Polypropylene modified with 2-hydroxyethyl acrylate-g-2-methacryloyloxyethyl phosphorycholine and its hemocompatibility

Polypropylene (PP) was modified with 2-hydroxyethyl acrylate (HEA) by solution radical grafting to introduce active hydroxyl groups on polypropylene backbone (PP-g-HEA). Then the biomimic monomer, 2-methacryloyloxyethyl phosphorycholine (MPC), was grafted onto the surface of PP-g-HEA film (PP-g-HEA-g-MPC) by redox graft polymerizations with ceric(IV) ammonium nitrate as an initiator. Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) showed that the HEA and MPC were introduced onto PP molecular chains and the copolymer, PP-g-HEA-g-MPC were formed. The water contact angle measurements demonstrated that the final modified PP film exhibited a better hydrophilic surface compared to the neat PP film. The platelets adhesion on the neat PP, PP-g-HEA and PP-g-HEA-g-MPC film was examined by scanning electron microscopy (SEM). It was found that a large number of platelets were adhered and activated on the surface of neat PP and PP-g-HEA films, while the number of platelets on PP-g-HEA-g-MPC surface was decreased remarkably. The result revealed that the introduction of poly(MPC) onto the PP surface improved the hemocompatibility of PP substantially.     

Zwitterionic monomer graft copolymerization onto polyurethane surface through a PEG spacer

A new zwitterionic surface was obtained by a novel three-step grafting procedure. The zwitterionic monomer was introduced by cerium-induced graft copolymerization in the presence of N,N′-methylene bisacrylamide (MBAA) as cross-linking agent. Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS) analysis confirmed the MBAA could stimulate zwitterionic monomer grafting onto the membrane surface. Surface properties were also determined by atomic force microscope (AFM) and water contact angle. The hemocompatibility of the modified PU membranes was evaluated by the activated partial thromboplastin time (APTT), thrombin time (TT) and prothrombin time (PT). The TT and APTT of PU were significantly prolonged by the zwitterion of sulfobetaine monomer grafting copolymerization. The new polyurethane membrane could have a great potential in biomedical applications.     

Surface modification of poly(styrene-b-(ethylene-co-butylene)-b-styrene) elastomer via photo-initiated graft polymerization of poly(ethylene glycol)

Poly(styrene-b-(ethylene-co-butylene)-b-styrene) (SEBS) copolymer biomedical elastomer was covalently grafted with poly(ethylene glycol) methyl ether methacrylate (PEGMA) via a photo-initiated graft polymerization technique. The surface graft polymerization of SEBS with PEGMA was verified by ATR-FTIR and XPS. Effect of graft polymerization parameters, i.e., monomer concentration, UV irradiation time and initiator concentration on the grafting density was investigated. Comparing with the virgin SEBS film, the PEGMA-modified SEBS film presented an enhanced wettability and a larger surface energy. Besides, the surface grafting of PEGMA imparted excellent anti-platelet adhesion and anti-protein adsorption to the SEBS surface.     

Surface modification of hydroxyapatite with poly(methyl methacrylate) via surface-initiated ATRP

This article describes the fabrication of hydroxyapatite (HAP) nanocomposites grafted with poly(methyl methacrylate) (PMMA). Surface-initiated atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) was carried out from hydroxyapatite particles derivatized with ATRP initiators. The structure and properties of the nanocomposites were investigated by thermogravimetric analysis (TGA), transmission electron microscopy (TEM), differential scanning calorimeter (DSC) measurements, and contact angle analyses. TGA was used to estimate the grafting density of ATRP initiators (0.49 initiator/nm²) and the amount of grafted PMMA on the HAP surface. The contact angle analyses indicated that grafting PMMA onto the HAP surface dramatically increased the hydrophobicity of the surface. Moreover, the HAP nanocomposites showed excellent dispersibility in both aqueous solution and organic solvent.     

