复合沉淀剂制备的CeO2-ZrO2-Al2O3材料及其负载的单Pd三效催化剂

采用了一种由氨水和碳酸铵组成的复合沉淀剂来制备CeO₂-ZrO₂-Al₂O₃ （CZA）复合氧化物。作为对比,分别采用氨水和碳酸铵为沉淀剂制备了另外两个CZA复合氧化物。系统地研究了各CZA材料在织构、结构、氧化还原性能、热老化行为之间的区别,以及其负载的单Pd三效催化剂的催化性能。结果表明,不同的沉淀剂制得的材料中其CeO₂-ZrO₂ （CZ）和Al₂O₃之间的相互作用不同。用氨水做沉淀剂时,得到的材料中CZ和Al₂O₃之间的相互作用很小,导致其热稳定性较差。在碳酸铵做沉淀剂的情况下,CZ和Al₂O₃之间具有很强的相互作用,可以提高材料的热稳定性,但同时,CZ固溶体的均一性被严重破坏,使得材料的氧化还原性能不理想。而复合沉淀剂的使用可以有效地平衡CZ和Al₂O₃之间的相互作用,导致得到的CZA材料具有优异的织构、结构性能及良好的热稳定性。因此,其负载的单Pd催化剂表现出最为优异的氧化还原性能和三效催化活性。     

Fe2O3晶型对Fe基催化剂的CO2加氢性能影响

以共沉淀法制备FeAl母体,采用浸渍法添加Zn、K和Cu助剂制成催化剂,利用低温N2物理吸附、XRD、H2-TPR等手段对FeAl母体和催化剂进行表征,并用固定床反应器考察它们的CO₂加氢反应性能。XRD结果表明,加入Al助剂、并采用无水乙醇洗涤沉淀能促进酌-Fe₂O₃晶相生成,其中,Al₂O₃/Fe₂O₃质量比为10%的母体具有最强的酌-Fe₂O₃衍射峰;加入Al使得母体中的a-Fe₂O₃晶粒粒径变小,引起比表面积明显增大;浸渍助剂过程没有改变上述两种效应。母体比表面积增大提高了助剂Cu的分散度,促进了催化剂还原,但酌-Fe₂O₃晶相的生成才是催化剂的CO₂加氢反应活性被提高的主要原因。     

鸡蛋壳负载Co3O4催化剂制备及其N2O分解性能研究

采用废弃的鸡蛋壳作载体,沉积沉淀法制备了一系列不同Co₃O₄含量Co₃O₄/鸡蛋壳催化剂,并在连续流动微反装置上考察了N₂O分解性能。结果表明,当Co₃O₄质量分数为20%时,催化剂表现出优异的N₂O分解性能。在空速10000 h^-1和N₂O含量0.1%的条件下,400℃可实现N₂O完全转化;其比活性约为Co₃O₄催化剂的4.3倍(反应温度为440℃);同时,该催化剂对原料气中3%O₂、3.3%H₂O和/或2.0×10^-4 NO表现出较强的耐受性和较高的稳定性。分析催化剂的多种表征结果发现,CaCO₃作为鸡蛋壳的主要成分,与活性组分Co3O4紧密结合,两者的强相互作用导致20%Co₃O_4...     

P改性对Mo-Ni/Al2O3煤焦油加氢脱氮性能的影响

在磷含量1.34%下,采用分步浸渍法按磷添加顺序不同制备了3种改性催化剂:MoP-Ni/Al₂O₃、Mo-NiP/Al₂O₃、Mo-Ni/PAl₂O₃.通过X射线衍射(XRD)、程序升温脱附(NH₃-TPD)、程序升温还原(H₂-TPR)、氮气吸附等技术对催化剂进行了表征.以新疆中低温煤焦油为原料,考察了不同磷改性方式对催化剂加氢脱氮(HDN)性能的影响.结果表明,适宜的磷添加方式能够改变催化剂的酸性分布,提高10~13 nm加氢脱氮有效孔的比例,并且减弱活性组分与载体的相互作用,同时使得活性组分更易被还原,进而提高催化剂加氢脱氮性能.加氢脱氮活性顺序为Mo-Ni/PAl₂O₃(74.36%)>Mo-NiP/Al₂O₃(72.74%)>Mo-Ni/Al₂O₃(71.72%)>MoP-Ni/Al₂O₃(56.13%).     

