Dual-color upconversion fluorescence and aptamer-functionalized magnetic nanoparticles-based bioassay for the simultaneous detection of Salmonella Typhimurium and Staphylococcus aureus

A sensitive luminescent bioassay for the simultaneous detection of Salmonella Typhimurium and Staphylococcus aureus was developed using aptamer-conjugated magnetic nanoparticles (MNPs) for both recognition and concentration elements and using upconversion nanoparticles (UCNPs) as highly sensitive dual-color labels. The bioassay system was fabricated by immobilizing aptamer 1 and aptamer 2 onto the surface of MNPs, which were employed to capture and concentrate S. Typhimurium and S. aureus. NaY_0.78F₄:Yb_0.2,Tm_0.02 UCNPs modified aptamer 1 and NaY_0.28F₄:Yb_0.70,Er_0.02 UCNPs modified aptamer 2 further were bond onto the captured bacteria surface to form sandwich-type complexes. Under optimal conditions, the correlation between the concentration of S. Typhimurium and the luminescent signal was found to be linear within the range of 10¹–10⁵ cfu mL⁻¹ (R² = 0.9964), and the signal was in the range of 10¹–10⁵ cfu mL⁻¹ (R² = 0.9936) for S. aureus. The limits of detection of the developed method were found to be 5 and 8 cfu mL⁻¹ for S. Typhimurium and S. aureus, respectively. The ability of the bioassay to detect S. Typhimurium and S. aureus in real water samples was also investigated, and the results were compared to the experimental results from the plate-counting methods. Improved by the magnetic separation and concentration effect of MNPs, the high sensitivity of UCNPs, and the different emission lines of Yb/Er- and Yb/Tm-doped NaYF₄ UCNPs excited by a 980 nm laser, the present method performs with both high sensitivity and selectivity for the two different types of bacteria.     

Fluorescence detection of total count of Escherichia coli and Staphylococcus aureus on water-soluble CdSe quantum dots coupled with bacteria

The aim of this paper was to demonstrate a fluorescence measurement method for rapid detection of two bacterial count by using water-soluble quantum dots (QDs) as a fluorescence marker, and spectrofluorometer acted as detection apparatus, while Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) were as detection target bacteria. Highly luminescent water-soluble CdSe QDs were first prepared by using thioglycolic acid (TGA) as a ligand, and were then covalently coupled with target bacteria. The bacterial cell images were obtained using fluorescence microscopy. Our results showed that CdSe QDs prepared in water phase were highly luminescent, stable, and successfully conjugated with E. coli and S. aureus. The fluorescence method could detect 10²-10⁷ CFU/mL total count of E. coli and S. aureus in 1-2 h and the low detection limit is 10² CFU/mL. A linear relationship of the fluorescence peak intensity and log total count of E. coli and S. aureus have been established using the equation Y = 118.68X − 141.75 (r = 0.9907).     

Colorimetric detection of iron ions (III) based on the highly sensitive plasmonic response of the N-acetyl-l-cysteine-stabilized silver nanoparticles

We report here a facile colorimetric sensor based on the N-acetyl-l-cysteine (NALC)-stabilized Ag nanoparticles (NALC–Ag NPs) for detection of Fe³⁺ ions in aqueous solution. The Ag NPs with an average diameter of 6.55 ± 1.0 nm are successfully synthesized through a simple method using sodium borohydride as reducing agent and N-acetyl-l-cysteine as protecting ligand. The synthesized silver nanoparticles show a strong surface plasmon resonance (SPR) around 400 nm and the SPR intensity decreases with the increasing of Fe³⁺ concentration in aqueous solution. Based on the linear relationship between SPR intensity and concentration of Fe³⁺ ions, the as-synthesized water-soluble silver nanoparticles can be used for the sensitive and selective detection of Fe³⁺ ions in water with a linear range from 80 nM to 80 μM and a detection limit of 80 nM. On the basis of the experimental results, a new detection mechanism of oxidation–reduction reaction between Ag NPs and Fe³⁺ ions is proposed, which is different from previously reported mechanisms. Moreover, the NALC–Ag NPs could be applied to the detection of Fe³⁺ ions in real environmental water samples.     

