Microwave synthesis, characterization, and electrochemical properties of α-Fe2O3 nanoparticles

Ultrafine α-Fe₂O₃ nanoparticles with an extremely narrow distribution were synthesized by microwave heating. Transmission electron microscopy (TEM) images showed that most primary particles have ellipsoid shapes, and the average diameter of the primary particles was less than 10 nm. The electron diffraction pattern and fringes in some particles in TEM images showed that these nanoparticles were single crystals. The BET surface area of the freeze-dried product was 217 m²/g. The initial discharge capacity of the α-Fe₂O₃ nanoparticles exceeded 1007 mA/g (cut-off voltage: 0.5 V). This large capacity corresponds to that calculated by assuming the reduction of Fe³⁺ to Fe⁰. The α-Fe₂O₃ nanoparticles also work as a rechargeable electrode material. The charge-discharge test between 4 V and 1.5 V gave a good rechargeable capacity of about 150 mAh/g.     

Rheological properties of a γ-Fe2O3 paraffin-based ferrofluid

A stable γ-Fe₂O₃ paraffin-based ferrofluid was prepared via high energy milling. The magnetic particles were characterized using X-ray diffraction, dynamic light scattering and vibrating sample magnetometer techniques. The rheological properties of the ferrofluid were studied using a standard rotating rheometer. The magnetoviscous effect and thixotropy in the ferrofluid were studied. The formation and destruction of magnetically induced structures and the interactions of nanoparticles and aggregates are discussed.     

Adsorption of methyl orange on mesoporous γ-Fe2O3/SiO2 nanocomposites

Mesoporous γ-Fe₂O₃/SiO₂ nanocomposite containing 30 mol% of γ-Fe₂O₃ was prepared by a template-free sol-gel method, and its removal ability for methyl orange (MO) was investigated. The nanocomposite was characterized using X-ray powder diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscope (SEM), Fourier transform infrared (FTIR) absorption measurements, nitrogen adsorption-desorption measurements, and magnetic measurements. The synthesized γ-Fe₂O₃/SiO₂ nanocomposite has a mesoporous structure with an average pore size of 3.5 nm and a specific surface area of 245 m²/g, and it exhibits ferrimagnetic characteristics with the maximum saturation magnetization of 20.9 emu/g. The adsorption of MO on the nanocomposite reaches the maximum adsorbed percentage of ca. 80% within a few minutes, showing that most of MO can be removed in a short time. The MO adsorption data fit well with both Langmuir and Freundlich adsorption isotherms. The maximum adsorption capacity of MO is estimated to be 476 mg/g.     

Relaxation structure analysis of Li inserted γ-Fe2O3

γ-Fe₂O₃ has a spinel structure with cation vacancy and is expected to perform as a favorable electrode material for secondary lithium-ion battery. When lithium is inserted electrochemically into γ-Fe₂O₃, prolonged potential change is observed after the insertion. In this study, we inserted various amount of Li into γ-Fe₂O₃ (x = 0.66, 1.1, 1.5 in terms of Li_XFe₂O₃), then made the circuit open, measured X-ray diffraction (XRD) patterns at various elapsed time, and analyzed the crystal structure change of γ-Fe₂O₃ with time by the Rietveld method. The X-ray Rietveld analysis revealed that the iron occupancy of 8a site decreased and that of 16c site increased with lithium insertion process and after lithium insertion, the iron occupancy of 8a site increased and that of 16c site decreased gradually with relaxation time. It is indicated that lithium prefer 8a site to occupy kinetically, on the other hand, prefer 16c site thermodynamically.     

