反相高效液相三元流动相台阶梯度分离条件的快速优化方法

 根据溶质在柱内的迁移规律 ,建立了一种利用线性梯度实验快速获得溶质保留值方程系数 ,然后以串行响应函数为优化指标进行多台阶梯度分离条件优化的方法。与利用等度实验获得保留值方程的方法相比 ,该法可以大大缩短优化时间。通过该方法对芳香胺和衍生化氨基酸样品进行了分离 ,获得了满意的分离度 ,表明该方法的预测精度很好。     

Liquid chromatographic analysis of nucleosides and their mono-, di- and triphosphates using porous graphitic carbon stationary phase coupled with electrospray mass spectrometry

Analysis of nucleosides and nucleotides is desirable in many biological studies, but the task is analytically challenging due to the high polarity of the analytes. In this study, resolution of mixtures containing nucleosides and their mono-, di- and triphosphates was achieved using a porous graphitic carbon (PGC) stationary phase, Hypercarb, under conditions suitable for liquid chromatography/mass spectrometry (LC/MS). Different organic mobile phases and modifiers were evaluated and the separation of 16 nucleosides and nucleotides was optimized using gradient elution with a water/acetonitrile mobile phase containing ammonium acetate and diethylamine as modifiers. The ammonium acetate concentration proved to be critical for retention and diethylamine was found to improve the peak shapes of di- and triphosphates for mass spectrometric detection. A variety of silica-based columns designed for polar compound separation were also tested using optimized LC conditions and compared with results obtained with the Hypercarb column. Only the Hypercarb column provided separations suitable for accurate quantitation of mixed nucleosides and their phosphates.     

可调移动重叠分离图法用于高效液相色谱多台阶梯度分离条件优化的研究

计算机辅助高效液相色谱（HPLC）分离条件优化可以低成本、快速地得到优化的分离条,因而已较为广泛地用于复杂样品的分离分析。基于移动重叠分离图方法,又发展了一种新型的多台阶梯度分离条件的优化方法可调移动重叠分离图法。该方法通过预测不同流动相条件下各组分的保留时间、峰宽和分离度,绘制出对于样品中各组分的重叠分离区域图。在对当前台阶流动相组成进行优化的同时,考虑其对后面一到两个台阶上流出组分保留的影响,实时地重新绘制对于后面台阶上流出组分的重叠分离区域图。通过观察当前台阶流动相条件对当前台阶和后面台阶上流出组分分离的影响,综合考虑样品中所有组分的分离情况,找到更接近全局最优的分离条件。通过扫描的方法对优化得到的分离条件进行微调,能够进一步提高分离效果。采用文献数据对可调移动重叠分离图法的应用加以说明,在二元流动相体系下,证明了该方法在HPLC方法建立方面的优越性。     

High-performance liquid chromatographic enantioseparation of amino compounds on newly developed cyclofructan-based chiral stationary phases

Direct separation of the enantiomers of amino acid amines, amino alcohols, and diamines was performed on recently developed chiral stationary phases containing isopropyl carbamate-cyclofructan 6 (IP-CF6), (R)-naphthylethylcarbamate cyclofructan 6 (RN-CF6), or dimethylphenylcarbamate cyclofructan 7 (DMP-CF7) as chiral selectors, using n-hexane/alcohol/TFA as mobile phase. The effects of the mobile phase composition, the nature and concentrations of the alcoholic and acidic modifiers, and the structures of the analytes on the retention and resolution were investigated. In some cases, separations were carried out at constant mobile phase composition in the temperature range 5-40 °C. Thermodynamic parameters and T(iso) values were calculated from plots of lnk versus 1/T. It was found that the enantioseparations were enthalpy driven. The sequences of elution of the stereoisomers were determined but no general rule could be established.     

Chromatographic behaviour of low molar-mass polyesters in normal-phase high-performance liquid chromatography

Summary The normal-phase chromatographic retention behaviour of polyesters on bare silica and on a polymer-based polyamine (PA) column has been studied with a variely of binary mobile phases under isocratic conditions. The dependence of experimental retention data on the degree of polymerization (p) and on mobile phase composition (φ) was characterized by to an approach developed by Jandera et al. The bulky repeating unit and the relatively highly polar end groups of the polyesters both had a large influence on retention behaviour. The two effects in combination explain the molar-mass-independent retention observed experimentally at a particular mobile phase composition for all the mobile phase—stationary phase combinations investigated. These conditions were found to be independent of the type of end group. End group separation on a silica column improves when the polarity of the less polar solvent is increased. End group separation is better on the PA column because of a greater difference between the adsorption energy of the alcohol and acid end groups. Better prediction of retention data on the PA column was achieved by use of an approach which assumes two different types of adsorption site. Results enabled further understanding of retention behaviour in normalphase gradient polymer-elution chromatography (NPGPEC) and explained both the dependence of the order of elution onp and differences between the end-group selectivity of different systems.     

