Photodissociation of the dimer ions Ar+2, Ne+2, and (CO2)+2

The tandem quadrupole photodissociation mass spectrometer has been used to study photodissociation reactions of Ar⁺₂, Ne⁺₂, and (CO₂)⁺₂. The cross sections for photodissociation of Ar⁺₂ exhibited a strong dependence on ion source pressure, varying from 2 × 10 ^?18cm² at 0.1 torr to 6 × 10^?19cm² at 0.5 torr. A large photodissociation cross section (2 × 10^?17cm² for the reaction (CO₂)⁺₂ → CO⁺₂+ CO₂ was observed at the red end of the visible spectrum (580–620 nm) suggesting that this may be an important reaction in CO₂ rich planetary ionspheres such as that of Mars.     

UV light-assisted mineralisation and biodetoxification of Ponceau S with hydroxyl and sulfate radicals

The present study reports simultaneous mineralisation and biodetoxification of Ponceau S (3-hydroxy-4-(2-sulfo-4-[4-sulfophenylazo]phenylazo)-2,7-naphthalenedisulfonic acid sodium salt), an azo dye, by UV light assisted oxidation with hydroxyl and sulfate radicals. Metal ion catalysts used in the work were: Fe²⁺ and Ag⁺, and the oxidants used were: hydrogen peroxide and S₂O₈^2?. Strategies adopted to make the processes environmentally benign and economically viable by achieving maximum mineralisation in the shortest possible time are described. Mineralisation efficiency (Em) of various systems was found to follow the order: E_m(Fe²⁺/H₂O₂/UV) > E_m(Fe²⁺/S₂O₈^2?/UV) > E_m(Ag⁺/H₂O₂/UV) ≈ E_m(Ag⁺/S₂O₈^2?/UV). Thus, Fe²⁺ and HP are the most suitable metal ion catalyst and oxidant respectively, showing higher efficiency at pH 3 followed by that at pH 6.6. It is possible to enhance the Fe²⁺/H₂O₂/UV process electrical energy efficiency by maintaining the concentration of Fe at either 0.05 mM or 0.03 mM and that of the oxidant at 2.5 mM. The bioassay study revealed that the Fe²⁺/S₂O₈^2?/UV process biodetoxification efficiency is higher at pH 3 (93.7 %) followed by that at pH 6.6 (80.1 %) at the concentration of Fe ²⁺ and S₂O₈^2? of 0.03 mM and 2.5 mM, respectively. Thus, not only the concentration of Fe²⁺, but also the nature of the oxidant and pH play an important role in the biodetoxification process and S₂O₈^2? possesses higher biodetoxification efficiency than H₂O₂.     

Infrared multiple-photon dissociation of N2H4 and CH3NH2 fluence dependence of the production of NH2

The multiple-photon dissociation of N₂H₄ and CH₃NH₂ by pulsed CO₂ laser light to produce NH₂(X?²B_I has been studied using the laser-induced fluorescence detection method. The relative NH₂ yield, represented by the fluorescence signal, has been measured as a function of the fluence from the threshold at about 0.1 J/cm² to about 100 J/cm², at different CO₂-laser lines and at pressures down to 10^?4 Torr.     

Polarographic reduction of aqueous sulfur dioxide

Direct- and alternating-current polarograms of aqueous SO₂ · OH₂ solutions show four reduction waves, more than previously reported. Waves I and II probably result from the electroreduction of SO₂ · OH₂ and HSO⁻₃, respectively; these two waves completely overlap at pH 1 but are partially resolved at higher pH values due to different pH dependence. Reduction of SO₂ · OH₂ involves two electrons and two H⁺ ions and the initial product is probably sulfoxylic acid, H₂SO₂. This product can disproportionate to S⁰ and SO₂ · OH₂ in very acidic media (pH ≤ 1) and, in the limit, double the reduction current of SO₂ · OH₂. Reduction of HSO⁻₃ appears to occur via two paths: one is a two-electron three-H⁺ ion path and the other is a one-electron one-H⁺ ion path. The former dominates at pH ≤ 3 and probably produces H₂SO₂; the latter dominates at pH > 4 and may produce SO⁻₂. H₂SO₂ in less acidic media can react with HSO⁻₃ to yield dithionite species (such as H₂S₂O₄, HS₂O⁻₄ and S₂O²⁻₄) and HSO₂ and SO⁻₂ by dissociation of the dithionite species. Waves III and IV are believed to result from reduction of HSO₂ and SO⁻₂, respectively, to H₂SO₂ species.     

