Triggering water exchange mechanisms via chelate architecture. Shielding of transition metal centers by aminopolycarboxylate spectator ligands

Paramagnetic effects on the relaxation rate and shift difference of the (17)O nucleus of bulk water enable the study of water exchange mechanisms on transition metal complexes by variable temperature and variable pressure NMR. The water exchange kinetics of [Mn(II)(edta)(H2O)](2-) (CN 7, hexacoordinated edta) was reinvestigated and complemented by variable pressure NMR data. The results revealed a rapid water exchange reaction for the [Mn(II)(edta)(H2O)](2-) complex with a rate constant of k(ex) = (4.1 +/- 0.4) x 10(8) s(-1) at 298.2 K and ambient pressure. The activation parameters DeltaH(double dagger), DeltaS(double dagger), and DeltaV(double dagger) are 36.6 +/- 0.8 kJ mol(-1), +43 +/- 3 J K(-1) mol(-1), and +3.4 +/- 0.2 cm(3) mol(-1), which are in line with a dissociatively activated interchange (I(d)) mechanism. To analyze the structural influence of the chelate, the investigation was complemented by studies on complexes of the edta-related tmdta (trimethylenediaminetetraacetate) chelate. The kinetic parameters for [Fe(II)(tmdta)(H2O)](2-) are k(ex) = (5.5 +/- 0.5) x 10(6) s(-1) at 298.2 K, DeltaH(double dagger) = 43 +/- 3 kJ mol(-1), DeltaS(double dagger) = +30 +/- 13 J K(-1) mol(-1), and DeltaV(double dagger) = +15.7 +/- 1.5 cm(3) mol(-1), and those for [Mn(II)(tmdta)(H2O)](2-) are k(ex) = (1.3 +/- 0.1) x 10(8) s(-1) at 298.2 K, DeltaH(double dagger) = 37.2 +/- 0.8 kJ mol(-1), DeltaS(double dagger) = +35 +/- 3 J K(-1) mol(-1), and DeltaV(double dagger) = +8.7 +/- 0.6 cm(3) mol(-1). The water containing species, [Fe(III)(tmdta)(H2O)](-) with a fraction of 0.2, is in equilibrium with the water-free hexa-coordinate form, [Fe(III)(tmdta)](-). The kinetic parameters for [Fe(III)(tmdta)(H2O)](-) are k(ex) = (1.9 +/- 0.8) x 10(7) s(-1) at 298.2 K, DeltaH(double dagger) = 42 +/- 3 kJ mol(-1), DeltaS(double dagger) = +36 +/- 10 J K(-1) mol(-1), and DeltaV(double dagger) = +7.2 +/- 2.7 cm(3) mol(-1). The data for the mentioned tmdta complexes indicate a dissociatively activated exchange mechanism in all cases with a clear relationship between the sterical hindrance that arises from the ligand architecture and mechanistic details of the exchange process for seven-coordinate complexes. The unexpected kinetic and mechanistic behavior of [Ni(II)(edta')(H2O)](2-) and [Ni(II)(tmdta')(H2O)](2-) is accounted for in terms of the different coordination number due to the strong preference for an octahedral coordination environment and thus a coordination equilibrium between the water-free, hexadentate [M(L)](n+) and the aqua-pentadentate forms [M(L')(H2O)](n+) of the Ni(II)-edta complex, which was studied in detail by variable temperature and pressure UV-vis experiments. For [Ni(II)(edta')(H2O)](2-) (CN 6, pentacoordinated edta) a water substitution rate constant of (2.6 +/- 0.2) x 10(5) s(-1) at 298.2 K and ambient pressure was measured, and the activation parameters DeltaH(double dagger), DeltaS(double dagger), and DeltaV(double dagger) were found to be 34 +/- 1 kJ mol(-1), -27 +/- 2 J K(-1) mol(-1), and +1.8 +/- 0.1 cm(3) mol(-1), respectively. For [Ni(II)(tmdta')(H2O)](2-), we found k = (6.4 +/- 1.4) x 10(5) s(-1) at 298.2 K, DeltaH(double dagger) = 22 +/- 4 kJ mol(-1), and DeltaS(double dagger) = -59 +/- 5 J K(-1) mol(-1). The process is referred to as a water substitution instead of a water exchange reaction, since these observations refer to the intramolecular displacement of coordinated water by the carboxylate moiety in a ring-closure reaction.     