UPLC a Powerful Tool for the Separation of Imidazolium Ionic Liquid Cations

Ultra-performance liquid chromatography (UPLC) in reversed-phase (RP), ion pair (IP) and hydrophilic interaction chromatography (HILIC) has been investigated for the separation of imidazolium-based ionic liquid (IL) cations. Among the three stationary phases (i.e., C18, C8 and phenyl) studied under RP conditions the phenyl phase provided much stronger retention for the IL cations. Four acids (hydrochloric, methanesulfonic, perchloric and trifluoroacetic) as mobile phase additives were compared in light of their effects on the retention of IL cations. It was shown that the retention of all IL cations decreased upon acidification of the mobile phase, possibly due to suppression of residual silanol ionization. Very fast (~3 min) and efficient RP-UPLC separation of six cations was achieved by gradient elution with acetonitrile?Cwater mobile phase containing 2.5 mmol L^?1 perchloric acid. In IP-UPLC all solutes were well resolved in about 4 min by gradient elution with acetonitrile?Cwater mobile phase containing 1 mmol L^?1 sodium 1-octanesulfonate as ion pairing reagent. Finally, under HILIC conditions by using isocratic elution with acetonitrile?Cwater (85:15, v/v) mobile phase containing 5 mmol L^?1 ammonium formate (pH 3.2) the separation time was reduced to less than 2 min while maintaining excellent peak shapes and sufficient resolution. Compared to current LC systems UPLC allowed considerably faster separations with better peak shapes.     

LC with a Teicoplanin Aglycone Chiral Sorbent for the Separation of the Enantiomers of Non-Steroidal Anti-Inflammatory Drugs: An Evaluation of Chiral Capillary Columns

A capillary column with a teicoplanin aglycone (TAG) stationary phase (CSP) was used for enantioselective separation of selected profen non-steroidal anti-inflammatory drugs in capillary liquid chromatography (cLC). The effect of variations in the mobile phase composition on the retention and enantioselective separation was examined. The best resolution was attained in the mobile phase composed of 40/60 (v/v) methanol/1.0% triethylamine acetate buffer, pH 4.0 or 4.5. Under the optimized separation conditions, five of the set of eight analytes were enantioresolved with resolution values better than 0.9. Only fenoprofen was not enantioseparated in any system tested. The optimized separation conditions were used for evaluation of three chiral capillary columns (all prepared in the same way in our laboratory) in terms of the repeatability and reproducibility of the results. The run-to-run repeatability was expressed in terms of the relative standard deviation (RSD) values, obtained from ten independent measurements, for the following parameters: the retention factor for the first eluted enantiomer (k ₁), the selectivity (α), the enantioresolution (R), the theoretical plate count per meter for the first eluted enantiomer (N ₁) and the elution curve asymmetry for the first eluted enantiomer (As ₁). None of the RSD values exceeded 8%. The column-to-column reproducibility of these parameters ranged between 1 and 9%. The results obtained with TAG based CSPs in cLC (a laboratory packed capillary column) were compared with those obtained by classical high-performance liquid chromatography (HPLC) with a commercially available column. The cLC procedure provided a better enantioresolution and the elution curves had a better symmetry.

     

Retention and column efficiency in reversed phase liquid chromatography as a function of pH for optimization purposes

Summary The effects of pH on both the solute retention and the peak shape of ionogenic compounds are studied in order to propose accurate models for pH optimization purposes. Several mathematical models (theoretical and empirical) for describing the variation of the retention factor versus pH are compared within different pH ranges. Limits of such models used for optimizing the pH by requiring only 3 preliminary experimental runs, are discussed in terms of deviations (≤±5%) of predicted retention times from experimental retention times. An original procedure is developed for selecting the most convenient retention model, from a given set of three retention data. This set is also applied to modeling the variation of both peak width and peak asymmetry with mobile phase pH conditions. Such a procedure is demonstrated as helpful for the separation of ionogenic solutes by considering mobile phase pH as an additional variable that can be useful during optimization procedures.     

