Impurity profiling of acetylspiramycin by liquid chromatography–ion trap mass spectrometry

Investigation of acetylspiramycin (ASPM) and its related substances was carried out using a reversed-phase liquid chromatography/tandem mass spectrometry method. The identification of impurities in the ASPM complex was performed with a quadrupole ion trap mass spectrometer, with an electrospray ionization (ESI) source in the positive ion mode which provides MSⁿ capability. A total of 83 compounds were characterized in commercial samples, among which 31 impurities that had never been reported and 31 partially characterized impurities were deduced using the collision-induced dissociation (CID) spectra of major ASPM components as templates. Most of the major impurities arise from the starting materials and the synthesis process. This work provides very useful information for quality control of ASPM and evaluation of its synthesis process.     

Rapid analysis of aflatoxin M1 in milk using dispersive liquid–liquid microextraction coupled with ultrahigh pressure liquid chromatography tandem mass spectrometry

A simple, rapid, and sensitive method based on simultaneous protein precipitation and extraction of aflatoxin M₁ (AFM₁) followed by dispersive liquid–liquid microextraction (DLLME) and ultrahigh pressure liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) analysis was developed for the determination of AFM₁ in milk samples. In order to precipitate the proteins and extract AFM₁ from milk, a sample pretreatment using acetonitrile and NaCl as the extraction/denaturant solvent and salting-out agent, respectively, was optimised. Subsequently, the acetonitrile (upper) phase, containing AFM₁, was used as the disperser solvent in DLLME, and extractant (chloroform) and water were added in turn to the extract to perform the DLLME process. The main parameters affecting the extraction efficiency of the whole analytical procedure, such as acetonitrile volume, amount of salt, type and volume of extractant and water volume, were carefully optimised by experimental design. Under optimum conditions, the developed method provides an enrichment factor of 33 and detection and quantification limits (0.6 and 2.0 ng kg^?1, respectively) below the maximum levels imposed by current regulations for AFM₁ in milk and infant milk formulae. Recoveries (61.3–75.3 %) and repeatability (RSD?<?10, n?=?3), tested in different types of milk at four AFM₁ levels, met the performance criteria required by EC Regulation No. 401/2006. Moreover, the matrix effect on the signal intensity of the analyte was negligible. The proposed method provides a rapid extraction and an accurate determination of AFM₁ in milk and formula milk using a simple and inexpensive sample preparation procedure.

Screening of pesticides in blood with liquid chromatography–linear ion trap mass spectrometry

In clinical or forensic toxicology, general unknown screening procedures are used to identify as many xenobiotics as possible, belonging to numerous chemical classes. We present here a general unknown screening procedure based on liquid chromatography coupled with use of a single linear ion trap mass spectrometer, and focus on the identification of pesticides and/or metabolites in whole blood. After solid-phase extraction (SPE), the compounds of interest were separated using a reversed-phase column and identified by the mass spectrometer operated first in the full-scan mass spectrometry (MS) mode, in the positive and negative polarities, followed by MS² and MS³ scanning of ions selected in data-dependent acquisition. The total scan time was 2.45 s. Two mass spectral libraries (MS² and MS³), each of 450 spectra, were created for the 320 pesticides and metabolites detected after injection of pure solutions. Robustness of the spectra and matrix effects were studied and were satisfactory for the present application. Detection limits for the 320 compounds were studied by extracting 1 mL spiked blood at concentrations between 10 μg/L and 10 mg/L. If necessary, it was possible to decrease the detection limits of some compounds by 10–100-fold by scanning MS² in only one polarity, owing to a shorter total scan time. However, at the same time, the detection specificity decreased as no confirmation could be recorded in the following MS³ scan and no information could be registered in the other polarity. So, in these rare cases, confirmation by another method was required.     

