SnO2纳米粒子-花生酸LB膜有序组合体的研究

采用胶体化学法制备了稳定的SnO2纳米粒子（nanoparticleNP）水溶胶，用膜天平和原位布儒斯特角显微镜（BAM）考察了经典成膜材料花生酸（AA）在此水溶胶气-液界面的成膜性，并用LB膜技术在不同基底上制得了单层和多层AA-Sno2NP复合LB膜，通过TEM、小角X-ray、IR和UV-VIS光谱，进一步考察了该有序组装体的结构和周期性，以及组装作中Sno2纳米粒子的形貌、粒度分布和表面聚集状态.结果表明，用这种方法能够制得粒度分布均匀、农致密的Sno2纳米粒子复合LB膜，并且多层复合膜具有良好的周期性.     

Self-assembly of amphiphilic hexapyridinium cations at the air/water interface and on HOPG surfaces.

Mono- and multilayers of a novel amphiphilic hexapyridinium cation with six eicosyl chains (3) are spread at the air/water interface as well as on highly ordered pyrolytic graphite (HOPG). On water, the monolayer of 3 is investigated by recording surface pressure/area and surface potential/area isotherms, and by Brewster angle microscopy (BAM). Self-organized tubular micelles with an internal edge-on orientation of molecules form at the air/water interface at low surface pressure whereas multilayers are present at high surface pressure, after a phase transition. Packing motifs suggesting a tubular arrangement of the constituting molecules were gleaned from atomic force microscopy (AFM) investigations of Langmuir-Blodgett (LB) monolayers being transferred on HOPG at different surface pressures. These LB film structures are compared to the self-assembled monolayer (SAM) of 3 formed via adsorption from a supersaturated solution, which is studied by scanning tunnelling microscopy (STM). On HOPG the SAM of 3 consists of nanorods with a highly ordered edge-on packing of the aromatic rings and an arrangement of alkyl chains which resembles the packing of molecules at the air/water interface at low surface pressure. Additional details of the molecular packing were gleaned from single-crystal X-ray structure analysis of the hexapyridinium model compound 2b, which possesses methyl instead of eicosyl residues.     

Organization and properties of a conjugated poly(heteroarylene methines) at the air-water interface and in the Langmuir-Blodgett films

A poly(heteroarylene methine) derivative, poly[(2,5-thiophenediyl) (p-n-methyl, n-octylaminobenzylidene) (2,5-thiophenequinodimethaneiyl)] (PTABQ), has been synthesized and spread at the air-water interface. The influences of three kinds of solutions on PTABQ monolayer behavior at the air-water interface have been investigated via the measurements of the pi-A isotherm and film stability. The results show that all three kinds of PTABQ solutions are apt to form the stable and transferable monolayer film organized with the plane of its pi-system nearly perpendicular to the air-water interface. Moreover, the monolayer-forming ability of PTABQ can be improved by introducing a water-soluble amphiphilie as an extractable spread-aiding component, which is further proved by the AFM images and FTIR spectra of the transferred films. UV-visible absorption spectra indicate that the well-ordered layer-by-layer structure is successfully controlled in the LB films. The optical bandgap of PTABQ is reduced for the ordered arrangement of its molecules in LB films. The intrinsic electrical conductivity of PTABQ LB films is 8.1 x 10(-8) S/cm and the conductivity of iodine-doped films is 5.7 x 10(-7) S/cm.     

Macroscopic alignment of graphene stacks by Langmuir-Blodgett deposition of amphiphilic hexabenzocoronenes

We present structural studies of Langmuir (L) and Langmuir-Blodgett (LB) films of new amphiphilic hexa-peri-hexabenzocoronene (HBC) discotics, carrying five branched alkyl side chains and one polar group. The polar group is either a carboxylic acid moiety or an electron acceptor moiety (anthraquinone). Grazing-incidence X-ray diffraction (GIXD) and X-ray reflectivity, both utilizing synchrotron radiation, show that these amphiphilic HBCs form well-defined Langmuir monolayers at the air-water interface, with a pi-stacked columnar structure where the HBC cores are rotated around the surface normal and tilted relative to the water surface. The intercolumnar distance is 20 A. The HBCs are confined to a layer lying on top of the layer of polar groups that are in contact with the water subphase. Efficient transfer of the monolayer of the anthraquinone-substituted HBC derivative to hydrophobic quartz substrates by vertical dipping gave well-defined multilayer Y-type LB films. Polarized optical spectroscopy, GIXD, and X-ray reflectivity measurements show that the LB films consist of at least two phases. Heating the films results in an irreversible rearrangement to a single macroscopically aligned phase of hexagonally packed columns oriented along the dipping direction with disk planes perpendicular to the columnar axes and stacked in a cofacial manner. This phase transition is analogous to the reversible transition observed in the bulk material.     