Quantitative analysis of irbesartan in commercial dosage forms by kinetic spectrophotometry

The objective of this work is to develop a new kinetic spectrophotometric method for the determination of irbesartan in pharmaceutical formulations. The method is based on the reaction of carboxylic acid group of the oxidized irbesartan with a mixture of potassium iodate (KIO(3)) and iodide (KI) to form yellow colored triiodide ions in aqueous medium at 30+/-1 degrees C. The reaction is followed spectrophotometrically by measuring the rate of change of absorbance at 352 nm. The initial-rate and fixed-time (DeltaA) methods are adopted for constructing the calibration curves, which were found to be linear over the concentration ranges of 10.0-60.0 and 7.5-60.0 microg ml(-1) respectively. The regression analysis of calibration data yielded the linear equations: rate=-2.138 x 10(-6)+1.058 x 10(-4)C and DeltaA=-3.75 x 10(-3)+3.25 x 10(-3)C for initial rate and fixed time (DeltaA) methods, respectively. The limit of detection for initial rate and fixed time methods are 0.21 and 2.40 mug ml(-1), respectively. The various activation parameters such as E(a), DeltaH++, DeltaS++ and DeltaG++ are also calculated for the reaction and found to be 70.95+/-0.43 kJ mol(-1), 68.48+/-0.21 kJ mol(-1), 16.54+/-0.24 J K(-1) mol(-1) and -4.94+/-0.07 kJ mol(-1), respectively. The proposed methods are optimized and validated as per the guidelines of International Conference on Harmonisation (U.S.A.). The point and interval hypothesis tests have been performed which indicate that there is no significant difference between the proposed methods and the reference method. The methods have been successfully applied to the determination of irbesartan in commercial dosage forms.     

Activation energy for the disproportionation of HBrO2 and estimated heats of formation of HBrO2 and BrO2

The kinetics of the reaction HBrO(2) + HBrO(2) --> HOBr + BrO(3)(-) + H(+) is investigated in aqueous HClO(4) (0.04-0.9 M) and H(2)SO(4) (0.3-0.9 M) media and at temperatures in the range 15-38 degrees C. The reaction is found to be cleanly second order in [HBrO(2)], with the experimental rate constant having the form k(exp) = k + k'[H(+)]. The half-life of the reaction is on the order of a few tenths of a second in the range 0.01 M < [HBrO(2)](0) < 0.02 M. The detailed mechanism of this reaction is discussed. The activation parameters for kare found to be E(double dagger) = 19.0 +/- 0.9 kJ/mol and DeltaS(double dagger) = -132 +/- 3 J/(K mol) in HClO(4), and E(double dagger) = 23.0 +/- 0.5 kJ/mol and DeltaS(double dagger) = -119 +/- 1 J/(K mol) in H(2)SO(4). The activation parameters for k' are found to be E(double dagger) = 25.8 +/- 0.5 kJ/mol and DeltaS(double dagger) = -106 +/- 1 J/(K mol) in HClO(4), and E(double dagger) = 18 +/- 3 kJ/mol and DeltaS(double dagger) = -130 +/- 11 J/(K mol) in H(2)SO(4). The values Delta(f)H(29)(8)(0)[BrO(2)(aq)] = 157 kJ/mol and Delta(f)H(29)(8)(0)[HBrO(2)(aq)] = -33 kJ/mol are estimated using a trend analysis (bond strengths) based on the assumption Delta(f)H(29)(8)(0)[HBrO(2)(aq)] lies between Delta(f)H(29)(8)(0)[HOBr(aq)] and Delta(f)H(29)(8)(0)[HBrO(3)(aq)] as Delta(f)H(29)(8)(0)[HClO(2)(aq)] lies between Delta(f)H(29)(8)(0)[HOCl(aq)] and Delta(f)H(29)(8)(0)[HClO(3)(aq)]. The estimated value of Delta(f)H(29)(8)(0)[BrO(2)(aq)] agrees well with calculated gas-phase values, but the estimated value of Delta(f)H(29)(8)(0)[HBrO(2)(aq)], as well as the tabulated value of Delta(f)H(29)(8)(0)[HClO(2)(aq)], is in substantial disagreement with calculated gas-phase values. Values of Delta(r)H(0) are estimated for various reactions involving BrO(2) or HBrO(2).     