Pharmaceutical trace analysis in aqueous environmental matrices by liquid chromatography–ion trap tandem mass spectrometry

An analytical method based on solid-phase extraction followed by liquid chromatography tandem mass spectrometry with an ion trap analyser was developed and validated for the quantification of a series of pharmaceutical compounds with distinct physical–chemical characteristics in estuarine water samples. Method detection limits were between 0.03 and 16.4 ng/L. The sensitivity and the accuracy obtained associated with the inherent confirmatory potential of ion trap tandem mass spectrometry (IT-MS/MS) validates its success as an environmental analysis tool. Two MS/MS transitions were used to confirm compound identity. Almost all pharmaceuticals were detected at ng/L level in at least one sampling site of the Douro River estuary, Portugal.     

Determination of phthalate esters in edible oils by use of QuEChERS coupled with ionic-liquid-based dispersive liquid–liquid microextraction before high-performance liquid chromatography

A selective and low organic-solvent-consuming method of sample preparation combined with high-performance liquid chromatography with diode-array detection is introduced for analysis of phthalic acid esters in edible oils. Sample treatment involves initial liquid–liquid partitioning with acetonitrile, then QuEChERS cleanup by dispersive solid-phase extraction with primary secondary amine as sorbent. Preconcentration of the analytes is performed by ionic-liquid-based dispersive liquid–liquid microextraction, with the cleaned-up extract as disperser solvent and 1-hexyl-3-methylimidazolium hexafluorophosphate as extraction solvent. Under the optimized conditions, correlation coefficients (r) were 0.998–0.999 and standard errors (S _y/x ) were 2.67–3.37?×?10³ for calibration curves in the range 50–1000 ng g^?1. Detection limits, at a signal-to-noise ratio of 3, ranged from 6 to 9 ng g^?1. Intra-day and inter-day repeatability, expressed as relative standard deviation, were in the ranges 1.0–6.9 % and 2.4–9.4 %, respectively. Recovery varied between 84 % and 106 %. The developed method was successfully used for analysis of the analytes in 28 edible oils. The dibutyl phthalate content of four of the 28 samples (14 %) exceeded the specific migration limit established by domestic and international regulations.

Fingerprinting and source identification of an oil spill in China Bohai Sea by gas chromatography-flame ionization detection and gas chromatography–mass spectrometry coupled with multi-statistical analyses

This paper describes a case study in which advanced chemical fingerprinting and data interpretation techniques were used to characterize the chemical composition and determine the source of an unknown spilled oil reported on the beach of China Bohai Sea in 2005. The spilled oil was suspected to be released from nearby platforms. In response to this specific site investigation need, a tiered analytical approach using gas chromatography–mass spectrometry (GC–MS) and gas chromatography-flame ionization detection (GC-FID) was applied. A variety of diagnostic ratios of “source-specific marker” compounds, in particular isomers of biomarkers, were determined and compared. Several statistical data correlation analysis methods were applied, including clustering analysis and Student's t-test method. The comparison of the two methods was conducted. The comprehensive analysis results reveal the following: (1) The oil fingerprinting of three spilled oil samples (S1, S2 and S3) positively match each other; (2) The three spilled oil samples have suffered different weathering, dominated by evaporation with decrease of the low-molecular—mass n-alkanes at different degrees; (3) The oil fingerprinting profiles of the three spilled oil samples are positive match with that of the suspected source oil samples C41, C42, C43, C44 and C45; (4) There are significant differences in the oil fingerprinting profiles between the three spilled oil samples and the suspected source oil samples A1, B1, B2, B3, B4, C1, C2, C3, C5 and C6.     

Determination of synthetic musk compounds in indoor house dust by gas chromatography–ion trap mass spectrometry