Magnetic and microwave absorbing properties of polyaniline/γ-Fe2O3 nanocomposite

The conducting protonated polyaniline (ES)/γ-Fe₂O₃ nanocomposite with the different γ-Fe₂O₃ content were synthesized by in-situ polymerization. Its morphology, microstructure, DC conductivity and magnetic properties of samples were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), four-wire-technique, and vibrating sample magnetometer (VSM), respectively. The microwave absorbing properties of the nanocomposite powders dispersing in wax coating with the coating thickness of 2 mm were investigated using a vector network analyzers in the frequency range of 7–18 GHz. The pure ES has shown the absorption band with a maximum absorption at approximately 16 GHz and a width (defined as frequency difference between points where the absorption is more than 8 dB) of 3.24 GHz, when 10% γ-Fe₂O₃ by weight is incorporated , the width is broadened to 4.13 GHz and some other absorption bands appear in the range of 7–13 GHz. The parameter dielectric loss tan δ_e (=ε″/ε′) in the 7–18 GHz is found to decrease with increasing γ-Fe₂O₃ contents with 10%, 20%, 30%, respectively, but magnetic loss tan δ_m (=μ″/μ′) increases with increasing γ-Fe₂O₃ contents. The results show that moderate content of γ-Fe₂O₃ nanoparticles embedded in protonated polyaniline matrix may create advanced microwave absorption properties due to simultaneous adjusting of dielectric loss and magnetic loss.     

Magnetically separable photocatalytic composite γ-Fe2O3@TiO2 synthesized by heterogeneous precipitation

Synthesis of magnetically separable photocatalytic active composite γ-Fe₂O₃@TiO₂ is the main objective of this work. In the first step, maghemite nanoparticles were prepared by a precipitation method and consequently covered by the citric acid in order to adjust the zeta-potential of the particle surface. The magnetic carrier was enfolded by TiO₂ via heterogeneous precipitation of TiOSO₄ using urea as a precipitation agent. The procedure was designed to minimize the production costs in order to be easily transferred into the industry scale conserving the high quality of the photoactive product. Nontoxic element oxides were used because of the ecological acceptance. Various methods were employed to characterize and study the intermediate (magnetic nanoparticles) and final materials (TiO₂-maghemite composite), respectively. Moreover, the influence of the subsequent annealing on the structure, phase composition and properties of the products is discussed.     

Synthesis and magnetic properties of platelet γ-Fe2O3 particles for medical applications using hysteresis-loss heating

Platelet γ-Fe₂O₃ particles of particle size less than 100 nm were prepared for medical applications that use the hysteresis-loss heating of ferromagnetic particles. The γ-Fe₂O₃ particles were obtained through the dehydration, reduction, and oxidation of platelet α-FeOOH particles, which were synthesized by the precipitation of ferric ions in an alkaline solution containing ethanolamine, and the crystals grown using a hydrothermal treatment. The γ-Fe₂O₃ particles contained dimples formed by the dehydration of α-FeOOH particles. The coercive force and the saturation magnetization of the γ-Fe₂O₃ particles were in the ranges 11.9 to 12.7 kA/m (150 to 160 Oe), and 70 to 72 Am²/kg (70 to 72 emu/g), respectively. The specific loss power of the γ-Fe₂O₃ particles, estimated from their temperature-raising property measured under a peak magnetic field of 50.9 kA/m (640 Oe) and at a frequency of 117 kHz, was 590 W/g. This value is higher than that of spherical cobalt-containing iron oxide particles having equivalent coercive force and saturation magnetization, reflecting the larger area of the minor hysteresis loop measured under a peak magnetic field of 50.9 kA/m (640 Oe).     

Fabrication, characterization, and measurement of viscosity of α-Fe2O3-glycerol nanofluids

Magnetic nanofluids, ferrofluids, are a special category of smart nanomaterials, consisting of stable dispersion of magnetic nanoparticles in different fluids. In this study, magnetic nanoparticles of hematite, α-Fe₂O₃, were prepared by solvothermal method using Fe(NO₃)₃ as a starting material. The nanoparticles were characterized by X-ray diffraction (XRD) and transmission electronic microscope (TEM).To the best of our knowledge, this is the first research on the rheological properties of nanofluids of α-Fe₂O₃ nanoparticles and glycerol. The experimental results showed that the viscosity of α-Fe₂O₃-glycerol nanofluids increases with increasing the particle volume fraction and decreases with increasing temperature. Our results clearly showed that the α-Fe₂O₃-glycerol nanofluids are non-Newtonian shear-thinning and their shear viscosity depends strongly on temperature. The experimental data were compared with some theoretical models. The measured values of the effective viscosity of nanofluids are underestimated by the theoretical models.     