LC Enantioseparation of Tryptophan Analogs on α-Cyclodextrin Stationary Phase

For the direct separation of enantiomers of tryptophan analogs, a native α-cyclodextrin-based Cyclobond III chiral stationary phase was examined. The separation conditions were optimized by variation of the different chromatographic parameters, and data are reported as retention factors, separation factors and resolutions. The nature and concentration of the buffers as mobile phase additivies exerted only slight effects on the retention and resolution. In all cases, the erythro isomers could be separated significantly better than the threo ones. With increasing hydrophobicity of the analytes, the retention time increased, but no clear trend could be observed between the resolution and the hydrophobicity. The sequence of elution of the enantiomers was in most cases determined by spiking the racemic samples with enantiorich analytes.     

Optimization of the separation conditions of tetracyclines on a preselected reversed-phase column with embedded urea group

The use of a C12 stationary phase with embedded polar group has been investigated for the separation of seven tetracyclines. The influence of pH, organic modifier, buffer, and temperature on the peak shape and analyte separation was discussed. It appears that all the chromatographic conditions had a great effect on both the resolution and peak shape whereas the elution order was not affected. The baseline separation with symmetrical peaks of the seven tetracyclines can be obtained with a mobile phase containing either 5 mM phosphate buffer pH 2.5/ACN (84:16 v/v) or 5 mM perchlorate buffer pH 2.5/ACN (75:25 v/v) at a temperature not exceeding 20 degrees C. This study reveals that the retention mechanism is ion-pairing.     

Automated screening of reversed‐phase stationary phases for small‐molecule separations using liquid chromatography with mass spectrometry

There are various reversed‐phase stationary phases that offer significant differences in selectivity and retention. To investigate different reversed‐phase stationary phases (aqueous stable C₁₈, biphenyl, pentafluorophenyl propyl, and polar‐embedded alkyl) in an automated fashion, commercial software and associated hardware for mobile phase and column selection were used in conjunction with liquid chromatography and a triple quadrupole mass spectrometer detector. A model analyte mixture was prepared using a combination of standards from varying classes of analytes (including drugs, drugs of abuse, amino acids, nicotine, and nicotine‐like compounds). Chromatographic results revealed diverse variations in selectivity and peak shape. Differences in the elution order of analytes on the polar‐embedded alkyl phase for several analytes showed distinct selectivity differences compared to the aqueous C₁₈ phase. The electron‐rich pentafluorophenyl propyl phase showed unique selectivity toward protonated amines. The biphenyl phase provided further changes in selectivity relative to C₁₈ with a methanolic phase, but it behaved very similarly to a C₁₈ when an acetonitrile‐based mobile phase was evaluated. This study shows the value of rapid column screening as an alternative to excessive mobile phase variation to obtain suitable chromatographic settings for analyte separation.     

Computerized optimization of gradient elution conditions with ternary solvent mobile phases in RPLC

Summary In this work, an optimization procedure for gradient RPLC separation, using ternary mobile phases, is described. This procedure requires eight preliminary experiments in gradient elution mode to predict the retention surface for each solute over the whole triangular space. This is followed by computerized calculations to determine the best ternary gradient elution profile with respect to both selectivity and analysis time. The efficiency of this procedure from the point of view of rapidity and of accuracy, is illustrated for the specific separation of twelve phenyl urea herbicides.     

Investigation of the novel mixed-mode stationary phase for capillary electrochromatography. II. Separation of amino acids and peptides on sulfonated naphthalimido-modified silyl silica gel

The potential of 3-(4-sulfo-1,8-naphthalimido)propyl-modified silyl silica gel (SNAIP) as a mixed-mode stationary phase for capillary electrochromatography (CEC) was investigated for the separation of charged analytes, taking four amino acids (tyrosine, phenylalanine, tryptophan, histidine) as model analytes. The elution process of these charged analytes in CEC with SNAIP was dominated by a combination of both electrophoretic process and chromatographic process involving hydrophobic as well as electrostatic interactions. In order to study the retention mechanism, the CEC retention factor k* and the velocity factor ke* were measured for the amino acids, which allowed the assessment of the respective contribution from the differential processes underlying the separation. Migration and retention could be mediated by changing various mobile phase compositions, including buffer pH, buffer concentration, and concentration of organic solvent. Based on the results obtained by separation of the amino acids, the separation of eight peptides (Gly-Val, Gly-Phe, Gly-Ile, Gly-His, Gly-Lys, Lys-Lys, Gly-Gly-Gly, Gly-Gly-His) was attempted. A good separation was achieved under an isocratic elution with a mobile phase consisting of 35 mM phosphate buffer (pH 3.8) and 40% methanol.     