A new method for the simultaneous determination of 11 synthetic musks and one fragrance compound in house dust was developed. The nitro musks included musk ketone (MK, 4-tert-butyl-3,5-dinitro-2,6-dimethylacetophenone), musk xylene (MX, 1-tert-butyl-3,5-dimethyl-2,4,6-trinitrobenzene), musk ambrette (1-tert-butyl-2-methoxy-4-methyl-3,5-dinitrobenzene) and musk moskene (1,1,3,3,5-pentamethyl-4,6-dinitroindane). The polycyclic musk compounds were 1,3,4,6,7,8-hexahydro-4,6,6,7,8,8-hexamethylcyclopenta-(γ)-2-benzopyran (HHCB), 7-acetyl-1,1,3,4,4,6-hexamethyl-1,2,3,4-tetrahydronaphthalene (AHTN), 4-acetyl-1,1-dimethyl-6-tert-butylindane, 6-acetyl-1,1,2,3,3,5-hexamethylindane, 5-acetyl-1,1,2,6-tetramethyl-3-isopropylindane, 6,7-dihydro-1,1,2,3,3-pentamethyl-4(5H)-indanon. The one macrocyclic musk was 1,4-dioxacycloheptadecane-5,17-dione. The bicyclic hydrocarbon fragrance compound (1,2,3,4,5,6,7,8-octahydro-2,3,8,8-tetramethylnaphthalen-2yl)ethan-1-one (OTNE) and HHCB-lactone (4,6,6,7,8,8-hexamethyl-1H,3H,4H,6H,7H, 8H-indeno[5,6-c]pyran-1-one), a degradation product of HHCB, were also analysed. NIST SRM 2781 (domestic sludge) and SRM 2585 (organic contaminants in house dust) were analysed for these target compounds. The method was applied for the analysis of 49 paired samples collected using two vacuum sampling methods: a sample of fresh or "active" dust (FD) collected using a Pullman-Holt vacuum sampler, and a household dust (HD) sample taken from the participants' vacuum cleaners. Method detection limits and recoveries ranged from 12 to 48?ng/g and 54 to 117?%, respectively. AHTN, HHCB, OTNE and HHCB-lactone were detected in all samples, with median concentrations of 552, 676, 252 and 453?ng/g for FD samples, respectively; and 405, 992, 212 and 492?ng/g for HD samples, respectively. MX and MK were detected with high frequencies but with much lower concentrations. The two sampling methods produced comparable results for the target analytes. Widely scattered concentration levels were observed for target analytes from this set of 49 house dust samples, suggesting a wide variability in Canadian household exposure to synthetic musks.     

Rapid determination of amide herbicides in environmental water samples with dispersive liquid–liquid microextraction prior to gas chromatography–mass spectrometry

This paper describes a novel, simple and environmentally friendly method for rapid determination of the amide herbicides metoalchlor, acetochlor, and butachlor. It is based on dispersive liquid-liquid microextraction and gas chromatography–mass spectrometry. Factors that may influence the enrichment efficiency, such as type and volume of extraction solvent, type and volume of dispersive solvent, extraction time, and content of NaCl, were investigated and optimized in detail. Under the optimum conditions, the limits of detection of metoalchlor, acetochlor, and butachlor were 0.02, 0.04, and 0.003 μg L⁻¹, respectively. The experimental results indicated that there was linearity over the range 0.1–50 μg L⁻¹ and good reproducibility with relative standard deviations over the range 1.6–3.0% (n = 5). The proposed method has been applied for the analysis of real-world water samples, and satisfactory results were achieved. Average recoveries of spiked herbicides were in the range 80.3–108.8%. All of these indicated that the developed method would be an efficient method for simultaneous determination of the three herbicides in environmental water samples.     

Identification and quantification of glucosinolates in rapeseed using liquid chromatography–ion trap mass spectrometry

A rapid and sensitive method for the speciation and quantification of glucosinolates in rapeseed is described. The method combines liquid chromatography (LC) with ion trap mass spectrometry (ITMS) detection. Electrospray ionization (ESI) has been chosen as the ionization technique for the on-line coupling of LC with ITMS. Glucosinolates are extracted from different rapeseeds with MeOH and the extracts are cleaned-up by solid phase extraction with Florisil cartridges. Aqueous extracts are injected into LC system coupled to an ITMS, leading to accurately quantify eight of the most important glucosinolates in rapeseed, by MS² mode and confirming their structure by MS³ acquisition. All the glucosinolates found in rapeseeds provide good signals corresponding to the deprotonated precursor ion [M-H]⁻. The method is reliable and reproducible, and detection limits range from 0.5 nmol g⁻¹ to 3.7 nmol g⁻¹ when 200 mg of dried seeds of certified reference material are analyzed. Within-day and between-day RSD percentages range between 2.4–14.1% and 3.9–16.9%, respectively. The LC-ESI-ITMS-MS method described here allows for a rapid assessment of these metabolites in rapeseed without a desulfatation step. The overall process has been successfully applied to identify and quantify glucosinolates in rapeseed samples.     

