Emodin-8-O-β-D-glucoside from Polygonum amplexicaule D. Don var. sinense Forb. promotes proliferation and differentiation of osteoblastic MC3T3-E1 cells

Polygonum amplexicaule D. Don var. sinense Forb. (Polygonaceae) (PAF) is a famous traditional herb used to treat fractures, rheumatoid arthritis, muscle injury and pain. The present study was designed to investigate a PAF derived-chemical compound emodin-8-O-β-D-glucoside (EG) on the proliferation and differentiation of osteoblastic MC3T3-E1 cell in vitro. A compound was isolated from PAF extract by HPLC and identified as emodin-8-O-β-D-glucoside (EG) by spectroscopic methods. EG significantly promoted cell proliferation at 0.1-100 ng/mL, and increased the cell proportion in S-phase from 16.34% to 32.16%. Moreover, EG increased alkaline phosphatase (ALP) expression in MC3T3-E1 cells at the concentration from 0.1 to 100 ng/mL and inhibited PGE(2 )production induced by TNF-α in osteoblasts at the concentrations ranging from 10-100 ng/mL, suggesting that cell differentiation was induced in MC3T3-E1 osteoblasts. Taken together, these results indicated compound EG directly stimulated cell proliferation and differentiation of osteoblasts, therefore this study preliminarily explored the pharmacological mechanism of PAF to promote the healing of bone rheumatism and various fractures.     

Effects of combined mechanical stimulation on the proliferation and differentiation of pre-osteoblasts

We observed how combined mechanical stimuli affect the proliferation and differentiation of pre-osteoblasts. For this research, a bioreactor system was developed that can simultaneously stimulate cells with cyclic strain and ultrasound, each of which is known to effectively stimulate bone tissue regeneration. MC3T3-E1 pre-osteoblasts were chosen for bone tissue engineering due to their osteoblast-like characteristics. 3-D scaffolds were fabricated with polycaprolactone and poly-L-lactic acid using the salt leaching method. The cells were stimulated by the bioreactor with cyclic strain and ultrasound. The bioreactor was set at a frequency of 1.0 Hz and 10 % strain for cyclic strain and 1.0 MHz and 30 mW/cm(2) for ultrasound. Three experimental groups (ultrasound, cyclic strain, and combined stimulation) and a control group were examined. Each group was stimulated for 20 min/day. Mechanical stimuli did not affect MC3T3-E1 cell proliferation significantly up to 10 days when measured with the cell counting kit-8. However, gene expression analysis of collagen type-I, osteocalcin, RUNX2, and osterix revealed that the combined mechanical stimulation accelerated the matrix maturation of MC3T3-E1 cells. These results indicate that the combined mechanical stimulation can enhance the differentiation of pre-osteoblasts more efficiently than simple stimuli, in spite of no effect on cell proliferation.     

In vitro Degradation and Biocompatibility of Ca-P Coated Magnesium Alloy

Calcium-phosphate compounds(Ca-P) coating was prepared on an Mg-Al alloy(AZ60). Biodegradation of Ca-P coated magnesium alloy was evaluated in simulated body fluid(SBF) by examining the changes in magnesium ion concentration and pH value, which indicated that the Ca-P coating on magnesium alloy strongly affected the corrosion of magnesium alloy. Osteoblast MC3T3-E1 cells were utilized to investigate the cellular cytocompatibility. The cytocompatibility was measured by carrying out a series of tests, such as cholecystokinin-octapeptide(CCK-8) test, alkaline phosphatase activity(ALP) test, cellular morphology of hematoxylin-eosin(HE) staining and the induction of apoptosis. It was found that the cell function showed better in the Ca-P coated Mg-alloy extract than in the uncoated magnesium alloy extract. In summary, the results indicate that the Ca-P coating can improve the corrosion resistance of magnesium alloy and elevate cellular proliferation and differentiation of osteoblast MC3T3-E1 cells.     

