Sensitive detection of biothiols and histidine based on the recovered fluorescence of the carbon quantum dots–Hg(II) system

In this paper, we presented a novel, rapid and highly sensitive sensor for glutathione (GSH), cysteine (Cys) and histidine (His) based on the recovered fluorescence of the carbon quantum dots (CQDs)–Hg(II) system. The CQDs were synthesized by microwave-assisted approach in one pot according to our previous report. The fluorescence of CQDs could be quenched in the presence of Hg(II) due to the coordination occurring between Hg(II) and functional groups on the surface of CQDs. Subsequently, the fluorescence of the CQDs–Hg(II) system was recovered gradually with the addition of GSH, Cys or His due to their stronger affinity with Hg(II). A good linear relationship was obtained from 0.10 to 20 μmol L⁻¹ for GSH, from 0.20 to 45 μmol L⁻¹ for Cys and from 0.50 to 60 μmol L⁻¹ for His, respectively. This method has been successfully applied to the trace detection of GSH, Cys or His in human serum samples with satisfactory results. The proposed method was simple in design and fast in operation, which demonstrated great potential in bio-sensing fields.     

Solid-state chemiluminescence assay for ultrasensitive detection of antimony using on-vial immobilization of CdSe quantum dots combined with liquid–liquid–liquid microextraction

On-vial immobilized CdSe quantum dots (QDs) are applied for the first time as chemiluminescent probes for the detection of trace metal ions. Among 17 metal ions tested, inhibition of the chemiluminescence when CdSe QDs are oxidized by H₂O₂ was observed for Sb, Se and Cu. Liquid–liquid–liquid microextraction was implemented in order to improve the selectivity and sensitivity of the chemiluminescent assay.     

Simple and sensitive detection method for chromium(VI) in water using glutathione—capped CdTe quantum dots as fluorescent probes

Water-soluble and stable CdTe quantum dots (QDs) were synthesized in aqueous solution with glutathione (GSH) as the stabilizer. GSH is employed by nature to detoxify heavy metal ions. As a result of specific interaction, the fluorescence intensity of GSH-capped QDs is selectively reduced in the presence of Cr(VI). Under the optimum conditions, the relative fluorescence intensity decreases linearly with the Cr(VI) concentration in the range from 0.01 to 1.00?µg mL^?1, and the detection limit is 0.008?µg mL^?1. The luminescence response of the QDs to ions markedly depended on the particle size, and a new strategy for tuning the selectivity of luminescent QDs to certain ions without changing the capping layer of the QDs can be achieved by changing the crystallite size of the QDs.     

A one-step selective fluorescence turn-on detection of cysteine and homocysteine based on a facile CdTe/CdS quantum dots–phenanthroline system

In this paper, we report a simple, selective, sensitive and low-cost turn-on photoluminescent sensor for cysteine and homocysteine based on the fluorescence recovery of the CdTe/CdS quantum dots (QDs)–phenanthroline (Phen) system. In the presence of Phen, the fluorescence of QDs could be quenched effectively due to the formation of the non-fluorescent complexes between water-soluble thioglycolic acid (TGA)-capped QDs and Phen. Subsequently, upon addition of cysteine and homocysteine, the strong affinity of cysteine and homocysteine to QDs enables Phen to be dissociated from the surface of QDs and to form stable and luminescent complexes with cysteine and homocysteine in solution. Thus, the fluorescence of CdTe/CdS QDs was recovered gradually. A good linear relationship was obtained from 1.0 to 70.0 μM for cysteine and from 1.0 to 90.0 μM for homocysteine, respectively. The detection limits of cysteine and homocysteine were 0.78 and 0.67 μM, respectively. In addition, the method exhibited a high selectivity for cysteine and homocysteine over the other substances, such as amino acids, thiols, proteins, carbohydrates, etc. More importantly, the sensing system can not only achieve quantitative detection of cysteine and homocysteine but also could be applied in semiquantitative cysteine and homocysteine determination by digital visualization. Therefore, as a proof-of-concept, the proposed method has potential application for the selective detection of cysteine and homocysteine in biological fluids.     

