Controlling magnetic properties of iron oxide nanoparticles using post-synthesis thermal treatment

Changes in morphological and magnetic properties of Fe₃O₄ nanoparticles before and after annealing are investigated in the present work. The nanoparticles are synthesized in a standard capacitively coupled plasma enhanced chemical vapour deposition system with two electrodes using ferrocene as the source compound. Post annealing, due to the sintering process, the particles fuse along with recrystallization. This results in increased size of the nanoparticles and the interparticle interaction, which play a major role in deciding the magnetic properties. X-ray diffraction patterns of the samples before and after annealing indicate a phase change from Fe₃O₄ to Fe₂O₃. Annealing at 200 ^°C causes the apparent saturation magnetization to increase from 6 emu?g^?1 to 15 emu?g^?1. When annealed at 500 ^°C, the magnetic properties of the nanoparticles resemble those of the bulk material. The evidence for the transition from a superparamagnetic state to a collective state is also observed when annealed at 500 ^°C. Variation of the magnetic relaxation data with annealing also reflects the change in the magnetic state brought about by the annealing. The correlation between annealing temperature and the magnetic properties can be used to obtain nanocrystallites of iron oxide with different sizes and magnetic properties.     

Single step thermal decomposition approach to prepare supported γ-Fe2O3 nanoparticles

γ-Fe₂O₃ nanoparticles supported on MgO (macro-crystalline and nanocrystalline) were prepared by an easy single step thermal decomposition method. Thermal decomposition of iron acetylacetonate in diphenyl ether, in the presence of the supports followed by calcination, leads to iron oxide nanoparticles supported on MgO. The X-ray diffraction results indicate the stability of γ-Fe₂O₃ phase on MgO (macro-crystalline and nanocrystalline) up to 1150 °C. The scanning electron microscopy images show that the supported iron oxide nanoparticles are agglomerated while the energy dispersive X-ray analysis indicates the presence of iron, magnesium and oxygen in the samples. Transmission electron microscopy images indicate the presence of smaller γ-Fe₂O₃ nanoparticles on nanocrystalline MgO. The magnetic properties of the supported magnetic nanoparticles at various calcination temperatures (350-1150 °C) were studied using a superconducting quantum interference device which indicates superparamagnetic behavior.     

Synthesis and characterization of superparamagnetic iron oxide nanoparticles for biomedical applications

Monodisperse iron oxide nanoparticles (NPs) of 4 nm were obtained through high-temperature solution phase reaction of iron (III) acetylacetonate with 1, 2-hexadecanediol in the presence of oleic acid and oleylamine. The as-synthesized iron oxide nanoparticles have been characterized by X-ray diffraction, transmission electron microscopy, Mössbauer spectroscopy and magnetic measurements. The species obtained were Fe₃O₄ and/or $\upgamma$ -Fe₂O₃. These NPs are superparamagnetic at room temperature and even though the reduced particle size they show a high saturation magnetization (MS ≈ 90 emu/g).     

Superparamagnetism of magnetite particles in C<Subscript>60</Subscript> fullerite powder

A new magnetic material, C₆₀ fullerite powder doped by magnetite (Fe₃O₄) nanoparticles, is obtained by heating a mixture of fullerite and iron(III) acetylacetonate. It is shown that the material offers superparamagnetic properties. Surface bonding between the nanoparticles and the fullerite is established.     

Synthesis,characterization, and cytotoxicity of glutathione-PEG-iron oxide magnetic nanoparticles

Recently, increasing interest is spent on the synthesis of superparamagnetic iron oxide nanoparticles, followed by their characterization and evaluation of cytotoxicity towards tumorigenic cell lines. In this work, magnetite (Fe₃O₄) nanoparticles were synthesized by the polyol method and coated with polyethylene glycol (PEG) and glutathione (GSH), leading to the formation of PEG-Fe₃O₄ and GSH-PEG-Fe₃O₄ nanoparticles. The nanoparticles were characterized by state-of-the-art techniques: dynamic light scattering (DLS), atomic force microscopy (AFM), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and superconducting quantum interference device (SQUID) magnetic measurements. PEG-Fe₃O₄ and GSH-PEG-Fe₃O₄ nanoparticles have crystallite sizes of 10 and 5 nm, respectively, indicating compression in crystalline lattice upon addition of GSH on the nanoparticle surface. Both nanoparticles presented superparamagnetic behavior at room temperature, and AFM images revealed the regular spherical shape of the nanomaterials and the absence of particle aggregation. The average hydrodynamic sizes of PEG-Fe₃O₄ and GSH-PEG-Fe₃O₄ nanoparticles were 69 ± 37 and 124 nm ± 75 nm, respectively. The cytotoxicity of both nanoparticles was screened towards human prostatic carcinoma cells (PC-3). The results demonstrated a decrease in PC-3 viability upon treatment with PEG-Fe₃O₄ or GSH-PEG-Fe₃O₄ nanoparticles in a concentration-dependent manner. However, the cytotoxicity was not time-dependent. Due to the superparamagnetic behavior of PEG-Fe₃O₄ or GSH-PEG-Fe₃O₄ nanoparticles, upon the application of an external magnetic field, those nanoparticles can be guided to the target site yielding local toxic effects to tumor cells with minimal side effects to normal tissues, highlighting the promising uses of iron oxide nanoparticles in biomedical applications.     