La2O3/γ-Al2O3催化剂用于二甲醚二氧化碳重整制氢

采用等体积浸渍法制备了不同负载量的La₂O₃/γ-Al₂O₃催化剂,并考察了负载量和反应温度对催化剂用于二甲醚二氧化碳重整制氢反应的性能影响。结果表明,反应温度为550℃、La₂O₃负载量为15%时,催化剂表现出最好的性能：二甲醚的转化率为100%,二氧化碳的转化率达到85.4%,产物氢气的选择性高达93.3%,一氧化碳的选择性为76.04%,副产物甲烷的选择性仅为6.3%。550 ℃时其平均积炭速率为1.387 5 mg/（g·h）。研究还利用XRD、BET、TEM、TG等方法对催化剂进行了表征。     

V2O5-Sb2O3-TiO2催化剂 低温NH3还原NO及其抗H2O和SO2毒化性能

浸渍法制备了催化剂V₂O₅-Sb₂O₃-TiO₂,考察了V₂O₅、Sb₂O₃负载量、pH值和焙烧温度对催化剂V₂O₅- Sb₂O₃-TiO₂低温氨选择性催化还原(SCR)NO活性的影响;同时,考察了催化剂V₂O₅-Sb₂O₃-TiO₂抗H₂O和SO₂毒化性能。结果表明,V₂O₅和Sb₂O₃负载量分别为5%和2%、焙烧温度为400℃、pH值为4时,催化剂SCR活性最好,反应温度220℃时,可达97%。Sb₂O₃的加入不仅能增强V₂O₅/TiO₂的催化活性,而且能明显提高催化剂的抗H₂O和SO₂毒化性能。SO₂、NO吸附暂态反应和TG-DTG测试表明,Sb₂O₃的促进机制主要是促进了催化剂在SO₂存在条件下对NO的吸附,同时,减弱了硫酸铵盐与催化剂之间的相互作用,硫酸铵盐更容易分解。     

γ-Al2O3对SCR脱硝催化剂V2O5-WO3/TiO2的改性研究

采用溶胶凝胶法制备了不同γ-Al₂O₃含量的钛铝复合载体,以此为载体采用浸渍法负载V₂O₅和WO₃制备了一系列催化剂。采用X射线衍射(XRD)、比表面积测定(BET)、程序升温还原(H₂-TPR)、高分辨率透射电子显微镜(HRTEM)等表征技术对催化剂表面形态进行分析,同时在模拟氨气选择性催化还原NO(NH₃-SCR)的反应条件下,对催化剂的脱硝反应活性和SO₂抗中毒进行考察。结果发现,TiO₂和γ-Al₂O₃之间的协同作用使得V₂O₅-WO₃/TiO₂-γ-Al₂O₃催化剂的脱硝效率及活性窗口明显优于单一载体制备的催化剂,表现出了良好的热稳定性和抗SO₂毒化能力,特别是V₂O₅-WO₃/TiO₂-15% γ-Al₂O₃在310~460 ℃,NO的转化率均在80%以上,反应窗口最宽。各种表征结果表明,TiO₂-γ-Al₂O₃复合载体中γ-Al₂O₃高度分散在TiO₂上,复合载体具有较大的比表面积,同时具有较强的还原能力。     

Pd@SiO2/Al2O3的制备及其催化氧化CO性能评价

从Pd纳米粒子出发制备具有核壳结构的Pd@SiO₂纳米粒子,并将其负载于不同形貌Al₂O₃载体上,制备出具有良好CO催化氧化活性的催化剂。以纳米球形Al₂O₃为载体时,Pd@SiO₂/Al₂O₃催化剂活性优于无核壳结构的Pd/Al₂O₃催化剂。将纳米Pd@SiO₂负载到球形和菱形Al₂O₃上,制备出Pd@SiO₂/Al₂O₃催化剂。结果表明:具有较大比表面积的Al₂O₃载体(球形)有利于Pd@SiO₂的分散,且SiO₂层可以抑制Pd粒子的团聚,能在一定程度上改善催化活性。而较小比表面积的载体(菱形)上出现了Pd@SiO₂的团聚,表现出较低的CO氧化活性,但在降低负载量后,CO氧化活性明显提高。该结果为推动新型热稳定、高效纳米三效催化剂的研发具有一定的启示意义。     

复合沉淀剂制备的CeO_2-ZrO_2-Al_2O_3材料及其负载的单Pd三效催化剂（英文）

采用了一种由氨水和碳酸铵组成的复合沉淀剂来制备CeO_2-ZrO_2-Al_2O_3(CZA)复合氧化物。作为对比,分别采用氨水和碳酸铵为沉淀剂制备了另外两个CZA复合氧化物。系统地研究了各CZA材料在织构、结构、氧化还原性能、热老化行为之间的区别,以及其负载的单Pd三效催化剂的催化性能。结果表明,不同的沉淀剂制得的材料中其CeO_2-ZrO_2(CZ)和Al_2O_3之间的相互作用不同。用氨水做沉淀剂时,得到的材料中CZ和Al_2O_3之间的相互作用很小,导致其热稳定性较差。在碳酸铵做沉淀剂的情况下,CZ和Al_2O_3之间具有很强的相互作用,可以提高材料的热稳定性,但同时,CZ固溶体的均一性被严重破坏,使得材料的氧化还原性能不理想。而复合沉淀剂的使用可以有效地平衡CZ和Al_2O3_之间的相互作用,导致得到的CZA材料具有优异的织构、结构性能及良好的热稳定性。因此,其负载的单Pd催化剂表现出最为优异的氧化还原性能和三效催化活性。     

