基于Parylene C的单触发开关性能实验研究

为了研制具有高导通电流和高导通速率能力的单触发开关,利用微加工技术制备了基于Parylene C的三明治结构单触发开关。在主回路充电电压1.0 ~1.6 kV的范围内,分析了开关触发回路电流、电压特性,导通峰值电流、上升时间、开关延迟时间,并且对单触发开关的电感、电阻做了估算。结果表明,基于Parylene C的单触发开关性能优于基于聚酰亚胺的单触发开关;随着开关加载电压的升高,开关导通的峰值电流呈现不断增大的趋势,但是上升时间几乎不变,其延迟时间分布在1~200 s之间,呈随机性分布,开关电阻随其作用时间增加不断增大。     

Preparation and characterization of antibacterial Au/C core-shell composite

An environment-friendly oxidation-reduction method was used to prepare Au/C core-shell composite using carbon as core and gold as shell. The chemical structures and morphologies of Au/C core-shell composite and carbon sphere were characterized by X-ray diffraction, transmission electron microscope, energy dispersion X-ray spectrometry (EDS) and X-ray photoelectron spectroscopy (XPS). The antibacterial properties of the Au/C core-shell composite against Escherichia coli (E. coli), Staphylococcus aureus (S. aureus) and Candida albicans (C. albicans) were examined by the disk diffusion assay and minimal inhibition concentration (MIC) methods. In addition, antibacterial ability of Au/C core-shell composite was observed by atomic force microscope. Results demonstrated that gold homogeneously supported on the surface of carbon spheres without aggregation and showed efficient antibacterial abilities.     

Synthesis of transparent BaTiO3 nanoparticle/polymer composite film using DC field

Transparent BaTiO₃ nanoparticle/polymer composite films were synthesized from titanium-organic film and barium ion in aqueous solution under direct current (DC) field. Titanium-organic precursor was synthesized from titanium isopropoxide, acetylacetone and methacrylate derivative. The UV treatment was effective to increase the anti-solubility of the titanium-organic film during DC processing. BaTiO₃ nanoparticles were crystallized in the precursor films on stainless substrates without high temperature process, as low as 40°C. The crystallite size of BaTiO₃ increased with increasing reaction temperature from 40 to 50 °C at 3.0 V/cm. BaTiO₃ nanoparticles also grew in size with increasing reaction time from 15 min to 45 min at 3.0 V/cm and 50 °C. Transparent BaTiO₃ nanoparticle/polymer films were synthesized on stainless substrates at 3.0 V/cm and 50°C for 45 min.     

Synthesis and characterization of silver-polypyrrole film composite

In this work, we report the chemical polymerization of pyrrole to obtain thin film of polypyrrole (PPy) hydrochloride deposited onto the electrode of the quartz crystal microbalance (QCM). The film in the base form was exposed to a solution of AgNO₃. Electroless reduction for silver ions by the PPy film took place and silver particles were adsorbed onto the film surface. The silver particles content at the PPy films were analyzed by QCM and the results showed that the concentrations of silver uptakes increase as the original AgNO₃ solution increases. The morphology of the surface of the PPy film and the silver-PPy film composite were studied by the scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectrometry (EDX). They showed that the obtained silver particles have spherical, cubic and tetrahedral structures. X-ray diffraction (XRD) and Fourier transformed infra-red spectroscopy (FTIR) were used to characterize the structure of the powder composite. This work reveals the capability of PPy film coating on QCM in sensing and removing silver from several environmental samples.     

Preparation and characterization of aligned carbon nanotubes/polylactic acid composite fibers

Aligned functionalized multiwalled carbon nanotubes/polylactic acid (MWNTs-PCL/PLA) composite fibers were successfully prepared by electrospinning processing. The MWNTs bonded with the polycaprolactone chains exhibited excellent uniform dispersion in PLA solution by comparing with the acid-functionalized MWNTs and amino-functionalized MWNTs. Optical microscopy was used to study the aligned degree of the fibers and to investigate the influences of the electrodes distance on the alignment and structure of the fibers, and results showed that the best quality of aligned fibers with dense structure and high aligned degree were obtained at an electrodes distance of 3 cm. Moreover, the MWNTs embedded inside the MWNTs-PCL/PLA fibers displayed well orientation along the axes of the fibers, which was demonstrated by field emission scanning electron microscopy, transmission electron microscopy and Raman spectroscopy.     

