer can be obtained by introducing appropriate amount of polymer acceptor N2200 into the systems of PBDB-T:IT-M and PBDB-TF:Y6.In addition,N2200 is gradiently distributed in the vertical direction in the ternary blend film.Various measurements were carried out to study the effects of N2200 on the binary systems.It was found that the optimized morphology especially in vertical direction can significantly decrease the trap state density of the binary blend films,which is beneficial for the charge transport and collection.All these features enable an obvious decrease in charge recombination in both PBDB-T:IT-M and PBDB-TF:Y6 based organic solar cells(OSCs),and power conversion efficiencies(PCEs)of 12.5%and 16.42%were obtained for the ternary OSCs,respectively.This work indicates that it is an effective method to suppress the trap state density and thus improve the device performance through ternary strategy.     

Conformational Properties of Comb-shaped Polyelectrolytes with Negatively Charged Backbone and Neutral Side Chains Studied by a Generic Coarse-grained Bead-and-Spring Model

A generic coarse-grained bead-and-spring model,mapped onto comb-shaped polycarboxylate-based(PCE)superplasticizers,is developed and studied by Langevin molecular dynamics simulations with implicit solvent and explicit counterions.The agreement on the radius of gyration of the PCEs with experiments shows that our model can be useful in studying the equilibrium sizes of PCEs in solution.The effects of ionic strength,side-chain number,and side-chain length on the conformational behavior of PCEs in solution are explored.Single-chain equilibrium properties,including the radius of gyration,end-to-end distance and persistenee length of the polymer backbone,shape-asphericity parameter,and the mean span dimension,are determined.It is found that with the increase of ionic strength,the equilibrium sizes of the polymers decrease only slightly,and a linear dependenew of the persistence length of backbone on the Debye screening length is found,in good agreement with the theory developed by Dobrynin.Increasing side-chain numbers and/or side-chain lengths increases not only the equilibrium sizes(radius of gyration and mean span)of the polymer as a whole,but also the persistence length of the backbone due to excluded volume interactions.     

Three-dimensionalization via control of laser-structuring parameters for high energy and high power lithium-ion battery under various operating conditions

Laser-structuring is an effective method to promote ion diffusion and improve the performance of lithium-ion battery(LIB)electrodes.In this work,the effects of laser structuring parameters(groove pitch and depth)on the fundamental characteristics of LIB electrode,such as interfacial area,internal resistances,material loss and electrochemical performance,are investigated,LiNi_0.5Co_0.2Mn_0.3O₂ cathodes were structured by a femtosecond laser by varying groove depth and pitch,which resulted in a material loss of 5%-14%and an increase of 140%-260%in the in terfacial area between electrode surface and electrolyte.It is shown that the importance of groove depth and pitch on the electrochemical performance(specific capacity and areal discharge capacity)of laser-structured electrode varies with current rates.Groove pitch is more im porta nt at low current rate but groove depth is at high curre nt rate.From the mapping of lithium concentration within the electrodes of varying groove depth and pitch by laser-induced breakdown spectroscopy,it is verified that the groove functions as a diffusion path for lithium ions.The ionic,electronic,and charge transfer resistances measured with symmetric and half cells showed that these internal resistances are differently affected by laser structuring parameters and the changes in porosity,ionic diffusion and electronic pathways.It is demonstrated that the laser structuring parameters for maximum electrode performance and minimum capacity loss should be determined in consideration of the main operating conditions of LIBs.     

Ultra-small nanodots coated with oligopeptides providing highly negative charges to enhance osteogenic differentiation of hBMSCs better than osteogenic induction medium

For bone regenerative engineering,it is a promising method to form skeletal tissues differentiating from human bone morrow mesenchyme stem cells(hBMSCs).However,it is still a critical challenge to efficiently control ostogenesis and clearly reveal the influence factor.To this end,the fluorescent gold nanodots(Au NDs) with highly negative charges as osteogenic induction reagent are successfully synthesized,which display better than commercial osteogenic induction medium through the investigations of ALP activity(2.5 folds) and cytoskeleton staining(1.5 folds).Two kinds of oligopeptides with different bio-structures(cysteine,Cys and glutathione,GSH) are selected for providing surficial charges on Au NDs.It is revealed that Au-Cys with more negative charges(-51 mV) play better role than Au-GSH(-19 mV) in osteogenic differentiation,when both of them have same size(~2 nm),sphere shape and show similar cell uptake amount.To explore deeply,osteogenesis related signaling pathways are monitored,revealing that the enhancement of osteogenic differentiation was through autophagy signaling pathway triggered by Au-Cys.And the promotion of highly negative charges in osteogenic diffe rentiation was further proved via sliver nanodots(Ag NDs,Ag-Cys and Ag-GSH) and carbon nanodots(CDs,Cys-CDs and GSH-CDs).This work indicates part of insights during hBMSCs differentiation and provides a novel strategy in osteogenic differentiation process.     

