The photostability of wool doped with photocatalytic titanium dioxide nanoparticles

Photoyellowing of wool is a serious problem for the wool industry. This study assessed the role of photocatalytic nanocrystalline titanium dioxide (P-25) as a potential antagonist or catalyst in the photoyellowing of wool. Untreated, bleached and bleached and fluorescent-whitened wool slivers were processed into fine wool powders for the purpose of even and intimate mixing with the TiO₂ nanoparticles in the solid state. Pure wool and wool/TiO₂ mixtures were then compressed into solid discs for a photoyellowing study under simulated sunlight and under UVB and UVC radiations. Yellowness and photo-induced chemiluminescence (PICL) measurements showed that nanocrystalline TiO₂ could effectively reduce the rate of photoyellowing by inhibiting free radical generation in doped wool, and that a higher concentration of TiO₂ contributed to a lower rate of photooxidation and reduced photoyellowing. Hence nanocrystalline TiO₂ acts primarily as a UV absorber on wool in dry conditions and not as a photocatalyst.     

Photoactivity of mechanochemically prepared nanoparticulate titanium dioxide investigated by EPR spectroscopy

Titanium dioxide nanopowders were prepared by mechanochemical synthesis in a high-energy ball mill using TiOSO₄·xH₂O and Na₂CO₃ followed by annealing in the temperature range 200–800 °C. The UVA photonic efficiency of radical processes on synthesized TiO₂ powders was determined by in situ EPR spectroscopy, using, as indicators, the N-oxide spin trapping agents (5,5-dimethyl-1-pyrroline N-oxide and 5-(diisopropoxy-phosphoryl)-5-methyl-1-pyrroline N-oxide) or the radical cation of 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonate, ABTS⁺). The results obtained by monitoring the photoinduced generation of hydroxyl radical spin adducts correlated with those found by the investigation of the photoreduction of ABTS⁺. The presence of iron and chromium ions, which were evidenced in samples milled in steel, decreased the photonic efficiency of radical processes. The presence of a sulfate salt matrix during the annealing process distinctly inhibits the transformation of anatase to rutile. The highest photocatalytic activity was shown by anatase samples which were prepared by milling in corundum and annealed at 700 °C. They were composed of crystallites with a mean size of 25–30 nm and well developed crystal faces.     

Adsorbate-substrate interaction between chlorodifluoromethane and titanium dioxide: Infrared spectroscopy and density functional theory studies

Infrared spectra of chlorodifluoromethane (CHClF₂) adsorbed on titanium dioxide (TiO₂) at room temperature have been investigated for the first time. From the comparison between the adsorption characteristics and the gas-phase spectra it can be deduced that the molecule interacts with the surface Lewis acid site (Ti⁴⁺) mainly through the Cl atom even if also the adsorption with one F atom is also observed. Moreover, the spectra show the presence of H-bonds between the CH group and the surface Lewis basic site (OH⁻ or O²⁻). In order to obtain more information on the molecule orientation and the variation of the structural parameters, a DFT-B3LYP study has been carried out considering the anatase (1 0 1) surface and evaluating the adsorption energetics in terms of interaction, distortion and binding energies. The obtained geometries confirm that both the acid-base interactions through Cl or F atoms are possible and suggest the formation of one H-bond between the CH group of the molecule and the Lewis basic site of the surface. The calculated vibrational frequencies of the adsorbed molecule have been found to be in reasonable agreement with the experimental data.     

Real-time cell-microelectronic sensing of nanoparticle-induced cytotoxic effects

We report a real-time cell analysis (RTCA) sensing method of 96 electronic microwells for profiling the cytotoxicity of nanoparticles on different cell lines. The method consists of 96 microwells embedded with microelectrodes (96x E-plate) to measure impedance changes of adherent cell lines. When the testing cells change in population, adhesion, and/or morphology, the impedance at the cell–electrode interface changes to provide real-time monitoring of overall cell status. To demonstrate this technique, we used three cell lines as sensing probes: two human lung carcinoma cell lines, A549 and SK-MES-1, and a normal mammalian cell line, CHO-K1. We tested two well-characterized nanoparticles: nano-titanium dioxide (nTiO₂) and nano-silver (nAg). The three cell lines were separately seeded into 96x E-plates and treated with varying concentrations of nanoparticles (0.078–160 μg mL⁻¹). This method provides dynamic cell response profiles and temporal IC₅₀ histograms, showing concentration-, time-, particle-, and cell-dependent cytotoxicity. The 24 h and 48 h IC₅₀ values of nAg obtained using both the RTCA and the neutral red uptake (NRU) assays were in good agreement, validating the RTCA technique. The RTCA assay does not suffer interference from nTiO₂, whereas the NRU assay cannot be used due to severe interference from nTiO₂. A cytostatic response was observed in CHO-K1 cells after 24 h exposure to 40 μg mL⁻¹ nTiO₂, which was correlated with S-phase cell cycle arrest based on cell cycle analysis using flow cytometry. This suggests that the shapes of the response curves provide indicative information, directing further studies into the mode of action of the toxicant. Advantages of the RTCA technique over traditional colorimetric assays for screening the cytotoxicity of nanoparticles include minimizing interference, qualitative and quantitative cytotoxicity data, and the capability of real-time and high-throughput measurements.     