Surface plasmon resonance immunosensor for bacteria detection

This work describes an approach for the development of two bacteria biosensors based on surface plasmon resonance (SPR) technique. The first biosensor was based on functionalized gold substrate and the second one on immobilized gold nanoparticles. For the first biosensor, the gold substrate was functionalized with acid-thiol using the self-assembled monolayer technique, while the second one was functionalized with gold nanoparticles immobilized on modified gold substrate. A polyclonal anti-Escherichia coli antibody was immobilized for specific (E. coli) and non-specific (Lactobacillus) bacteria detection. Detection limit with a good reproducibility of 10⁴ and 10³ cfu mL⁻¹ of E. coli bacteria has been obtained for the first biosensor and for the second one respectively. A refractive index variation below 5 × 10⁻³ due to bacteria adsorption is able to be detected. The refractive index of the multilayer structure and of the E. coli bacteria layer was estimated with a modeling software.     

A competitive immunoassay for sensitive detection of small molecules chloramphenicol based on luminol functionalized silver nanoprobe

Chloramphenicol (CHL) as a broad-spectrum antibiotic has a broad action spectrum against Gram-positive and Gram-negative bacteria, as well as anaerobes. The use of CHL is strictly restricted in poultry because of its toxic effect. However, CHL is still illegally used in animal farming because of its accessibility and low cost. Therefore, sensitive methods are highly desired for the determination of CHL in foodstuffs. The immunoassays based on labeling as an important tool have been reported for the detection of CHL residues in food-producing animals. However, most of the labeling procedures require multi-step reactions and purifications and thus they are complicated and time-consuming. Recently, in our previous work, luminol functionalized silver nanoparticles have been successfully synthesized, which exhibits higher CL efficiency than luminol functionalized gold nanoparticles. In this work, the new luminol functionalized silver nanoparticles have been used for the labeling of small molecules CHL for the first time and a competitive chemiluminescent immunoassay has been developed for the detection of CHL. Owing to the amplification of silver nanoparticles, high sensitivity for CHL could be achieved with a low detection limit of 7.6 × 10⁻⁹ g mL⁻¹ and a wide linear dynamic range of 1.0 × 10⁻⁸–1.0 × 10⁻⁶ g mL⁻¹. This method has also been successfully applied to determine CHL in milk and honey samples with a good recoveries (92% and 102%, 99% and 107% respectively), indicating that the method is feasible for the determination of CHL in real milk and honey samples. The labeling procedure is simple, convenient and fast, superior to previously reported labeling procedures. The immunoassay is also simple, fast, sensitive and selective. It is of application potential for the determination of CHL in foodstuffs.     

Electrochemical immunosensor designs for the determination of Staphylococcus aureus using 3,3-dithiodipropionic acid di(N-succinimidyl ester)-modified gold electrodes