Separation and control of the elution order of N-t-butyloxycarbonyl amino acids D/L isomers by reversed-phase HPLC using cyclodextrins as chiral selectors for the mobile phase.

The enantiomeric resolution of N-t-butyloxycarbonyl (N-t-Boc) amino acids D/L isomers by reversed-phase HPLC was investigated using cyclodextrins (CD's) as chiral selectors for the mobile phase. The use of a low pH (pH<4) for the mobile phase enabled the enantioseparation of N-t-Boc amino acids. The opposite elution order of D/L isomers was observed when hydroxypropyl-derivatized beta-CD was used instead of native beta-CD. A computer simulation of the enantioseparation showed that the ratio of the retention factors of the chiral selector and the sample determined the elution order and the resolution. When the retention factor of the chiral selector is smaller than that of the sample, an isomer having larger complex formation constant eluted faster. However, when the chiral selector had a larger retention factor than the sample, an opposite elution order of the isomers was obtained. The large difference in the retention factors between the chiral selector and the sample led to good enantiomeric separation.     

LC with a Teicoplanin Aglycone Chiral Sorbent for the Separation of the Enantiomers of Non-Steroidal Anti-Inflammatory Drugs: An Evaluation of Chiral Capillary Columns

A capillary column with a teicoplanin aglycone (TAG) stationary phase (CSP) was used for enantioselective separation of selected profen non-steroidal anti-inflammatory drugs in capillary liquid chromatography (cLC). The effect of variations in the mobile phase composition on the retention and enantioselective separation was examined. The best resolution was attained in the mobile phase composed of 40/60 (v/v) methanol/1.0% triethylamine acetate buffer, pH 4.0 or 4.5. Under the optimized separation conditions, five of the set of eight analytes were enantioresolved with resolution values better than 0.9. Only fenoprofen was not enantioseparated in any system tested. The optimized separation conditions were used for evaluation of three chiral capillary columns (all prepared in the same way in our laboratory) in terms of the repeatability and reproducibility of the results. The run-to-run repeatability was expressed in terms of the relative standard deviation (RSD) values, obtained from ten independent measurements, for the following parameters: the retention factor for the first eluted enantiomer (k ₁), the selectivity (α), the enantioresolution (R), the theoretical plate count per meter for the first eluted enantiomer (N ₁) and the elution curve asymmetry for the first eluted enantiomer (As ₁). None of the RSD values exceeded 8%. The column-to-column reproducibility of these parameters ranged between 1 and 9%. The results obtained with TAG based CSPs in cLC (a laboratory packed capillary column) were compared with those obtained by classical high-performance liquid chromatography (HPLC) with a commercially available column. The cLC procedure provided a better enantioresolution and the elution curves had a better symmetry.     

Gradient HPLC-diode array detector stability-indicating determination of lidocaine hydrochloride and cetylpyridinium chloride in two combined oral gel dosage forms

A simple, rapid, and selective HPLC-diode array detector method was developed for the simultaneous determination of lidocaine hydrochloride (LD) and cetylpyridinium chloride (CPC) in two combined pharmaceutical formulations. Effective chromatographic separation was achieved on a Zorbax SB-C8 (4.6 x 250 mm, 5 microm particle size) column with gradient elution using a mobile phase composed of 0.05 M phosphoric acid and acetonitrile. The gradient elution started with 25% (v/v) acetonitrile, ramped up linearly to 85% in 5 min, and then was constant until the end of the run. The mobile phase was pumped at a flow rate of 1.2 mL/min. The multiple wavelength detector was set at 214 and 258 nm, and quantification of the analytes was based on measuring their peak areas. The retention times for LD and CPC were about 3.4 and 7.3 min, respectively. The reliability and analytical performance of the proposed HPLC procedure were statistically validated with respect to linearity, range, precision, accuracy, selectivity, robustness, LOD, and LOQ. Calibration curves were linear in the range of 5-200 and 10-400 microg/mL for LD and CPC, respectively, with correlation coefficients > 0.999. The proposed method was proven to be stability-indicating by the resolution of the two analytes from the related substance and potential impurity (2,6-dimethylaniline) as well as from forced-degradation products. The validated HPLC method was extended to the analysis of LD and CPC in two combined oral gel preparations for which the two analytes were successfully resolved from the pharmaceutical adjuvants and quantified with recoveries not less than 97.9%.     