Regulation of cellular responses to macroporous inorganic films prepared by the inverse-opal method

Regenerative medicine for repairing damaged body tissues has recently become critically important. Cell culture scaffolds are required for the control of cell attachment, proliferation, and differentiation in in vitro cell cultures. A new strategy to control cell adhesion, morphology, and proliferation was developed by culturing mouse osteoblast-like MC3T3-E1 cells on novel cell culture scaffolds fabricated using ordered nanometer-sized pores (100, 300, 500, and 1000 nm). Results of this study indicate that after 72 h of incubation, the number of cells cultured on a silica film with a pore size of 1000 nm was similar to or slightly lower than that cultured on a non-porous control silica film. Films with 100-500 nm pore sizes, however, resulted in the cell growth inhibition. Morphology of the cultured cells revealed increased elongation and the formation of actin stress fibers was virtually absent on macroporous silica films with 100-500 nm pore size. Vinculin molecules expressed in cells cultured on the non-porous silica films showed many clear focal adhesions, whereas focal contacts were insufficiently formed in cells cultured on macroporous films. The influence of hydroxyapatite (HAp) and alumina scaffolds on the behavior of MC3T3-E1 cells was also evaluated. The proliferation rate of MC3T3-E1 cells cultured on HAp films with 1000 nm pore size was increased to approximately 20% above than that obtained of cells cultured on non-porous HAp films. These results demonstrate that the pore size and constituents of films play a role in controlling the morphology and proliferation rate of MC3T3-E1 cells.     

MC3T3-E1 cell adhesion to hydroxyapatite with adsorbed bone sialoprotein, bone osteopontin, and bovine serum albumin

Native bone tissue is composed of a complex matrix of collagen, non-collagenous proteins, and hydroxyapatite (HAP). Bone sialoprotein (BSP) and bone osteopontin (OPN) are members of the non-collagenous protein family termed the SIBLING (small integrin-binding ligand, N-linked glycoproteins) proteins, which are primarily found in mineralized tissues. Previously, OPN was shown to exhibit a preferential orientation for MC3T3-E1 cell adhesion when it was specifically bound to collagen, while the MC3T3-E1 cell adhesion was shown to be dependant on the conformational flexibility of BSP specifically bound to collagen. Additionally, OPN was shown to play a greater role than BSP for cell binding to collagen. In this work, the orientations and conformations of BSP and OPN specifically bound to HAP are probed under similar conditions. Radiolabeled adsorption isotherms were obtained for BSP and OPN on HAP formed from a simulated body fluid, and the results show that HAP has the capacity to bind significantly more BSP than OPN. An in vitro MC3T3-E1 cell adhesion assay was then performed to compare the cell binding ability of adsorbed BSP and OPN specifically bound to HAP. It was found that there is a preference for cell binding to HAP with adsorbed BSP as compared to OPN, but not to a statistically significant level. However, the maximum cell binding was observed on HAP substrates with adsorbed heat denatured bovine serum albumin (BSA). The influence of BSA on cell binding was shown to be concentration dependant and it is believed that the adsorbed BSA modulates the proliferation state of the bound cells.     

An MC3T3-E1 Cell Line Biomembrane Extraction and HPLC–ESI-MS n Method for Simultaneous Analysis of Potential Anti-Osteoporosis Components of Epimedium koreanum

Aerial parts of Epimedium koreanum Nakai have been used as Herba Epimedii in China. Its anti-osteoporosis effect has attracted much attention in recent years. In this study, a method involving osteoblastic cell (MC3T3-E1 cell line) extraction and high-performance liquid chromatography–electrospray ionisation–mass spectrometry (HPLC–ESI-MS ⁿ ) was developed for screening of potential anti-osteoporosis agents in E.?koreanum. Four compounds identified as epimedin?A, epimedin?B, epimedin?C and icariin were found to interact with MC3T3-E1 cells and possessed potent osteoblast-stimulating activity as evaluated by cell proliferation [3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay] and differentiation [alkaline phosphatase (ALP) activity and Ca content] in?vitro. The results suggest that these four flavonoids are the anti-osteoporosis constituents of Herba Epimedii and that the method combining MC3T3-E1 cell extraction with HPLC–ESI-MS ⁿ is rapid and effective in screening anti-osteoporosis agents from traditional Chinese medicines.     

