超声-微波协同萃取分离、气相色谱-质谱联用测定土壤中多环芳烃

建立了常温常压条件下超声-微波协同萃取分离、气相色谱-质谱法（GC-MS）测定土壤样品中微量多环芳烃的方法,结果表明：在土壤含水量和无机盐质量分数分别为10％和6％时,以正已烷-二氯甲烷（1＋1）混合溶液40mL作萃取溶剂,采用100W微波辐射功率（超声振动功率固定为50W）萃取9min,模拟土壤样品中多环芳烃平均回收率可达86．9％,其相对标准偏差为3．6％;通过与索氏抽提、高压密闭微波和开放式微波、直接超声波和间接超声波等萃取方法相比,证明此方法具有样品容量大、萃取时间短、萃取效率高、重现性好等优点。     

微波萃取-气相色谱-质谱法测定文具中16种多环芳烃

采用微波萃取–气相色谱–质谱联用法测定文具中16种多环芳烃的含量。样品用正己烷–丙酮(体积比为1∶1)溶液微波提取,提取液经硅胶固相萃取柱净化,氮吹浓缩,定容后用气相色谱–质谱仪测定。采用DB–5MS色谱柱程序升温分离,选择离子模式采集,外标法定量。16种多环芳烃的质量浓度在0.016～0.80 mg/L范围内与其色谱峰面积呈良好的线性关系,相关系数(r~2)均大于0.999,方法检出限为0.003～0.014 mg/kg,方法定量限为0.01～0.05mg/kg。3水平平均加标回收率为87.1%～113.4%,测定结果的相对标准偏差为1.1%～7.9%(n=6)。该方法检测灵敏度高,操作简便,定量准确,适用于文具中16种多环芳烃的分析检测。     

超声微波协同萃取-气相色谱法测定土壤中邻苯二甲酸酯类化合物

研究了超声微波协同萃取-气相色谱测定土壤中的邻苯二甲酸酯类化合物。考察了萃取溶剂、微波功率、萃取时间等因素对回收率的影响,得到了最佳萃取条件为:以正己烷/丙酮(1∶1)为萃取剂,溶剂用量为60 mL,微波辐射功率为100 W(超声功率固定为50 W),萃取12 min。该条件下,模拟土样中酞酸酯的平均回收率可达92.5%。方法的检出限为0.05~0.16 mg/kg,相对标准偏差(RSD)5.8%。与直接超声、开放式微波萃取法相比,此法具有明显的优势。方法用于实际土样的测定,所得结果与索氏抽提的结果相当。     

微波辅助萃取-气相色谱-质谱法测定大气可吸入颗粒物中痕量多环芳烃

建立了微波辅助萃取－气相色谱－质谱联用测定大气可吸入颗粒物中痕量多环芳烃（PAHs）的分析方法，优化了萃取时间、溶剂用量、微波辐射功率等微波萃取条件，并与超声波萃取方法进行了对照研究。结果表明：除了苊、芴外，微波萃取方法的回收率在85％－130％之间；方法的检出限在0.002-0.016μg/m^3之间。通过实际样品中PAHs的分析表明，该法快速、溶剂用量小，满足痕量分析的要求。     

分散固相萃取-气相色谱-串联质谱法测定蔬菜中多环芳烃及卤代多环芳烃

建立了同时检测蔬菜中16种多环芳烃(PAHs)和11种卤代多环芳烃(X-PAHs)污染水平的分散固相萃取-气相色谱-串联质谱(GC-MS/MS)分析方法。样品中的多环芳烃和卤代多环芳烃经正己烷提取,N-丙基乙二胺吸附剂(PSA)和十八烷基键合硅胶吸附剂(C18)分散固相萃取净化剂净化,气相色谱-串联质谱方法测定,外标法定量。16种PAHs和11种X-PAHs在50,100和200μg/kg添加浓度下的回收率为74.7%～115.1%,相对标准偏差为1.6%～15.3%,方法检出限为0.03～7.4μg/kg。     