Covalent gluing and postgluing of Langmuir-Blodgett monolayers at hydrocarbon surfaces

Langmuir-Blodgett (LB) monolayers of 5,11,17,23,29,35-hexaformyl-37,38,39,40,41,42-hexakis(1-n-octyloxy)calix[6]arene (2), deposited onto silylated silicon wafers, were cross-linked (i.e., "covalently glued") via Schiff base formation with poly(allylamine). Direct evidence for imine formation was obtained from X-ray photoelectron spectroscopy and from attenuated total reflection IR spectroscopy. These modified surfaces could be removed from the aqueous subphase into air with retention of the assembly and its orientation relative to the surface, as evidenced by atomic force microscopy, water contact angle measurements, and film thickness determinations by ellipsometry. Similar assemblies were also synthesized via a postgluing procedure, in which the substrate containing the LB monolayer was removed from the subphase and rapidly immersed into an aqueous solution containing poly(allylamine). The potential of combining postgluing methods with continuous LB film deposition as a surface modification technique is briefly discussed.     

One-step synthesis of monodisperse silver nanoparticles beneath vitamin E Langmuir monolayers

The monodisperse silver nanoparticles were synthesized by one-step reduction of silver ions in the alkaline subphase beneath vitamin E (VE) Langmuir monolayers. The monolayers and silver nanocomposite LB films were characterized by surface pressure-area (pi-A) isotherms, transmission electron microscopy (TEM), ultraviolet-visible spectroscopy (UV-vis), selected area electron diffraction (SAED), Fourier transform infrared transmission spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS), respectively. The results showed that the limiting area/VE molecule on different subphases varied. The phenolic groups in the VE molecules were converted to a quinone structure, and the silver ions were mainly reduced to ellipsoidal and spherical nanoparticles. The arrangement of the nanoparticles changed from sparseness to compactness with reaction time. The electron diffraction pattern indicated that the silver nanoparticles were face-centered cubic (fcc) polycrystalline. Silver nanocomposite LB films with excellent quality could be formed on different substrates, indicating that the transfer ratio of monolayer containing silver nanoparticles is close to unity. The dynamic process of reduction of silver ions by VE LB films was also studied through monitoring the conductivity of an Ag2SO4 alkaline solution.     

Structures of palmitoyl-L and DL-lysine monolayers at the air-water interface--polarization modulation infrared reflection absorption spectroscopic study

Polarization modulation infrared reflection absorption spectroscopy (PM-IRAS) was applied to measure the IR spectra of palmitoyl-DL-lysine (L-PL) and palmitoyl-DL-lysine (DL-PL) at the air-water interface. The spectra in the amide I and II regions were simulated by using the extinction coefficients of the amide I and II bands of L-PL and DL-PL determined by the analyses of the IR external reflection spectra of the Langmuir-Blodget (LB) films prepared on a Ge plate (Yasukawa et al. J. Mol. Struct. 2005, 735-736, 53), indicating the angle between the plane of the secondary amide group (the amide plane) and the surface normal in the L-PL monolayer to be about 20 degrees and the angle in the DL-PL monolayer to be about 37 degrees. Comparison of the tilt angles with the corresponding angles in the LB films (about 20 degrees for the LB film of L-PL; about 49 degrees for the LB film of DL-PL) indicated that, upon being transferred to the solid substrate from the air-water interface, the L-PL monolayer keeps the orientation of the amide plane virtually unchanged, while the DL-PL monolayer changes the orientation appreciably to a horizontal direction. The orientation change of the amide plane was interpreted as due to the accommodation of irregularly oriented palmitoyl groups into the LB films of DL-PL on the solid substrate.     