Studies on surface graft polymerization of acrylic acid onto PTFE film by remote argon plasma initiation

The graft polymerization of acrylic acid (AAc) was carried out onto poly(tetrafluoroethylene) (PTFE) films that had been pretreated with remote argon plasma and subsequently exposed to oxygen to create peroxides. Peroxides are known to be the species responsible for initiating the graft polymerization when PTFE reacts with AAc. We chose different parameters of remote plasma treatment to get the optimum condition for introducing maximum peroxides (2.87 × 10⁻¹¹ mol/cm²) on the surface. The influence of grafted reaction conditions on the grafting degree was investigated. The maximum grafting degree was 25.2 μg/cm². The surface microstructures and compositions of the AAc grafted PTFE film were characterized with the water contact angle meter, Fourier-transform infrared spectroscopy (ATR-FTIR) and X-ray photoelectron spectroscopy (XPS). Contact angle measurements revealed that the water contact angle decreased from 108° to 41° and the surface free energy increased from 22.1 × 10⁻⁵ to 62.1 × 10⁻⁵ N cm⁻¹ by the grafting of the AAc chains. The hydrophilicity of the PTFE film surface was greatly enhanced. The time-dependent activity of the grafted surface was better than that of the plasma treated film.     

Surface modification of PVDF membrane via AGET ATRP directly from the membrane surface

This contribution demonstrates a method for PVDF microporous membrane modification via surface-initiated activators generated by electron transfer atom transfer radical polymerization (AGET ATRP) directly from the membrane surface. Three hydrophilic polymers, poly(2-(N,N-dimethylamino) ethyl methacrylate) (PDMAEMA), poly(2-oligo (ethylene glycol) monomethyl ether methacrylate) (POEGMA), and poly(2-hydroxyethyl methacrylate) (PHEMA), were grafted from the PVDF membrane surface in aqueous solution at room temperature. Attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS) confirmed the successful covalent tethering of the polymer chains onto the PVDF membrane surface. The gravimetry results indicated an approximately linear increase of the graft yields, up to about 330 μg/cm² for DMAEMA and 470 μg/cm² for both HEMA and OEGMA, with the polymerization time. Block copolymer brushes were prepared by chain extension. Water contact angle decreased over 50% for high yields, indicating improved surface hydrophilicity. The effects of the graft polymerization on membrane surface morphology, pore structure and permeability were investigated. It was found that the surface roughness was decreased and the pore size distribution was narrowed. The membrane permeability increased at low graft yields due to the enhanced hydrophilicity and decreased at high graft yields due to the overall reduction of the pore diameters.     

Platelet adhesion on phosphorus-incorporated tetrahedral amorphous carbon films

The haemocompatibility of phosphorus-incorporated tetrahedral amorphous carbon (ta-C:P) films, synthesized by filtered cathodic vacuum arc technique with PH₃ as the dopant source, was assessed by in vitro platelet adhesion tests. Results based on scanning electron microscopy and contact angle measurements reveal that phosphorus incorporation improves the wettability and blood compatibility of ta-C film. Our studies may provide a novel approach for the design and synthesis of doped ta-C films to repel platelet adhesion and reduce thrombosis risk.     

Surface modification of polyethylene film by acrylamide graft and alcoholysis for improvement of antithrombogenicity

To improve antithrombogenicity of polyethylene (PE) films, the films pretreated by Ar plasma were radiated by ultraviolet light to initiate grafting polymerization with acrylamide (AAm) in absence of photo-initiator, then the AAm-grafted PE films (PE-g-AAm) were alcoholized with octadecyl alcohol. Effects of Ar plasma composite parameter (W/FM), pretreated time, AAm monomer concentration, and UV irradiation time on grafting rate were investigated systematically. AAm-grafted PE film and alcoholized PE film (PE-g-SAAm) were characterized by contact angle, X-ray photoelectron spectroscopy (XPS), attenuated total reflectance Fourier transfer infrared (ATR-FT-IR) spectroscopy and atomic force microscope (AFM), respectively. The results indicated that the moieties of AAm and stearyl were successively immobilized onto the PE surface. The platelet adhesion experiment showed that antithrombogenicity of the modified PE films was improved in comparison with PE films. The change in antithrombogenicity is attributed to the surface of the modified film in presence of tail-like structure which consists of polyacrylamide as spacer and stearyl as end groups.     