The preparation of novel Staphylococcus aureus (S. aureus) amperometric immunosensing designs based on the covalent immobilization of RbIgG at gold electrodes using the heterobifunctional cross-linker 3,3-dithiodipropionic acid di(N-succinimidyl ester) (DTSP), are reported. Two different competitive immunosensing configurations have been tested and compared. In the first one, protein A-bearing S. aureus cells and HRP-labelled antiRbIgG compete for immobilized RbIgG binding sites, while in the second case HRP-labelled protein A was used. In both cases, the evaluation of the developed immunosensors performance was accomplished through the monitoring at 0.00 V (vs. Ag/AgCl) of the catalytic current originated after addition of hydrogen peroxide, using tetrathiafulvalene as redox mediator entrapped at the modified electrode surface by cross-linking with glutaraldehyde. Optimization of variables concerning the composition of the immunosensors as well as the detection conditions was carried out in 0.1 M NaAc/0.1 M NaCl buffer of pH 5.6. The configuration that employed antiRbIgG-HRP resulted in better analytical characteristics, with a detection limit of 1.4 × 10⁴ cells mL⁻¹ for S. aureus cells submitted to wall lyses by ultrasonic treatment. This immunosensor design was also evaluated using gold screen-printed electrodes in order to reduce the analysis time and cost. In this case, a limit of detection of 3.7 × 10² cells mL⁻¹ and a dynamic range from 1.3 × 10³ to 7.6 × 10⁴ cells mL⁻¹ was obtained. A RSD value of 10.5% was found for the responses to 9.6 × 10³S. aureus cells mL⁻¹ obtained with seven different Au/SPEs-immunosensors. These disposable immunosensors were applied to the quantification of S. aureus in milk spiked at two concentration levels, 1.2 × 10³ and 4.8 × 10³ cells mL⁻¹, with good recoveries.     

Synthesis and characterization of silver nanowires with zigzag morphology in N,N-dimethylformamide

Zigzag silver nanowires with a uniform diameter of 20±5 nm were prepared by reducing silver nitrate (AgNO₃) with N,N-dimethylformamide (DMF) in the presence of tetrabutyl titanate (TBT) and acetylacetone (AcAc) at 373 K for 18 h. X-ray and selected area electron diffraction (XRD and SAED) patterns reveal that the prepared product is made of pure silver with face centered cubic structure. Transmission electron microscopy (TEM) investigations suggest that the amount of silver nanowires is enhanced with increase in reaction time, and the end-to-end assemblies of silver nanorods are observed during the reaction process. After 18 h reaction, silver nanowires with zigzag morphology are obtained. In this paper, a possible growth process of silver nanowires with this interesting shape is described. Silver nanoparticles with small sizes were obtained by reducing Ag⁺ ions with DMF, providing seeds for homogeneous growth of silver nanorods. With the extending reaction time, the synthesized silver nanorods were connected in an end-to-end manner, and the interface between the connections of two nanorods gradually disappeared. The final product shows zigzag morphology with various angles. The angles between two connecting straight parts of zigzag nanowires exhibit an alterable range of 74-151°. These silver nanowires show tremendous potential applications in future nanoscale electronic circuits.     

Derivatized silver nanoparticles as sensor for ultra-trace nitrate determination based on light scattering phenomenon

New silver nanoparticles coated with EDTA (EDTA-AgNPs) have been synthesized by citrate reduction method and characterized by UV-vis spectroscopy, molecular fluorescence and scanning electron microscopy (SEM). The derivatized nanoparticles show fluorescent emission and second order scattering (SOS) signals which in presence of nitrate are both attenuated. The SOS decreasing is greater than its fluorescent quenching; considering this fact, a new ultra sensitive methodology using the derivatized silver nanoparticles as sensor for nitrate determination has been developed. Under optimal established conditions, a linear response has been obtained within the range of 6.4 × 10⁻⁴ to 3.0 μg mL⁻¹ nitrate concentrations, with a detection limit of 1.8 × 10⁻⁴ μg mL⁻¹. This novel technique provides a sensitive and selective methodology for nitrate determination and has been satisfactorily applied to its quantification in parenteral solutions.     

Ultrasensitive determination of silver ion based on synchronous fluorescence spectroscopy with nanoparticles

Based on the characteristics of synchronous fluorescence spectroscopy (SFS), a new method with high sensitivity and selectivity was developed for rapid determination of silver ion with functional cadmium sulphide (CdS) nanoparticles as a fluorescence probe. When Δλ (λ_em − λ_ex) = 215 nm, maximum synchronous fluorescence is produced at 304 nm. Under optimal conditions, functional cadmium sulphide displayed a calibration response for silver ion over a wide concentration range from 0.8 × 10⁻¹⁰ to 1.5 × 10⁻⁸ mol L⁻¹. The limit of detection was 0.4 × 10⁻¹⁰ mol L⁻¹ and the relative standard deviation of seven replicate measurements for the lowest concentration (0.8 × 10⁻¹⁰ mol L⁻¹) was 2.8%. Compared with several fluorescence methods, the proposed method had a wider linear range and improved the sensitivity. Furthermore, the concentration dependence of the synchronous fluorescence intensity is effectively described by a Langmuir-type binding isotherm.     

