Controlled rate thermal analysis of hydromagnesite

The reaction of magnesium minerals such as brucite with CO₂ is important in the sequestration of CO₂. The study of the thermal stability of hydromagnesite and diagenetically related compounds is of fundamental importance to this sequestration. The understanding of the thermal stability of magnesium carbonates and the relative metastability of hydrous carbonates including hydromagnesite, artinite, nesquehonite, barringtonite and lansfordite is extremely important to the sequestration process for the removal of atmospheric CO₂. This work makes a comparison of the dynamic and controlled rate thermal analysis of hydromagnesite and nesquehonite. The dynamic thermal analysis of synthetic hydromagnesite proves that dehydration takes place in two steps at 135 and 184°C, dehydroxylation at 412°C and decarbonation at 474°C. Controlled rate thermal analysis shows the first dehydration step is isothermal and the second quasi-isothermal at 108 and 145°C, respectively. In the CRTA experiment both water and carbon dioxide are evolved in an isothermal decomposition at 376°C. CRTA technology offers better resolution and a more detailed interpretation of the decomposition processes of magnesium carbonates such as nesquehonite via approaching equilibrium conditions of decomposition through the elimination of the slow transfer of heat to the sample as a controlling parameter on the process of decomposition. Constant-rate decomposition processes of non-isothermal nature reveal partial nesquehonite structure.     

Thermal analysis of smithsonite and hydrozincite

Thermogravimetric analysis of synthetic smithsonite and hydrozincite, two secondary minerals of zinc, was used to determine their relative thermal stability. Thermal decomposition of smithsonite occurs at 293°C and hydrozincite at 220°C showing that the carbonate mineral is more stable than the hydroxy-carbonate mineral hydrozincite. Hot stage Raman spectroscopy confirms the decomposition of smithsonite and hydrozincite by 300 and 250°C, respectively. Thermogravimetry shows that a small amount of hydrozincite is formed during the synthesis of smithsonite. No evidence is found for the separate loss of the carbonate and hydroxyl units from hydrozincite.     

Conventional and controlled rate thermal analysis of nesquehonite Mg(HCO<Subscript>3</Subscript>)(OH)·2(H<Subscript>2</Subscript>O)

The understanding of the thermal stability of magnesium carbonates and the relative metastability of hydrous carbonates including hydromagnesite, artinite, nesquehonite, barringtonite and lansfordite is extremely important to the sequestration process for the removal of atmospheric CO₂. The conventional thermal analysis of synthetic nesquehonite proves that dehydration takes place in two steps at 157, 179°C and decarbonation at 416 and 487°C. Controlled rate thermal analysis shows the first dehydration step is isothermal and the second quasi-isothermal at 108 and 145°C. In the CRTA experiment carbon dioxide is evolved at 376°C. CRTA technology offers better resolution and a more detailed interpretation of the decomposition processes of magnesium carbonates such as nesquehonite via approaching equilibrium conditions of decomposition through the elimination of the slow transfer of heat to the sample as a controlling parameter on the process of decomposition. Constant-rate decomposition processes of non-isothermal nature reveal partial collapse of the nesquehonite structure.     

Thermal decomposition of natural iowaite

The thermal decomposition of natural iowaite of formula Mg₆Fe₂(Cl,(CO₃)_0.5)(OH)₁₆·4H₂O was studied by using a combination of thermogravimetry and evolved gas mass spectrometry. Thermal decomposition occurs over a number of mass loss steps at 60°C attributed to dehydration, 266 and 308°C assigned to dehydroxylation of ferric ions, at 551°C attributed to decarbonation and dehydroxylation, and 644, 703 and 761°C attributed to further dehydroxylation. The mass spectrum of carbon dioxide exhibits a maximum at 523°C. The use of TG coupled to MS shows the complexity of the thermal decomposition of iowaite. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermal decomposition of the hydrotalcite