与胶原特异性结合的BMP2模拟肽/PLGA 3D打印复合支架的制备及成骨诱导活性

将胶原绑定结构域(CBD)多肽序列与骨形态发生蛋白2模拟肽(BMP2-MP)序列连接制备具有胶原绑定能力的CBD-BMP2-MP, 再将CBD-BMP2-MP与聚丙交酯-乙交酯/胶原(PLGA/COL)3D打印支架相结合, 以支架表面的胶原成分为媒介, 将CBD-BMP2-MP更有效地固定于骨修复材料上, 达到对其进行改性的目的. 利用扫描电子显微镜(SEM)、 电子万能试验机和接触角测量仪对复合支架表面形貌、 力学强度和亲水性等材料学性能进行评价. 用荧光成像法评测 CBD-BMP2-MP及BMP2-MP与支架材料的结合能力. 在各组支架材料表面接种MC3T3-E1细胞进行体外培养, 采用CCK-8、 鬼笔环肽荧光染色、 茜素红染色及qPCR综合评价细胞在材料表面的黏附、 增殖和成骨分化等细胞行为, 研究CBD-BMP2-MP修饰的3D多孔PLGA/COL复合支架的生物学性能. 研究结果表明, 利用3D打印技术制备的多孔支架具有形貌可控的孔隙结构, 为细胞生长创造更有利的细胞微环境, 支架表面胶原成分的加入提高了支架材料的亲水性, 同时对支架材料本身的力学性能无任何影响, 提高了复合支架本身的生物相容性. 与普通BMP2-MP相比, CBD-BMP2-MP具有更好的胶原绑定能力, 与复合支架的结合更稳定, 提高了PLGA/COL复合支架对BMP2-MP的负载能力. 支架表面负载CBD-BMP2-MP后具有极强的促细胞成骨分化能力. MC3T3-E1细胞表现出更高的钙沉积能力, 并且成骨分化相关基因Runx2, ALP, COL-I及OPN等水平也有了明显提升. 表明CBD-BMP2-MP多孔复合支架具有良好的生物相容性和成骨诱导活性, 在骨组织修复领域具有良好的应用前景.     

Improvement of differentiation and mineralization of pre-osteoblasts on composite nanofibers of poly(lactic acid) and nanosized bovine bone powder

The effect of NBM incorporation in PLA nanofibers on their mechanical properties and the differentiation and mineralization of osteoblasts was studied. At 20% NBM, the Young's modulus of the nanofibers was 37.78 +/- 4.23, significantly larger than that of pure PLA nanofibers. MC3T3-E1 pre-osteoblasts attached to both types of nanofibers and developed full osteogenic phenotypes. A profound effect of NBM on the mineralization of MC3T3-E1 pre-osteoblasts was confirmed, suggesting that NBM/PLA composite nanofibers exhibit properties similar to those of the native collagen-rich mineralized bone matrix, and could therefore serve as a temporary substrate for facilitating the differentiation and mineralization of bone-forming cells.     

In vitro Evaluation of Osteoblast Response to Sol-Gel Derived Gelatin-Siloxane Hybrids

Cytotoxicity and cytocompatibility of porous gelatin-siloxane hybrids were evaluated due to osteoblastic cell (MC3T3-E1) proliferation, ALP activity, or their responses to the hybrids and their extracts. The hybrids were found intoxic, and appropriate incorporation of calcium ions stimulated proliferation and differentiation in vitro. Cells were seeded into the porous hybrids and the cell morphology was studied. The hybrids involving calcium ions favored osteoblast growth and differentiation.     

An MC3T3-E1 Cell Line Biomembrane Extraction and HPLC–ESI-MS n Method for Simultaneous Analysis of Potential Anti-Osteoporosis Components of Epimedium koreanum

Aerial parts of Epimedium koreanum Nakai have been used as Herba Epimedii in China. Its anti-osteoporosis effect has attracted much attention in recent years. In this study, a method involving osteoblastic cell (MC3T3-E1 cell line) extraction and high-performance liquid chromatography–electrospray ionisation–mass spectrometry (HPLC–ESI-MSⁿ) was developed for screening of potential anti-osteoporosis agents in E. koreanum. Four compounds identified as epimedin A, epimedin B, epimedin C and icariin were found to interact with MC3T3-E1 cells and possessed potent osteoblast-stimulating activity as evaluated by cell proliferation [3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay] and differentiation [alkaline phosphatase (ALP) activity and Ca content] in vitro. The results suggest that these four flavonoids are the anti-osteoporosis constituents of Herba Epimedii and that the method combining MC3T3-E1 cell extraction with HPLC–ESI-MSⁿ is rapid and effective in screening anti-osteoporosis agents from traditional Chinese medicines.

     

Chemical constituents from the leaves of Manglietia phuthoensis and their effects on osteoblastic MC3T3-E1 cells

Two new phenyl glycosides, mangliesides A and B (1, 2), a new ionol glycoside, manglieside C (3), two new lignan glycosides, mangliesides D and E (4, 5), were isolated from the leaves of Manglietia phuthoensis, along with two known lignans, 3-methoxymagnolol (6) and obovatol (7). Their structures were established by means of 1D and 2D NMR, electrospray ionization (ESI)-MS and HR-ESI-MS experiments. Among them, compounds 2 and 5 significantly (p<0.05) increased the growth and differentiation of osteoblastic MC3T3-E1 cells in vitro.     