Optical detection and discrimination of cystic fibrosis-related genetic mutations using oligonucleotide–nanoparticle conjugates

Novel methods for application of oligonucleotide–gold nanoparticle conjugates to selective colorimetric detection and discrimination of cystic fibrosis (CF) related genetic mutations in model oligonucleotide systems are presented. Three-strand oligonucleotide complexes are employed, wherein two probe oligonucleotide–gold nanoparticle conjugates are linked together by a third target oligonucleotide strand bearing the CF-related mutation(s). By monitoring the temperature dependence of the optical properties of the complexes, either in solution or on silica gel plates, melting behaviors may be accurately and reproducibly compared. Using this approach, fully complementary sequences are successfully distinguished from mismatched sequences, with single base mismatch resolution, for F 508, M470V, R74W and R75Q mutations.     

Single domain antibody–quantum dot conjugates for ricin detection by both fluoroimmunoassay and surface plasmon resonance

The combination of stable biorecognition elements and robust quantum dots (QDs) has the potential to yield highly effective reporters for bioanalyses. Llama-derived single domain antibodies (sdAb) provide small thermostable recognition elements that can be easily manipulated using standard DNA methods. The sdAb was self-assembled on dihydrolipoic acid (DHLA) ligand-capped CdSe–ZnS core–shell QDs made in our laboratory through the polyhistidine tail of the protein, which coordinated to zinc ions on the QD surface. The sdAb–QD bioconjugates were then applied in both fluorometric and surface plasmon resonance (SPR) immunoassays for the detection of ricin, a potential biothreat agent. The sdAb–QD conjugates functioned in fluoroimmunoassays for the detection of ricin, providing equivalent limits of detection when compared to the same anti-ricin sdAb labeled with a conventional fluorophore. In addition, the DHLA-QD–sdAb conjugates were very effective reporter elements in SPR sandwich assays, providing more sensitive detection with a signal enhancement of ∼10-fold over sdAb reporters and 2–4 fold over full sized antibody reporters. Commercially prepared streptavidin-modified polymer-coated QDs also amplified the SPR signal for the detection of ricin when applied to locations where biotinylated anti-ricin sdAb was bound to target; however, we observed a 4-fold greater amplification when using the DHLA-QD–sdAb conjugates in this format.     

Rolling cycle amplification based single-color quantum dots–ruthenium complex assembling dyads for homogeneous and highly selective detection of DNA

In this work, a new, label-free, homogeneous, highly sensitive, and selective fluorescent biosensor for DNA detection is developed by using rolling-circle amplification (RCA) based single-color quantum dots–ruthenium complex (QDs–Ru) assembling dyads. This strategy includes three steps: (1) the target DNA initiates RCA reaction and generates linear RCA products; (2) the complementary DNA hybridizes with the RCA products to form long double-strand DNA (dsDNA); (3) [Ru(phen)₂(dppx)]²⁺ (dppx = 7,8-dimethyldipyrido [3,2-a:2′,3′-c] phenanthroline) intercalates into the long dsDNA with strong fluorescence emission. Due to its strong binding propensity with the long dsDNA, [Ru(phen)₂(dppx)]²⁺ is removed from the surface of the QDs, resulting in restoring the fluorescence of the QDs, which has been quenched by [Ru(phen)₂(dppx)]²⁺ through a photoinduced electron transfer process and is overlaid with the fluorescence of dsDNA bonded Ru(II) polypyridyl complex (Ru-dsDNA). Thus, high fluorescence intensity is observed, and is related to the concentration of target. This sensor exhibits not only high sensitivity for hepatitis B virus (HBV) ssDNA with a low detection limit (0.5 pM), but also excellent selectivity in the complex matrix. Moreover, this strategy applies QDs–Ru assembling dyads to the detection of single-strand DNA (ssDNA) without any functionalization and separation techniques.     