Summary A combination of thermogravimetry and hot stage Raman spectroscopy has been used to study the thermal decomposition of the synthesised zinc substituted takovite Zn₆Al₂CO₃(OH)₁₆·4H₂O. Thermogravimetry reveals seven mass loss steps at 52, 135, 174, 237, 265, 590 and ~780°C. MS shows that the first two mass loss steps are due to dehydration, the next two to dehydroxylation and the mass loss step at 265°C to combined dehydroxylation and decarbonation. The two higher mass loss steps are attributed to decarbonation. Raman spectra of the hydroxyl stretching region over the 25 to 200°C temperature range, enable identification of bands attributed to water stretching vibrations, MOH stretching modes and strongly hydrogen bonded CO₃^2--water bands. CO₃^2- symmetric stretching modes are observed at 1077 and 1060 cm^-1. One possible model is that the band at 1077 cm^-1is ascribed to the CO₃^2- units bonded to one OH unit and the band at 1092 cm^-1is due to the CO₃^2- units bonded to two OH units from the Zn-takovite surface. Thermogravimetric analysis when combined with hot stage Raman spectroscopy forms a very powerful technique for the study of the thermal decomposition of minerals such as hydrotalcites.</o:p>     

Thermal decomposition of the layered double hydroxides of formula Cu6Al2(OH)16CO3 and Zn6Al2(OH)16CO3

Zn-Al hydrotalcites and Cu-Al hydrotalcites were synthesised by coprecipitation method and analysed by X-ray diffraction (XRD) and thermal analysis coupled with mass spectroscopy. These methods provide a measure of the thermal stability of the hydrotalcite. The XRD patterns demonstrate similar patterns to that of the reference patterns but present impurities attributed to Zn(OH)₂ and Cu(OH)₂. The analysis shows that the d003 peak for the Zn-Al hydrotalcite gives a spacing in the interlayer of 7.59 ? and the estimation of the particle size by using the Debye-Scherrer equation and the width of the d003 peak is 590 ?. In the case of the Cu-Al hydrotalcite, the d003 spacing is 7.57 ? and the size of the diffracting particles was determined to be 225 ?. The thermal decomposition steps can be broken down into 4 sections for both of these hydrotalcites. The first step decomposition below 100°C is caused by the dehydration of some water absorbed. The second stage shows two major steps attributed to the dehydroxylation of the hydrotalcite. In the next stage, the gas CO₂ is liberated over a temperature range of 150°C. The last reactions occur over 400°C and involved CO₂ evolution in the decomposition of the compounds produced during the dehydroxylation of the hydrotalcite.     

Simultaneous use of isothermal,nonisothermal, and constant rate thermal analysis (CRTA) for discerning the kinetics of the thermal dissociation of smithsonite

The mechanism of the thermal decomposition of smithsonite has been determined from a comparison of the results obtained from isothermal, linear heating rate (TG), and Constant Rate Thermal Analysis (CRTA) experiments. Two important precautions have been taken in this work. Firstly, the chemical composition of the sample has been checked in order to be sure that pure anhydrous zinc carbonate has been used. Secondly, the experimental conditions have been selected in such a way to avoid the influence of heat and mass transfer phenomena on the forward reaction. It has been shown that the mechanism for the thermal decomposition of smithsonite depends upon temperature. Thus, at temperatures lower than 650 K, approximately, an A_0.5 kinetic model describes the reaction, whereas, at temperatures roughly higher than 690 K the above reaction obeys a F₁ kinetic law. An interpretation of this behavior is given. © 1998 John Wiley & Sons, Inc. Int J Chem Kinet: 30: 647–655, 1998     

Thermal analysis of beaverite in comparisonwith plumbojarosite

The thermal decomposition of beaverite and plumbojarosite was studied using a combination of thermogravimetric analysis coupled to a mass spectrometer. The mineral beaverite Pb(Fe,Cu)₃(SO₄)₂(OH)₆ decomposes in three stages attributed to dehydroxylation, loss of sulphate and loss of oxygen, which take place at 376 and 420, 539 and 844°C. In comparison three thermal decomposition steps are observed for plumbojarosite PbFe₆(SO₄)₄(OH)₁₂ at 376, 420 and 502°C attributed to dehydroxylation; loss of sulphate occurs at 599°C; and loss of oxygen and formation of lead occurs at 844 and 953°C. The temperatures of the thermal decomposition of the natural plumbojarosite were found to be less than that for the synthetic jarosite. A comparison of the thermal decomposition of plumbojarosite with argentojarosite is made. The understanding of the chemistry of the thermal decomposition of minerals such as beaverite, argentojarosite and plumbojarosite and related minerals is of vital importance in the study known as ‘archeochemistry’.     