Photocatalysed degradation of uracil in aqueous titanium dioxide suspensions: mechanisms, pH and cadmium chloride effects

Upon UV irradiation, in O₂ saturated aqueous titanium dioxide suspensions, uracil is almost completely mineralised. Most of the organic compounds occurring during the photodegradation process have been identified by means of liquid chromatography and mass spectrometry coupled techniques (LC–MS). The first step of the mineralisation leads to the formation of uracilglycol. Then, the main products generated during the photodegradation exhibit new functions such as polyol, carboxylic and aldehyde. The presence of urea has been clearly evidenced. At the end of the process, the ultimate step is the formation of nitrate and ammonium ions. The formation kinetics of intermediate products are modified by pH variation and CdCl₂ addition.     

Fabrication and superhydrophobicity of fluorinated titanium dioxide nanocoatings

This study demonstrates the fabrication of a stable superhydrophobic surface with low contact angle hysteresis (CAH) using an arrangement of nanoscale TiO₂ spheres. The control of precursor quantity is selected as the key factor in determining surface roughness that significantly intensifies water contact angle (CA) of TiO₂ films. After surface fluorination treatment, the anatase-type crystalline surfaces exhibit good water repellency (CA 166.1°), low CAH (6°), and superhydrophobic stability (>60 min). Enhanced water repellency is attributed to the fact that the higher density of TiO₂ spheres results in more tortuous three-phase contact line, leading to the self-cleaning effect. Such a unique textured surface imparts many promising potentials for engineering and the development of optics devices with robust superhydrophobic materials.     

Characterization of the chemical interaction between single-walled carbon nanotubes and titanium dioxide nanoparticles by thermogravimetric analyses and resonance Raman spectroscopy

Raman spectroscopy is a powerful technique that is used to characterize or observe alterations in the structure or properties of carbon nanotubes and its composites. This method can provide information about electronic changes or quantify them. We used Raman spectroscopy to study the chemical and electronic changes in a composite formed by titanium dioxide nanoparticles and single-walled carbon nanotubes. This composite was characterized by scanning electron microscopy to investigate the morphology and by thermogravimetric analyses to assess the thermal stability of the isolated carbon nanotubes as compared with the nanotubes by titanium dioxide nanoparticles. The Raman results showed that the modification of the nanotubes with the TiO₂ nanoparticles generates a new material with different structure of the nanotubes, resulting in a decrease in defects. The charge transfer from the TiO₂ nanoparticles to the nanotubes alters the electronic properties of both moieties in the hybrid material. The interaction between the nanotubes and nanoparticles decreases the CC bound order of the nanotubes and decreases their thermal stability.     

Electrochemical impedance spectroscopy of mesoporous Al-stabilized TiO<Subscript>2</Subscript> (anatase) in aprotic medium

High-frequency electrochemical impedance spectroscopy was used to investigate the mesoporous film of Al-stabilized TiO₂ on F-doped SnO₂ support in 1 M Li(CF₃SO₂)₂N in ethylene carbonate/dimethoxyethane (1:1 v/v). Kinetic parameters, viz. charge transfer resistance and chemical diffusion coefficient, were determined. Charge transfer resistance increased with time of contact of electrode in the above aprotic electrolyte solution. The increase followed exponential dependence, whereas the double layer capacitance, simultaneously, decreased exponentially with time. These effects were discussed in terms of the solid–electrolyte interface, which undergoes chemical changes upon contact with the electrolyte solution. Adel Attia is currently on leave from the Department of Physical Chemistry, National Research Center, El-Tahrir St., Dokki 12622, Cairo, Egypt.     