Anti-fouling poly(2-hydoxyethyl methacrylate) surface coatings with specific bacteria recognition capabilities

Poly(2-hydroxyethyl methacrylate), PHEMA, brushes were prepared by surface-initiated atom transfer radical polymerization (SI-ATRP) on silanized glass slides bearing grafted initiators. High resolution X-ray photoelectron spectroscopy (XPS) highlighted the surface chemical changes of the glass slides upon silanization and surface-confined ATRP of HEMA. Particularly, the initiator sites from the silane were detected by their bromine Br3d core electron peak whilst the O/C atomic ratios and the high resolution C1s region of the glass–PHEMA hybrids are comparable to those of pure PHEMA, thus confirming that the PHEMA chains have indeed attached to the surface. The glass–PHEMA hybrids were found to behave as anti-fouling ultrathin coatings as they resisted non-specific Salmonella typhimurium bacterial adhesion. This behaviour is driven by the hydrophilic properties of the glass–PHEMA hybrids which were assessed by contact angle measurements. In contrast, after activation of PHEMA brushes by S. typhimurium antibodies through the trichlorotriazine coupling procedure, the bacteria specifically and strongly attached to the PHEMA-coated glass slides as judged from optical microscope observation.     

Surface modification of magnesium aluminum hydroxide nanoparticles with poly(methyl methacrylate) via one-pot in situ polymerization

Hydrophobic magnesium aluminum hydroxide composite particles (PMMA-MAH) were obtained by means of grafting poly(methyl methacrylate) (PMMA) onto the surface of magnesium aluminum hydroxide(MAH) nanoparticles after a novel type of phosphate coupling agent (DN-27) modification. The introduction of functional double bonds was firstly conducted on the surface of nanoparticles by DN-27 modification, followed by one-pot in situ polymerization on the particles surface using methyl methacrylate (MMA) as monomer, azoisobutyronitrile (AIBN) as initiator and sodium dodecyl sulfate (SDS) as stabilizer to graft PMMA on the surface of DN-27-modified MAH particles. The obtained composite particles were characterized by field-emission scanning electron microscope (FESEM), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), X-ray powder diffraction (XRD). The results show that the organic macromolecule PMMA could be successfully grafted on the surface of DN-27-modified MAH nanoparticles and the thermal stability of the PMMA-MAH composite particles had been improved. Compared with unmodified blank MAH sample, the product obtained with this method possesses better hydrophobic properties such as a higher water contact angle of 108° and a well dispersion.     

Surface modification and characterization of magnesium hydroxide sulfate hydrate nanowhiskers

In order to enhance the compatibility with plastic polymers, magnesium hydroxide sulfate hydrate (MHSH) nanowhiskers were modified through grafting methyl methacrylate (MMA) on the surface of the nanowhiskers by emulsion polymerization. The influences of the reaction time, MMA monomer content, adding speed of monomer and the reaction temperature on the grafting ratio were investigated. Thermogravimetry (TG), Fourier transform infrared (FT-IR) spectroscopy, X-ray powder diffraction (XRD), scanning electron microscope (SEM), energy-dispersive X-ray (EDX) spectroscopy and surface contact angle measurement were used to characterize the effect of surface modification. The results showed that the MHSH nanowhiskers were uniformly coated by polymethyl methacrylate (PMMA), and a well-defined core-shell hybrid structure of MHSH/PMMA was obtained. The surface contact angle of the hybrid whiskers increased to 87.32° from 12.71° and the whiskers surface was changed from hydrophilic to lipophilic.     

Double-chain phospholipid end-capped polyurethanes: Synthesis, characterization and platelet adhesion study

A novel phospholipid containing double chains and phosphotidylcholine polar head groups, 2-(10-(2-aminoethylamino)-10-oxodecanamido)-3-(decyloxy)-3-oxopropyl phosphorylcholine (ADDPC), was synthesized and characterized. Two kinds of double-chain phospholipid end-capped polyurethanes with different soft segments were prepared. The structure of prepared polyurethanes was characterized by X-ray photoelectron spectroscopic (XPS), attenuated total reflection Fourier transform infrared (ATR-FTIR) spectrometry and atomic force microscope (AFM), which indicated that the double-chain phospholipids enriched onto the top surface of the prepared polyurethane films. The preliminary evaluation of blood compatibility showed that these novel phospholipid end-capped polyurethanes could suppress platelet adhesion and activation effectively. This property did not depend on the chemical structure of polyurethanes. In addition, according to tensile test results, the phospholipid polyurethanes kept good mechanical properties in comparison with original polyurethanes. It is suggested that double-chain phospholipid end-caption has good potential for achieving both hemocompatibility and good mechanical properties simultaneously for polyurethanes.     