Synthesis and characterization of Ag/BiVO4 composite photocatalyst

Ag/BiVO₄ composite photocatalysts were hydrothermal synthesized and characterized by XRD, SEM, XPS and DRS techniques. Their photocatalytic activities were determined by oxidative decomposition of methyl orange in aqueous solution under visible light irradiation. It revealed that the doped Ag species greatly improved the visible light absorption abilities and morphologies of the composites, and thus lead to enhanced photocatalytic activities compared with that of the pure BiVO₄.     

Synthesis and morphology evolution of GaN/C nanocables

GaN/C nanocables were synthesized via a thermochemical process. The GaN/C nanocables were composed of single crystalline GaN nanowire cores with a mean diameter of 80 nm and parallel carbon sheathes with a thickness of several nanometers. We find that GaN nanocables were partially evolved into waved GaN nanowires and discontinuously ordered nanodots within the carbon sheaths due to the decomposition of GaN at high temperature regions. Both the carbon sheathes and GaN nanowire cores show a high degree of crystalline perfection. This method may be applied to coat a wide range of nanostructures with carbon sheathes and prepare various hetrostructures, which may serve as potential building blocks in nanodevices.     

Effect of flexibility of grafted polymer on the morphology and property of nanosilica/PVC composites

In this study, poly(methyl methacrylate)-grafted-nanosilica (PMMA-g-silica) and a copolymer of styrene (St), n-butyl acrylate (BA) and acrylic acid (AA)-grafted-nanosilica (PSBA-g-silica) hybrid nanoparticles were prepared by using a heterophase polymerization technique in an aqueous system. The grafted polymers made up approximately 50 wt.% of the resulted hybrid nanoparticles which showed a spherical and well-dispersed morphology. The silica hybrid nanoparticles were subsequently used as fillers in a poly(vinyl chloride) (PVC) matrix to fabricate PVC nanocomposite. Morphology study of PVC nanocomposites revealed that both PMMA- and PSBA-grafted-silica had an adhesive interface between the silica and PVC. The tensile strength and elongation to break were found to be improved significantly in comparison with that of untreated nanosilica/PVC composites. Finally our results clearly demonstrated that the properties (e.g. chain flexibility, composition) of the grafted polymer in the hybrid nanoparticles could significantly affect the dispersion behavior of hybrid nanoparticles in PVC matrix, dynamic mechanical thermal properties and mechanical properties of the resulted PVC composites.     

Preparation and characterization of NiFe2O4/NiO composite film via a single-source precursor route

NiFe₂O₄/NiO nanocomposite thin films have been successfully prepared through a facile route using nickel iron layered double hydroxide (NiFe-LDH) as a single-source precursor. This synthetic approach mainly involves the formation of NiFe-LDH film by casting the slurry of NiFe-LDH precursor on the α-Al₂O₃ substrate, followed by high-temperature calcination. The composition, microstructure and properties of the films were characterized in detail by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDX) and vibrating sample magnetometer (VSM). The results indicate that NiFe₂O₄/NiO composite film was composed of granules with diameter less than 100 nm, and the thickness of the film was in the range 1-2 μm. The magnetization of the film can be tuned by alternating the Ni/Fe molar ratio of LDH precursor. In addition, the method developed should be easily extended to fabricate other MFe₂O₄/MO composite film systems with specific applications just by an appropriate combination of divalent/trivalent composition in the precursor of LDHs.     

Dielectric properties of nano Si/C/N composite powder and nano SiC powder at high frequencies

The dielectric properties of nano Si/C/N composite powder and nano SiC powder at high frequencies have been studied. The nano Si/C/N composite powder and nano SiC powder were synthesized from hexamethyldisilazane ((Me₃Si)₂NH) (Me:CH₃) and SiH₄–C₂H₂, respectively, by a laser-induced gas-phase reaction. The complex permittivities of the nano Si/C/N composite powder and nano SiC powder were measured at a frequency range of 8.2–12.4 GHz. The real part (′) and imaginary part (″) of the complex permittivity, and dissipation factor (tg δ=″/′) of nano Si/C/N composite powder are much higher than those of nano SiC powder and bulk SiC, Si₃N₄, SiO₂, and Si, especially the tg δ. The promising features of nano Si/C/N composite powder would be due to more complicated Si, C, and N atomic chemical environment than in a mixture of pure SiC and Si₃N₄ phase. The charged defects and quasi-free electrons moved in response to the electric field, diffusion or polarization current resulted from the field propagation. Because there exists graphite in the nano Si/C/N composite powder, some charge carries are related to the sp³ dangling bonds (of silicon and carbon) and unsaturated sp² carbons. The high ″ and tg δ of nano Si/C/N composite powder were due to the dielectric relaxation. The nano Si/C/N composite powder would be a good candidate for electromagnetic interface shielding material.     