FRET based selective and ratiometric ‘naked-eye’ detection of CN in aqueous solution on fluorescein–Zn–naphthalene ensemble platform

We have developed a FRET-based ratiometric fluorescent probe for the detection of CN⁻ using a fluorescein–Zn–naphthalene ensemble (NFH·Zn²⁺). The sensing mechanism was ascribed by displacement approach. The chemosensor exhibits high selectivity and sensibility for CN⁻. The speculation was supported by fluorescence emission spectra, UV–vis spectrum, ¹H NMR titration experiments, and mass spectra. The interconversion of probe NFH and NFH·Zn²⁺ via the complexation/decomplexation by the modulation of Zn²⁺/CN⁻ mimics INHIBIT gate. In addition, it also shows an excellent performance in ‘dip stick’ method.     

Simultaneous screening of homotaurine and taurine in marine macro-algae using liquid chromatography–fluorescence detection

Simultaneous analysis of homotaurine and its homologous, taurine, is a highly challenging issue, especially in matrices they exist simultaneously. A simple precolumn derivatization procedure combined with high-performance liquid chromatography–fluorescence detection was developed for simultaneous determination of homotaurine and taurine in marine macro-algae. The analytes were derivated with o-phthalaldehyde at an ambient temperature and alkaline medium. Calibration curves were linear in the ranges of 50–2500 µg L^?1 for homotaurine and 100–2500 µg L^?1 for taurine with the coefficients of determination higher than 0.998. Limits of detection of homotaurine and taurine were 15 and 30 µg L^?1, respectively. Intraday (n = 6) and inter-day (n = 4) precisions of the method were satisfactory with relative standard deviations less than 6.0%. Good recoveries (>94%) were acquired by the method for extraction of homotaurine and taurine from algae matrices. Liquid chromatography–mass spectrometry was also used to confirm detection of the analytes in algae samples. The data suggest that the method was successfully applied to simultaneous determination of homotaurine and taurine in algae samples.     

Two types of rhodamine–naphthalimide-based fluorescence sensors for different ratiometric detection of Hg(II) or Fe(III)

Two types of rhodamine–naphthalimide sensors 1a–1c and RND with different polyamine linkers and terminal chains were designed and synthesized for different ratiometric detection of Fe(III) or Hg(II). The fluorescent properties including response time, pH effect, selectivity, anti-interference, fluorescence titration and reproducibility were investigated and compared in details. Sensor RND possessing two recognition groups of rhodamine and 1-(pyridin-2-ylmethyl)piperazine displayed good response and selectivity to Hg(II) with a detection limit of 1.72 μmol/L, whereas 1a–1c with piperidine instead of 1-(pyridin-2-ylmethyl)piperazine showed quite different recognition to Fe(III) and the detection limit of 1b was the lowest (1.92 μmol/L). The Hg(II)/Fe(III) chelation-induced dual/single recognition mechanisms as well as the structure–fluorescence properties relationships (SFPRs) were discussed in detail with the aid of quantum chemical density functional theory (DFT) calculations. Through adjusting the linker and introducing other recognition groups to rhodamine- naphthalimide system, novel sensors with selective recognition of different metal ions should be achieved.

     

An improved method for extraction of β-carotene from blakeslea trispora

An improved method for the extraction of β-carotene from Blakeslea trispora is described. The fermentation broth was steamed at 121°C for 15 min, and the liquid was centrifuged at 5000g for 20 min. β-Carotene was removed from the biomass by extraction with absolute ethanol at a ratio of 1:100 at 30°C for 2 h in a rotary shaker incubator at 300 rpm. The carotenoid pigment was completely removed from the cells after three repeated extractions. The removal of β-carotene from B. trispora was higher during the first stage (75%) whereas in the other stages it was very slow.     

New opportunities in multiplexed optical bioanalyses using quantum dots and donor–acceptor interactions