Localized surface plasmon resonance sensor for simultaneous kinetic determination of peroxyacetic acid and hydrogen peroxide

A new sensor for simultaneous determination of peroxyacetic acid and hydrogen peroxide using silver nanoparticles (Ag-NPs) as a chromogenic reagent is introduced. The silver nanoparticles have the catalytic ability for the decomposition of peroxyacetic acid and hydrogen peroxide; then the decomposition of them induces the degradation of silver nanoparticles. Hence, a remarkable change in the localized surface plasmon resonance absorbance strength could be observed. Spectra-kinetic approach and artificial neural network was applied for the simultaneous determination of peroxyacetic acid and hydrogen peroxide. Linear calibration graphs were obtained in the concentration range of (8.20 × 10⁻⁵ to 2.00 × 10⁻³ mol L⁻¹) for peroxyacetic acid and (2.00 × 10⁻⁵ to 4.80 × 10⁻³ mol L⁻¹) for hydrogen peroxide. The analytical performance of this sensor has been evaluated for the detection of simultaneous determination of peroxyacetic acid and hydrogen peroxide in real samples.     

Structural and morphological properties of silver nanoparticles–phosphate glass composites

New types of composite materials belonging to the (100 − x) [50P₂O₅ · 30CaO · 20Na₂O]xAg₂O glasses system with 0 ? x ? 0.25 are obtained. Their local structure is analyzed with the help of Raman and infrared spectroscopy and it was found that the glasses structure is built up from predominantly ionic phosphate units. UV–VIS absorption measurements performed on the samples reveal the existence of silver nanoparticles within the soda–calcium-phosphate glass matrix. The electronic absorption spectra and TEM pictures analyses indicate the presence of silver nanoparticles of almost spherical shapes and various sizes inside the glass matrix, depending on the Ag₂O content. By using the experimental UV–VIS data and a theoretical approach important structural and morphological parameters, such as the radius of the silver nanospheres and the volume fraction of the spheres are determined for one of the investigated composites (x = 0.05 mol%).     

Photoelectrochemical studies of ionic liquid-containing solar cells sensitized with different polypyridyl–ruthenium complexes

The efficiency of dye-sensitized nanocrystalline solar cells containing ionic liquids, composed of organic sulfonium or imidazolium iodides, or a standard organic-liquid-based electrolyte was studied, while using sensitizers based on different polypyridyl–ruthenium complexes. The dyes N-719, [cis-Ru(II)(H₂dcbpy)₂(NCS)₂(TBA)₂] and Z-907, [cis-Ru(II)(H₂dcbpy)(dnbpy)(NCS)₂, Z-907 having a more hydrophobic character, as well as a bidentate β-diketonato complex, [(dcbpy)₂Ru(acetylacetonate)]Cl⁻, was studied. Solar cells sensitized with the dye N-719 were more efficient than the Z-907 cells, for all electrolytes studied. Adding a co-adsorbent, the amphiphilic hexadecylmalonic acid (HDMA), to Z-907 solar cells containing an organic-liquid electrolyte resulted in increased overall light-to-electricity conversion efficiencies, from 3.7% to 4.0%, (100 W m⁻², AM 1.5). Possibly, this is caused by an insulating hydrophobic barrier formed to suppress unwanted electron losses. By applying TiO₂ (P25) nanoparticles, assumed to support electron transfer reactions, to the organic-liquid electrolyte, the conversion efficiency was increased from 4.1% to 4.6% (100 W m⁻², AM 1.5). In 1000 W m⁻² illumination, the highest overall short-circuit current density, 9.3 mA cm⁻², was achieved with the N-719 sensitized cells, with the TiO₂ nanocomposite-containing organic-liquid-based electrolyte. For solar cells sensitized with N-719, Z-907 or the β-diketonato complex, and containing imidazolium or sulfonium iodide ionic liquids, no improvements of the overall conversion efficiency could be noticed at addition of HDMA to the dye or nanoparticles to the electrolyte.     