Modification of Low Density Polyethylene with 2-Hydroxyethyl Acrylate by a Swollen-Phase Grafting Method

Low-density polyethylene (LDPE) was modified with 2-hydroxyethyl acrylate (HEA) by a swollen phase grafting method with azobisiso-butyronitrile (AIBN) as initiator and xylene as a swelling agent. Fourier transform infrared spectroscopy (FTIR) and ¹H-nuclear magnetic resonance (¹H-NMR) showed that the HEA was grafted onto the PE molecular chains and the copolymer (LDPE-g-PHEA) was formed. The rheological data illustrated that the content of long chain branches (LCB) in LDPE-g-PHEA was higher than in LDPE. Melt flow index (MFI) measurements indicated that the LDPE backbone was degraded slightly when the HEA content was small in the process of grafting. X-ray diffraction (XRD) and water contact angle measurements demo-nstrated that the grafting degree had an influence on the crystallinity and polarity of the graft polymer. A staining analysis indicated that the dyeing of the product was improved continuously with increasing of the grafting degree. Polyvinylpyrrolidone (PVP), NaCl, and ultrasound were shown to contribute to the staining, with ultrasound being the most productive. The probable grafting reaction mechanism is pro-posed. The results of the influence of monomer concentration on the grafting reaction revealed that the grafting ratio and gel content of the product increased with increasing of HEA amount.     

Preparation and characterization of modified nano-porous PVDF membrane with high antifouling property using UV photo-grafting

In this study, the poly(vinylidene fluoride) (PVDF) membrane was prepared via immersion precipitation technique and modified by UV photo-grafting of hydrophilic monomers on the top membrane surface. Acrylic acid (AA) and 2-hydroxyethylmethacrylate (HEMA) as acrylic monomers and 2,4-phenylenediamine (PDA) and ethylene diamine (EDA) as amino monomers were used at different concentrations to modify the membrane and improve the hydrophilicity with less fouling tendency. Moreover the presence of benzophenon as photo-initiator for grafting the hydrophilic monomers onto PVDF membrane surface was elucidated. The virgin and modified PVDF membranes were characterized by contact angle, ATR-FTIR, SEM and cross-flow filtration. The contact angle measurements demonstrated that the hydrophilicities of the membranes were significantly enhanced by UV photo-grafting of hydrophilic monomers onto the membrane surface. The ATR-FTIR confirmed the occurrence of modification on PVDF membrane by UV photo-grafting. The pure water flux of membranes was declined by UV photo-grafting but the milk water permeation and protein rejection were slightly improved. Moreover the antifouling properties and flux recovery of PVDF membrane were improved by UV photo-grafting of hydrophilic monomers.     

Surface modification of polyacrylonitrile film by anchoring conductive polyaniline and determination of uricase adsorption capacity and activity

Polyacrylonitrile (PAN) films were modified with chemical polymerization of conductive polyaniline (PANI) in the presence of potassium dichromate as an oxidizing agent. The effect of aniline concentration on the grafting efficiency and on the electrical surface resistance of PAN and (PAN/PANI)-1-3 composite film was investigated. The surface resistances of the conductive composite films were found to be between 6.32 and 0.97 kΩ/cm. As the amount of grafted PANI increased on the PAN films, the electrical resistance of composite film decreased. The PAN/PANI composite films were also characterized using SEM and FTIR. The changes in the surface properties of the films were characterized by contact angle measurements. As expected, the PAN, PAN/PANI and PAN/PANI-uricase immobilized films, exhibited different contact angle values and surface free energy due to different interactive functional groups of the films.The conductive films were well characterized and used for immobilization of uricase. The amount of adsorbed enzyme increases with the increase of surface concentration of grafted fibrous polyaniline polymer. The maximum amount of immobilized enzyme onto composite film containing 2.4% PANI was about 216 μg/cm² (i.e., PAN/PANI-3). The immobilized uricase was reused 24 times in batch wise assay in a day. Finally, the immobilized uricase enzyme system was successfully fabricated and applied to determine the uric acid level in human serum samples.     

Exploring the influence of a XeCl laser treatment on biocompatibility of polyethersulfone film

The effect of XeCl laser irradiation on biocompatibility of polyethersulfone (PES) film surface was investigated. For this purpose, the surface of PES film was irradiated with different number of pulses at different fluences. The treated surfaces were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), atomic force microscopy (AFM) and contact angle measurements. The platelet adhesion and cell culture measurements were done on the treated surface for investigation of the biocompatibility. It was shown that, irradiation of surface with 500 pulses at a fluence of 25 mJ/cm² is the most optimal condition for improving the platelet adhesion on the PES surface with a XeCl laser.     