Metal ion coordination with an asymmetric fan-shaped dendrimer at the air-water interface

Metal coordination to monolayers of 4-{10-[4-(3,5-bis-benzyloxy)-phenyl]-anthracen-9-yl}-benzoic acid ([G1-An]-CO(2)H, G1) and 4-(10-{4-[3,5-bis-(3,5-bis-benzyloxy)-benzyloxy]-phenyl}-anthracen-9-yl)-benzoic acid ([G2-An]-CO(2)H, G2) at the air-water interface and to Langmuir-Blodgett (LB) films was investigated using surface pressure-area isotherms, ultraviolet-visible (UV-vis) spectroscopy, atomic force microscopy (AFM), and X-ray reflectivity (XRR). Surface pressure-area isotherms show that G1 and G2 have different limiting areas according to the type of subphase. The limiting area of G1 and G2 increased more with Al(3+) than with Eu(3+) in the subphase. This result indicates that the hydrophilic core group is anchored to ions in the water via bidentate chelates with the carboxylate oxygen atoms of G1 and G2. Circular domains and aggregates were observed for the LB film. The different behavior of Eu(3+) and Al(3+) complexes is originated from the intrinsic nature of the ion, i.e., coordination number.     

Characterization of peptide-guided polymer assembly at the air/water interface

An organo-soluble, peptide-polymer conjugate that combines poly(n-butyl acrylate) with a beta-sheet-forming peptide is spread at the water surface to investigate peptide-guided self-assembly in a two-dimensional environment. Single layers of the conjugate are studied to gain information on the packing, orientation, and structure of the conjugate molecules using standard monolayer techniques: isotherms, grazing incidence X-ray diffraction (GIXD), and infrared reflection absorption spectroscopy (IRRAS). At all conditions studied, the stabilizing beta-sheet network consists of antiparallel beta-sheets oriented parallel to the air/water interface. The incorporation of temporary switch defects in the peptide segment enables beta-sheet assembly to be triggered at different packing densities. Stable monolayers, with low compressibilities similar to peptide monolayers, form when beta-sheet assembly occurs in monolayers that contain closely packed conjugate molecules. Langmuir-Schaefer transfer of the switched monolayer seeded with 1/1000 part stearic acid results in a transferred monolayer containing ordered domains with 7 nm wide stripes, a width in agreement with the end-to-end distance of the conjugate molecule. In this interfacial system, high packing densities and a hydrophobic seed molecule play an important role in beta-sheet network and structure formation. Both effects likely direct the highly ordered beta-sheet structure because of beta-strand prealignment. Insights gained from self-assembly in this system can be applied to peptide aggregation mechanisms in more complex interfacial environments.     

Polymer-surfactant layered heterostructures by electropolymerization of phenosafranine in Langmuir-Blodgett films

Langmuir-Blodgett (LB) films of the water-soluble dye phenosafranine (PS) have been prepared by its adsorption from aqueous dye solution to an arachidic acid (AA) monolayer at the air-water interface. Atomic force microscopy (AFM) images of the LB films revealed the effect of change in pH of deposition on the degree of complexation of AA with the PS dye. Well-defined circular islands and holes were observed which disappeared with the increase in pH. Polarized absorption studies indicated that the dye molecules are oriented uniaxially with their long axis titled at a constant angle to the surface normal of the LB film. Within the restricted geometry of the LB film, the PS dye was electropolymerized to form a two-dimensional film of poly(phenosafranine) sandwiched between arachidic acid layers. The film was characterized by IR spectroscopy, cyclic voltammetry, and AFM. X-ray diffraction studies reveal the presence of a layer structure in the AA-PS LB film before and after polymerization. The polymer film showed highly anisotropic electrical conductivity of ca. 10 orders of magnitude. This indicates the formation of two-dimensional polyPS layers between arachidic acid layers resulting in a layered heterostructure film having alternate conducting and insulating regions. Also, the conductivity of the polyPS prepared from LB film was found to be approximately 2.5 times higher than the conductivity of polyPS prepared by solution polymerization method.     