Uptake of magnetic nanoparticles into cells for cell tracking

A challenge for future applications in nanotechnology is the functional integration of nano-sized materials into cellular structures. Here we investigated superparamagnetic Fe₃O₄ iron oxide nanoparticles coated with a lipid bilayer for uptake into cells and for targeting subcellular compartments. It was found that magnetic nanoparticles (MNPs) are effectively taken up into cells and make cells acquire magnetic activity. Biotin-conjugated MNPs were further functionalized by binding of the fluorescent tag streptavidin–fluorescein isothiocyanate (FITC) and, following uptake into cells, shown to confer magnetic activity and fluorescence labeling. Such FITC-MNPs were localized in the lysosomal compartment of cells which suggests a receptor-mediated uptake mechanism.     

Controlled flame synthesis of αFe<Subscript>2</Subscript>O<Subscript>3</Subscript> and Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles: effect of flame configuration,flame temperature,and additive loading

Superparamagnetic iron oxide nanoparticles are used in diverse applications, including optical magnetic recording, catalysts, gas sensors, targeted drug delivery, magnetic resonance imaging, and hyperthermic malignant cell therapy. Combustion synthesis of nanoparticles has significant advantages, including improved nanoparticle property control and commercial production rate capability with minimal post-processing. In the current study, superparamagnetic iron oxide nanoparticles were produced by flame synthesis using a coflow flame. The effect of flame configuration (diffusion and inverse diffusion), flame temperature, and additive loading on the final iron oxide nanoparticle morphology, elemental composition, and particle size were analyzed by transmission electron microscopy (TEM), high-resolution TEM (HR-TEM), energy dispersive spectroscopy (EDS), and Raman spectroscopy. The synthesized nanoparticles were primarily composed of two well known forms of iron oxide, namely hematite αFe₂O₃ and magnetite Fe₃O₄. We found that the synthesized nanoparticles were smaller (6–12 nm) for an inverse diffusion flame as compared to a diffusion flame configuration (50–60 nm) when CH₄, O₂, Ar, and N₂ gas flow rates were kept constant. In order to investigate the effect of flame temperature, CH₄, O₂, Ar gas flow rates were kept constant, and N₂ gas was added as a coolant to the system. TEM analysis of iron oxide nanoparticles synthesized using an inverse diffusion flame configuration with N₂ cooling demonstrated that particles no larger than 50–60 nm in diameter can be grown, indicating that nanoparticles did not coalesce in the cooler flame. Raman spectroscopy showed that these nanoparticles were primarily magnetite, as opposed to the primarily hematite nanoparticles produced in the hot flame configuration. In order to understand the effect of additive loading on iron oxide nanoparticle morphology, an Ar stream carrying titanium-tetra-isopropoxide (TTIP) was flowed through the outer annulus along with the CH₄ in the inverse diffusion flame configuration. When particles were synthesized in the presence of the TTIP additive, larger monodispersed individual particles (50–90 nm) were synthesized as observed by TEM. In this article, we show that iron oxide nanoparticles of varied morphology, composition, and size can be synthesized and controlled by varying flame configuration, flame temperature, and additive loading.     