Gradient HPLC-DAD stability indicating determination of miconazole nitrate and lidocaine hydrochloride in their combined oral gel dosage form

The pharmaceutical combination of miconazole nitrate (MZ) and lidocaine hydrochloride (LD) is used in the curative and prophylactic therapy of the oral and gastro-intestinal infections caused by Candida albicans. To the best of our knowledge, no attempts have yet been made to assay this combination by any analytical method. A simple and selective high-performance liquid chromatography-diode array detection (HPLC-DAD) stability-indicating method was developed for the simultaneous determination of MZ and LD in their combined formulation. Effective chromatographic separation was achieved using a Zorbax SB-C8 column with gradient elution of the mobile phase composed of 0.05 M phosphoric acid and acetonitrile. The gradient elution started with 25% (by volume) acetonitrile, ramped up linearly to 65% in 6 min, then kept constant until the end of the run. The mobile phase was pumped at a flow rate of 1 mL/min. The multiple wavelength detector was set at 215 nm and analytes were quantified by measuring their peak areas. The retention times for LD and MZ were approximately 4.1 and 8.4 min, respectively. The reliability and analytical performance of the proposed HPLC procedure were statistically validated with respect to linearity, ranges, precision, accuracy, selectivity, robustness, detection and quantification limits. Calibration curves were linear in the ranges of 5-100 μg/ml for both drugs with correlation coefficients > 0.999. Both drugs were subjected to stress conditions of hydrolysis, oxidation, photolysis and thermal degradation. The proposed method proved to be stability-indicating by the resolution of the two analytes from the related substance and potential impurity (2,6-dimethylaniline) and from the forced-degradation products. The validated HPLC method was applied to the analysis of MZ and LD in the combined oral gel preparation, in which the two analytes were successfully quantified and resolved from the pharmaceutical additives. The proposed method made use of DAD as a tool for peak identity and purity confirmation.     

Optimizing separations in reversed-phase liquid chromatography by varying pH and solvent composition

Summary An interpretive optimization procedure in which pH can be one of the variables is presented with the emphasis on optimizing separations. When varying the pH in reversed-phase liquid chromatography the retention of ionogenic solutes will change. Thus, the selectivity between ionogenic and neutral solutes or between ionogenic solutes mutually can be optimized. However, pH also greatly affects the efficiency (plate count) and peak shape (asymmetry). Optimum selectivity (i.e. large differences in retention times) may be observed under conditions where peaks are broad and asymmetrical. Thus, it is essential to simultaneously consider retention, peak width and peak shape and their effects on separation (effective resolution) in pH-optimization studies. A procedure in which this is done is presented and applied to optimizing the separation of a synthetic mixture of selected pharmaceuticals. After initial experiments to establish the parameter space (boundaries for pH and binary methanol — water composition), twelve experiments are performed according to a 3×4 experimental design. At each loaction the retention, peak height, peak area and peak symmetry are recorded for each solute. These data are then used to build models for each of the four characteristics and for each solute. From this set of models the response surface, describing the quality of separation as a function of pH and composition, can be calculated. A variety of optimization criteria (quantifying quality of separation) can be used. The optimum corresponds to the highest point on the response surface.     

HPLC enantioseparation of β2‐homoamino acids using crown ether‐based chiral stationary phase

RP high‐performance liquid chromatographic methods were developed for the enantioseparation of eleven unusual β²‐homoamino acids. The underivatized analytes were separated on a chiral stationary phase containing (+)‐(18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid as chiral selector. The effects of organic (alcoholic) and acidic modifiers, the mobile phase composition and temperature on the separation were investigated. The structures of the substituents in the α‐position of the analytes substantially influenced the retention and resolution. The elution sequence was determined in some cases: the S enantiomers eluted before the R enantiomers.