Solid–liquid Equilibria in the Quaternary System Na+, Mg2+//Cl–, SO2–4–H2O at 25 and 30°C

The isoplethic sections in the diagram of the quaternary system Na⁺ , Mg²⁺ //Cl^– , SO^2– ₄ –H₂ O were established at 25 and 30oC by analytical and conductometric measurements. Three compounds can be observed in the isoplethic sections: NaCl, Na₂ SO₄ and MgNa₂ (SO₄ )₂ 4 H₂ O. Seven fields are determined, relating to the precipitation of one, two or three salts. The solubility range of MgNa₂ (SO₄ )₂ 4 H₂ O is wide, while the liquidus curve of Na₂ SO₄ is very short. The compositions, expressed in Jänecke coordinates, at the eutonic and peritonic points, respectively, were: 42.70% Cl^– and 745% H₂ O; 79.47% Cl^– and 787% H₂ O; 71.6% Cl^– and 744% H₂ O at 25°C; and 48.80% Cl^– and 715% H₂ O; 80.20% Cl^– and 778% H₂ O; 70.14% Cl^– and 707% H₂ O at 30°C.     

Resonance raman scattering from metastable O2 molecules in γ-irradiated NaClO3

Resonance Raman scattering has been observed from metastable O₂ molecules produced in single crystals of NaClO₃ by γ-irradiation at 300 K. Evidence that the observed bands are due to O₂ is provided by the Raman spectrum of irradiated ¹⁸O enriched NaClO₃ in which bands due to ¹⁶O₂, ¹⁶O ¹⁸O, and ¹⁸O₂ were identified. The Raman band at 1544 cm^?1 ascribed to metastable O₂ disappears on bleaching with intense 4880 Å radiation enabling the identification of a weaker band at 1557 cm^?1 that is assigned to the stable form of O₂.     

An ESR study of electron transfer and oxygen adsorption on 95Mo supported catalysts

ESR studies using molybdenum enriched in ⁹⁵Mo have confirmed that (O₂^?)_s is stabilised at Mo⁶⁺ sites at 77 K on silica and alumina supported molybdenum. Warming the Mo/Al₂O₃ to 300 K leads to an increase in the number of (O₂^?)_s ions observed due to electron transfer from reduced molybdenum sites to give additional (O₂^?)_s adsorbed at Al³⁺ sites on the support. Molybdenum is not involved at the adsorption site of (O₂^?)_s on the magnesia supported catalyst.     

The Decomposition of Aqueous Dithionite and its reactions with polythionates SnO2−6 (n = 3–5) studied by ion-pair chromatography

Aqueous dithionite decomposes at 20°C and pH values not far from 7.0 to give thiosulfate and sulfite from which trithionate may form. Addition of thiosulfate accelerates this reaction only at pH < 6. The pH dependence is explained by formation of HS₂O₃^? ions which are reduced by dithionite to HS^? and SO^2?₃. Sulfide destroys dithionite by nucleophilic cleavage, probably with formation of sulfoxylate and thiosulfite ions. The polythionates S_nO^2?₆ (n = 3–5) are reduced by dithionite at pH = 7.0 and 20°C according to S_nO^2?₆ + S₂O^2?₄ + 2 H₂O→S₂O₃^2? + S_n–3SO₃^2? + 4H¹ + 2SO₃^2? The reaction rate rapidly increases with the number n of sulfur atoms. In secondary reactions sulfite attacks S_nO₆^2? ions with thiosulfate formation.     