Occurrence and prevention of photodissolution at the phase junction of magnetite and titanium dioxide

A stable magnetic photocatalyst was prepared by coating a magnetic core with a layer of photoactive titanium dioxide. A direct deposition of titanium dioxide onto the surface of magnetic iron oxide particles proved ineffective in producing a stable magnetic photocatalyst, with high levels of photodissolution being observed with these samples. This observed photodissolution is believed to be due to the dissolution of the iron oxide phase, induced by the photoactive the titanium dioxide layer due to electronic interactions at the phase junction in these magnetic photocatalysts. The introduction of an intermediate passive SiO₂ layer between the titanium dioxide phase and the iron oxide phase inhibited the direct electrical contact and hence prevented the photodissolution of the iron oxide phase. The magnetic photocatalyst is for use in slurry-type reactors from which the catalyst can be easily recovered by the application of an external magnetic field.     

A study of the effect of the synthesis conditions of titanium dioxide on its morphology and cell toxicity properties

In this study, titanium dioxide nanoparticles (NPs) were synthesized using the home microwave method, and the effect of the microwave irradiation time on the structure of NPs was investigated. In addition, the morphological effect of these NPs on the toxicity of HDMSCs cells was investigated. The crystalline structure and morphology of the NPs were analyzed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and field emission scanning electron microscopy (FE-SEM); the cytotoxicity was determined by the methyl thiazolyl tetrazolium (MTT) assay. X-ray diffraction analysis revealed that all thin films had a polycrystalline nature with an anatase phase of TiO₂. It was also found that the crystallite size increased with increasing microwave radiation time. The FTIR spectrum showed Ti-O-Ti properties by the peak in the range between 527 and 580 cm^?1. Further, the FE-SEM images showed that the grain size increased with increasing irradiation time. The MTT assay results showed that the accumulation of NPs leads to toxicity.     

Photodimerization and photooxygenation of 9-vinylcarbazole catalyzed by titanium dioxide and magnesium perchlorate

<正>Photoreaction of 9-vinylcarbazole in acetonitrile in the presence of titanium dioxide and a catalytic amount of magnesium perchlorate gave 3,6-di(9-carbazolyl)-1,2-dioxane as a photooxygenated product via photodimerization of 9-vinylcarbazole.The photoreaction proceeds via an electron transfer mechanism,where magnesium perchlorate accelerated formation of the photo-oxygenated product.     

Voltammetric determination of catechol using a sonogel carbon electrode modified with nanostructured titanium dioxide

In this study, we investigate highly efficient sonogel carbon electrode (SGC/TiO₂) modified with nanostructured titanium dioxide synthesized via sol-gel method employing surfactant template for tailor-designing the structural properties of TiO₂. The stable SGC/TiO₂ electrode detects catechol, a neurotransmitter, in the presence of ascorbic acid, a common interferent, using cyclic voltammetry. A possible rationale for the stable catechol detection of SGC/TiO₂ electrode is attributed to most likely the adsorption of catechol onto highly porous TiO₂ (surface area of 147 m² g⁻¹ and porosity of 46.2%), and the formation of C₆H₄(OTi)₂ bond between catechol and TiO₂. The catechol absorbed onto TiO₂ rapidly reaches the SGC surface, then is oxidized, involving two electrons (e⁻) and two protons (H⁺). As a result, the surface of TiO₂ acts as an electron-transfer accelerator between the SGC electrode and catechol. In addition to the quantitative and qualitative detection of catechol, the SGC/TiO₂ electrode developed here meets the profitable features of electrode including mechanical stability, physical rigidity, and enhanced catalytic properties.     

Photocatalytic degradation of an azo reactive dye,Reactive Yellow 84, in water using an industrial titanium dioxide coated media

The photocatalytic degradation of an azo reactive dye, Reactive Yellow 84 (RY84), in aqueous solutions using industrial titanium dioxide coated non-woven paper was studied. The experiments were carried out to investigate the factors that influence the dye photocatalytic degradation, such as adsorption, initial concentration of dye, temperature, and solution pH. The experimental results show that adsorption is an important parameter controlling the apparent kinetics constant of degradation. The photocatalytic degradation rate was favored by a high concentration of solution in respect to Langmuir–Hinshelwood model. The degradation was enhanced by the temperature and was favored in acidic pH range.     