A newly developed immunoassay method based on optical measurement for Protein A detection

We describe the development of an immunoassay using an antibody-silver nanoparticle (Ab-AgNP) conjugate as a catalyst for the silver enhancement reaction. The immuno-reaction signals that were magnified by silver metal precipitation were quantified using a commercial flatbed scanner. Protein A from Staphylococcus aureus (S. aureus), a common clinical pathogenic bacterium, was used in this research. The ease of infection of S. aureus necessitates the development of a fast detection method. The framework of the method described in this paper is based on the sandwich immunoassay and contains a 1st antibody (immunoglobulin G, IgG), an antigen (Protein A), and a 2nd antibody-colloidal silver conjugate (IgG-AgNPs). The silver enhancement reaction, a signal amplification method in which silver ions are reduced to metallic silver, is used to magnify the immuno-reaction signal. The change in signal, as visualized in grayscale, can be easily observed and analyzed by our optical scanning detection system. The relationship between antigen concentration and grayscale value is discussed. The detectable concentration limit for the antigen was found to be 1 ng/mL with 10 μg/mL of IgG and 300 μM of the IgG-AgNP conjugate. This immunoassay method provides the advantages of low cost, easy operation, and short detection time. Moreover, it has potential applications in clinical diagnoses.     

A novel fluorescence sensor based on covalent immobilization of 3-amino-9-ethylcarbazole by using silver nanoparticles as bridges and carriers

A novel technique of covalent immobilization of indicator dyes in the preparation of fluorescence sensors is developed. Silver nanoparticles are used as bridges and carriers for anchoring indicator dyes. 3-amino-9-ethylcarbazole (AEC) was employed as an example of indicator dyes with terminal amino groups and covalently immobilized onto the outmost surface of a quartz glass slide. First, the glass slide was functionalized by (3-mercaptopropyl) trimethoxysilane (MPS) to form a thiol-terminated self-assembled monolayer, where silver nanoparticles were strongly bound to the surface through covalent bonding. Then, 16-mercaptohexadecanoic acid (MHDA) was self-assembled to bring carboxylic groups onto the surface of silver nanoparticles. A further activation by using 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDC) and N-hydroxysuccinimide (NHS) converted the carboxylic groups into succinimide esters. Finally, the active succinimide esters on the surface of silver nanoparticles were reacted with AEC. Thus, AEC was covalently bound to the glass slide and an AEC-immobilized sensor was obtained. The sensor exhibited very satisfactory reproducibility and reversibility, rapid response and no dye-leaching. Rutin can quench the fluorescence intensity of the sensor and be measured by using the sensor. The linear response of the sensor to rutin covers the range from 2.0 × 10⁻⁶ to 1.5 × 10⁻⁴ mol L⁻¹ with a detection limit of 8.0 × 10⁻⁷ mol L⁻¹. The proposed technique may be feasible to the covalent immobilization of other dyes with primary amino groups.     