一种检测CO32-比率荧光探针的合成及其在细胞成像中的应用

本文设计开发了一种以2,6-二甲酰基对甲苯酚为母体的新型荧光探针HMI,可用于高效识别EtOH-H₂O (8/2, v/v, HEPES 10 mM, pH =7.4)体系中的CO_3^2-。HMI在660 nm处显示发射带,加入CO_3^2-后,在600 nm的等吸收点激发时,原来在660 nm处的荧光淬灭,而以540 nm为中心的新发射带荧光显着增加,为比率型荧光探针。HMI对CO_3^2-表现出高选择性且具有较强的抗干扰能力。此外,荧光探针HMI对CO_3^2-荧光响应的检测限较低,可达到3.938×10^_-6 M。更具有意义的是,HMI探针对CO_3^2-的检测能够在实际水样中起到很好的应用,而且细胞成像研究表明,HMI可用于活体MCF-7细胞中CO_3^2-的成像。     

Mediated bioelectrocatalytic O2 reduction to water at highly positive electrode potentials near neutral pH

Combinations of bilirubin oxidase and metal complexes: [W(CN)₈]^3−/4−, [Os(CN)₆]^3−/4− and [Mo(CN)₈]^3−/4− (the formal potentials, E^0′(M), being 0.320, 0.448, and 0.584 V vs. Ag|AgCl, respectively, at pH 7.0), allowed bioelectrocatalytic reduction of O₂ to water at their formal potentials near neutral pH. The O₂ reduction current appeared even at the standard potential of the O₂/H₂O redox couple, E^0′(O₂/H₂O), when [Mo(CN)₈]^3−/4− was used at pH 7.4, though the magnitude was small. The magnitude of the bioelectrocatalytic current systematically decreased with the decrease in the potential difference between E^0′(O₂/H₂O) and E^0′(M). A limiting current as large as 17 mA/cm² of a projected electrode surface area was obtained at 0.25 V (−0.37 V vs. E^0′(O₂/H₂O)) for the O₂ reduction at pH 7.0 with a carbon felt electrode modified with electrostatically entrapped bilirubin oxidase and [W(CN)₈]^3−/4− at the electrode rotation rate of 4000 rpm.     

Aromatic protonation—4: On the 1H-2H exchange of three 9-n-alkylanthracenes on reaction with CF3CO2[2H] and FSO3[2H]

The reactions of 9-methyl-, 9-ethyl- and 9-propyl-anthracene with CF₃CO₂[²H] in C[²H]Cl₃ and with FSO₃[²H] in SO₂ClF have been investigated. Using 4 equivalents of CF₃CO₂[²H] at 50° ¹H-²H exchange was observed only for the 10-H and the side-chain α-hydrogens, and on using 8 and 12 equivalents at 50° also for the aromatic α-hydrogens. Treatment of the substrates with FSO₃[²H] at -60° leads to the stable 9-alkyl-[10-²H]-10-anthracenium ions. On warming up to ?25° a slow ¹H-²H exchange of only the 10-¹H of these anthracenium ions is observed. A mechanism for the ¹H-²H exchange of the aromatic and the side-chain α-hydrogens of the 9-alkylanthracenes is presented.     

Low‐Temperature N2 Binding to Two‐Coordinate L2Fe0 Enables Reductive Trapping of L2FeN2− and NH3 Generation

The two‐coordinate [(CAAC)₂Fe] complex [CAAC=cyclic (alkyl)(amino)carbene] binds dinitrogen at low temperature (T2 complex, [(CAAC)₂Fe(N₂)], was trapped by one‐electron reduction to its corresponding anion [(CAAC)₂FeN₂]^? at low temperature. This complex was structurally characterized and features an activated dinitrogen unit which can be silylated at the β‐nitrogen atom. The redox‐linked complexes [(CAAC)₂Fe^I][BAr^F₄], [(CAAC)₂Fe⁰], and [(CAAC)₂Fe^?IN₂]^? were all found to be active for the reduction of dinitrogen to ammonia upon treatment with KC₈ and HBAr^F₄?2 Et₂O at ?95 °C [up to (3.4±1.0) equivalents of ammonia per Fe center]. The N₂ reduction activity is highly temperature dependent, with significant N₂ reduction to NH₃ only occurring below ?78 °C. This reactivity profile tracks with the low temperatures needed for N₂ binding and an otherwise unavailable electron‐transfer step to generate reactive [(CAAC)₂FeN₂]^?.     