Thermal decomposition of the composite hydrotalcites of iowaite and woodallite

The thermal stability and thermal decomposition pathways for synthesized composite iowaite/woodallite have been determined using thermogravimetry analysis in conjunction with evolved gas mass spectrometry. Dehydration of the hydrotalcites occurred over a range of 56–70°C. The first dehydroxylation step occurred at around 255°C and, with the substitution of more iron(III) for chromium(III) this temperature increased to an upper limit of 312°C. This trend was observed throughout all decomposition steps. The release of carbonate ions as carbon dioxide gas initialised at just above 300°C and was always accompanied by loss of hydroxyl units as water molecules. The initial loss of the anion in this case the chloride ion was consistently observed to occur at about 450°C with final traces evolved at 535 to 780°C depending of the Fe:Cr ratio and was detected as HCl (m/z=36). Thus for this to occur, hydroxyl units must have been retained in the structure at temperatures upwards of 750°C. Experimentally it was found difficult to keep CO₂ from reacting with the compounds and in this way the synthesized iowaite-woodallite series somewhat resembled the natural minerals.     

TG–MS–FTIR (evolved gas analysis) of kaolinite–urea intercalation complex

The products evolved during the thermal decomposition of kaolinite–urea intercalation complex were studied by using TG–FTIR–MS technique. The main gases and volatile products released during the thermal decomposition of kaolinite–urea intercalation complex are ammonia (NH₃), water (H₂O), cyanic acid (HNCO), carbon dioxide (CO₂), nitric acid (HNO₃), and biuret ((H₂NCO)₂NH). The results showed that the evolved products obtained were mainly divided into two processes: (1) the main evolved products CO₂, H₂O, NH₃, HNCO are mainly released at the temperature between 200 and 450 °C with a maximum at 355 °C; (2) up to 600 °C, the main evolved products are H₂O and CO₂ with a maximum at 575 °C. It is concluded that the thermal decomposition of the kaolinite–urea intercalation complex includes two stages: (a) thermal decomposition of urea in the intercalation complex takes place in four steps up to 450 °C; (b) the dehydroxylation of kaolinite and thermal decomposition of residual urea occurs between 500 and 600 °C with a maximum at 575 °C. The mass spectrometric analysis results are in good agreement with the infrared spectroscopic analysis of the evolved gases. These results give the evidence on the thermal decomposition products and make all explanation have the sufficient evidence. Therefore, TG–MS–IR is a powerful tool for the investigation of gas evolution from the thermal decomposition of materials and its intercalation complexes.     

Thermal decomposition of hydrotalcite with hexacyanoferrate(II) and hexacyanoferrate(III) anions in the interlayer

The mechanism for the decomposition of hydrotalcite remains unsolved. Controlled rate thermal analysis enables this decomposition pathway to be explored. The thermal decomposition of hydrotalcites with hexacyanoferrate(II) and hexacyanoferrate(III) in the interlayer has been studied using controlled rate thermal analysis technology. X-ray diffraction shows the hydrotalcites have a d(003) spacing of 10.9 and 11.1 Å which compares with a d-spacing of 7.9 and 7.98 Å for the hydrotalcite with carbonate or sulphate in the interlayer. Calculations show dehydration with a total loss of 7 moles of water proving the formula of hexacyanoferrate(II) intercalated hydrotalcite is Mg₆Al₂(OH)₁₆[Fe(CN)₆]_0.5·7H₂O and 9.0 moles for the hexacyanoferrate(III) intercalated hydrotalcite with the formula of Mg₆Al₂(OH)₁₆[Fe(CN)₆]_0.66·9H₂O. CRTA technology indicates the partial collapse of the dehydrated mineral. Dehydroxylation combined with CN unit loss occurs in two isothermal stages at 377 and 390°C for the hexacyanoferrate(III) and in a single isothermal process at 374°C for the hexacyanoferrate(III) hydrotalcite.     

Thermal decomposition of jarosites of potassium,sodium and lead

Summary Jarosites are a group of minerals formed in evaporite deposits and form a component of efflorescence. As such the minerals can function as cation and heavy metal collectors. Thermogravimetry coupled to mass spectrometry has been used to study three Australian jarosites which are predominantly K, Na and Pb jarosites. Mass loss steps of K-jarosite occur over the 130 to 330 and 500 to 622°C temperature range and are attributed to dehydroxylation and desulphation. In contrast the behaviour of the thermal decomposition of Na-jarosite shows three mass loss steps at 215 to 230, 316 to 352 and 555 to 595°C. The first mass loss step for Na-jarosite is attributed to deprotonation. For Pb-jarosite two mass loss steps associated with dehydroxylation are observed at 390 and 418°C and a third mass loss step at 531°C is attributed to the loss of SO₃. Thermal analysis is an excellent technique for the study of jarosites. The analysis depends heavily on the actual composition of the jarosite.     