Effect of the polarity of silver nanoparticles induced by ionic liquids on facilitated transport for the separation of propylene/propane mixtures

The effect of ionic liquids on the formation of a partial positive charge on the surface of silver nanoparticle and its subsequent effect on facilitated olefin transport were investigated. Three different ionic liquids of 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM⁺BF₄⁻), 1-butyl-3-methylimidazolium triflate (BMIM⁺Tf⁻), and 1-butyl-3-methylimidazolium nitrate (BMIM⁺NO₃⁻) were employed to control the positive charge density of the surface of silver nanoparticles. The positive charge density of the silver nanoparticles, as characterized by the binding energy of the silver atom, was in the following order: BMIM⁺BF₄⁻/Ag ? BMIM⁺Tf⁻/Ag > BMIM⁺NO₃⁻/Ag. This order was consistent with the tendency of ionic liquids to form free ions. The best separation performance for the propylene/propane mixtures was a mixed gas selectivity of 17 and a permeance of 7 GPU through a composite membrane consisting of BMIM⁺BF₄⁻/Ag. A better separation performance for olefin/paraffin mixtures was observed with a higher positive charge density of the silver nanoparticles. It was therefore concluded that facilitated olefin transport was a direct consequence of the surface positive charge of the silver nanoparticles induced by ionic liquids.     

Study of the influence of silver nanoparticles on the second-order scattering and the fluorescence of the complexes of Tb(III) with quinolones and determination of the quinolones

Quinolones (Qs) can form the complex with Tb(III) ion, and the intramolecular energy transfer from Qs to Tb(III) takes place when excited. And thus the characteristic fluorescence of Tb(III) ion was enhanced and the maximum fluorescence peak locates at 545 nm. The second-order scattering (SOS) peak at 545 nm also appears for the Tb(III)-Qs complexes with the exciting wavelength of 274 nm. When the silver nanoparticles were added to the Tb(III)-Qs system, the luminescence intensity at 545 nm greatly increased. And the relative intensity is proportional to the amount of Qs. Based on this phenomenon, a novel method for determination of quinolones has been developed by using a common spectrofluorometer to measure the intensity of fluorescence and SOS. The luminescence intensity is greatly enhanced by silver nanoparticles in the pH range 5.5-6.2. The calibration graphs for pipemidic acid (PPA) and lomefloxacin (LMFX) are linear in the range 2.0 × 10⁻¹⁰ to 1.0 × 10⁻⁵ and 1.0 × 10⁻⁹ to 1.0 × 10⁻⁵ mol L⁻¹, respectively. The limits of detection are 4.7 × 10⁻¹¹ mol L⁻¹ for PPA and 1.1 × 10⁻¹⁰ mol L⁻¹ for LMFX. The method was applied satisfactorily to the determination of the two quinolones (Qs) in tablet, capsule, urine and serum samples. The experimental results showed that it is the certain size and certain concentration of silver nanoparticles that can greatly enhance the fluorescence -SOS intensity.     

A method to detect metal–drug complexes and their interactions with pathogenic bacteria via graphene nanosheet assist laser desorption/ionization mass spectrometry and biosensors

A new method was proposed to probe the interactions between transition metals of Fe(II), Fe(III), Cu(II) with a non steroidal anti-inflammatory drug (NSAID), flufenamic acid (FF) using graphene as a matrix for Graphene assisted laser desorption ionization mass spectrometry (GALDI-MS). Metal–drug complexation was confirmed via UV absorption spectroscopy, fluorescence spectroscopy, pH meter, and change in solution conductivity. The optimal molar ratios for these complexation interactions are stoichiometry 1:2 in both Cu(II) and Fe(II) complexes, and 1:3 in Fe(III) complexes at physiological pH (7.4). Metal complexation of the drug could enhance fluorescence for 20 fold which is due to the charge transfer reaction or increase rigidity of the drug. The main interaction between graphene and flufenamic acid is the П–П interaction which allows us to probe the metal–drug complexation. The GALDI-MS could sensitively detect the drug at m/z 281.0 Da (protonated molecule) with detection limit 2.5 pmol (1.0 μM) and complexation at m/z 661.0, 654.0 and 933.0 Da corresponding to [Cu(II)(FF)₂(H₂O)₂ + H]⁺, [Fe(II)(FF)₂(H₂O)₂ + H]⁺ and [Fe(III) (FF)₃(H₂O)₂ + H]⁺, respectively (with limit of detection (LOD) 2.0 pmol (10.0 μM). Matrix assisted laser desorption ionization mass spectrometry (MALDI-MS) spectra show change in the protein profile of intact pathogenic bacteria (Pseudomonas aeroginosa, Staphylococcus aureus). The change in the ionization ability (mainly proton affinity) of pathogenic bacteria may be due to the interactions between the bacteria with the drug (or its complexes). Shielding carboxylic group by metals and increase the hydrophilicity could enhance the biocompatibility of complexes toward the pathogenic bacteria which can be used as biosensors with high sensitivity and lowest detectable concentrations are in the range of 3.3 × 10³–3.9 × 10⁴ cfu mL⁻¹ with large linear dynamic range.     