Photocatalytic activity of silver-modified titanium dioxide at solid–liquid and solid–gas interfaces

Silver-modified titania samples (Ag–TiO₂) with varying silver content (0.1–1.0 wt%) were prepared. Silver-modification of titanium dioxide was examined by TEM, XRD, XPS and DR-UV–vis spectroscopy. Ag or AgO_x particles on TiO₂ surface could not be observed by XRD and TEM investigation, however the color of the Ag–TiO₂ samples varied between light rose and purple-brown. XPS measurements revealed that silver exists mainly in oxide form. The photocatalytic activity of pure and Ag–TiO₂ samples were compared both in solid–liquid and in solid–gas interfaces. In the liquid phase the 2,2′-thiodiethanol was used as test molecule. Ethanol photodegradation was examined in gas phase at dry initial condition. It was shown that the rate of photooxidation of organic compounds significantly enhanced by silver-modification of titania.     

纳米多孔二氧化钛电极辅助光电化学降解乙酰氨基酚及伐昔洛韦

作为一类具有较高生物活性的物质,药物及个人护理品对环境的污染引起人们越来越多的关注.对乙酰氨基酚和伐昔洛韦是两种使用广泛的药物,由于其潜在的对人类健康和生态安全的威胁而逐渐成为研究热点.而电化学辅助光氧化技术因其具备能够高效处理难降解化学品的优点而得到广泛使用.本文合成了纳米多孔二氧化钛电极,研究了电化学还原处理对纳米多孔二氧化钛电极辅助光电化学降解对乙酰氨基酚和伐昔洛韦的影响.使用扫描电镜和色散谱技术对合成的纳米多孔二氧化钛电极的形态和元素组成进行了表征.循环伏安法、莫特-肖特基曲线、紫外-可见分光光度计和总有机碳分析仪被用来研究对乙酰氨基酚和伐昔洛韦的光电化学降解过程.结果显示,对乙酰氨基酚和伐昔洛韦的光化学降解和电化学降解过程非常缓慢,在研究的时间范围内其浓度未见明显变化,因此可以忽略不计.但是对乙酰氨基酚和伐昔洛韦的光电化学降解速度比较快,与未经处理的纳米多孔二氧化钛电极相比,经过电化学还原处理的电极可以使对乙酰氨基酚和伐昔洛韦的光电化学降解分别提高86.96%和53.12%.这可能是由于在电化学还原处理过程中生成了Ti3+, Ti2+和氧空位以及导电性的提高.还研究了温度对对乙酰氨基酚和伐昔洛韦光电化学降解的影响,随着温度升高,对乙酰氨基酚和伐昔洛韦的光电化学降解速率增大.     

Simultaneous separation of eight beta-adrenergic drugs using titanium dioxide nanoparticles as additive in capillary electrophoresis

The analysis is described for separating seven beta-adrenergic blocking agents (atenolol, celiprolol, clorprenaline, fenoterol, metoprolol, propranolol, terbutaline) and clenbuterol (sympathomimetic beta-2 receptor stimulating agonist, decongestant and bronchodilator, illicit anabolic used in athletics) by CE with UV detection. In order to simultaneously separate all analytes, Tris-H3PO4 solution was applied containing titanium dioxide nanoparticles (TiO2 NPs) as BGEs. The effects of important factors, such as concentration of TiO2 NPs, optimum pH, run buffer concentration, and separation voltage, were investigated so as to achieve best CE separation. The eight analytes could be well separated applying a separation voltage of 15 kV in 75 mM Tris-H3PO4 buffer at a pH of 2.40, containing 6.0 x 10(-6) g/mL TiO2 NPs. Under these optimal conditions, the RSDs for peak areas and for migration times were less than 2.7 and 2.3%, respectively. The detection limits were 0.1 microg/mL for celiprolol, 0.1 microg/mL for propranolol, 0.2 microg/mL for fenoterol, 1.0 microg/mL for atenolol, 1.0 microg/mL for clenbuterol, 1.0 microg/mL for clorprenaline, 1.0 microg/mL for metoprolol, and 1.0 microg/mL for terbutaline. The proposed method was successfully applied for the rapid CE determination of the frequently applied antihypertensive beta-blocking compounds atenolol, metoprolol, terbutaline, and propranolol in pharmaceutical tablets.     

A rapid and simple microwave-assisted digestion procedure for spectrophotometric determination of titanium dioxide photocatalyst on activated carbon

Deposition of titanium dioxide (TiO₂) on activated carbon (AC) surface has been widely utilized for the production of TiO₂/AC photocatalyst, which can be used in photo-degradation of pollutants. In this work, a fast and simple digestion procedure has been developed for the spectrophotometric quantitative analysis of TiO₂ in TiO₂/AC photocatalyst. Microwave-assisted digestion was used in the procedure. The microwave-digestion procedure was optimized using the single-variable method. Variables optimized included time of ashing, effective digestion time, volume and concentration of sulfuric acid, effect of adding a digestion catalyst, effect of sample pulverizing and on–off time cycle of the microwave. The analysis was completed spectrophotometrically after addition of hydrogen peroxide to the digested solution. Procedure precision and accuracy was tested by application to photocatalyst samples containing known amounts of TiO₂, and compared with previously published spectrophotometric procedures. The proposed microwave procedure was capable of recovering 98.4–101.1% of TiO₂ in the catalyst in less than 10 min, without the need for sample ashing. Analytical precision is 1.42–2.39% relative standard deviation (R.S.D.). In terms of accuracy and precision, the proposed microwave procedure was comparable with other procedures, but the proposed microwave procedure was superior in terms of shorter procedure duration.     