3,3'-Bis(trisarylsilyl)-substituted binaphtholate rare earth metal catalysts for asymmetric hydroamination

Chiral 3,3'-bis(trisarylsilyl)-substituted binaphtholate rare earth metal complexes (R)-[Ln{Binol-SiAr3}(o-C6H4CH2NMe2)(Me2NCH2Ph)] (Ln = Sc, Lu, Y; Binol-SiAr3 = 3,3'-bis(trisarylsilyl)-2,2'-dihydroxy-1,1'-binaphthyl; Ar = Ph (2-Ln), 3,5-xylyl (3-Ln)) and (R)-[La{Binol-Si(3,5-xylyl)3}{E(SiMe3)2}(THF)2] (E = CH (4a), N (4b)) are accessible via facile arene, alkane, and amine elimination. They are efficient catalysts for the asymmetric hydroamination/cyclization of aminoalkenes, giving TOF of up to 840 h(-1) at 25 degrees C for 2,2-diphenyl-pent-4-enylamine (5c) using (R)-2-Y. Enantioselectivities of up to 95% ee were achieved in the cyclization of 5c with (R)-2-Sc. The reactions show apparently zero-order rate dependence on substrate concentration and first-order rate dependence on catalyst concentration, but rates depend on total amine concentrations. Activation parameters for the cyclization of pent-4-enylamine using (R)-2-Y (deltaH(S)(double dagger) = 57.4(0.8) kJ mol(-1) and deltaS(S)(double dagger) = -102(3) J K(-1) mol(-1); deltaH(R)(double dagger) = 61.5(0.7) kJ mol(-1) and deltaS(R)(double dagger) = -103(3) J K(-1) mol(-1)) indicate a highly organized transition state. The binaphtholate catalysts were also applied to the kinetic resolution of chiral alpha-substituted aminoalkenes with resolution factors f of up to 19. The 2,5-disubstituted aminopentenes were formed in 7:1 to > or = 50:1 trans diastereoselectivity, depending on the size of the alpha-substituent of the aminoalkene. Rate studies with (S)-1-phenyl-pent-4-enylamine ((S)-15e) gave the activation parameters for the matching (deltaH(double dagger) = 52.2(2.8) kJ mol(-1), deltaS(double dagger) = -127(8) J K(-1) mol(-1) using (S)-2-Y) and mismatching (deltaH(double dagger) = 57.7(1.3) kJ mol(-1), deltaS(double dagger) = -126(4) J K(-1) mol(-1) using (R)-2-Y) substrate/catalyst combination. The absolute configuration of the Mosher amide of (2S)-2-methyl-4,4-diphenyl-pyrrolidine and (2R)-methyl-(5S)-phenyl-pyrrolidinium chloride, prepared from (S)-15e, were determined by crystallographic analysis. Catalyst (R)-4a showed activity in the anti-Markovnikov addition of n-propylamine to styrene.     

The OH* + CH3SH reaction: support for an addition-elimination mechanism from ab initio calculations