Solvothermal synthesis and characterization of α-Fe2O3 nanodiscs and Mn3O4 nanoparticles with 1,10-phenanthroline

α-Fe₂O₃ nanodiscs and Mn₃O₄ nanoparticles have been prepared by the 1,10-phenanthroline as complexing agent in the presence of sodium hydroxide under hydrothermal conditions. The products were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier transform infrared (FT-IR) spectra. The average diameter of α-Fe₂O₃ nanodiscs is of 2 μm. In the case of Mn₃O₄ sample, the Mn₃O₄ crystallites are nanoparticles with an average size of 34 nm. A formation mechanism for the α-Fe₂O₃ and Mn₃O₄ nanomaterials was proposed.     

Electrical property of nanocrystalline γ-Fe2O3 under high pressure

Using a microcircuit fabricated on a diamond anvil cell, in situ conductivity measurements on nanophase (NP) γ-Fe₂O₃ are obtained under high pressure. For NP γ-Fe₂O₃, the abrupt increase in electrical conductivity occurs at a pressure of 21.3 GPa, corresponding to a transition from maghemite to hematite. Above 26.4 GPa, conductivity increases smoothly with increasing pressure. No distinct abnormal change is observed during decompression, indicating that transformation is irreversible. The temperature-dependence of the conductivity of NP γ-Fe₂O₃ was investigated at several pressures, indicating the electrical conductivity of the sample increases with increasing pressure and temperature, and that a remarkable phenomenon of discontinuity occurs at 400 K. The abnormal change is attributed to the electronic phase transitions of NP γ-Fe₂O₃ due to the variation of inherent cation vacancies. Besides, the temperature-dependence of the electrical conductivity displays semiconductor-like behavior before 33.0 GPa.     

Preparation and high-temperature properties of Au nano-particles doped α-Al2O3 composite coating on TiAl-based alloy

Au nano-particles doped α-Al₂O₃ composite coatings were successfully prepared on TiAl-based alloy by electrodeposition, using the Al₂O₃ sols with minor addition of HAuCl₄ solution. The even distribution of Au nano-particles (<2.0 wt.%) in the α-Al₂O₃ matrix has been observed. Isothermal oxidation tests of the samples coated with the as-prepared novel coatings at 900 °C in static air for 200 h shown that the oxygen inward diffusion can be effectively suppressed to a low level. The results of high-temperature cyclic oxidation test at 900 °C in air revealed that the oxidation and spallation resistance of TiAl-based alloy were improved significantly under thermal cycling. In the as-prepared coatings, cracks were shielded by means of crack bridging and the fracture resistance of the formed scales can be improved by toughening effects of the composite structure. Surface scratching tests after the cyclic oxidation exhibited that the adhesion of the formed composite scale on TiAl-based alloy was remarkably improved by the Au nano-particles doped α-Al₂O₃ composite coating.     

Preparation and photocatalytic property of α-Fe2O3 hollow core/shell hierarchical nanostructures

We report the preparation of a novel kind of α-Fe₂O₃ hollow core/shell hierarchical nanostructures self-assembled by nanosheets. A green precursor powder is first prepared using nontoxic and inexpensive FeCl₃ and urea in ethylene glycol by a surfactant-free solvothermal method at 160 °C for 15 h. The α-Fe₂O₃ hollow core/shell hierarchical nanostructures are obtained by the thermal treatment of the green precursor powder. The as-prepared α-Fe₂O₃ hollow core/shell hierarchical nanostructures are porous, and exhibit a good photocatalytic activity for the degradation of phenol. The samples are characterized by X-ray powder diffraction (XRD), scanning electron microscopy (SEM), and transmission electron microscopy (TEM).     

Magnetic properties of nanosized γ-Fe2O3 and α-(Fe2/3Cr1/3)2O3, prepared by thermal decomposition of heterometallic single-molecular precursor