微波萃取-GC/MS联用法测定橡胶及其制品中多环芳烃

建立了微波萃取-GC/MS联用法测定橡胶及其制品中16种多环芳烃(PAHs)的方法,通过实验优化了萃取溶剂、萃取时间、萃取温度等微波萃取条件和16种PAHs的分离和测定条件。用加标回收方法试验确定方法的准确度。结果表明:16种PAHs检出限(S/N=5)为0.002~0.01 mg/L,平均回收率为63.58%~100.5%,RSD为1.9%~9.9%。该方法可以满足橡胶及其制品中多环芳烃的检测要求。     

超声萃取-高效液相色谱法测定沉积物中多环芳烃

提出了高效液相色谱法测定沉积物中多环芳烃(PAH′s)含量的方法。样品中多环芳烃用正己烷-丙酮(1+1)混合溶液超声提取,离心分离后,所得萃取液经蒸发浓缩,然后过装有1g无水硫酸钠和2g硅胶的层析柱净化。以Varian PAHs色谱柱为分离柱,不同比例配成的甲醇和水为流动相梯度洗脱,用荧光检测器检测。方法的检出限(3S/N)在0.34～1.52ng.g-1之间。方法用于沉积物中多环芳烃的测定,测定结果的相对标准偏差(n=5)在3.2%～10.6%之间。用标准加入法测定方法的回收率,结果在57.1%～103.4%之间     

大气飘尘中多环芳烃的超声波萃取- 恒能量同步荧光法测定

采用超声波萃取大气飘尘样品中的多环芳烃,样品不需纯化,直接可用于同步荧光分析,超声波萃取效率高,萃取时间短;采用恒能量同步荧光法对多环芳烃进行定性定量,相关系数r>0.999 1,检出限(3δ)在0.013~4.4 ng之间,回收率为80%~132%。     

超声微波协同萃取/气相色谱法测定土壤中的多溴联苯醚

建立了同时测定土壤中7种多溴联苯醚(PBDEs)的超声微波协同萃取/气相色谱测定方法.考察了萃取溶剂的种类和用量、微波功率、萃取时间等因素对模拟土壤中PBDEs回收率的影响,得到了最佳萃取条件:萃取剂为50 mL正己烷-丙酮(1:1),微波辐射功率为90W,萃取时间为10 min.在最佳条件下,PB-DEs在10～40...     

分散液相微萃取-高效液相色谱法测定水和土壤中多环芳烃

以二硫化碳为萃取剂,丙酮为分散剂对水样和土壤样中残留的多环芳烃进行分散液相微萃取。提取液供高效液相色谱仪的二极管阵列检测器和荧光检测器测定。选用LiChrospherPAH色谱柱作为固定相,用乙腈和水以不同比例混合的溶液作为流动相进行梯度淋洗。在优化的试验条件下,对合成水样中多环芳烃的富集倍数达220～560倍,16种多环芳烃可有效分离并测定。16种多环芳烃的检出限(3S/N)在0.002～0.05μg.L-1之间。用标准加入法测得回收率在64%～108%之间,测定值的相对标准偏差(n=7)在2.0%～7.8%之间。     

Determination of Atmospheric Polycyclic Aromatic Hydrocarbons Using Accelerated Solvent Extraction

Abstract

An accelerated solvent extraction (ASE) method has been developed for the determination of polycyclic aromatic hydrocarbons (PAHs) present in both atmospheric particulate and gaseous phases in this study. Extraction parameters such as the combination of solvents, extraction temperature, and static extraction time were investigated and optimized. Effective extraction was achieved using a 3:1 mixture of n-hexane and acetone as extraction solvents at 100°C in 30 min for all the compounds studied. The optimized extraction method was compared with conventional extraction methods and validated using National Institute of Standards and Technology (NIST)–certified standard reference material (SRM) 1649a. The recoveries obtained for certified 12 PAHs were in the range of 82–126% with relative standard deviation (RSD) between 6 and 28%. The validated ASE technique was used followed by gas chromatography–mass spectrometry (GC-MS) for the determination of PAHs distributed between gaseous and particulate phases in the atmosphere of Singapore. Total average concentrations of PAHs in air samples were 33.54 ± 19.32 ng m^?3, with 4.72 ± 2.80 ng m^?3 in particulate phase and 28.82 ± 16.92 ng m^?3 in gaseous phase, respectively. The results obtained from this study are compared to those reported from other areas of the world.     