Several intermediates for the CH(3)SH + OH(*) --> CH(3)S(*) + H(2)O reaction were identified using MP2(full) 6-311+g(2df,p) ab initio calculations. An adduct, CH(3)S(H)OH(*), I, with electronic energy 13.63 kJ mol(-1) lower than the reactants, and a transition state, II(double dagger), located 5.14 kJ mol(-1) above I, are identified as the entrance channel for an addition-elimination reaction mechanism. After adding zero-point and thermal energies, DeltaH(r,298) ( degrees )(reactants --> I) = -4.85 kJ mol(-1) and DeltaH(298) (double dagger)(I --> II(double dagger)) = +0.10 kJ mol(-1), which indicates that the potential energy surface is broad and flat near the transition state. The calculated imaginary vibrational frequency of the transition state, 62i cm(-1), is also consistent with an addition-elimination mechanism. These calculations are consistent with experimental observations of the OH(*) + CH(3)SH reaction that favored an addition-elimination mechanism rather than direct hydrogen atom abstraction. An alternative reaction, CH(3)SH + OH(*) --> CH(3)SOH + H(*), with DeltaH(r,298) ( degrees ) = +56.94 kJ mol(-1) was also studied, leading to a determination of DeltaH(f,298) ( degrees )(CH(3)SOH) = -149.8 kJ mol(-1).     

Structural and kinetic studies on uranyl(V) carbonate complex using 13C NMR spectroscopy

We have measured 13C NMR spectra of uranyl(V) carbonate complex in D2O solution containing 1.003 M Na2(13)CO3 at various temperatures. Two singlet signals corresponding to free and coordinated CO3(2-) were observed at 169.13 and 106.70 ppm, respectively. From the peak area ratio, the structure of the uranyl(V) carbonate complex was determined as [U(V)O2(CO3)3]5-. Furthermore, kinetic analyses of the exchange reaction of free and coordinated CO3(2-) in [U(V)O2(CO3)3]5- were carried out using 13C NMR line-broadening. As a result, the first-order rate constant at 298 K and the activation parameters for CO3(2-) exchange reaction in [U(V)O2(CO3)3]5- were evaluated as 1.13 x 10(3) s(-1) and deltaH(double dagger) = 62.0 +/- 0.7 kJ x mol(-1), deltaS(double dagger) = 22 +/- 3 J x mol(-1) x K(-1), respectively. We suggest that the exchange follows a dissociative mechanism as in the corresponding [U(VI)O2(CO3)3]4- complex.     

Water exchange from the oxo-centered rhodium(III) trimer [Rh3(mu3-O)(mu-O2CCH3)6(OH2)3]+: a high-pressure 17O NMR study

Water exchange from the oxo-centered rhodium(III) trimer, [Rh3(mu3-O)(mu-O2CCH3)6(OH2)3]+, was investigated using variable-temperature (272.8-281.6 K) and variable-pressure (0.1-200 MPa) 17O NMR spectroscopy. The exchange reaction was also monitored at three different acidities (pH = 1.8, 2.9, and 5.7) in which the molecule is in the fully protonated form (pKa = 8.3 (+/-0.2), I = 0.1 M, T = 298 K). The temperature dependence of the pseudo-first-order rate coefficient for water exchange yields the following kinetic parameters: k(ex)298 = 5 x 10(-3) s(-1), deltaH(double dagger) = 99 (+/-3) kJ mol(-1), and deltaS(double dagger) = 43 (+/-10) J K(-1) mol(-1). The enhanced reactivity of the terminal waters, some 6 orders of magnitude faster than water exchange from Rh(H2O)6(3+), is likely due to trans-labilization from the central oxide ion. Also, another contributing factor is the low average charge on the metal ions (+0.33/Rh). Variation of reaction rate with pressure results in a deltaV(double dagger) = +5.3 (+/-0.4) cm3 mol(-1), indicative of an interchange-dissociative (I(d)) pathway. These results are consistent with those published by Sasaki et al. who proposed that water substitution from rhodium(III) and ruthenium(III) oxo-centered trimers follows a dissociative mechanism based on highly positive activation parameters (Sasaki, Y.; Nagasawa, A.; Tokiwa-Yamanoto, A.; Ito, T. Inorg. Chim. Acta 1993, 212, 175-182).     