Characterization of metabolites of sibutramine in primary cultures of rat hepatocytes by liquid chromatography–ion trap mass spectrometry

Liquid chromatography–ion trap mass spectrometry was used for the detection and structural characterization of metabolites of the anti-obesity drug sibutramine. Metabolites were profiled from incubations of sibutramine in primary cultures of rat hepatocytes. In addition, enantioselectivity of sibutramine metabolism was investigated by carrying out separate incubations with (R)- and (S)-sibutramine. As a result, biotransformation profile for sibutramine with rat hepatocytes is proposed. Nineteen metabolites and several of their isomers formed via demethylation, hydroxylation, dehydrogenation, acetylation, attachment of CO₂, and glucuronidation were identified in MS² and MS³ experiments, though the exact position of the functionality, mostly hydroxylation, could not always be determined from the mass spectrometric information. However, clear enantioselective formation was observed for two hydroxyl derivatives and two glucuronide conjugates, indicating that the hydroxyl/glucuronic acid moiety in those structures is close to the chiral center. Most of the metabolites found in this study are new metabolites of sibutramine, which were not previously reported.     

Rapid determination of pyridine derivatives by dispersive liquid–liquid microextraction coupled with gas chromatography/gas sensor based on nanostructured conducting polypyrrole

Polypyrrole (PPy) gas sensor has been prepared by polymerization of pyrrole on surfaces of commercial polymer fibers in the presence of an oxidizing agent. The sensing behavior of PPy gas sensor was investigated in the presence of pyridine derivatives. The resistive responses of the PPy gas sensor to pyridine derivatives were in the order of quinoline > pyridine > 4-methyl pyridine and 2-methyl pyridine. The PPy gas sensor was used as gas chromatography (GC) detector and exhibited linear responses to pyridine derivatives in the ranges 40–4000 ng. Dispersive liquid–liquid microextraction (DLLME) combined with GC/PPy gas sensor has been developed for simultaneous determination of pyridine derivatives and quinoline. The purposed method was used for determination of pyridine derivatives from cigarette smoke. The GC runs were completed in 4 min. The reproducibility of this method is suitable and good standard deviations were obtained. RSD value is less than 10% for all analytes.     

Elucidation of n-butyl benzyl phthalate biodegradation using high-performance liquid chromatography and gas chromatography–mass spectrometry

n-Butyl benzyl phthalate (BBP) is an endocrine-disrupting chemical. A bacterium species capable of using BBP as the sole source of carbon and energy was isolated from mangrove sediment. Effects of BBP concentration, pH, temperature, and salinity on BBP biodegradation were studied. The optimum pH, temperature, and salinity for the BBP biodegradation were 7.0, 37°C, and 15 g L⁻¹, respectively. BBP was completely degraded within 6 days under optimum conditions, and the biodegradation of BBP could be fitted to a first-order kinetic model. The major metabolites of BBP biodegradation were identified as mono-butyl phthalate, mono-benzyl phthalate, phthalic acid, and benzoic acid by using high-performance liquid chromatography and gas chromatography–mass spectrometry. A preliminary metabolic pathway was proposed for the biodegradation of BBP.      

Determination of hydroxylated benzophenone UV filters in sea water samples by dispersive liquid–liquid microextraction followed by gas chromatography–mass spectrometry