Mössbauer study of a Fe3O4/PMMA nanocomposite synthesized by sonochemistry

Magnetite nanoparticles of 10 nm average size were synthesized by ultrasonic waves from the chemical reaction and precipitation of ferrous and ferric iron chloride (FeCl₃ · 6H₂O y FeCl₂ · 4H₂O) in a basic medium. The formation and the incorporation of the magnetite in PMMA were followed by XRD and Mössbauer Spectroscopy. These magnetite nanoparticles were subsequently incorporated into the polymer by ultrasonic waves in order to obtain the final sample of 5 % weight Fe₃O₄ into the polymethylmethacrylate (PMMA). Both samples Fe₃O₄ nanoparticles and 5 % Fe₃O₄/PMMA nanocomposite, were studied by Mössbauer spectroscopy in the temperature range of 300 K–77 K. In the case of room temperature, the Mössbauer spectrum of the Fe₃O₄ nanoparticles sample was fitted with two magnetic histograms, one corresponding to the tetrahedral sites (Fe^3?+?) and the other to the octahedral sites (Fe^3?+? and Fe^2?+?), while the 5 % Fe₃O₄/PMMA sample was fitted with two histograms as before and a singlet subspectrum related to a superparamagnetic behavior, caused by the dispersion of the nanoparticles into the polymer. The 77 K Mössabuer spectra for both samples were fitted with five magnetic subspectra similar to the bulk magnetite and for the 5 % Fe₃O₄/PMMA sample it was needed to add also a superparamagnetic singlet. Additionally, a study of the Verwey transition has been done and it was observed a different behavior compared with that of bulk magnetite.     

Role of ligands in the formation, phase stabilization, structural and magnetic properties of α-Fe2O3 nanoparticles

The electrochemical synthesis of alpha Fe₂O₃ nanoparticles was performed using quaternary ammonium salts viz. TPAB, TBAB and TOAB in an organic medium by optimizing current density and molar concentration of the ligand. The role of ligands in the formation of α phase, structure and magnetic properties was investigated in details. The effect of increasing chain length on the particle size confirmed that as the chain length increases from propyl to octyl, the particle size decreases. X-ray diffraction spectra of as prepared samples and TEM analysis confirmed the amorphous nature of iron oxide. TEM showed beads of iron oxide joined together with a size distribution in the range of 6–30 nm. The Mossbauer studies also support this observation that for the lowest particle size, the line width is broader which successively reduces with increase in particle size. Iron oxide capped with TOAB indicated superparamagnetic nature at room temperature. The resultant internal magnetic field of 506 mm/s due to hyperfine splitting clearly established the formation of α-Fe₂O₃ The infrared spectroscopy and pH measurements revealed the binding of tetra alkyl ligand with iron oxide. The IR spectra and the increase in basicity of as prepared samples confirmed the formation of hydrated iron oxide. Above 800°C the spectra indicated only iron oxide. Surface area obtained by BET method was 205 m²/g.     

Implications of nanoparticle concentration and size distribution in the superparamagnetic behaviour of aging-improved maghemite xerogels

Evolution of static magnetic properties of a set of enhanced γ-Fe₂O₃/SiO₂ nanocomposites with different iron concentration has been studied on the basis of their corresponding hysteresis loops, zero-field/field-cooled (ZFC/FC) magnetization curves and transmission electron microscopy images. The lack of coercivity in all compositions, as well as the fulfillment of the H/T scaling law by the magnetization above the blocking temperature of each system under study, evidence a superparamagnetic behaviour in the iron oxide nanoparticles. In order to study the influence of iron content in the unblocking processes of nanoparticles, ZFC curves under different applied magnetic fields have been fitted to a model considering the systems under study as a distribution of energy barriers. Depart from the superparamagnetic model is discussed considering interparticle interactions.     

Mössbauer studies of stoichiometry of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>: characterization of nanoparticles for biomedical applications

The iron oxide Fe₃O₄, the mineral magnetite sometimes called ferrosoferric oxide, is notoriousy non-stoichiometric even in bulk form so its formula may be written Fe_3?δO₄. In nanoparticle form, where it has applications in medicine and information technology, it is even more susceptible to oxidation. In this paper we report synthesis and studies of superparamagnetic Fe₃O₄ nanoparticles with controlled diameters of 5.3, 10.6 and 11.9 nm. In room temperature spectra, departures from stoichiometry δ of up to 0.02 were estimated from the relative amounts of Fe ³⁺/ Fe ²⁺ and from their isomer shifts. This cannot be used for very small particles of diameter 10.6 nm and less as they are superparamagnetic at room temperature and do not show hyperfine splitting owing to fast relaxation. Such particles have promise for use in enhancing MRI signals. The magnetic spectrum is restored by the application of a relatively small magnetic field (10 kG). As the temperature is lowered the relaxation slows down and 6-line magnetic hyperfine patterns appear below a blocking temperature T_B. The values of T_B obtained are lower than those of many other researchers reported in the literature, suggesting that our particles are less affected by magnetic interactions between them. At low temperatures all the spectra are similar and closely resemble that of bulk Fe₃O₄ confirming that departures from stoichiometry are small.     