Synthesis and characterization of sulfur-titanium dioxide nanocomposites for photocatalytic oxidation of cyanide using visible light irradiation

A sol-gel method was used to prepare TiO2and sulfur-TiO2(S-TiO2)nanocomposites, which were characterized by N2 adsorption-desorption, X-ray diffraction, X-ray photoelectron spectroscopy, photoluminescene, ultraviolet visible and transmission electron microscopy measurements. The photocatalytic performance of TiO2 and S-TiO2nanocomposites, with respect to the photocatalytic oxidation of cyanide under visible light irradiation, was determined. The results reveal that S is well dispersed on the surface of TiO2 nanoparticles. Additionally, the surface area of the S-TiO2nano-composites was observed to be smaller than that of the TiO2nanoparticles because of blocked pores caused by doping with S. The S-TiO2nanocomposite (0.3 wt% S) exhibited the lowest band gap and the highest photocatalytic activity in the oxidation of cyanide. The photocatalytic performance of S-TiO2(0.3 wt% S) nanocomposites was stable, even after the fifth reuse of the nanoparticles for the oxidation of cyanide.     

Spatially resolved characterization of PEFCs using simultaneously neutron radiography and locally resolved impedance spectroscopy

A method for performing neutron radiography and locally resolved impedance spectroscopy simultaneously in situ in an operating polymer electrolyte fuel cell (PEFC) is presented. The new method provides concurrently spatially resolved information about the local cell performance, the locally limiting processes, and the liquid water distribution. Information about the impact of water on cell performance and limiting processes can be gained in situ on a local scale in an operating PEFC. The method was applied to a PEFC operated on pure H₂/O₂ in co-flow mode under low humidity operating conditions. The results show that in co-flow mode strong flooding and severe drying can occur at the very same time in different sections of a PEFC.     

Efficient hydrophobization and solvent microextraction for determination of trace nano-sized silver and titanium dioxide in natural waters

Hydrophobic silver and titanium (IV) oxide nanoparticles (commercial Ag and TiO₂ NPs with average particle sizes of 17 and 19 nm, respectively) were quantitatively transferred into organic phase in natural water samples. Five NP surface modification and solvent extraction agents (reagents) types, mercaptocarboxylic acid, alkylamine, mediator solvent, extraction solvent, and surfactant, were investigated and optimized with three-level orthogonal array design (OAD), an OA₂₇ (3¹³) matrix. The most favorable reagents and experimental conditions were then examined. The best extraction efficiencies of 78.6 and 73.7% were obtained for 1 mg L⁻¹ citrate-stabilized Ag and TiO₂ NPs, respectively, with 0.5 mM of 11-mercaptoundecanoic acid, 1.5 mM of octadecylamine, 1 mL of methanol, 150 μL of cyclohexane, 0.05 mM of tetra-n-octylammonium bromide, pH = 8.0, adsorption time of 2 h, sonication time of 3 min, and centrifugation time of 10 min. Enrichment factors were 97 and 83, for Ag and TiO₂ NPs, respectively. The optimum extraction conditions were successfully applied to genuine water samples at spiking levels of 2–100 μg L⁻¹ of Ag and TiO₂ NPs. The relative recoveries of (69.0–85.1)% and (61.5–78.5)% were obtained for Ag and TiO₂ NPs, respectively. The extracted surface-modified NPs were characterized with transmission electron microscopy, selected area electron diffraction, energy-dispersive X-ray, ultraviolet–visible, and Fourier transform infrared spectroscopic techniques. Based on the results, efficient ligand exchange and acid–base pair formation were observed on the NP surface without significant change in its original properties. The organic phase was microwave digested, and analyzed with inductively coupled plasma (ICP) optical emission spectroscopy and ICP mass spectrometry (ICP-MS). Detection limits of ICP-MS analyses of Ag and TiO₂ NPs were 0.02 and 0.07 μg L⁻¹, respectively.