Molecular recognition of cytosine- and guanine-functionalized nucleolipids in the mixed monolayers at the air-water interface and Langmuir-Blodgett films

Molecular recognition of mixed nucleolipids of 1-(2-octadecyloxycarbonylethyl)cytosine and 7-(2-octadecyloxycarbonylethyl)guanine in the monolayers at the air-water interface and Langmuir-Blodgett (LB) films has been investigated in detail using surface pressure/potential-area isotherms, infrared reflection-absorption spectroscopy (IRRAS), and Fourier transform infrared (FTIR) transmission spectroscopy, respectively. Prior to molecular recognition, the cytosine moieties in the monolayer were hydrogen bonded with an almost flat-on orientation, the alkyl chains were uniaxially oriented with respect to the film normal, the guanine moieties in the monolayer were stacked probably through pi-pi interaction with an end-on orientation, and the C-C-C planes of the alkyl chains were preferentially oriented parallel to the water surface. In the monolayer of equimolar mixture, molecular recognition between the cytosine and guanine moieties occurred together with the ring planes of base pairing and the C-C-C planes of the alkyl chains favorably oriented parallel to the water surface. The guanine moieties underwent an orientation change from an end-on mode before molecular recognition to a flat-on one after molecular recognition. The base pairing between the cytosine and guanine moieties in the monolayers was achieved since the N7-substituted guanine derivatives suppressed the formation of guanine tetramers. Both the IRRAS spectra of the monolayers and the FTIR spectra of the LB films presented the exact sites in the cytosine and guanine moieties for the formation of triple hydrogen bonds. The base pairing resulted in a change in molecular orientation and interaction, and the corresponding LB film exhibited a different phase transition behavior from a typical crystal transition for the cytosine-functionalized nucleolipids and an analogous glass transition for the guanine-functionalized nucleolipids. The thermal stability of the mixed LB film was improved in comparison to the LB films of pure components.     

Photoinduced high-quality ultrathin SiO2 film from hybrid nanosheet at room temperature

The paper describes a flexible approach to building up high-quality ultrathin SiO2 films under deep UV light irradiation at room temperature. The ultrathin hybrid nanosheet possessing polyoctahedral silsesquioxane (POSS) has been designed to prepare densely packed ultrathin POSS films by the Langmuir-Blodgett (LB) technique. The LB technique enables POSS to have a multilayered structure with nanoscale precision. The films' hardness and modulus changed considerably from 0.1 and 2.6 GPa to 1.7 and 32.2 GPa, respectively, after deep UV light irradiation. Subsequent FTIR measurements revealed that the organic components were removed completely and that the POSS cage structure turned to an Si-O-Si network structure. X-ray photon spectroscopy also confirmed high-quality SiO2 formation with no suboxides.     

Discogen-DNA complex films at air-water and air-solid interfaces

We have studied films of an ionic discogenic (discotic mesogenic) molecule (pyridinium salt tethered with hexaalkoxytriphenylene (PyTp)) and DNA complex at air-water (A-W) and air-solid interfaces. We have formed an PyTp monolayer on an aqueous subphase containing a small amount of DNA to obtain a PyTp-DNA complex at the A-W interface. Compared to the pure PyTp monolayer, the PyTp-DNA complex monolayer exhibits a higher collapse pressure and lower limiting area, indicating condensation and better stability. A Brewster angle microscope was used for in situ observation of the morphology of the film at the A-W interface. The PyTp-DNA complex films on silicon wafers were prepared using the Langmuir-Blodgett (LB) technique. We find that several tens of layers of the PyTp-DNA complex monolayer can be transferred with good efficiency. Fourier transform infrared spectroscopy studies confirm the presence of DNA in the LB films of the PyTp-DNA complex. Nanoindentation measurements using atomic force microscope reveal that the PyTp-DNA complex films are about two times harder as compared to the pure PyTp films.     

Langmuir-Blodgett-Kuhn and self-assembled films of asymmetrically substituted poly(paraphenylene)