Size-controlled synthesis of superparamagnetic iron oxide nanoparticles and their surface coating by gold for biomedical applications

The size mono-dispersity, saturation magnetization, and surface chemistry of magnetic nanoparticles (NPs) are recognized as critical factors for efficient biomedical applications. Here, we performed modified water-in-oil inverse nano-emulsion procedure for preparation of stable colloidal superparamagnetic iron oxide NPs (SPIONs) with high saturation magnetization. To achieve mono-dispersed SPIONs, optimization process was probed on several important factors including molar ratio of iron salts [Fe³⁺ and Fe²⁺], the concentration of ammonium hydroxide as reducing agent, and molar ratio of water to surfactant. The biocompatibility of the obtained NPs, at various concentrations, was evaluated via MTT (3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide) assay and the results showed that the NPs were non-toxic at concentrations <0.1 mg/mL. Surface functionalization was performed by conformal coating of the NPs with a thin shell of gold (∼4 nm) through chemical reduction of attached gold salts at the surface of the SPIONs. The Fe₃O₄ core/Au shell particles demonstrate strong plasmon resonance absorption and can be separated from solution using an external magnetic field. Experimental data from both physical and chemical determinations of the changes in particle size, surface plasmon resonance optical band, phase components, core–shell surface composition, and magnetic properties have confirmed the formation of the mono-dispersed core–shell nanostructure.     

Reversible Modification of Magnetic Properties of Fe3C Nanoparticles by Chemisorption of CO

The paper is devoted to the electron spin resonance and magnetic measurements of Fe₃C nanoparticles covered by a carbon structure. There is a reversible modification of the magnetic properties by the chemisorption of CO and O₂. The CO chemisorption results in the transition of the majority of the Fe₃C nanoparticles from the ferromagnetic to the superparamagnetic state. The O₂ chemisorption results in the backward transition. Authors' address: Petr A. Purtov, Institute of Chemical Kinetics and Combustion, Institutskaya ulitsa 3, Novosibirsk 630090, Russia     

Structural,magnetic and dielectric study of Fe2O3 nanoparticles obtained through exploding wire technique

We propose an exploding wire technique based facile approach to prepare Fe₂O₃ nanoparticles in ambient conditions. TG-DSC analysis of the prepared precursor (Fe(OH)₃) nanoparticles were done. The phase, lattice parameter and the average crystallite size were evaluated through X-ray diffraction analysis. The morphology of prepared nanoparticles was studied by scanning electron microscopy and Transmission electron microscope. The functional group formation of Fe₂O₃ nanoparticles and intrinsic stretching vibration bands of Fe–O were estimated through FTIR analysis. The direct band gap of Fe₂O₃ nanoparticles occurring in conjunction with indirect band gaps was established via Tauc plot. The magnetic parameters were studied through Mössbauer spectroscopy, ESR, M-H and M-T plot analysis. The attributes of dielectric behaviour like dielectric constant (ε′), loss tangent (tan δ), dielectric loss (ε″) and alternating current (AC) conductivity (σ_AC) were measured at various temperatures in the frequency range of 10 Hz-10⁶ KHz.     

EPR spectroscopy and imaging of TEMPO-labeled magnetite nanoparticles

The article presents results of a study of TEMPO-labeled polymer coated superparamagnetic iron(II,III) oxide nanoparticles using both Electron Paramagnetic Resonance (EPR) spectroscopy and Electron Paramagnetic Resonance imaging technique (EPRI). The X-band (9.4 GHz) EPR spectroscopy was used to investigate the behavior of TEMPO-labeled polymer coated magnetite nanoparticles in different conditions (temperature and orientation in magnetic field). The broad line, which comes from the core of Fe₃O₄ nanoparticles, shows anisotropy. This signal broadens with decreasing temperature, its intensity increases with increasing temperature and the g factor decreases with increasing temperature. The shape of the signal from nitroxide radical strongly depends on temperature. When temperature is higher than 200 K, a narrow triplet appears, but when it is lower than 200 K the signal consists of broad asymmetric lines. Analysis of the signal allowed characterization of the motion of the spin label attached to nanoparticles. Values of anisotropy parameter ɛ and rotational correlation time τ_c were calculated for TEMPO in the fast rotation regime.The ability of TEMPO-labeled PEG coated magnetite nanoparticles to diffuse within the hydrogel medium was also investigated. The EPR imaging of nanoparticles diffusion in hydrogel was made at room temperature using an EPR L-band (1 GHz) spectrometer. EPRI has been proved effective for evaluation of changes in the spatial distribution of nanoparticles in the sample.     