CO oxidation with oxygen of the catalyst and gas-phase oxygen over (0.5−15)%СоО/СеО<Subscript>2</Subscript>

The CO adsorption species on Co₃O₄ and (0.5-15%)CoO/CeO₂ catalysts have been investigated by temperature-programmed desorption and IR spectroscopy. At 20°C, the largest amount of CO is adsorbed on the 5%CoO/CeO₂ sample to form, on Co_m²⁺O_n²⁺ clusters, hydrogen-containing, bidentate, and monodentate carbonate complexes, whose decomposition is accompanied by CO₂ desorption at 300 and 450°C (1.1 × 10²⁰ g^–1). The formation of the carbonates is accompanied by the formation of Co⁺ cations and Co⁰, on which carbonyls form. The latter decompose at 20, 90, and 170°C to release CO (2.7 × 10¹⁹ g^–1). Part of the carbonyls oxidizes to CO₂ upon oxygen adsorption, and the CO₂ undergoes desorption at 20°C. Adsorbed oxygen decreases the decomposition temperature of the H-containing and bidentate carbonates from 300 to 100-170°C and maintains the sample in the oxidized state, which is active in subsequent CO adsorption and oxidation. CO oxidation by oxygen of the catalyst diminishes the activity of the sample in these processes and increases the decomposition temperature of the carbonate complexes. Taking into account the properties of the adsorption complexes, we concluded that the H-containing and bidentate carbonates are involved in CO oxidation by oxygen of the catalyst at ~170°C under isothermal conditions. The rate limiting step is the decomposition of the carbonates, a process whose activation energy is 65-74 kJ/mol.     

Kinetic parameters of unsaturated polyester resin modified with poly(ε -caprolactone)

The mineral sabugalite (HAl)_0.5[(UO₂)₂(PO₄)]₂⋅8H₂O, has been studied using a combination of energy dispersive X-ray analysis, X-ray diffraction, dynamic and controlled rate thermal analysis techniques. X-ray diffraction shows that the starting material in the thermal decomposition is sabugalite and the product of the thermal treatment is a mixture of aluminium and uranyl phosphates. Four mass loss steps are observed for the dehydration of sabugalite at 48°C (temperature range 39 to 59°C), 84°C (temperature range 59 to 109°C), 127°C (temperature range 109 to 165°C) and around 270°C (temperature range 175 to 525°C) with mass losses of 2.8, 6.5, 2.3 and 4.4%, respectively, making a total mass loss of water of 16.0%. In the CRTA experiment mass loss stages were found at 60, 97, 140 and 270°C which correspond to four dehydration steps involving the loss of 2, 6, 6 and 2 moles of water. These mass losses result in the formation of four phases namely meta(I)sabugalite, meta(II)sabugalite, meta(III)sabugalite and finally uranyl phosphate and alumina phosphates. The use of a combination of dynamic and controlled rate thermal analysis techniques enabled a definitive study of the thermal decomposition of sabugalite. While the temperature ranges and the mass losses vary due to the different experimental conditions, the results of the CRTA analysis should be considered as standard data due to the quasi-equilibrium nature of the thermal decomposition process. The online version of the original article can be found at     

Synthesis and vibrational spectroscopic characterisation of synthetic hydrozincite and smithsonite

Hydrozincite and smithsonite were synthesised by controlling the partial pressure of CO₂. Previous crystallographic studies concluded that the structure of hydrozincite was a simple one. However both Raman and infrared spectroscopy show that this conclusion is questionable. Multiple bands are observed in both the Raman and infrared spectra in the (CO₃)²⁻ antisymmetric stretching and bending regions of hydrozincite showing that the symmetry of the carbonate anion is reduced and in all probability the carbonate anions are not equivalent in the hydrozincite structure. Multiple OH stretching vibrations centred in both the Raman and infrared spectra show that the OH units in the hydrozincite structure are non-equivalent. The Raman spectrum of synthetic smithsonite is a simple spectrum characteristic of carbonate with Raman bands observed at 1408, 1092 and 730 cm⁻¹.     