A new analytical method for the determination of four hydroxylated benzophenone UV filters (i.e. 2-hydroxy-4-methoxybenzophenone (HMB), 2,4-dihydroxybenzophenone (DHB), 2,2′-dihydroxy-4-methoxybenzophenone (DHMB) and 2,3,4-trihydroxybenzophenone (THB)) in sea water samples is presented. The method is based on dispersive liquid–liquid microextraction (DLLME) followed by gas chromatography–mass spectrometry (GC–MS) determination. The variables involved in the DLLME process were studied. Under optimized conditions, 1000 μL of acetone (disperser solvent) containing 60 μL of chloroform (extraction solvent) were injected into 5 mL of aqueous sample adjusted to pH 4 and containing 10% NaCl. Before injecting into the GC–MS system, the DLLME extracts were evaporated under an air stream and then reconstituted with N,O-bis-(trimethylsilyl)trifluoroacetamide (BSTFA), thus allowing the target analytes to be converted into their trimethylsilyl derivatives. The best conditions for the derivatization reaction were 75 °C and 30 min. High enrichment factors for all the target analytes (ranging from 58 to 64) and good repeatability (RSD around 6%) were obtained. The limits of detection were in the range of 32–50 ng L⁻¹, depending on the analyte. The recoveries obtained by using the proposed DLLME–GC–MS method evidenced the presence of matrix effects for some of the target analytes, and thereby the standard addition calibration method was employed. Finally, the validated method was applied to the analysis of sea water samples.     

Fast analysis of multiple pesticide residues in apple juice using dispersive liquid–liquid microextraction and multidimensional gas chromatography–mass spectrometry

A method for the rapid trace analysis of 24 residual pesticides in apple juice by multidimensional gas chromatography–mass spectrometry (MD-GC/MS) using dispersive liquid–liquid microextraction (DLLME) was developed and optimized. Several parameters of the extraction procedure such as type and volume of extraction solvent, type and volume of dispersive solvent and salt addition were evaluated to achieve the highest yield and to attain the lowest detection limits. The DLLME procedure optimized consists in the formation of a cloudy solution promoted by the fast addition to the sample (5 ml) of a mixture of carbon tetrachloride (extraction solvent, 100 μl) and acetone (dispersive solvent, 400 μl). The tiny droplets formed and dispersed among the aqueous sample solution are further joined and sedimented (85 μl) in the bottom of the conical test tube by centrifugation. Once extracted, all the 24 pesticides were directly injected and separated by a dual GC column system, comprising a short wide-bore DB-5 capillary column with low film thickness connected by a Deans switch system to a second chromatographic narrower column, with identical stationary phase. The instrumental setting used, in combination with carefully optimized operational fast GC and MS parameters, markedly decreased the retention times of the targeted analytes. The total chromatographic run was 8 min. Mean recoveries for apple juice spiked at three concentrations ranged from 60% to 105% and the intra-repeatability ranged from 1% to 21%. The limits of detection of the 24 pesticides ranged from 0.06 to 2.20 μg/L. In 2 of a total of 28 analysed samples were found residues of captan, although at levels below the maximum limit legal established.     

Fast liquid chromatography–quadrupole-linear ion trap mass spectrometry for the analysis of pharmaceuticals and hormones in water resources

This paper presents the development of a fast multi-residue method for the determination of 49 pharmaceuticals and 6 metabolites from different therapeutic classes in water resources by means of Ultra-performance™ liquid chromatography (UPLC) coupled to tandem mass spectrometry. The use of the UPLC technology enabled all the 55 compounds to be separated chromatographically in less than 9 min (6.3 min positive mode and 2.7 min negative mode) and with a total analysis time of 18 min when considering column conditioning. Improved resolution, sensitivity and a reduction of matrix effects were obtained under these conditions. Unequivocal identification and quantification of the target compounds was also performed by using the dual acquisition modes of the hybrid triple quadrupole-linear ion trap (QqLIT) system. Triple quadrupole mode by means of selected reaction monitoring (SRM) was used for quantification, whilst a second SRM transition together with information-dependent analysis (IDA) experiments was used for confirmation. Additionally, one general, single solid-phase extraction (SPE) method was developed by using Oasis HLB cartridges. Quality parameters of the method in wastewaters were established obtaining a fast, robust, reproducible and cost-effective method for all the target pharmaceuticals. Finally, the optimized SPE-UPLC/QqLIT method was used for the analysis of the target compounds in wastewaters from Spain. Thirty-one out of fifty-five compounds were identified in the samples collected.     