In this study, we investigated the feasibility of using a novel volatile organic compound (VOC)-based metabolic profiling approach with a newly devised chemometrics methodology which combined rapid multivariate analysis on total ion currents with in-depth peak deconvolution on selected regions to characterise the spoilage progress of pork. We also tested if such approach possessed enough discriminatory information to differentiate natural spoiled pork from pork contaminated with Salmonella typhimurium, a food poisoning pathogen commonly recovered from pork products. Spoilage was monitored in this study over a 72-h period at 0-, 24-, 48- and 72-h time points after the artificial contamination with the salmonellae. At each time point, the VOCs from six individual pork chops were collected for spoiled vs. contaminated meat. Analysis of the VOCs was performed by gas chromatography/mass spectrometry (GC/MS). The data generated by GC/MS analysis were initially subjected to multivariate analysis using principal component analysis (PCA) and multi-block PCA. The loading plots were then used to identify regions in the chromatograms which appeared important to the separation shown in the PCA/multi-block PCA scores plot. Peak deconvolution was then performed only on those regions using a modified hierarchical multivariate curve resolution procedure for curve resolution to generate a concentration profiles matrix C and the corresponding pure spectra matrix S. Following this, the pure mass spectra (S) of the peaks in those region were exported to NIST 02 mass library for chemical identification. A clear separation between the two types of samples was observed from the PCA models, and after deconvolution and univariate analysis using N-way ANOVA, a total of 16 significant metabolites were identified which showed difference between natural spoiled pork and those contaminated with S. typhimurium.     

CdTe quantum dots as fluorescence sensor for the determination of vitamin B6 in aqueous solution

A novel, rapid and simple CdTe quantum dots （QDs） based technology platform was established for selective and sensitive determination of vitamin B6 in aqueous solution. It can perform accurate and reproducible quantification of vitamin B6 in pharmaceutical with satisfactory results.     

CdS quantum dots as fluorescence probes for the sensitive and selective detection of highly reactive HSe<Superscript>−</Superscript> ions in aqueous solution

Water-soluble cadmium sulfide (CdS) quantum dots (QDs) capped by mercaptoacetic acid were synthesized by aqueous-phase arrested precipitation, and characterized by transmission electron microscopy, spectrofluorometry, and UV-Vis spectrophotometry. The prepared luminescent water-soluble CdS QDs were evaluated as fluorescence probes for the detection of highly reactive hydrogen selenide ions (HSe⁻ ions). The quenching of the fluorescence emission of CdS QDs with the addition of HSe⁻ ions is due to the elimination of the S²⁻ vacancies which are luminescence centers. Quantitative analysis based on chemical interaction between HSe⁻ ions and the surface of CdS QDs is very simple, easy to develop, and has demonstrated very high sensitivity and selectivity features. The effect of foreign ions (common anions and biologically relevant cations) on the fluorescence of the CdS QDs was examined to evaluate the selectivity. Only Cu²⁺ and S²⁻ ions exhibit significant effects on the fluorescence of CdS QDs. With the developed method, we are able to determine the concentration of HSe⁻ ions in the range from 0.10 to 4.80 μmol L⁻¹, and the limit of detection is 0.087 μmol L⁻¹. The proposed method was successfully applied to monitor the obtained HSe⁻ ions from the reaction of glutathione with selenite. To the best of our knowledge, this is the first report on fluorescence analysis of HSe⁻ ions in aqueous solution. Figure CdS quantum dots as fluorescence probes for the sensitive and selective detection of highly reactive HSe- ions in aqueous solution     

A ratiometric electrochemical biosensor for sensitive detection of Hg based on thymine–Hg–thymine structure

In this paper, a simple, selective and reusable electrochemical biosensor for the sensitive detection of mercury ions (Hg²⁺) has been developed based on thymine (T)-rich stem–loop (hairpin) DNA probe and a dual-signaling electrochemical ratiometric strategy. The assay strategy includes both “signal-on” and “signal-off” elements. The thiolated methylene blue (MB)-modified T-rich hairpin DNA capture probe (MB-P) firstly self-assembled on the gold electrode surface via Au–S bond. In the presence of Hg²⁺, the ferrocene (Fc)-labeled T-rich DNA probe (Fc-P) hybridized with MB-P via the Hg²⁺-mediated coordination of T–Hg²⁺–T base pairs. As a result, the hairpin MB-P was opened, the MB tags were away from the gold electrode surface and the Fc tags closed to the gold electrode surface. These conformation changes led to the decrease of the oxidation peak current of MB (I_MB), accompanied with the increase of that of Fc (I_Fc). The logarithmic value of I_Fc/I_MB is linear with the logarithm of Hg²⁺ concentration in the range from 0.5 nM to 5000 nM, and the detection limit of 0.08 nM is much lower than 10 nM (the US Environmental Protection Agency (EPA) limit of Hg²⁺ in drinking water). What is more, the developed DNA-based electrochemical biosensor could be regenerated by adding cysteine and Mg²⁺. This strategy provides a simple and rapid approach for the detection of Hg²⁺, and has promising application in the detection of Hg²⁺ in real environmental samples.     