Asymmetrically substituted poly(paraphenylene) (PhPPP) with hydrophilic and hydrophobic side chains was investigated. The polymer behavior at the air-water interface was studied on the basis of surface pressure-area (pi-A) isotherms and compression/expansion hysteresis measurements. PhPPP can form stable monolayers with an area per repeat unit of A=0.20+/-0.02 nm2 and a collapse pressure in the range of pi=25 mN/m. Then, Langmuir-Blodgett-Kuhn (LBK) films of PhPPP were prepared by horizontally and vertically transferring the Langmuir monolayers onto hydrophilic solid substrates at pi=12 mN/m. Cross-section analysis of the AFM tapping-mode topography images of a single transferred monolayer reveals a thickness of d0=0.9+/-0.1 nm. Taking into account the obtained monolayer thickness, curve-fitting calculations of angular scan data of LB monolayers measured using surface plasmon resonance (SPR) spectroscopy lead to a value for the refractive index of n=1.78+/-0.02 at lambda=632.8 nm. Next, the spontaneous formation of a PhPPP monolayer by adsorption from solution was studied ex situ by atomic force microscopy and UV-vis spectroscopy and in situ by using SPR spectroscopy. Stable self-assembled monolayers of PhPPP can be formed on hydrophilic surfaces with a thickness similar to that of the monolayer obtained using the LB method. The characterization results confirmed the amphiphilic character and the self-assembly properties of PhPPP, as well as the possibility of preparing homogeneous monolayer and multilayer films.     

Oriented crystalline monolayers and bilayers of 2 x 2 silver(I) grid architectures at the air-solution interface: their assembly and crystal structure elucidation

Oriented crystalline monolayers, approximately 14 A thick, of a 2 x 2 Ag+ grid complex, self-assembled at the air-solution interface starting from an water-insoluble ligand 3,6-bis[2-(6-phenylpyridine)]pyridazine spread on silver-ion-containing solutions, were examined by grazing-incidence X-ray diffraction and specular X-ray reflectivity using synchrotron radiation. The monolayer structure was refined, including a determination of the positions of the counter-ions, with the SHELX-97 computer program. The monolayers were transferred from the interface onto various solid supports and visualized by scanning force microscopy, and characterized by X-ray photoelectron spectroscopy in terms of molecular structure. On surface compression, the initial self-assembled monolayer undergoes a transition to a crystalline bilayer in which the two layers, almost retaining the original arrangement, are in registry. Such a phase transition is of relevance to the understanding of crystal nucleation.     

Thermodynamic characteristics and Langmuir-Blodgett deposition behavior of mixed DPPA/DPPC monolayers at air/liquid interfaces

The role of dipalmitoylphosphatic acid (DPPA) as a transfer promoter to enhance the Langmuir-Blodgett (LB) deposition of a dipalmitoylphosphatidylcholine (DPPC) monolayer at air/liquid interfaces was investigated, and the effects of Ca2+ ions in the subphase were discussed. The miscibility of the two components at air/liquid interfaces was evaluated by surface pressure-area per molecule isotherms, thermodynamic analysis, and by the direct observation of Brewster angle microscopy (BAM). Multilayer LB deposition behavior of the mixed DPPA/DPPC monolayers was then studied by transferring the monolayers onto hydrophilic glass plates at a surface pressure of 30 mN/m. The results showed that the two components, DPPA and DPPC, were miscible in a monolayer on both subphases of pure water and 0.2 mM CaCl2 solution. However, an exception occurs between X(DPPA)=0.2 and 0.5 at air/CaCl2-solution interface, where a partially miscible monolayer with phase separation may occur. Negative deviations in the excess area analysis were found for the mixed monolayer system, indicating the existence of attractive interactions between DPPA and DPPC molecules in the monolayers. The monolayers were stable at the surface pressure of 30 mN/m for the following LB deposition as evaluated from the area relaxation behavior. It was found that the presence of Ca2+ ions had a stabilization effect for DPPA-rich monolayers, probably due to the association of negatively charged DPPA molecules with Ca2+ ions. Moreover, the Ca2+ ions may enhance the adhesion of DPPA polar groups to a glass surface and the interactions between DPPA polar groups in the multilayer LB film structure. As a result, Y-type multilayer LB films containing DPPC could be fabricated from the mixed DPPA/DPPC monolayers with the presence of Ca2+ ions.     