Interfacial reaction of silver ultra-thin film deposited on interpenetrating polymer network substrate by liquor-phase reduction

The interfacial reaction, metal transformations, and nonmetal bond types of silver ultra-thin film deposited on polyurethane (PU) based interpenetrating polymer networks (IPN) substrate by the liquor-phase reduction at room temperatures were studied by atomic force microscope (AFM), X-ray photoelectron spectroscopy (XPS) and attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR). The IPN substrate was prepared by dip-pulling precursors onto a silicon wafer or a glass plate, followed by solidification at room temperature. The interpenetrate structures of IPN with two crosslinked networks restricted the aggregation of silver during the reduction and deposition. The devised -OH terminal group in PU simplified the determination of reactive site in IPN and reinforced the adhesion between IPN and silver through interfacial reaction. The XPS results, which matched well with the ATR-FTIR results, verified the chemical reactive site of PU in IPN with silver in the oxide state.     

Biomaterial immobilization on polyurethane films by XeCl excimer laser processing

The surface chemical modification of polyurethane (PU) films was performed by an UV laser-induced chemical reaction in a polysaccharide solution. This process may be applicable as hydrophilic packaging of implantable medical devices and in vivo sensors. When a PU film in contact with an aqueous alginic acid (AAC) solution was irradiated with a XeCl laser, the PU film turned hydrophilic. Contact angles of water on the film were reduced from 110° to 60°. Since light absorption of the AAC solution at 308 nm was negligibly small, reactive sites were generated solely on the PU surface. There, AAC could be immobilized by chemical bonds thus allowing for a nanometer-scaled grafting of this biomolecule. The mechanism was investigated by surface analyses with Fourier-transform infrared spectroscopy (FT-IR), dye staining, ultraviolet-visible (UV-VIS) spectroscopy, and scanning electron microscopy (SEM) techniques. A one-photon photochemical process could beidentified. Received: 30 June 2000 / Accepted: 4 July 2000 / Published online: 13 September 2000     

Surface grafting density analysis of high anti-clotting PU-Si-g-P(MPC) films

Well-defined zwitterionic polymer brushes with good blood compatibility were studied, grafted from polyurethane (PU) substrate (PU-Si-g-P(MPC)) by surface-initiated reverse atom transfer radical polymerization (SI-RATRP). We found that the structure of polymer brushes and hence their properties greatly depend on the grafting density. To solve the problems of the normal method for grafting density measurement, i.e., more requirements for qualified and proficient instrument operator, we established an effective and feasible way instead of the conventional method of spectroscopic ellipsometer combined with gel permeation chromatograph (ELM/GPC) to calculate the grafting density of PU-Si-g-P(MPC) films by using a software named ImageJ 1.44e in combination with scanning electronic microscope (SEM) or atomic microscope (AFM). X-ray photoelectron spectroscopy (XPS), SEM and AFM were employed to analyze the surface topography and changes of elements before and after graft modification of the synthetic PU-Si-g-P(MPC) biofilms.     

Radiation graft copolymerization of butyl methacrylate and acrylamide onto low density polyethylene and polypropylene films,and its application in wastewater treatment

Butyl methacrylate and acrylamide (BMA/AAm) comonomers were grafted onto low-density polyethylene (LDPE) and polypropylene (PP) films using the mutual gamma radiation grafting technique. The influences of grafting conditions such as solvent, monomer concentration, monomer composition, and irradiation dose on the grafting yield were determined. It was found that using dimethyl formamide as a solvent enhanced the copolymerization process. The grafting yield increases as the comonomer concentration increases up to 60%. Also it was found that the degree of grafting of BMA/AAm onto both LDPE and PP films increases as the AAm content increases till an optimum value at 50:50 wt%. The grafting yield of the comonomers was found to increase with increase in the radiation dose. It was observed that the degree of grafting of polyethylene films is higher than that of polypropylene (PP) films at the same conditions. Some selected properties of the graft copolymers, such as water uptake and thermal properties, were determined using thermogravimetric analysis. The morphology and structure of the grafted films were investigated using scanning electron microscopy, infra-red, and X-ray diffraction. Improvement in such properties of the prepared copolymers was observed which offers possible uses in some practical applications such as the removal of some heavy metals from wastewater. It was found that the maximum metal uptake by the copolymer followed the order Cu²⁺>Co²⁺>Ni²⁺ ions.