Protection by the flavonoids quercetin and luteolin against peroxide- or menadione-induced oxidative stress in MC3T3-E1 osteoblast cells

Potential protective effects of the flavonoids quercetin and luteolin have been examined against the oxidative stress of MC3T3-E1 osteoblast-like cells. Although hydrogen peroxide and menadione reduced cell viability, the toxicity was prevented by desferrioxamine or catalase but not superoxide dismutase, suggesting the involvement of hydrogen peroxide in both cases. Quercetin and luteolin reduced the oxidative damage, especially that caused by hydrogen peroxide. When cultures were pre-incubated with quercetin or luteolin, protection was reduced or lost. Protection was also reduced when a 24 h pre-incubation with the flavonoids was followed by exposure to menadione alone. Pretreating cultures with luteolin impaired protection by quercetin, whereas quercetin pretreatment did not affect protection by luteolin. It is concluded that quercetin and luteolin suppress oxidative damage to MC3T3-E1 cells, especially caused by peroxide. The reduction in protection by pretreatment implies a down-regulation of part of the toxic transduction pathway.     

Amphirionin-5, a novel linear polyketide from a cultured marine dinoflagellate Amphidinium species with a potent cell proliferation-promoting activity

A novel linear polyketide, amphirionin-5 (1), has been isolated from the cultivated algal cells of the benthic dinoflagellate Amphidinium sp. (strain KCA09053), and the structure was elucidated on the basis of detailed analyses of 1D and 2D NMR data. Amphirionin-5 (1) resulted in a 282% increase in the proliferation of murine bone-marrow derived stromal ST-2 cells and 320% increase in the proliferation of murine osteoblastic MC3T3-E1 cells.     

K-Carrageenan Stimulates Pre-Osteoblast Proliferation and Osteogenic Differentiation: A Potential Factor for the Promotion of Bone Regeneration?

Current cell-based bone tissue regeneration strategies cannot cover large bone defects. K-carrageenan is a highly hydrophilic and biocompatible seaweed-derived sulfated polysaccharide, that has been proposed as a promising candidate for tissue engineering applications. Whether κ-carrageenan can be used to enhance bone regeneration is still unclear. In this study, we aimed to investigate whether κ-carrageenan has osteogenic potential by testing its effect on pre-osteoblast proliferation and osteogenic differentiation in vitro. Treatment with κ-carrageenan (0.5 and 2 mg/mL) increased both MC3T3-E1 pre-osteoblast adhesion and spreading at 1 h. K-carrageenan (0.125–2 mg/mL) dose-dependently increased pre-osteoblast proliferation and metabolic activity, with a maximum effect at 2 mg/mL at day three. K-carrageenan (0.5 and 2 mg/mL) increased osteogenic differentiation, as shown by enhanced alkaline phosphatase activity (1.8-fold increase at 2 mg/mL) at day four, and matrix mineralization (6.2-fold increase at 2 mg/mL) at day 21. K-carrageenan enhanced osteogenic gene expression (Opn, Dmp1, and Mepe) at day 14 and 21. In conclusion, κ-carrageenan promoted MC3T3-E1 pre-osteoblast adhesion and spreading, metabolic activity, proliferation, and osteogenic differentiation, suggesting that κ-carrageenan is a potential osteogenic inductive factor for clinical application to enhance bone regeneration.     

Levan polysaccharide from Erwinia herbicola protects osteoblast cells against lipopolysaccharide-triggered inflammation and oxidative stress through regulation of ChemR23 for prevention of osteoporosis

Osteoblast cell injury is a type of degenerative disorder characterized by osteolysis. Levan polysaccharide is an active component of Erwinia herbicola, which shows potential anti-inflammatory and antioxidant properties. However, the protective effects of levan on lipopolysaccharide (LPS)-induced inflammatory and oxidative stress injury in osteoblast cells as an in vitro model of osteolysis remain largely unknown. The present study aimed to explore the functions of levan in LPS-triggered inflammation and oxidative stress in osteoblast cells (MC3T3-E1). The protective effects of levan on LPS-induced inflammatory and oxidative stress responses in MC3T3-E1 cells were assessed by quantification of superoxide dismutase (SOD) and catalase (CAT) activity as well as enzyme-linked immunosorbent assay (ELISA) for determination of interleukin-6 (IL-6) and tumor necrosis factor-α (TNF-α). Also, the key signaling pathway of ChemR23 was determined by qPCR analysis. Results showed that levan significantly alleviated LPS-induced deactivation of SOD and CAT activity. Levan also downregulated the expression of IL-6, TNF-α, and ChemR23 at mRNA level. These findings indicated that levan may protect MC3T3-E1 cells against LPS-triggered oxidative stress, and inflammation via regulation of ChemR23. This data may provide a potential basis for further clinical investigation of levan in the prevention and treatment of LPS-triggered bone resorption and osteolysis.     