Thermal decomposition of the trinuclear complex [Fe₂CrO(CH₃COO)₆(H₂O)₃]NO₃ at 300, 400 and 500 °C gave γ-Fe₂O₃ nanoparticles along with amorphous chromium oxide, while decomposition of the same starting compound at 600 and 700 °C led to the formation of α-(Fe_2/3Cr_1/3)₂O₃ nanoparticles. Size of γ-Fe₂O₃ nanoparticles, determined by X-ray diffraction, was in the range from 9 to 11 nm and increased with formation temperature growth. Average size of α-(Fe_2/3Cr_1/3)₂O₃ nanoparticles was about 40 nm and almost did not depend on the temperature of its formation. γ-Fe₂O₃ nanoparticles possessed superparamagnetic behavior with blocking temperature 180-250 K, saturation magnetization 29-35 emu/g at 5 K, 44-49 emu/g at 300 K and coercivity 400-600 Oe at 5 K. α-(Fe_2/3Cr_1/3)₂O₃ nanoparticles were characterized by low magnetization values (2.7 emu/g at 70 kOe). Such magnetic properties can be caused by non-compensated spins and defects present on the surface of these nanoparticles. The increase of α-(Fe_2/3Cr_1/3)₂O₃ formation temperature led to decrease of magnetization (being compared for the same fields), which may be caused by decrease of the quantity of defects or non-compensated spins (due to decrease of particles' surface).     

Structure change analysis in γ-Fe2O3/carbon composite in the process of electrochemical lithium insertion

It was previously shown that γ-Fe₂O₃/carbon composite synthesized by the aqueous solution method exhibit good high-speed charge/discharge and cycle characteristics as the cathode material in lithium-ion rechargeable batteries. We examined the crystal structure of γ-Fe₂O₃ in γ-Fe₂O₃/carbon composite by X-ray diffraction and the Rietveld analysis before and during electrochemical insertion of lithium ions. Before insertion, the sample has a spinel structure belonging to the Fd3¯m space group with the following iron occupancies: 8a site, 0.92, 16c site, 0 and 16d site, 0.87. During insertion, iron occupancy at 16d site remains virtually constant, at 8a site decreases from 0.92 to 0, and at 16c site increases from 0 to 0.53. These results suggest that, during insertion, iron migrates from 8a to 16c site. In the most highly lithiated sample, iron occupancy at 8a site decreases to 0 and occupancies at 16c and 16d sites were not equalized. Thus, the crystal structure for this sample belongs not to the Fm3¯m space group that represents the rock salt structure, but rather to the Fd3¯m space group.     

Assembly of γ-Fe2O3/polyaniline nanofilms with tuned dipolar interaction

The internal morphology and magnetic properties of layer-by-layer assembled nanofilms of polyaniline (PANI) and maghemite (γ-Fe₂O₃—7.5-nm diameter) were probed with cross-sectional transmission electron microscopy (TEM) and magnetization measurements (magnetic hysteresis loops, magnetization using zero-field cooled/field-cooled protocols, and ac magnetic susceptibility). Additionally, simulations of the as-produced samples were performed to assess both the nanofilm’s morphology and the corresponding magnetic signatures using the cell dynamic system (CDS) approach and Monte Carlo (MC) through the standard Metropolis algorithm, respectively. Fine control of the film thickness and average maghemite particle–particle within this magnetic structure was accomplished by varying the number of bilayers (PANI/γ-Fe₂O₃) deposited onto silicon substrates or through changing the concentration of the maghemite particles suspended within the colloidal dispersion sample used for film fabrication. PANI/γ-Fe₂O₃ nanofilms comprising 5, 10, 25 and 50 deposited bilayers displayed, respectively, blocking temperatures (T _B) of 30, 35, 39 and 40 K and effective energy barriers (ΔE/k _B) of 1.0 × 10³, 2.3 × 10³, 2.8 × 10³ and 2.9 × 10³ K. Simulation of magnetic nanofilms using the CDS model provided the internal morphology to carry on MC simulation of the magnetic properties of the system taking into account the particle–particle dipolar interaction. The simulated (using CDS) surface–surface particle distance of 0.5, 2.5 and 4.5 nm was obtained for nanofilms with thicknesses of 36.0, 33.9 and 27.1 nm, respectively. The simulated (using MC) T _B values were 33.0, 30.2 and 29.5 K for nanofilms with thicknesses of 36.0, 33.9 and 27.1 nm, respectively. We found the experimental (TEM and magnetic measurements) and the simulated data (CDS and MC) in very good agreement, falling within the same range and displaying the same systematic trend. Our findings open up new perspectives for fabrication of magnetic nanofilms with pre-established (simulated) morphology and magnetic properties.     