Flow injection turbidimetric determination of thiamine in pharmaceutical formulations using silicotungstic acid as precipitant reagent

A simple flow injection system is proposed for the determination of thiamine in pharmaceutical formulations. The determination is based on the precipitation reaction of thiamine with silicotungstic acid in acidic medium to form a thiamine silicotungstate suspension that is measured at 420 nm. Adding 0.05% (w/v) poly(ethyleneglycol) in the carrier solution (0.5 mol l(-1) hydrochloric acid), an improvement in the sensitivity, repeatability and baseline stability of the flow injection system was obtained. The calibration graph was linear in the thiamine concentration range from 5.0x10(-5) to 3.0x10(-4) mol l(-1) with a detection limit of 1.0x10(-5) mol l(-1). The relative standard deviations for ten successive measurements of 1.0x10(-4) mol l(-1) and 2.5x10(-4) mol l(-1) thiamine were less than 1% and an analytical frequency of 90 h(-1) was obtained.     

Chemiluminescence determination of fluoroquinolones using Fenton system in the presence of terbium(iii) ions

A simple new chemiluminescent, CL, method is described for the determination of fluoroquinolones such as: ciprofloxacin (CF), norfloxacin (NF), and ofloxacin (OF). This method is based on the measurement of terbium(iii) emission. This emission follows an energy transfer to the uncomplexed terbium(iii) ions from the excited products of fluoroquinolone oxidations. Under optimum conditions, calibration graphs were obtained for 2 × 10(-8)-2 × 10(-6) mol L(-1) of NF; 3 × 10(-8)-2 × 10(-6) mol L(-1) of CF and 4 × 10(-7)-5 × 10(-5) mol L(-1) of OF. The detection limits are 7 × 10(-9) mol L(-1) norfloxacin, 1 × 10(-8) mol L(-1) ciprofloxacin and 1.5 × 10(-7) mol L(-1) ofloxacin. The method was successfully applied to the determination of these drugs in pharmaceutical formulations.     

Developing a new class of axial chiral phosphorus ligands: preparation and characterization of enantiopure atropisomeric phosphinines

Both enantiomers of the first atropisomeric phosphinine (1) have been isolated by using analytical HPLC on a chiral stationary phase. The enrichment of one enantiomer and a subsequent investigation into its racemization kinetics revealed a barrier for internal rotation of DeltaG(298)(double dagger) = (109.5+/-0.5) kJ mol(-1), which is in excellent agreement with the theoretically predicted value of DeltaG(298)(double dagger) =116 kJ mol(-1). Further analysis with UV and circular dichroism spectroscopies and density functional theory calculations led to the determination and assignment of the absolute configurations of both enantiomers. These results are the basis for future investigations into this new class of axially chiral phosphinine-based ligands and their possible applications in asymmetric homogeneous catalysis.     

Rate constant and activation energy measurement for the reaction of atomic hydrogen with thiocyanate and azide in aqueous solution

Arrhenius parameters for the reaction of hydrogen atoms with azide and thiocyanate in aqueous solution have been determined using electron pulse radiolysis and electron paramagnetic resonance free induction decay attenuation measurements. Absolute values for SCN-, N3(-), and HN3 were well-described over the temperature range of 9-81 degrees C by the equations log k5 = (12.03 +/- 0.12) - [(21.05 +/- 0.66 kJ mol(-1))/2.303RT], log k10 = (12.75 +/- 0.21) - [(18.43 +/- 1.22 kJ mol(-1))/2.303RT], and log k15 = (11.59 +/- 0.12) - [(21.44 +/- 0.69 kJ mol(-1))/2.303RT], corresponding to room temperature (22 degrees C) rate constants of (2.07 +/- 0.03) x 10(8), (3.15 +/- 0.08) x 10(9), and (6.31 +/- 0.05) x 10(7) M(-1) s(-1) and activation energies for these chemicals of 21.05 +/- 0.66, 18.4 +/- 1.2, and 21.44 +/- 0.69 kJ mol(-1), respectively. The similarity of these three measured activation energies, taken together with the available information on reaction products, suggests a similar reaction mechanism, which is proposed to be an initial hydrogen atom adduct formation in these molecules, followed by single bond breakage.     