Determination of multiple pharmaceutical classes in surface and ground waters by liquid chromatography–ion trap–tandem mass spectrometry

This paper describes development, optimization and application of analytical method for determination and reliable confirmation of nineteen pharmaceuticals from different therapeutic classes (antibiotics—β-lactams, cephalosporines, sulfonamides, macrolides and tetracyclines; benzodiazepines; antiepileptics and analgoantipyretics) in surface and ground waters at ng l⁻¹ levels. Water samples were prepared using solid-phase extraction and extracts were analyzed by liquid chromatography–ion trap–tandem mass spectrometry with electrospray ionization in both positive and negative ionization mode. The efficiency of ten different SPE cartridges to extract diverse compounds from water was tested. The pH-value of the water sample, the volume of elution solvent and the sample volume were optimized. Matrix effect, especially pronounced for cephalexin and metamizole, was eliminated using matrix-matched standards. It was determined that extraction should be performed at pH ∼ 7.5, i.e. without pH adjustment, and at pH 3, depending on the analyte. Azithromycin, doxycycline and acetylsalicylic acid must be extracted in acidic environment, whereas extraction of paracetamol, ampicillin, erythromycin and metamizole should be performed without pH adjustment. Repeatability of the method was generally lower than 20%. The estimated limits of detection were in the range from 0.15 to 12.46 ng l⁻¹. The method was applied to 26 water samples for monitoring of selected drug residues. Results revealed the presence of carbamazepine (80% of water samples), azithromycin (23%), as well as trimethoprim and paracetamol (both 15%). The most striking was the false positive signal of diclofenac in every analyzed water sample. Confirmation of the positive results was performed by repeated injection of the positive sample extracts using confirmatory method with additional transitions.     

Rapid comprehensive characterization of crude oils by thermogravimetry coupled to fast modulated gas chromatography–single photon ionization time-of-flight mass spectrometry

Comprehensive multi-dimensional hyphenation of a thermogravimetry device (i.e. a thermobalance) to gas chromatography and single photon ionization–time-of-flight mass spectrometry (TG–GC×SPI–MS) has been used to investigate two crude oil samples of different geographical origin. The source of the applied vacuum ultraviolet radiation is an electron beam pumped rare gas excimer lamp (EBEL). The soft photoionization favors the formation of molecular ions. Introduction of a fast, rapidly modulated gas chromatographic separation step in comparison with solely TG–SPI–MS enables strongly enhanced detection especially with such highly complex organic matrices as crude oil. In contrast with former TG–SPI–MS measurements, separation and identification of overlying substances is possible because of different GC retention times. The specific contribution of isobaric compounds to one mass signal is determined for alkanes, naphthalenes, alkylated benzenes, and other compounds.

Determination of UV filters in both soluble and particulate fractions of seawaters by dispersive liquid–liquid microextraction followed by gas chromatography–mass spectrometry

An analytical method to determine the total content (i.e., not only in the soluble fraction but also in the particulate one) of eight commonly used UV filters in seawater samples is presented for the first time. Dispersive liquid–liquid microextraction (DLLME) is used as microextraction technique to pre-concentrate the target analytes before their determination by gas chromatography–mass spectrometry (GC–MS). In order to release the UV filters from the suspended particles an ultrasound treatment is performed before DLLME. The ultrasound treatment time was studied in order to achieve a quantitative lixiviation of the target analytes. The type and volume of both disperser and extraction solvent, the sample volume, the pH and the ionic strength involved in the DLLME have been optimized to provide the best enrichment factors. Under the optimized conditions, the method was successfully validated showing good linearity, enrichment factors between 112 and 263 depending on the analyte, limits of detection and quantification in the low ng L⁻¹ range (10–30 ng L⁻¹ and 33–99 ng L⁻¹, respectively) and good intra- and inter-day repeatability (RSD <15%). No significant matrix effects were found. Finally, the method was satisfactorily applied to the analysis of three seawater samples from different origin. Results showed significant amounts of UV filters in the particulate fraction that would have been ignored if only the soluble fraction had been considered. This fact shows that the UV filters are also accumulated in the suspended particles contained in water, what should be taken into account from an environmental standpoint.