Synthesis and characterization of monolayers and Langmuir-Blodgett films of an amphiphilic oligo(ethylene glycol)-C60-hexadecaaniline conjugate

A novel amphiphilic oligo(ethylene glycol)-C60-hexadecaaniline (A16) tricomponent conjugate, C60>(A16-EG43), possessing a well-defined number of repeating aniline donor units and a hydrophilic ethylene glycol oligomer chain was synthesized. The compound is composed of a covalently bound donor-acceptor chromophore structure. Molecular self-assembly of C60>(A16-EG43) at the air-water interface formed a densely packed Langmuir monolayer with all highly hydrophobic fullerene cages located above the liquid interface. The monolayer can then be transferred onto a glass substrate via Langmuir-Blodgett (LB) deposition. LB multilayered thin films formed by multiple deposition of the monolayer yielded broadened optical absorption peaks extending beyond 600 nm into the 950 nm region, suggesting strong intermolecular interactions among the C60 cages and the A16 moieties. An X-ray reflectometry study clearly reveals that the Langmuir film at the air-water interface consists of a C60 top layer and a bottom layer containing hexcadecaaniline and oligo(ethylene glycol) with gradually decreasing electron density over a distance of approximately 130 A above bulk water. The pressure isotherm shows that the packing density of the C60>(A16-EG43) monolayer, corresponding to a molecular area of approximately 95 A2/molecule, is similar to that of the surface area of the C60 monolayer. This result suggests that C60 packing plays a dominant role in guiding the formation of the monolayer structure. Further photoexcitation of hexadecaaniline moieties of aligned (C60>)-A16 layers by a flash light source induces cross linking between adjacent A16 segments forming an interlinked A16 array. Our results have demonstrated a unique fabrication method for preparing the aligned donor-acceptor array using strong intermolecular interactions between fullerenes as the molecular orientation guiding force in the Langmuir-Blodgett technique.     

Self-organized monolayer of meso-tetradodecylporphyrin coordinated to Au(111)

The structure of molecular monolayers formed at the interface between atomically flat surfaces and a solution of free-base meso-tetradodecylporphyrins (H2Ps) was examined by scanning tunneling microscopy (STM) at the liquid/solid interface. On the surface of graphite (HOPG), H2Ps form a well-ordered monolayer characterized by an oblique unit cell. On Au(111), H2Ps form a self-organized monolayer comprised of two distinct domain types. In both types of domains, the density of the porphyrin cores is increased in comparison to the arrangement observed on HOPG. Also, high-resolution STM images reveal that, in contrast to what is observed on HOPG, physisorption on Au(111) induces a distortion of the porphyrin macrocycle out of planarity. By using X-ray photoelectron spectroscopy, we demonstrate that this is likely to be due to the coordination of the lone pairs of the iminic (-C=N-) nitrogen atoms of the porphyrin macrocycle to Au(111).     

聚乙烯咔唑/杂多阴离子杂化LB膜的制备、结构与光电性质

首次选用聚乙烯咔唑（PVK）、二十二烷酸（BA）与杂多阴离子用LB技术制备 了五种有机/无机杂化LB膜，PVK/BA/HPC（HPC = Na_5(PZ(H_2O)Mo_(11)O_(39)]· 5H_2O, Z = Mn, Co, Cu, Zn, Ni）。用原子力显微镜（AFM），UV-vis，小角X射 线衍射（LAXRD），表面光电压谱（SPS），荧光光谱等对LB膜的结构与性质进行了 表征。结果表明：它们在空气/水界面有好的成膜性能，崩溃压为22 ～27 mN/m， 杂多阴离子作为一个单层夹在PVK和BA双层之间。PVK/BA/HPC LB膜的光致发光具有 PVK激基缔合物的特征荧光，其光电压谱有较强的光电响应。     

Langmuir-Blodgett films of octadecanethiol--properties and potential applications

Octadecanethiol (ODT) is known to form self-assembled monolayer on noble metal surfaces which has potential technological applications. Langmuir-Blodgett (LB) technique is another useful method of obtaining highly ordered assembly of molecules. It is of interest to find whether ODT molecules can also form a stable Langmuir monolayer which facilitates the preparation of LB films. In literature, it has been reported that ODT molecules form an unstable Langmuir monolayer. We have studied the stability of the monolayer of the ODT molecules at air-water interface using surface manometry and microscopy techniques. We find the monolayer to be stable on ultrapure water of resistivity greater than 18MOmega cm. However, the behavior changes in the presence of even small amount of additives like NaOH or CdCl2 in the subphase. Our AFM studies on the LB films of ODT deposited from ion-free ultrapure water showed streak-like bilayer domains. The LB films of ODT deposited from CdCl2 containing aqueous subphase yield dendritic domains of the complexed unit grown over ODT monolayer. These nanostructures on surfaces may have potential applications in molecular electronics.