CoAl2O4/Al2O3载体对钴基费托催化剂反应性能影响的研究

通过浸渍和高温焙烧,制得表面附着CoAl₂O₄微晶颗粒的改性Al₂O₃载体,并采用等体积浸渍法制备负载型Co基催化剂。结合 N₂物理吸附、XRD、H₂-TPR、XPS及H₂化学吸附等表征手段,研究改性载体及其负载钴基催化剂的织构特征;采用费托合成反应评价其催化性能。结果表明,Al₂O₃改性后,表面CoAl₂O₄的存在有效减少了载体与活性组分Co的相互作用,显著提高了催化剂的还原度和催化活性。载体的改性量在20%左右达到最佳值,继续增加,催化剂还原度和活性基本不再升高。载体改性促使催化剂CH₄选择性有所降低,C₅₊选择性略有提高。     

Sm2O3Ga2O3 and Gd2O3Ga2O3 phase diagrams

Four definite compounds exist in the Sm₂O₃Ga₂O₃ binary phase diagram, namely: Sm₃GaO₆, Sm₄Ga₂O₉, SmGaO₃, and Sm₃Ga₅O₁₂. The $\text{3}\text{1}$ compound is orthorhombic (space group Pnna - Z.4) with the cell parameters: a = 11.40₀Å, b = 5.51₅Å, c = 9.07Å and belongs to the oxysel family. Sm₃GaO₆ and SmGaO₃ melt incongruently at 1715 and 1565°C; Sm₄Ga₂O₉ and Sm₃Ga₅O₁₂ have a congruent melting point at 1710 and 1655°C. With regard to the Gd₂O₃Ga₂O₃ system three definite compounds have been identified: Gd₃GaO₆, Gd₄Ga₂O₉, and Gd₃Ga₅O₁₂. Only the garnet melts congruently at 1740°C with the following composition: Gd_3.12Ga_4.88O₁₂. Gd₃GaO₆, and Gd₄Ga₂O₉ melt incongruently at 1760 and 1700°C. GdGaO₃ is only obtained by melt overheating which may yield an equilibrium or a metastable phase diagram.     

Garnet-perovskite transformations in the Sm2O3Ga2O3 and Gd2O3Ga2O3 systems

The effect of heating garnet melts to various temperatures has been investigated. The previously reported decomposition of the garnet phase due to loss of Ga₂O₃ was corroborated. However, it was also observed that when gallium oxide loss is prevented and the maximum temperature of the melt exceeds a critical value, phase separation of garnet to perovskite and β-gallium oxide occurs:

$\text{RE}{}_3\text{Ga}{}_5\text{O}{}_{12}\text{?3RE}\text{GaO}{}_3\text{+}\text{Ga}{}_2\text{O}{}_3$

.The reverse reaction will occur by reheating the two-phase mixture to the garnet melting point.     

Structural changes resulting from doping Ti2O3 with Sc2O3 or Al2O3

The crystal structures of (Ti_1?xSc_x)₂O₃, x = 0.0038, 0.0109, and 0.0413, and of (Ti_0.99Al_0.01)₂O₃, have been determined from X-ray diffraction data collected from single crystals using an automated diffractometer, and have been refined to weighted residuals of 25–34. Cell constants have also been determined for x = 0.0005, 0.0019, and 0.0232. The compounds are rhombohedral, space group $\text{R}\text{3}\text{c}$, and are isomorphous with α-Al₂O₃. The hexagonal cell dimensions range from a = 5.1573(2)Å, c = 13.613(1)Å for (Ti_0.9995Sc_0.0005)₂O₃ to a = 5.1659(4)Å, c = 13.644(1)Å for (Ti_0.9587Sc_0.0413)₂O₃, and a = 5.1526(2)Å, c = 13.609(1)Å for (Ti_0.99Al_0.01)₂O₃. Sc and Al substitution cause similar increases in the short near-neighbor metal-metal distance across the shared octahedral face; for Sc doping the increase is from 2.578(1) Å in pure Ti₂O₃ to 2.597(1) Å in (Ti_0.9587Sc_0.0413)₂O₃. By contrast, changes in the metal-metal distance across the shared octahedral edge appear to be governed by ionic size effects. The distance increases from 2.994(1) Å in Ti₂O₃ to 3.000(1) Å in (Ti_0.9587Sc_0.0413)₂O₃ and decreases to 2.991(1) Å in (Ti_0.99Al_0.01)₂O₃.     