Light scattering sensing detection of pathogens based on the molecular recognition of immunoglobulin with cell wall-associated protein A

In this contribution, we report a rapid optical detection method of pathogens using Staphylococcus aureus (S. aureus) as the model analyte based on the molecular recognition of immunoglobulin with cell wall-associated Protein A (SpA). It was found that the molecular recognition of human immunoglobulin (IgG) with protein A on the cell wall of S. aureus on glass slide sensing area could result in strong surface enhanced light scattering (SELS) signals, and the SELS intensity (ΔI) increases proportionally with the concentration of S. aureus over the range of 2.5 × 10⁵-1.0 × 10⁸ CFU mL⁻¹ with right angle light scattering (RALS) signals detection mode. In order to identify the solid support based molecular recognition between IgG with SpA, we also employed water-soluble CdS quantum dots (CdS-QDs) as a fluorescent marker for IgG by immobilizing the IgG onto the surfaces of CdS-QDs through covalent binding in order to generate recognition probes for SpA on the cell wall of S. aureus. Consequently, the fluorescent method also showed that the detection for pathogens with solid supports is reliable based on the molecular recognition of IgG with SpA.     

Facile synthesis of PbTe nanoparticles and thin films in alkaline aqueous solution at room temperature

A novel, simple, and cost-effective route to PbTe nanoparticles and films is reported in this paper. The PbTe nanoparticles and films are fabricated by a chemical bath method, at room temperature and ambient pressure, using conventional chemicals as starting materials. The average grain size of the nanoparticles collected at the bottom of the bath is ∼25 nm. The film deposited on glass substrate is dense, smooth, and uniform with silver gray metallic luster. The film exhibits p-type conduction and has a moderate Seebeck coefficient value (∼147 μV K⁻¹) and low electrical conductivity (∼0.017 S cm⁻¹). The formation mechanism of the PbTe nanoparticles and films is proposed.     

Bio-based thermostable, biodegradable and biocompatible hyperbranched polyurethane/Ag nanocomposites with antimicrobial activity

The enhanced thermal and antimicrobial activity of silver nanoparticles prompts their uses in many medical devices. Mesua ferrea L. seed oil based antimicrobial biocompatible hyperbranched and linear polyurethane/Ag nanocomposites have been prepared in dimethylformamide without using any extra reducing agent. Formation of the stable and well-dispersed Ag nanoparticles was confirmed by ultra violet, X-ray diffractometeric, transmission electron microscopic and Fourier transform infra-red spectroscopic analyses. The enhancement of properties like thermal stability by (46-53)°C and 42 °C, tensile strength to ∼170% and ∼180% for hyperbranched and linear polyurethanes respectively was observed by the formation of nanocomposites. The cytocompatibility test based on the inhibition of RBC hemolysis showed that the materials lack cytotoxicity. The nanocomposites showed biodegradability as conferred from the bacterial degradation. Dose dependent excellent antibacterial activity of the nanocomposites against Gram positive (Staphylococcus aureus) and Gram negative (Escherichia coli) bacteria and antifouling activity against Candida albicans was observed.