Use of Ionic Liquid-filled Semipermeable Membrane for Extraction of Polycyclic Aromatic Hydrocarbons in Water

A novel and facile sample preparation method was developed for the extraction of polycyclic aromatic hydrocarbons (PAHs) in aqueous sample solution using 1-butyl-3-methylimidazolium hexafluorophosphate ([C4MIM][PF6]) - filled semipermeable membrane. For 24 hrs extraction of naphthalene, 1-methylnaphthalene, 2-chloronaphthalene, phenanthrene, the result showed that the extraction efficiency, correlation coefficient (R^2) and RSD (n=5) were in therange of 67-102 %, 0.9870-0.9962, and 2.1-5.3 %, respectively.     

气相色谱-质谱法测定塑料玩具中多环芳烃

提出了气相色谱-质谱法测定塑料玩具中16种多环芳烃(PAH′s)含量的方法。样品经正己烷超声提取30min后,40℃水浴氮气吹干。用水、甲醇和正己烷-二氯甲烷(3+2)混合溶剂各5mL溶解残渣,过C18固相萃取柱净化,用正己烷-二氯甲烷(3+2)混合溶液洗脱,所得洗脱液过HP-5MS色谱柱分离,电子轰击离子源检测。16种多环芳烃的质量浓度在0.2～4.0mg·L-1范围内与其峰面积呈线性关系,方法的检出限(3S/N)在0.002～0.021mg·kg-1之间。以聚丙乙烯、聚乙烯、聚氯乙烯或丙烯腈-丁二烯-苯乙烯共聚物等4种材质的塑料玩具为基体,进行加标回收试验,回收率在79.6%～95.2%之间。     

Helical Ullazine-Quinoxaline-Based Polycyclic Aromatic Hydrocarbons

Polycyclic aromatic azomethine ylides (PAMYs) are powerful building blocks in the bottom-up synthesis of internally nitrogen-containing polycyclic aromatic hydrocarbons (N-PAHs) through 1,3-cycloaddition reactions. In this work, the cycloaddition reaction of PAMYs to asymmetric ortho-quinones is presented, which, in contrast to the addition to symmetric para-quinones, facilitates subsequent condensation reactions and allows the synthesis of three helical N-PAHs with ullazine-quinoxaline ( UQ - 1 – 3 ) backbones. UQ - 1 and UQ - 2 possess two helical centers; however, single-crystal X-ray analysis together with the computational modeling of UQ - 3 elucidate the formation of only the thermodynamically most stable geometry with four helical centers in a (P,P,M,M) configuration. For the series UQ - 1 – 3 , the number of redox steps is directly correlated with the number of ullazine or quinoxaline units incorporated into the targeted molecular backbones. A detailed investigation of the spectroscopic and magnetic properties of the radical cation and anion as well as the dication and dianion species by in situ EPR/UV/Vis-NIR spectroelectrochemistry is provided. The excellent optical and redox properties combined with helical geometries render them possibly applicable as chiral emitter or ambipolar charge transport material in organic electronics.     