A theoretical study of protonation of triatomic silicon–carbon compounds

Ab initio molecular orbital methods are employed to study the low-lying states of C₃H⁺, SiC₂H⁺, Si₂CH⁺, and Si₃H⁺. Special attention is paid to a comparative study between C₃H⁺ and Si₃H⁺. In both cases a ³B₂ state is found to lie the lowest at the HF level, although inclusion of correlation effects favor a linear structure (¹Σ⁺ state) for C₃H⁺, which lies 25 kcal/mol below the ³B₂ state at the MP 4 level, and a bent structure (¹A′ state) for Si₃H⁺, which lies just 2 kcal/mol below the ³B₂ state. The proton affinities of C₃, SiC₂, Si₂C, and Si₃ are estimated at different levels of theory. Both protonation at carbon and silicon atoms are considered for SiC₂ and Si₂C. It is found that C₃ comparatively has a low proton affinity. On the other hand, Si₃ has a relatively high proton affinity compared with the protonation at silicon atom for both SiC₂ and Si₂C. These results are discussed on the basis of electronic structure arguments.     

Ca2+‐Induced Oxygen Generation by FeO42− at pH 9–10

Although FeO₄^2? (ferrate(IV)) is a very strong oxidant that readily oxidizes water in acidic medium, at pH 9–10 it is relatively stable (<2 % decomposition after 1 h at 298 K). However, FeO₄^2? is readily activated by Ca²⁺ at pH 9–10 to generate O₂. The reaction has the following rate law: d[O₂]/dt=k_Ca[Ca²⁺][FeO₄^2?]². ¹⁸O‐labeling experiments show that both O atoms in O₂ come from FeO₄^2?. These results together with DFT calculations suggest that the function of Ca²⁺ is to facilitate O–O coupling between two FeO₄^2‐ions by bridging them together. Similar activating effects are also observed with Mg²⁺ and Sr²⁺.     

Ultramicroporous Building Units as a Path to Bi‐microporous Metal–Organic Frameworks with High Acetylene Storage and Separation Performance

A strategy called ultramicroporous building unit (UBU) is introduced. It allows the creation of hierarchical bi‐porous features that work in tandem to enhance gas uptake capacity and separation. Smaller pores from UBUs promote selectivity, while larger inter‐UBU packing pores increase uptake capacity. The effectiveness of this UBU strategy is shown with a cobalt MOF (denoted SNNU‐45) in which octahedral cages with 4.5 Å pore size serve as UBUs. The C₂H₂ uptake capacity at 1 atm reaches 193.0 cm³ g^?1 (8.6 mmol g^?1) at 273 K and 134.0 cm³ g^?1 (6.0 mmol g^?1) at 298 K. Such high uptake capacity is accompanied by a high C₂H₂/CO₂ selectivity of up to 8.5 at 298 K. Dynamic breakthrough studies at room temperature and 1 atm show a C₂H₂/CO₂ breakthrough time up to 79 min g^?1, among top‐performing MOFs. Grand canonical Monte Carlo simulations agree that ultrahigh C₂H₂/CO₂ selectivity is mainly from UBU ultramicropores, while packing pores promote C₂H₂ uptake capacity.     

Laser-induced photoionization of Ar2(3Σu+) at 308 nm

Experimental evidence is provided to show that the Ar₂(³Σ⁺_u) excimer is photoionized by absorption of light at 308 nm. This direct photoionization of Ar₂(³Σ⁺_u) was used to measure the distribution of atomic states belonging to the Ar(3p⁵4p) electronic manifold produced in dissociative recombination of Ar₂⁺(²Σ_u⁺) at atmospheric pressure. It was found that electronically excited states, Ar(2p₂) and Ar(2p₁₀), accounted for 96% of the excited state population of the Ar(3p⁵4p) configuration produced in dissociative recombination. The Ar₂(³Σ_u⁺) state is also photodissociated directly at 308 nm producing electronically excited Ar atoms more energetic than the Ar(3p⁵4p) configuration.     