Synthesis and characterization of brookite/anatase complex thin film

TiO₂ films were prepared on a silicon or soda-glass substrate using a sol suspension. The TiO₂ film on the silicon substrate was composed of pure anatase phase and showed almost no contaminations. In contrast, the TiO₂ film on the soda-glass substrate was composed of anatase and brookite phases. The diffusion of Na into the TiO₂ film on the soda-glass substrate was observed by XPS, and Na was concentrated on the surface of the film. The yield of the brookite phase increased with decreasing distance from the surface of the film on the soda-glass substrate. Na promoted the formation of the brookite phase, although the preparative procedure was used for anatase synthesis.     

石墨电弧放电过程中C60/C70的形成与氧化

本文用红外吸收光谱法研究发现,在用石墨电弧放电法制备Ｃ６０／Ｃ７０的过程中,有大量的Ｃ６０／Ｃ７０氧化物生成。该氧化物具有半导体特性和真空中热稳定性好的优点。     

新型C60衍生物／Ag复合纳米材料的制备及光谱性质

利用1,3-偶极环加成反应合成了联吡啶基C60单加成衍生物N-甲基-2-[4′-(4″-甲基-2′,2″-联吡啶基)]-3,4-C60吡咯烷(C60BPY),并用NaBH4还原法和银溶胶直接组装法制备了C60BPY/Ag复合纳米结构。透射电子显微镜(TEM)表明,两种复合纳米结构的粒子粒径分别在30~45nm和40~55nm之间,粒子形状较规则,且分散性较好。在复合纳米结构形成过程中,C60BPY分子有效地控制了银粒子的生长和团聚,起到了很好的稳定和分散作用。紫外-可见吸收光谱中,两种复合纳米结构分别在430和490nm处出现了银纳米粒子的表面等离子体共振吸收峰,说明随着粒径的增大,吸收峰发生了红移。荧光发射光谱显示,C60BPY/Ag复合纳米体系猝灭了C60BPY在720和805nm处的发射峰,并对其机理进行了探讨。这种复合纳米体系有望在光电器件、传感器及催化领域有潜在的应用前景。     

Electro-oxidation of ethylene glycol on PtSn/C and PtSnNi/C electrocatalysts

A PtSn/C electrocatalyst with a Pt–Sn molar ratio of 50:50 and A PtSnNi/C electrocatalyst with a Pt–Sn–Ni molar ratio of 50:40:10 were prepared by alcohol-reduction process using ethylene glycol as solvent and reducing agent. The electrocatalysts were characterized by energy dispersive X-ray, X-ray diffraction, and cyclic voltammetry. The electro-oxidation of ethylene glycol was studied by cyclic voltammetry and chronoamperometry using the thin porous coating technique. PtSnNi/C electrocatalyst showed a superior performance compared to PtSn/C electrocatalysts in the potential range of interest for a direct ethylene glycol fuel cell.     

Synthesis, characterization and infrared emissivity study of polyurethane/TiO2 nanocomposites

In this study, polyurethane/titania (PU/TiO₂) nanocomposites were prepared in ultrasonic process and characterized by fourier transform IR spectroscopy (FT-IR), powder X-ray diffraction (XRD), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), transmission electron microscopy (TEM), scanning electron microscopy (SEM) and infrared emissivity analysis. The TEM and SEM results indicated that the nanoparticles were dispersed homogeneously in PU matrix on nanoscale. TGA-DSC confirmed that the heat stability of the composite was improved. Infrared emissivity study showed that the nanocomposite possessed lower emissivity value than those values of pure polymer and nanoparticles.     

Synthesis of ZnO-SnO2 composite oxides by CTAB-assisted co-precipitation and photocatalytic properties

ZnO-SnO₂ composite oxides with various molar ratios of Sn:Zn have been synthesized at different calcination temperatures via a facile cetyltrimethylammonium bromide (CTAB)-assisted co-precipitation method with Zn(NO₃)₂·6H₂O and SnCl₄·5H₂O as starting materials. XRD, TEM, SEM and BET were employed to characterize the as-prepared samples. It has been found that amorphous intermediates appear between the evolutions of ZnO and SnO₂ crystals. The photocatalytic properties of the composite oxides were investigated using photocatalytic degradation of methyl orange as the probe reaction. The results show that the ZnO-SnO₂ composite oxide with a cube morphology exhibits the best photocatalytic activity, which was prepared with a molar ratio of Zn:Sn of 2:1 and calcination temperature of 700 °C.     