Supercritical Fluid Extraction of Bivalve Samples for Simultaneous GC-MS Determination of Polychlorobiphenyls and Polycyclic Aromatic Hydrocarbons

Abstract

A method is presented for the simultaneous determination of polychlorobiphenyls and polycyclic aromatic hydrocarbons in bivalve samples. The method implies the fortification of the freeze-dried sample with isotopically labeled internal standards; followed by extraction with supercritical carbon dioxide modified with 3% methanol, then a simple clean-up step on a silicagel packed Pasteur pipette and, finally, determination by gaschomatography-mass spectrometry. The method requires little time and labor compared to traditional methods, uses negligible amounts of solvents and produces little wastes. Sixty different PCB congeners and seven selected PAHs are analyzed. Six replicate analyses were performed on the SRM 2974 certified material and the results are discussed.     

溴代稠环芳烃的氧化溴化法合成

以HBr/H2O2为溴化体系,采用氧化溴化法合成了6种稠环芳烃的溴化物。 合成反应无需催化剂,通过控制反应温度和溴化试剂用量,可以在稠环芳烃化合物的活性位选择性地单溴化或双溴化,产率可达51.1%～94.2%。 产品经熔点和1H NMR法确认,合成操作简单安全,环境污染少,有工业应用前景。     

超声提取/气相色谱-质谱法测定海洋生物中的多环芳烃

建立了海洋生物体中16种优先控制多环芳烃的超声提取/气相色谱-质谱测定方法,对海洋鱼类、虾类、贝类和蟹类等生物样品的提取、净化和色谱质谱条件进行了优化。以正己烷-二氯甲烷(2∶1)作为溶剂进行超声提取,提取液经60%硫酸溶液和中性氧化铝-弗罗里硅土混合层析柱净化,采用气相色谱-质谱法定性和定量分析。在优化条件下,16种多环芳烃的线性范围为0.005～0.500 mg/L,相关系数(r)不低于0.998 4,检出限为0.03～0.28μg/kg。加标水平为2、20、100μg/kg时,平均加标回收率分别为55%～118%、80%～114%和79%～113%,相对标准偏差(RSDs,n=6)均小于10%。该方法快速、准确、灵敏度高、重复性好,能满足海洋生物体中持久性有机污染物分析的要求。     

羟基取代的多环芳烃与一氧化氮的反应研究

内源性的一氧化氮(NO)是多种生理过程中必不可少的信使分子,它在神经系统递质传导、神经发育、脑血流调节以及免疫调节等过程中具有十分重要的作用。为揭示NO生理功能的化学本质,NO成为化学家近年来研究的重要课题之一。     

Relationship between the Biodegradability and Structure of Polycyclic Aromatic Hydrocarbons

21 Physicochemical and quantum chemical parameters of 17 kinds of polycyclic aromatic hydrocarbons were calculated by using semi-empirical MOPAC AM1 method. By means of Partial Least Squares （PLS）, quantitative structure-biodegradation relationship （QSBR） study was performed with the logarithm of specific biodegradation rates （logKb）. The optimal model was obtained, and the result showed that the first-order molecular connectivity index （^1X）, the energy of the lowest unoccupied molecular orbital （Elumo）, logarithm of n-octyl alcohol/water partition coefficient （logP） and torsion energy （Et） are the dominant factors governing the biodegradability of polyeyelie aromatic hydrocarbons, and the effect of second-order valence molecular connectivity index （^2X^V）, the third-order valence molecular connectivity index （^3X^V） and molar refractivity （Rm） should not be ignored.     

Polycyclic Aromatic Hydrocarbons Formation from Fuel and Additives Combustion

A study has been made of the effect of additives to the fuel of a turbulent diffusion flame on the formation of soot and polycyclic aromatic hydrocarbons (PAHs). Fuels containing a polystyrene thickener doped with benzene proved to have many advantages over unthickened fuels. Most significant were an increase in the burning time and the flash point. Nevertheless, polystyrene and benzene additives to a considerable extent increased the formation of soot and PAHs. The analysis of PAHs in this study was made by capillary gas chromatography (GC) and capillary gas chromatography/mass spectrometry (GC/MS). A total of 42 individual compounds were characterized by their retention indices and mass spectra.