Liquid chromatography–fluorescence detection for simultaneous analysis of sulfonamide residues in honey

A rapid, accurate LC analytical method has been developed for determination of eight sulfonamides (sulfacetamide, sulfapyridine, sulfamerazine, sulfamethoxypyridazine, sulfameter, sulfachloropyridazine, sulfamethoxazole and sulfadimethoxine) in honey. The sample was dissolved in phosphoric acid solution (pH 2). After filtration, the sample solution was cleaned by use of two solid-phase extraction (SPE) cartridges-an aromatic sulfonic cation-exchange cartridge and an Oasis HLB cartridge. The eight sulfonamides were then derivatized with fluorescamine and the derivatives were determined by LC with fluorescence detection at excitation and emission wavelengths of 405 and 495 nm, respectively. Average recoveries at three fortification levels in the range 0.02-0.50 mg kg(-1) in twelve different kinds of honey were 73.5-94.1% with coefficients of variation of 4.35-16.60%. The limit of detection (LOD) was 0.002 mg kg(-1) for sulfacetamide, sulfapyridine, sulfamerazine, and sulfamethoxypyridazine; that for sulfameter, sulfachloropyridazine, sulfamethoxazole and sulfadimethoxine was 0.005 mg kg(-1). The limit of quantitation (LOQ) was 0.005 mg kg(-1) for sulfacetamide, sulfapyridine, sulfamerazine, and sulfamethoxypyridazine; that for sulfameter, sulfachloropyridazine, sulfamethoxazole, and sulfadimethoxine was 0.010 mg kg(-1). The method is suitable for determination of multiresidue sulfonamides in the various kinds of honey.     

Controlling optical properties and electronic energy structure of I–III–VI semiconductor quantum dots for improving their photofunctions

I–III–VI multinary semiconductors, which have low toxicity, are attracting much attention as quantum dot (QD) materials for replacing conventional binary semiconductors that contain highly toxic heavy metals, Cd and Pb. Recently, the inherent design flexibility of multinary QDs has also been attracting attention, and optoelectronic property control has been demonstrated in many ways. Besides size control, the electronic and optical properties of multinary QDs can be changed by tuning the chemical composition with various methods including alloying with other semiconductors and deviation from stoichiometry. Due to significant progress in synthetic methods, the quality of such multinary QDs has been improved to a level similar to that of Cd-based binary QDs. Specifically, increased photoluminescence quantum yield and recently narrowed linewidth have led to new application fields for multinary QDs. In this review, a historical overview of the solution-phase synthesis of I–III–VI QDs is provided and the development of strategies for better control of optoelectronic properties, i.e., electronic structures, energy gap, optical absorption profiles, and photoluminescence feature, is discussed. In addition, applications of these QDs to luminescent devices and light energy conversion systems are described. The performance of prepared devices can be improved by controlling the optical properties and electronic structures of QDs by changing their size and composition. Clarification of the unique features of I–III–VI QDs in detail will be the base for further development of novel applications by utilizing the complexity of multinary QDs.     

An electrochemical chiral sensor based on amino-functionalized graphene quantum dots/β-cyclodextrin modified glassy carbon electrode for enantioselective detection of tryptophan isomers