Miniaturized electrochemical sensors and their point-of-care applications

Most of the current analytical methods depend largely on laboratory-based analytical techniques that require expensive and bullky equipment,potentially incur costly testing,and involve lengthy detection processes.With increasing requirements for point-of-care testing(POCT),more attention has been paid to miniaturized analytical devices.Miniaturized electrochemical(MEC)sensors,including different material-based MEC sensors(such as DNA-,paper-,and screen electrode-based),have been in strong demand in analytical science due to their easy operation,portability,high sensitivity,as well as their short analysis time.They have been applied for the detection of trace amounts of target through measuring changes in electrochemical signal,such as current,voltage,potential,or impedance,due to the oxidation/reduction of chemical/biological molecules with the help of electrodes and electrochemical units.MEC sensors present great potential for the detection of targets including small organic molecules,metal ions,and biomolecules.In recent years,MEC sensors have been broadly applied to POCT in various fields,including health care,food safety,and environmental monitoring,owing to the excellent advantages of electrochemical(EC)technologies.This review summarized the state-of-the-art advancements on various types of MEC sensors and their applications in POCT.Furthermore,the future perspectives,opportunities,and challenges in this field are also discussed.     

Recent progress of thin-film photovoltaics for indoor application

Indoor photovoltaics have attracted increasing attentions owing to their great potential in supplying energy for low power devices under indoor light in our daily life.The third generation thin-film solar cells,including dye-sensitized solar cells,perovskite solar cells and organic solar cells,have made rapid progress from the aspect of materials design to photovoltaic performance.This review provides an overview on the recent advances in the development of indoor photovoltaic technologies based on the third generation solar cells.The design principles of advanced thin-film indoor photovoltaics were also summarized according to the characteristics of indoor light and the advantages of the third generation solar cells.Finally,after summarizing the current research progress,the perspective on this topic is provided.     

C-S coupling with nitro group as leaving group via simple inorganic salt catalysis

An efficient and practical synthetic protocol to synthesize nonsymmetrical aryl thioethers by nucleophilic aromatic substitution(S_NAr)reaction of nitroarenes by thiols with potassium phosphate as the catalyst is described.Various moderate to strong electron-withdrawing functional groups are tolerated by the system to provide thioethers in a good to excellent yields.We also showed that the present method allows access to 3 drug examples in a short reaction time.Finally,mechanistic studies suggest that the reaction may form the classic Meisenheimer complex through a two-step additionelimination mechanism.     

Visualizing phase transition of upper critical solution temperature (UCST) polymers with AIE

The stimuli-responsive polymers with upper critical solution temperatures(UCST) are highly attractive for drug delivery applications. However, the phase transition process of UCST polymer is usually characterized by turbidity measurement and electron microscopy, which are significantly restricted by low sensitivity and static observation. In contrary, the fluorescence technique has significant advantages in terms of high sensitivity, easy operation, and dynamic observation. However, the conventional fluorophores suffer from the drawbacks of aggregation-caused quenching(ACQ) after being encapsulated by UCST polymers, which are not suitable for direct visualization of the phase transition process. To tackle this challenge, we herein developed a series of UCST polymers based on polyacrylamides decorated with bile acid and aggregation-induced emission(AIE)-active tetraphenylethene(TPE) groups, which can be used for direct fluorescence monitoring of the phase transition process. Moreover, the AIE-active UCST polymers can serve as drug carriers, which can not only monitor the drug release process under thermal stimuli, but also verify the drug release by fluorescence recovery after thermal stimuli. It is expected that the AIE-active UCST polymers with self-monitoring ability are promising for biomedical applications.     

A highly stable membrane with hierarchical structure for wide pH range flow batteries

A membrane with high stability and ion conductivity in wide pH range is essential for energy storage devices.Here,we report a novel membrane with hierarchical core-shell structure,which demonstrates high stability and ion conductivity,simultaneously under a wide pH range applications.Spectral characterizations and theoretical calculation indicate that the non-solvent induces the chain segment configuration and eventually leads to polymer-polymer phase separation,thus forming hierarchical porous core-shell structure.Benefiting from this structure,an acidic vanadium flow battery(VFB)with such a membrane shows excellent performance over 400 cycles with an energy efficiency(EE)of above 81%at current density of 120 mA cm^-2 and an alkaline zinc-iron flow battery(AZIFB)delivers a cycling stability for more than 200 cycles at 160 mA cm^-2,along with an EE of above 82%.This paper provides a cost-effective and simple way to fabricate membranes with high performance for variety of energyrelated devices.