双波长叠加吸收光谱法测定药物中的酒石酸美托洛尔

建立了快速、准确测定药物中酒石酸美托洛尔的双波长叠加可见吸收光谱法。在pH 4.55的酸性Tris-盐酸介质及586~740 nm波长范围内,偶氮氯膦Ⅲ与酒石酸美托洛尔反应生成具有两个明显正吸收峰的离子缔合物,最大正吸收波长位于614 nm,次大正吸收波长位于664 nm,表观摩尔吸光系数(κ)分别为6.03×10~4L/(mol·cm)(614 nm)和5.37×10~4L/(mol·cm)(664 nm),酒石酸美托洛尔的质量浓度在0.2~8.6 mg/L范围内服从朗伯-比尔定律,检出限为0.13 mg/L(614 nm)和0.15 mg/L(664 nm)。当采用双波长叠加法测定时,其表观摩尔吸光系数(κ)可达1.14×10~5L/(mol·cm),检出限为0.072 mg/L。该文同时探讨了显色反应的适宜条件、共存物质的影响及吸收光谱特征。实验发现,该反应体系的单波长及双波长叠加吸收光谱法的表观摩尔吸光系数可达5.37×10~4~1.14×10~5L/(mol·cm),方法可用于市售药物中酒石酸美托洛尔含量的测定,加标回收率为98.0%~101%,相对标准偏差(n=6)为1.8%~2.3%。     

Interplay of Twisting and Folding in Overcrowded Heteromerous Bistricyclic Aromatic Enes

Fluorenylidenexanthenes 5-7 were synthesized by 2-fold extrusion diazo-thione couplings. 7 exhibited yellow crystals and purple (560 nm) solutions. (1)H NMR of 5 and 7 indicated subtle equilibria twisted (t) right harpoon over left harpoon anti-folded (a) major/minor conformations. (13)C DNMR of 6 gave DeltaG(c)(double dagger)(enantiomerization/inversion) = 26.5 kJ/mol and DeltaG(c)(double dagger)(E,Z-topomerization) = 82.0 kJ/mol. PM3 calculations of 5 revealed minima a, t, ts (twisted/syn-folded), DeltaDeltaH(f) degrees = 0.0, 14.1, 15.6 kJ/mol, and transition states [t-ts], [a-ts], [t( perpendicular)], [a-a], DeltaDeltaH(f) degrees = 16.3, 17.4, 82.2, 99.3 kJ/mol.     

Catalytic spectrophotometric determination of vanadium in seawaters based on the bromate oxidative coupling reaction of metol and 2,3,4-trihydroxybenzoic acid.

A new, simple, sensitive and selective catalytic method is developed for the determination of vanadium in natural and sea waters. The method is based on the catalytic effect of V(V) and/or V(IV) on the bromate oxidative-coupling reaction of metol with 2,3,4-trihydroxybenzoic acid (THBA). The reaction is followed spectrophotometrically by tracing the oxidation product at 380 and/or 570 nm after 5 min of mixing the reagents. The optimum reaction conditions are 6.4 x 10(-3) mol l-1 of metol, 2.0 x 10(-3) mol l-1 of THBA and 0.16 mol l-1 of bromate at 35 degrees C and in the presence of an activator-buffer solution of 1 x 10(-2) mol l-1 of tartrate (pH = 3.10). Following the recommended procedure, V(V) and/or V(IV) can be determined with linear calibration graphs up to 0.75 ng ml-1 and detection limits, based on the 3Sb criterion, of 0.008 and 0.018 ng ml-1 at 380 and 570 nm, respectively. The developed method was successfully applied, without any separation or preconcentration processes, to the determination of vanadium in natural and seawaters following the direct calibration and standard addition techniques, respectively.     