UV absorption cross sections of HO2NO2 vapor

The UV absorption cross sections for gas phase pernitric acid (HO₂NO₂) were measured between 190 and 330 nm at 298 K and 1 atm total pressure. The HO₂NO₂ vapor was prepared in a flowing stream of nitrogen in the presence of H₂O, H₂O₂, HNO₃ and NO₂. The composition of the mixture was established by visible and IR absorption spectroscopy and by chemical titration after absorption in aqueous solutions. The HO₂NO₂ cross sections ranged from approximately 10⁻¹⁷ cm² molecule⁻¹ at 190 nm to about 10⁻²¹ cm² molecule⁻¹ at 330 nm. The experimental uncertainty (one standard deviation) ranged from 5% at 200 nm to 30% at 330 nm and fell mainly in the 10% range. The solar photodissociation rate in the troposphere and lower stratosphere was estimated to be about 10⁻⁵ s⁻¹ for a solar zenith angle of 0°.     

Infrared spectra of Ca+NO− and Ca+NO−2 in solid argon at 15 K

Calcium atoms have been reacted with NO and NO₂ upon condensation at high dilution in argon at 15 K. Infrared absorptions at 1357 and 455 cm^?1 show appropriate isotopic shifts to be due to (N ? ; O)^? and Ca⁺ ? ; (NO)^? vibrations in the Ca⁺NO^? species. A strong band at 1244 cm^?1 is due to ν₃ of NO^?₂ in the Ca⁺NO^?₂ complex.     

A New Mode of Energy Transfer between Mn2+ and Eu2+ in Nitride‐Based Phosphor SrAlSi4N7 with Tunable Light and Excellent Thermal Stability

In this work, reciprocal energy transfer between Mn²⁺ and Eu²⁺ ions in nitride SrAlSi₄N₇ has been found and investigated in detail. In contrast to Mn²⁺‐ and Eu²⁺‐activated oxide‐based phosphors, the red light centered at 608 nm is ascribed to 4f–5d transitions of Eu²⁺ ions and Mn²⁺‐activated SrAlSi₄N₇ emits a cyan light peaking at 500 nm. Additionally, the special broad excitation band of SrAlSi₄N₇:Mn²⁺ centered at 362 nm has been covered by that of Eu²⁺ ions ranging from 300 to 550 nm. The overlap of the energy level of Mn²⁺ and Eu²⁺ ions creates the conditions for reciprocal energy transfer between Eu²⁺ and Mn²⁺ ions. A series of SrAlSi₄N₇:0.002 Mn²⁺,xEu²⁺ (0≤x≤005) with tunable light emission have been synthesized and the decay curves of samples prove the reciprocal occurrence of the energy transfer between Mn²⁺ and Eu²⁺ ions. This mode of energy transfer not only prevents the loss of energy, but also improves the thermal stability, and the intensity of SrAlSi₄N₇:Mn²⁺,Eu²⁺ at 150 °C is still beyond 92 % of the initial intensity. The results provide a new mode of energy transfer, which is expected to reduce the drawbacks existing in energy transfer.     

Additions- und SubstitutionsReaktionen an Tetrafluor- und Tetrachlordiboran(4)

Addition and Substitution Reactions at Tetrafluoro- and Tetrachlorodiborane(4) From equimolar mixtures of B₂F₄ and Me_nN(SiMe₃)_3-n (n = 0–3) the mono-addition products 1–4 are formed at low temperatures. By elimination of Me₃SiF the adduct 2 gives the dimeric monosubstituted diborane 8 , which slowly decomposes at room temperature to the aminoborane 6 and (BF)_n. The course of the reactions was studied by means of ¹¹B and ¹⁹F NMR spectroscopy and by measuring the vapor pressures. According to the ¹¹B and ³¹P NMR spectra the reaction of B₂Cl₄ with PCl₅ or [Me₄N]Cl in liquid hydrogen chloride at 0°C does not yield [PCl₄]₂⁺[B₂Cl₆]^2? or [Me₄N]₂⁺[B₂Cl₆]^2? but gives [PCl₄]⁺[BCl₄]^?, PCl₃ and BCl₃ or [Me₄N]⁺[BCl₄]^? and BCl₃ besides (BCl)_n.