Effect of extracts from safflower seeds on osteoblast differentiation and intracellular calcium ion concentration in MC3T3-E1 cells

Although safflower seeds have long been used in Korea as herbal medicines, very little research has been published on the effects of safflower seed on bone formation or bone density. The study reported here therefore examined bone nodule formation, calcium uptake, alkaline phosphatase activity, and intracellular concentration of calcium ion [Ca(2+)](i) in murine osteoblastic cells of the MC3T3-E1 line that were cultured on modified Eagle's minimal essential medium alone (controls) or with addition of 0.1% crude extract of safflower seed (experimental group I) or 0.1% aqueous fraction of safflower seed (experimental group II). Fluorescence spectrometry measurement of ([Ca(2+)](i)) showed significantly accelerated rates of osteoblast differentiation in experimental group I (3 microL of crude extract in 8 x 10(4) cells) and experimental group II (2 microL of aqueous fraction in 8 x 10(4) cells) compared to the control group.     

Compatibility of mammalian cells on surfaces of poly(dimethylsiloxane)

This paper describes the influence of the composition of poly(dimethylsiloxane) (PDMS) on the attachment and growth of several different types of mammalian cells: primary human umbilical artery endothelial cells (HUAECs), transformed 3T3 fibroblasts (3T3s), transformed osteoblast-like MC3T3-E1 cells, and HeLa (transformed epithelial) cells. Cells grew on PDMS having different ratios of base to curing agent: 10:1 (normal PDMS, PDMSN), 10:3 (PDMSCA), and 10:0.5 (PDMSB). They were also grown on "extracted PDMS" (normal PDMS that has reduced quantities of low molecular-weight oligomers, PDMSN,EX) and normal PDMS that had been extracted and then oxidized (PDMSN,EX,OX); all surfaces were exposed to a solution of fibronectin prior to cell attachment. Generally, fibronectin-coated PDMS is a suitable substrate for culturing mammalian cells. Compatibility of cells on some surfaces, however, was dependent on the cell type: PDMSN,EX,OX caused cell detachment of 3T3 fibroblasts and MC3T3-E1 cells, and PDMSCA caused detachment of HUAECs and HeLa cells. Growth of cells on PDMSN, PDMSN,EX, and PDMSB was comparable to growth on tissue culture-treated polystyrene for most of the cell types. All cells grew at similar rates on PDMS substrates regardless of the stiffness of the substrate, for substrates having Young's moduli ranging from E=0.60 +/- 0.04 to 2.6 +/- 0.2 MPa (for PDMSB and PDMSN,EX, respectively).     

Poly(ε-caprolactone)-banded spherulites and interaction with MC3T3-E1 cells

We report that protein adsorption, cell attachment, and cell proliferation were enhanced on spherulites-roughened polymer surfaces. Banded spherulites with concentric alternating succession of ridges and valleys were observed on spin-coated thin films of poly(ε-caprolactone) (PCL) and two series of PCL binary homoblends composed of high- and low-molecular-weight components when they were isothermally crystallized at 25-52 °C. Their thermal properties, crystallization kinetics, and surface morphology were examined. The melting temperature (T(m)), crystallinity (χ(c)), crystallization rate, and spherulitic patterns showed strong dependence on the crystallization temperature (T(c)) and the blend composition. The surface roughness of the spherulites was higher when T(c) was higher; thus, the larger surface area formed in banded spherulites could adsorb more serum proteins from cell culture media. In vitro mouse preosteoblastic MC3T3-E1 cell attachment, proliferation, and nuclear localization were assessed on the hot-compressed flat disks and spherulites-roughened films of the high-molecular-weight PCL and one of its homoblends. The number of attached MC3T3-E1 cells and the proliferation rate were greater on the rougher surfaces than those on the flat ones. It is interesting to note that cell nuclei were preferentially, though not absolutely, located in or close to the valleys of the banded spherulites. The percentage of cell nuclei in the valleys was higher than 78% when the ridge height and adjacent ridge distance were ~350 and ~35 nm, respectively. This preference was weaker when the ridge height was lower or at a higher cell density. These results suggest that isothermal crystallization of semicrystalline polymers can be an effective thermal treatment method to achieve controllable surface roughness and pattern for regulating cell behaviors in tissue-engineering applications.