Synthesis and characterization of β-Ga2O3 nanorods

A novel method was applied to prepare β-Ga₂O₃ nanorods. In this method, β-Ga₂O₃ nanorods have been successfully synthesized on Si(1 1 1) substrates through annealing sputtered Ga₂O₃/Mo films under flowing ammonia at 950 °C in a quartz tube. The as-synthesized nanorods are characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM) and Fourier transform infrared spectroscopy (FTIR). The results show that the nanorod is single-crystalline Ga₂O₃ with monoclinic structure. The β-Ga₂O₃ nanorods are straight and smooth with diameters in the range of 200-300 nm and lengths typically up to several micrometers. The growth process of the β-Ga₂O₃ nanorods is probably dominated by conventional vapor-solid (VS) mechanism.     

Investigation of structural,physical and optical properties of CeO2–Bi2O3–B2O3 glasses

xCeO₂–30Bi₂O₃–(70−x) B₂O₃ glasses are synthesized by using the melt quench technique. A number of studies such as XRD, density, molar volume, optical band gap, refractive index and FTIR spectroscopy are employed to characterize the glasses. The band gap decreases from 2.15 to 1.61 eV, refractive index increases from 2.67 to 2.93 and density increases from 4.151 to 4.633 g/cm³. The decrease in band gap with CeO₂ doping approaches the semiconductor behavior. FTIR spectroscopy reveals that incorporation of CeO₂ into glass network helps to convert the structural units of [BO₃] into [BO₄] and results in Bi–O bond vibration of [BiO₆].     

Piezoresponse force microscopy and magnetic force microscopy characterization of γ-Fe2O3-BiFeO3 nanocomposite/Bi3.25La0.75Ti3O12 multiferroic bilayers

The multiferroic behavior of epitaxial γ-Fe₂O₃-BiFeO₃ (composite)/Bi_3.25La_0.75Ti₃O₁₂ bi-layered heterostructures grown on SrRuO₃/SrTiO₃ (1 1 1) substrates has been studied using piezoresponse force microscopy, magnetic force microscopy and magnetometry. The ferroelectric domain structure is ascribed to the BiFeO₃ phase while the magnetism originates in the γ-Fe₂O₃ phase of the composite layer. Our studies demonstrate the presence and switching of magnetic and ferroelectric domains within the same area of the sample. This confirms the presence of multiferroic behavior at the nanoscale in our γ-Fe₂O₃-BiFeO₃ nanocomposite thin films.     

Influence of hydrothermally modified γ-Al2O3 on the properties of NiMo/γ-Al2O3 catalyst

The influence of hydrothermal modification of γ-Al₂O₃ on the properties of NiMo/γ-Al₂O₃ catalyst was investigated in this paper. The experimental results showed that the use of the modified γ-Al₂O₃ in the preparation of the NiMo/γ-Al₂O₃ catalyst led to the increase of the dispersion of the surface Mo and Ni oxides, favored the formation of the poly-molybdates and promoted the reduction of the active Mo oxides owing to the increase of the surface acidity of the modified γ-Al₂O₃. Therefore, the NiMo/γ-Al₂O₃ catalyst supported on the modified γ-Al₂O₃ exhibited a higher hydrodenitrogenation (HDN) activity than that supported on the untreated γ-Al₂O₃ in the temperature range of 300-340 °C.     

Preparation and characteristics of?a?BaO–Al2O3–B2O3–SiO2–La2O3 glass ceramic via spray pyrolysis

The characteristics of a BaO–Al₂O₃–B₂O₃–SiO₂–La₂O₃ glass ceramic prepared by spray pyrolysis were studied. Glass powders with spherical shape and amorphous phase were prepared by complete melting at a preparation temperature of 1 500°C. The mean size and geometric standard deviation of the powders prepared at the temperature of 1 500°C were 0.6 μm and 1.3. The glass powders had similar composition to that of the spray solution. The glass transition temperature (T _g) of the glass powders was 600.3°C. Two crystallization exothermic peaks were observed at 769.3 and 837.8°C. Densification of the specimen started at a sintering temperature of 600°C, in which Ba₄La₆O(SiO₄)₆ as main crystal structure was observed. Complete densification of the specimen occurred at a sintering temperature of 800°C. The specimens sintered at temperatures above 800°C had main crystal structure of BaAl₂Si₂O₈.