Thermal stability of crandallite CaAl<Subscript>3</Subscript>(PO<Subscript>4</Subscript>)<Subscript>2</Subscript>(OH)<Subscript>5</Subscript>·(H<Subscript>2</Subscript>O)

Thermogravimetry combined with evolved gas mass spectrometry has been used to characterise the mineral crandallite CaAl₃(PO₄)₂(OH)₅·(H₂O) and to ascertain the thermal stability of this ‘cave’ mineral. X-ray diffraction proves the presence of the mineral and identifies the products of the thermal decomposition. The mineral crandallite is formed through the reaction of calcite with bat guano. Thermal analysis shows that the mineral starts to decompose through dehydration at low temperatures at around 139 °C and the dehydroxylation occurs over the temperature range 200–700 °C with loss of the OH units. The critical temperature for OH loss is around 416 °C and above this temperature the mineral structure is altered. Some minor loss of carbonate impurity occurs at 788 °C. This study shows the mineral is unstable above 139 °C. This temperature is well above the temperature in the caves of 15 °C maximum. A chemical reaction for the synthesis of crandallite is offered and the mechanism for the thermal decomposition is given.     

Thermoanalytical studies of silver and lead jarosites and their solid solutions

Dynamic and controlled rate thermal analysis has been used to characterise synthesised jarosites of formula [M(Fe)₃(SO₄)₂(OH)₆] where M is Pb, Ag or Pb–Ag mixtures. Thermal decomposition occurs in a series of steps. (a) dehydration, (b) well defined dehydroxylation and (c) desulphation. CRTA offers a better resolution and a more detailed interpretation of water formation processes via approaching equilibrium conditions of decomposition through the elimination of the slow transfer of heat to the sample as a controlling parameter on the process of decomposition. Constant-rate decomposition processes of water formation reveal the subtle nature of dehydration and dehydroxylation. CRTA offers a better resolution and a more detailed interpretation of the decomposition processes via approaching equilibrium conditions of decomposition through the elimination of the slow transfer of heat to the sample as a controlling parameter on the process of decomposition. Constant-rate decomposition processes of non-isothermal nature reveal separation of the dehydroxylation steps, since in these cases a higher energy (higher temperature) is needed to drive out gaseous decomposition products through a decreasing space at a constant, pre-set rate.     

Effect of the thermal treatment conditions on the formation of zinc ferrite nanocomposite, ZnFe2O4, by sol–gel method

Zinc ferrite nanocomposite was synthesized via thermal decomposition of zinc acetate and iron nitrate at three different temperatures (350, 450, and 550 °C). The influence of the thermal decomposition of precursors on the formation zinc ferrites was studied by differential thermal gravimetry and thermogravimetry (TG). The TG curve shows two steps for the thermal decomposition with mass loss of 17.3 % at 78 °C and 63.3 % at 315 °C. The prepared zinc ferrites nanocomposite was characterized by X-ray diffraction and scanning electron microscopy. The X-ray diffractograms of ZnFe₂O₄ shows that a crystalline phase, spinel system is formed. SEM micrograph of the zinc ferrite nanocomposite indicates the formation of uniformly spherical 48-nm nanograins. The properties of the zinc ferrite phase were strongly dependent on their calcinations temperature and molar ratio of precursors.     

Controlled rate thermal analysis of sepiolite

CRTA technology offers better resolution and a more detailed interpretation of the decomposition processes of a clay mineral such as sepiolite via approaching equilibrium conditions of decomposition through the elimination of the slow transfer of heat to the sample as a controlling parameter on the process of decomposition. Constant-rate decomposition processes of non-isothermal nature reveal changes in the sepiolite as the sepiolite is converted to an anhydride. In the dynamic experiment two dehydration steps are observed over the ~20–170 and 170–350 °C temperature range. In the dynamic experiment three dehydroxylation steps are observed over the temperature ranges 201–337, 337–638 and 638–982 °C. The CRTA technology enables the separation of the thermal decomposition steps.     

Controlled rate thermal analysis of sepiolite

Controlled rate thermal analysis (CRTA) technology offers better resolution and a more detailed interpretation of the decomposition processes of a clay mineral such as sepiolite via approaching equilibrium conditions of decomposition through the elimination of the slow transfer of heat to the sample as a controlling parameter on the process of decomposition. Constant-rate decomposition processes of non-isothermal nature reveal changes in the sepiolite as the sepiolite is converted to an anhydride. In the dynamic experiment two dehydration steps are observed over the ~20–170 and 170–350 °C temperature range. In the dynamic experiment three dehydroxylation steps are observed over the temperature ranges 201–337, 337–638 and 638–982 °C. The CRTA technology enables the separation of the thermal decomposition steps.