Ion-beam irradiation of lanthanum compounds in the systems La2O3-Al2O3 and La2O3-TiO2

Thin crystals of La₂O₃, LaAlO₃, La_2/3TiO₃, La₂TiO₅, and La₂Ti₂O₇ have been irradiated in situ using 1 MeV Kr²⁺ ions at the Intermediate Voltage Electron Microscope-Tandem User Facility (IVEM-Tandem), Argonne National Laboratory (ANL). We observed that La₂O₃ remained crystalline to a fluence greater than 3.1×10¹⁶ ions cm⁻² at a temperature of 50 K. The four binary oxide compounds in the two systems were observed through the crystalline-amorphous transition as a function of ion fluence and temperature. Results from the ion irradiations give critical temperatures for amorphisation (T_c) of 647 K for LaAlO₃, 840 K for La₂Ti₂O₇, 865 K for La_2/3TiO₃, and 1027 K for La₂TiO₅. The T_c values observed in this study, together with previous data for Al₂O₃ and TiO₂, are discussed with reference to the melting points for the La₂O₃-Al₂O₃ and La₂O₃-TiO₂ systems and the different local environments within the four crystal structures. Results suggest that there is an observable inverse correlation between T_c and melting temperature (T_m) in the two systems. More complex relationships exist between T_c and crystal structure, with the stoichiometric perovskite LaAlO₃ being the most resistant to amorphisation.     

BaO-Al2O3-B2O3系密封玻璃的结构与性质

The BaO-Al₂O₃-B₂O₃ glasses manufactured for solid oxide fuel cell(SOFC) sealing were studied. The effect of different n_BaO/n_B2O3 on crystal, thermal properties, density and infrared spectra of this system has been discussed. The results show that the trends of crystallization, glass transformation temperature, dilatometric softening temperature and density increase with n_BaO/n_B2O3 values. But a typical property deviation occurs when n_BaO/n_B2O3 is 0.875, and its coefficient of thermal expansion has the maximum at this point. The changes of properties can attribute to the conversion of boron from tetrahedral coordination to trigonal, breakage of the local glass network and interaction between the network modifiers. These can be proved by infrared spectra of glasses. Thermal properties of some studied samples are suitable for the sealing of SOFC using Sm doped ceria electrolyte and operating at 400～600 ℃.     

Partial oxidation of methane on Cr2O3/Al2O3

The oxidation of methane on supported chromia was studied at temperatures varying between 423 and 743 K and CH₄/O₂ ratios between 1 and 9 in a differential reactor. The main reaction products observed were carbon monoxide and formaldehyde. The rates of reaction obey a power law expression.

---

, 423 743 CH₄/O₂ 1 9, . . .

     

Chemical twinning of the pyrochlore structure in the system Bi2O3-Fe2O3-Nb2O5

New ternary bismuth iron niobates having structures based on chemical twinning of pyrochlore are described. Bi_5.67Nb₁₀FeO₃₅ has hexagonal symmetry, P6₃/mmc, , , Z=2 and Bi_9.3Nb_16.9Fe_1.1O_57.8 has rhombohedral symmetry, R-3m, , , Z=3. The structures of both phases were determined and refined to R₁=0.04 using single-crystal X-ray data. They can be described as being derived from the pyrochlore structure by chemical twinning on (111)_py oxygen planes. The chemical twin operation produces pairs of corner-connected hexagonal tungsten bronze (HTB) layers as in the HTB structure, so the structures may alternatively be described as pyrochlore:HTB unit-cell intergrowth structures. In the hexagonal phase the pyrochlore blocks have a width of 12 Å, whereas the rhombohedral phase has pyrochlore blocks of two widths, 6 and 12 Å, alternating with HTB blocks. It is proposed that the previously reported binary 4Bi₂O₃:9Nb₂O₅ phase has a related structure containing pyrochlore blocks all of width 6 Å. A feature of the structures is partial occupancy (∼65%) of the Bi sites and displacement of the Bi atoms from the ideal pyrochlore A sites towards the surrounding oxygen atoms, as observed in Bi-containing pyrochlores.     

Surface acidity of the La2O3/Al2O3 system

Surface acidity of aluminium oxide containing 5 wt. % lanthanum oxide has been determined by IR spectroscopy. Strength of Lewis sites of the La₂O₃/Al₂O₃ system was lower than that of pure aluminium oxide. However, the presence of La₂O₃ in aluminium oxide increased the thermostability of these sites in the mixed system.