An electrochemical chiral sensing platform based on amino-functionalized graphene quantum dots/β-cyclodextrin modified glassy carbon electrode (NH₂-GQDs/β-CD/GCE) was developed for enantioselective detection of tryptophan (Trp) isomers. NH₂-GQDs/β-CD/GCE showed high electrocatalytic activity and good analytical behavior toward the oxidation of Trp isomers. The oxidation peak potentials and oxidation peak currents of Trp isomers at NH₂-GQDs/β-CD/GCE surface were observed by differential pulse voltammetry. NH₂-GQDs/β-CD nanocomposite exhibited different binding ability for two Trp isomers and selectively bonded with d-Trp, resulting in the higher oxidation peak current of d-Trp at NH₂-GQDs/β-CD/GCE surface. Trp isomers exhibited different oxidation peak potentials at NH₂-GQDs/β-CD/GCE surface, and the peak potential separation between l-Trp and d-Trp was around 0.022 V, which was used for the enantioselective detection of Trp isomers. Under the optimum experimental conditions, the oxidation peak currents were linearly dependent on the concentrations of Trp isomers. The linear ranges of l-Trp and d-Trp were all from 1.0 to 30.0 μM with correlation coefficients of 0.9886 and 0.9800, respectively. The detection limits of l-Trp and d-Trp were 0.65 and 0.12 μM (3σ/K), respectively. Such NH₂-GQDs/β-CD/GCE displayed high anti-interference against some physiological substances, good reproducibility and excellent long-term stability toward Trp isomers detection in biomedical applications.     

Characterization and application of quantum dot nanocrystal–monoclonal antibody conjugates for the determination of sulfamethazine in milk by fluoroimmunoassay

Quantum dot (Qdot) nanocrystals have been increasingly used as fluorescence labels in fluoroimmunoassays recently because of their excellent optical characteristics. In this paper, a new monoclonal antibody (MAb) against sulfamethazine (SMZ) was successfully produced and linked to Qdot nanocrystals by covalent coupling. The Qdot–MAb conjugates were characterized by SDS-PAGE and high-performance capillary electrophoresis (HPCE). An enzyme-linked immunosorbent assay (ELISA) method was utilized to evaluate the antigen–antibody binding affinity and then a novel direct competitive fluorescence-linked immunosorbent assay (cFLISA) for the detection of SMZ in milk by using Qdots as fluorescent labels was evaluated. The results showed that the 50% inhibition values (IC₅₀) of the cFLISA were 4.3 ng/mL in milk and 5.2 ng/mL in PBS, and the limits of detection (LODs) were 0.6 ng/mL in milk and 0.4 ng/mL in PBS, respectively. The recoveries of SMZ from spiked milk samples at levels of 10–100 ng/mL ranged from 94 to 106%, with coefficients of variation (CVs) of 2.1–9.2%. Figure Shematic diagram of the direct cFLISA procedure Jianzhong Shen and Fei Xu contributed equally to this work.     

Integrated sorption–energy-dispersive X-ray fluorescence detection for automatic determination of lead and cadmium in low-concentration solutions

Sorbent material packed in a PTFE laboratory-made flow cell located in the specimen holder of an energy-dispersive X-ray fluorescence (EDXRF) detector has been used for in situ solid-phase extraction (SPE) preconcentration–detection of metals. The flow cell was connected to a single-channel flow-injection (FI) manifold (for full automation of the steps and proper development of the method) by two PTFE tubes of 0.5-mm inner diameter introduced into the spectrometer specimen holder by a small orifice without distortion or modification of the instrument. The optical window open in the PTFE flow cell was adjusted to the X-ray irradiation zone of the spectrometer and fixed to it. The approach was tested by using both Pb and Cd aqueous solutions and a Dowex 50 cation-exchange resin as a sorbent, and flushing the sample through the flow cell for EDXRF measurements after removal of the sample matrix. The limits of detection and the limits of quantification (LOQs) thus obtained were 0.15 and 0.5 μg for Pb and 0.3 and 0.8 μg for Cd, respectively, values that allow the approach to be used for the analysis of drinking water by injecting a 100-mL sample into the FI manifold, taking into account the EC drinking water directives. The linear dynamic ranges are between the LOQ and 600 μg for both analytes. The method was validated by the standard addition method using tap-water samples. In addition, the integrated SPE–EDXRF approach enables the study of the variables influencing the sorption step–namely the effects of the volume of sample flushed through the column, concentrations of the analytes in the sample, breakthrough volume of the resin, elution profiles, sample pH and retention and elution flow rates–in an automatic, cheap, fast and precise way.