Conformational analysis of indole alkaloids corynantheine and dihydrocorynantheine by dynamic 1H NMR spectroscopy and computational methods: steric effects of ethyl vs vinyl group

1H NMR (400 MHz) spectra of the indole alkaloid dihydrocorynantheine recorded at room temperature show the presence of two conformers near coalescence. Low temperature 1H NMR allowed characterization of the conformational equilibrium, which involves rotation of the 3-methoxypropenoate side chain. Line-shape analysis yielded enthalpy of activation DeltaH(double dagger) = 71 +/- 6 kJ/mol, and entropy of activation DeltaS(double dagger) = 33 +/- 6 J/mol.K. The major and minor conformation contains the methyl ether group above and below the plane of the ring, respectively, as determined by low-temperature NOESY spectra, with free energy difference DeltaG degrees = 1.1 kJ/mol at -40 degrees C. In contrast to dihydrocorynantheine, the corresponding rotamers of corynantheine are in the fast exchange limit at room temperature. The activation parameters determined for corynantheine were DeltaH(double dagger) = 60 +/- 6 kJ/mol and DeltaS(double dagger) = 24 +/- 6 J/mol.K, with DeltaG degrees = 1.3 kJ/mol at -45 degrees C. The difference in the exchange rates of the rotamers of corynantheine and dihydrocorynantheine (respectively, 350 s(-1) and 9 s(-1) at 0 degrees C) reflects the difference in the steric bulk of the vinyl and the ethyl group. The conformational equilibria involving the side chain rotation as well as inversion of the bridgehead nitrogen in corynantheine and dihydrocorynantheine was studied by force-field (Amber and MMFF) and ab initio (density-functional theory at the B3LYP/6-31G level) computational methods, the results of which were in good agreement with the 1H NMR data. However, the calculations identified the rotamers as essentially isoenergetic, the experimental energy differences being to small to be reproduced exactly by the theory. Comparison of density-functional and force-field calculations with experimental results identified Amber as giving the most accurate results in the present case.     

Retro Diels-Alder reactions of 5,6-disubstituted-7-oxabicyclo

Several 5,6-disubstituted-7-oxabicyclo[2.2.1]hept-2-enes (1-4) were synthesized on > or = 0.1 mol scale. The heat-induced retro Diels-Alder (rDA) decomposition of these derivatives was studied by thermal analysis, and the kinetics of the rDA were measured for 4. First-order rate constants (k = 1.91-14.2 x 10(-5) s(-1)), measured at four temperatures between 124 and 150 degrees C, were used to calculate Arrhenius activation parameters Ea (34.5 +/- 0.5 kcal/mol) and ln A (1.77 +/- 0.03 x 10(4)). The observed activation energy was significantly larger (by 9.5 kcal/mol) than that previously measured for the maleic anhydride adduct 1, and this was attributed to the difference in LUMO energies for the two dienophiles. Modeling of the activation parameters found for 4 with density functional theory (DFT) calculations for similar compounds 5 and 6 gave close quantitative correlations for deltaH double dagger, deltaG double dagger, deltaS double dagger. The rDA reactions studied were found to be entropy-driven.     

Colorimetric determination of benzocaine, lignocaine and procaine hydrochlorides in pure form and in pharmaceutical formulations using p-benzoquinone.

A simple, accurate and sensitive method for the microdetermination of benzocaine, lignocaine and procaine hydrochlorides in pure forms and in pharmaceutical formulations is described. The procedure is based on the reaction of those drugs in an aqueous acidic medium with p-benzoquinone to form charge-transfer complexes. The method has been used for the determination of 5.0-70, 5.0-60 and 5.0-90 microg ml(-1) of benzocaine, lignocaine HCl and procaine HCl, respectively. The complexes have apparent molar absorptivities of 1.70 x 10(3), 2.79 x 10(3) and 2.42 x 10(3) L mol(-1) cm(-1) and Sandell sensitivities of 9.72, 10.34 and 11.25 ng cm(-2), respectively. The proposed procedure of analysis is as accurate as the British Pharmacopoeial method (2003). The method was successfully used for the determination of those drugs in the presence of their degradation products, additives and excipients, which were normally encountered in pharmaceutical formulations.     