退火重结晶制备AlN/C复合泡沫材料及其力学性能研究

为了得到一种轻质、高强度、耐烧灼的新型碳泡沫材料,以无定形AlN为添加剂,在空心微球/网络复合型碳泡沫的基础上,采用退火热处理工艺成功地制备出了AlN/C复合泡沫材料.通过扫描电镜、透射电镜对样品进行表征,测试结果表明无定形AlN在碳微球的表面重结晶为AlN晶须,其直径大约为50nm左右,长度10μm以上,具有较大的长径比.X-射线衍射峰证明样品石墨化程度高,且AlN晶须为六方结构.X-射线光电子能谱测试发现在287.5eV处有较明显的C-N峰出现,这表明AlN和碳泡沫在界面处通过C-N键结合.同时,对其力学性能进行测试,通过分析应力-应变测试结果,AlN/C复合泡沫材料的压缩强度为40.27MPa,相对碳泡沫材料而言提高了近一个数量级.测试结果表明,AlN晶须显著增强了碳泡沫的压缩强度,这种新型复合泡沫材料有望应用于各种抗压减震航空材料.     

C/C复合材料的光谱发射率研究

采用模压成型法制备了不同类型的C/C复合材料,测试了其法向光谱发射率的变化.结果表明,短切碳纤维增强的C/C复合材料,其法向光谱发射率在整个2 500～13 000 nm的测试波段内普遍要高于碳布增强复合材料样品.短切碳纤维结构的相对松散,单位体积内物质的粒子数相对较少,这增加了电磁波的穿透深度,从而使得样品的法向光谱发射率较高,热辐射特性较好.纤维预制体和C/C复合材料样品的法向光谱发射率测试对比可知,两种不同碳材料的微结构差异使得树脂碳的法向光谱发射率优于纤维碳.利用Raman光谱对不同碳物质进行物相分析表明,树脂碳以sp3和sp2杂化态碳原子的混合结构使其内部产生的局域振动模式较多,这也是样品法向光谱发射率较高,热辐射特性较好的原因.     

Novel conducting lithium ferrite/chitosan nanocomposite: Synthesis,characterization, magnetic and dielectric properties

A study on Lithium ferrite/chitosan nanocomposite (LFCN), easily moldable into arbitrary shapes, as the conducting polymer and ferromagnetic characteristics is presented. The composite material is produced in the presence of Li_0.5Cr_0.1Fe_2.4O₄ and Li_0.5Co_0.1Fe_2.4O₄ nanoparticle by ex-situ polymerizations process. Various characterizations techniques have been used to explore the characteristic of the synthesized products. The frequency dependent dielectric properties and electrical conductivity of all the samples have been measured through complex impedance plot in the frequency range of 1 kHz–6 MHz at room temperature. It was observed that in case of (LFCN), fluctuation in value of (ε′) and (ε″) is ceased over the frequency range of 4 Mz which can be attributed to the steady storage and dissipation of energy in the nanocomposite system. Moreover, it is also observed that electrical conductivity of (LFCN) increases with frequency and its value was found to be (0.032–0.048) (ohm-cm)⁻¹ in frequency range of 1 kHz–6 MHz. Due to its low cost, a simple synthesis process and high flexibility, the proposed LFCN may find applications in various types of electronic components.     

Synthesis and characterization of hydroxyapatite/titania nanocomposites using in situ precipitation technique

Hydroxyapatite/titania nanocomposites were successfully synthesized by in situ precipitation of precursor matters from hydroxyapatite and titania at 70 °C with different hydroxyapatite/titania ratios. X-ray diffraction, Fourier transform infrared spectroscopy, Brunauer–Emmett–Teller surface, scanning and transmission electron microscopes were employed to characterize the prepared nanocomposite powders. X-ray diffraction results indicated that hydroxyapatite and anatase (TiO₂) were the major crystalline phases. By increasing the amount of titania nano-particles, Fourier transform infrared spectroscopy revealed that (PO₄)³⁻ bands at 567, 1033 cm⁻¹ decreased. Brunauer–Emmett–Teller surface results also showed a reduction in surface areas of nanocomposites. Transmission electron microscope observations revealed that the aspect ratio of hydroxyapatite/TiO₂ nanocrystals increased by increasing TiO₂ proportion in nanocomposites. The observed nanorod crystals tended to thin, elongated and plate-like in shape.