Mössbauer investigations of Fe and Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> magnetic nanoparticles for hyperthermia applications

Magnetic nanoparticles of magnetite Fe₃O₄ and Fe synthesized by physical vapor deposition with a fast highly effective method using a solar energy have been studied. Targets have been prepared from tablets pressed from Fe₃O₄ or Fe powders. Relationships between the structure of nanoparticles and their magnetic properties have been investigated in order to understand principles of the control of the parameters of magnetic nanoparticles. Mössbauer investigations have revealed that the nanoparticles synthesized from tablets of both pure iron and Fe₃O₄ consist of two phases: pure iron and iron oxides (γ-Fe₂O₃ and Fe₃O₄). The high iron oxidability suggests that the synthesized nanoparticles have a core/shell structure, where the core is pure iron and the shell is an oxidized iron layer. Magnetite nanoparticles synthesized at a pressure of 80 Torr have the best parameters for hyperthermia due to their core/shell structure and core-to-shell volume ratio.     

An easy and novel approach for the decoration of graphene oxide by Fe3O4 nanoparticles

A new and relatively general route was developed to fabricate graphene oxide (GO)-Fe₃O₄ hybrid. X-ray diffraction, transmission electron morphology, X-ray photoelectron spectroscopy (XPS) and energy-dispersive spectrum were used to demonstrate the successful attachment of iron oxide nanoparticles to GO sheets. Transmission electron microscopy observation indicates that the size of the Fe₃O₄ nanoparticles was about 2.7 nm with narrow size distribution. Moreover, this hybrid shows superparamagnetic property and allows the rapid separation under an external-magnetic field. In addition, the method could be extended to further development of graphene-based nanoelectronics.     

Strongly interacting superspins in Fe3O4 nanoparticles

In this paper we report structural and magnetic properties of Fe₃O₄ nanoparticles synthesized by thermal decomposition of ball milled iron nitrate and citric acid in N₂ and air ambient. The XRD pattern of samples which are prepared in air shows some impurity phases, while the samples synthesized in the N₂ atmosphere are almost pure Fe₃O₄ phase. The result shows that by increasing the particle size, the magnetization of the samples increases. The increase of magnetization by increasing the particle size could be attributed to the lower surface spin canting and surface spin disorder of the larger magnetic nanoparticles. The results of ac magnetic susceptibility measurements show that the susceptibility data are not in accordance with the Néel -Brown model for superparamagnetic relaxation, but fit well with conventional critical slowing down model which indicates that the dipole-dipole interactions are strong enough to cause superspin-glass like phase in these samples.     

Synthesis and characterization of magnetite nanopowders

We have synthesized the iron oxide nanoparticles using the newly developed mechanical ultrasonication method with the FeSO₄ · 7H₂O. We have also investigated the crystallographic structural properties, morphology, and magnetic properties of the nanopowders. According to the high resolution X-ray diffraction result, the as-synthesized iron oxide nanoparticles were magnetite (Fe₃O₄). The particle size of the magnetite nanoparticles was about 6 nm confirmed by transmission electron microscopy image. The particle shape was almost a sphere confirmed by scanning electron microscopy image. The coercivity and saturation magnetization of the as-synthesized iron oxide nanopowders were 114 Oe, and 3.7 emu/g, respectively.     

Superparamagnetic silica nanoparticles with immobilized metal affinity ligands for protein adsorption

Superparamagnetic silica-coated magnetite (Fe₃O₄) nanoparticles with immobilized metal affinity ligands were prepared for protein adsorption. First, magnetite nanoparticles were synthesized by co-precipitating Fe²⁺ and Fe³⁺ in an ammonia solution. Then silica was coated on the Fe₃O₄ nanoparticles using a sol–gel method to obtain magnetic silica nanoparticles. The condensation product of 3-Glycidoxypropyltrimethoxysilane (GLYMO) and iminodiacetic acid (IDA) was immobilized on them and after charged with Cu²⁺, the magnetic silica nanoparticles with immobilized Cu²⁺ were applied for the adsorption of bovine serum albumin (BSA). Scanning electron micrograph showed that the magnetic silica nanoparticles with an average size of 190 nm were well dispersed without aggregation. X-ray diffraction showed the spinel structure for the magnetite particles coated with silica. Magnetic measurement revealed the magnetic silica nanoparticles were superparamagnetic and the saturation magnetization was about 15.0 emu/g. Protein adsorption results showed that the nanoparticles had high adsorption capacity for BSA (73 mg/g) and low nonspecific adsorption. The regeneration of these nanoparticles was also studied.