Clavulanate-selective electrodes - application to pharmaceutical formulations

The construction and assessment of a clavulanate anion-selective electrode and its application to the analysis of pharmaceutical formulations by direct potentiometry are described. The electrode, prepared without inner reference solution, was fabricated by use of a PVC membrane, with bis(triphenyl-phosphoranylidene)ammonium clavulanate as ion-exchanger dissolved in 2-nitrophenyl octyl ether as intermediate solvent and p-t-octylphenol as additive. The response of the electrode was linearly dependent on concentration within the range 2.4 x 10(-3)-1 x 10(-1) mol dm(-3) (ionic strength adjusted to 0.1 mol dm(-3)); the slope of the calibration plot was -59.4+/-0.9 mV decade(-1) and the reproducibility +/-0.6 mV day(-1). The response time was less than 20 s. Relative errors were <3.5% when results from analysis by direct potentiometry were compared with those from the reference method.     

Stoichiometries and thermodynamic stabilities for aqueous sulfate complexes of U(VI)

The formation constants of UO2SO4 (aq), UO2(SO4)2(2-), and UO2(SO4)3(4-) were measured in aqueous solutions from 10 to 75 degrees C by time-resolved laser-induced fluorescence spectroscopy (TRLFS). A constant enthalpy of reaction approach was satisfactorily used to fit the thermodynamic parameters of stepwise complex formation reactions in a 0.1 M Na(+) ionic medium: log 10 K 1(25 degrees C) = 2.45 +/- 0.05, Delta r H1 = 29.1 +/- 4.0 kJ x mol(-1), log10 K2(25 degrees C) = 1.03 +/- 0.04, and Delta r H2 = 16.6 +/- 4.5 kJ x mol(-1). While the enthalpy of the UO2(SO4)2(2-) formation reaction is in good agreement with calorimetric data, that for UO2SO4 (aq) is higher than other values by a few kilojoules per mole. Incomplete knowledge of the speciation may have led to an underestimation of Delta r H1 in previous calorimetric studies. In fact, one of the published calorimetric determinations of Delta r H1 is here supported by the TRLFS results only when reinterpreted with a more correct equilibrium constant value, which shifts the fitted Delta r H1 value up by 9 kJ x mol(-1). UO2(SO 4) 3 (4-) was evidenced in a 3 M Na (+) ionic medium: log10 K3(25 degrees C) = 0.76 +/- 0.20 and Delta r H3 = 11 +/- 8 kJ x mol(-1) were obtained. The fluorescence features of the sulfate complexes were observed to depend on the ionic conditions. Changes in the coordination mode (mono- and bidentate) of the sulfate ligands may explain these observations, in line with recent structural data.     

Kinetics of the reaction of aqueous iron(vi) (FeVIO42-) with ethylenediaminetetraacetic acid

The reaction of aqueous iron(vi) (FeVIO42-, Fe(vi)) with ethylenediaminetetraacetic acid (EDTA) was studied kinetically as a function of pH (1.98-12.40) and temperature (15-45 degrees C) using a stopped flow kinetic technique. The rate law for the reaction of Fe(vi) with EDTA was found to be first-order with respect to each reactant over the entire studied pH range. The observed rate constants, k, decrease with an increase in pH, varying from 4.19 x 10(4) to 8.60 x 10(-2) M(-1) s(-1) over the pH range. The speciation of Fevi (H3FeO4+, H2FeO4, HFeO4-, and FeO42-) and EDTA (H4Y, H3Y-, H2Y2-, HY3-, and Y4-, Y = EDTA) species was used to explain the pH dependence of the k values. From the temperature effect on k at pH 5.4, 7.1, and 9.2, activation parameters, DeltaS(double dagger) and DeltaH(double dagger), were obtained for the reactions of Fe(VI) with EDTA. The values of DeltaS(double dagger) for the reactions were found to be negative, implying a highly ordered transition state in the reaction. The DeltaH(double dagger) for the reaction at pH 7.1 and 9.2 showed similar values within experimental error. Using the observed enthalpy parameters and the enthalpy of deprotonation of HFeO4- and EDTA species (HEDTA3- and H2EDTA2-), the enthalpy of deprotonation of H2FeO4 (DeltaH0H2FeO4) was determined as 5.7 +/- 3.0 kJ mol(-1). The reactivity of Fe(VI) with aminopolycarboxylates (APCs) was also studied in alkaline medium. The order of reactivity was determined as primary > secondary > tertiary, which suggests that FeVIO42- attacks at the nitrogen atom sites of APCs.