Evolution of surface morphology of NiO thin films under swift heavy ion irradiation

NiO nanoparticle thin films grown on Si substrates were irradiated by 107 MeV Ag⁸⁺ ions. The films were characterized by glancing angle X-ray diffraction and atomic force microscopy. Ag ion irradiation was found to influence the shape and size of the nanoparticles. The pristine NiO film consisted of uniform size (∼100 nm along major axis and ∼55 nm along minor axis) elliptical particles, which changed to also of uniform size (∼63 nm) circular shape particles on irradiation at a fluence of 3 × 10¹³ ions cm⁻². Comparison of XRD line width analysis and AFM data revealed that the particles in the pristine films are single crystalline, which turn to polycrystalline on irradiation with 107 MeV Ag ions.     

Effect of swift heavy ion irradiation on photoluminescence properties of ZnO/PMMA nanocomposite films

We report a study on the SHI induced modifications on structural and optical properties of ZnO/PMMA nanocomposite films. The ZnO nanoparticles were synthesized by the chemical route using 2-mercaptoethanol as a capping agent. The structure of ZnO nanoparticles was confirmed by XRD, SEM and TEM. These ZnO nanoparticles were dispersed in the PMMA matrix to form ZnO/PMMA nanocomposite films by the solution cast method. These ZnO/PMMA nanocomposite films were then irradiated by swift heavy ion irradiation (Ni⁸⁺ ion beam, 100 MeV) at a fluence of 1×10¹¹ ions/cm². The nanocomposite films were then characterized by XRD, UV-vis absorption spectroscopy and photoluminescence spectroscopy. As revealed from the absorption spectra, absorption edge is not changed by the irradiation but the optical absorption is increased. Enhanced green luminescence at about 527 nm and a less intense blue emission peak around 460 nm were observed after irradiation with respect to the pristine ZnO/PMMA nanocomposite film.     

Analyses of surface coloration on TiO2 film irradiated with excimer laser

TiO₂ film of around 850 nm in thickness was deposited on a soda-lime glass by PVD sputtering and irradiated using one pulse of krypton-fluorine (KrF) excimer laser (wavelength of 248 nm and pulse duration of 25 ns) with varying fluence. The color of the irradiated area became darker with increasing laser fluence. Irradiated surfaces were characterized using optical microscopy, scanning electron microscopy, Raman spectroscopy and atomic force microscopy. Surface undergoes thermal annealing at low laser fluence of 400 and 590 mJ/cm². Microcracks at medium laser fluence of 1000 mJ/cm² are attributed to surface melting and solidification. Hydrodynamic ablation is proposed to explain the formation of micropores and networks at higher laser fluence of 1100 and 1200 mJ/cm². The darkening effect is explained in terms of trapping of light in the surface defects formed rather than anatase to rutile phase transformation as reported by others. Controlled darkening of TiO₂ film might be used for adjustable filters.     

Effect of swift (∼100 MeV) heavy ion irradiation on surface morphology and electronic transport in Fe film on Si substrate

Fe film (∼50 nm) have been deposited on pSi substrate by electron beam evaporation technique. The bilayers have been irradiated by 100 MeV Fe⁷⁺ ions having fluences of 1 × 10¹³, 1 × 10¹⁴ and 5 × 10¹⁴ ions cm⁻². SEM study of the unirradiated devices show surface modifications having a annular structures. From XRD study of the bilayer, it is observed that grain size has reduced from 70 to 25 nm after the irradiation for a fluence of 1 × 10¹⁴ ions cm⁻². Moreover electronic transport data of the bilayer show practically no effect on the current flow for a fluence of 1 × 10¹³ ions cm⁻² irradiation whereas for 1 × 10¹⁴ ions cm⁻² fluence, there is very significant change in current flow (by two orders in magnitude) across the bilayer. However, for a higher fluence of irradiation 5 × 10¹⁴ ions cm⁻², the bilayer becomes highly resistive. It has been found from the above observations that the fluence of 1 × 10¹⁴ ions cm⁻² of swift heavy ion irradiation is a optimum fluence.     

Surface roughness and power spectral density study of SHI irradiated ultra-thin gold films

Quantitative roughness and microstructural analysis of as-deposited and swift heavy ion (SHI) (107 MeV Ag and 58 MeV Ni) irradiated 10 and 20 nm thick Au films were performed by atomic force microscopy (AFM). Power spectral density (PSD) analysis was done from the AFM images. The energies chosen for the two different ions eliminated the velocity effect of SHI in materials modification. The rms roughness estimated from the AFM data did not show either monotonic increase or decrease with ion fluences. Instead, it increased at low fluences and decreased at high fluences for 20 nm thick film. In 10 nm film, the roughness first increased with ion fluence, then decreased and again increased at higher fluences. Though the 10 and 20 nm films exhibited very different patterns of rms roughness variation with ion fluence, the pattern of variation in both cases was identical for Ni and Ag beams. The PSD analysis for both 10 and 20 nm films (pristine and irradiated) showed similar variation of low frequency roughness with ion fluence as that of the rms roughness. In the high frequency regime, PSD analysis suggests that surface morphology of the irradiated samples is governed by the combined effect of evaporation-recondensation and diffusion dominated processes.     

Influence of high-energy electron irradiation on field emission properties of multi-walled carbon nanotubes (MWCNTs) films

The effect of very high energy electron beam irradiation on the field emission characteristics of multi-walled carbon nanotubes (MWCNTs) has been investigated. The MWCNTs films deposited on silicon (Si) substrates were irradiated with 6 MeV electron beam at different fluence of 1×10¹⁵, 2×10¹⁵ and 3×10¹⁵ electrons/cm². The irradiated films were characterized using scanning electron microscope (SEM) and micro-Raman spectrometer. The SEM analysis clearly revealed a change in surface morphology of the films upon irradiation. The Raman spectra of the irradiated films show structural damage caused by the interaction of high-energy electrons. The field emission studies were carried out in a planar diode configuration at the base pressure of ∼1×10⁻⁸ mbar. The values of the threshold field, required to draw an emission current density of ∼1 μA/cm², are found to be ∼0.52, 1.9, 1.3 and 0.8 V/μm for untreated, irradiated with fluence of 1×10¹⁵, 2×10¹⁵ and 3×10¹⁵ electrons/cm². The irradiated films exhibit better emission current stability as compared to the untreated film. The improved field emission properties of the irradiated films have been attributed to the structural damage as revealed from the Raman studies.     

Ion irradiation induced Al-Ti interaction in nano-scaled Al/Ti multilayers

Interactions induced in Al/Ti multilayers by implantation of Ar ions at room temperature were investgated. Initial structures consisted of (Al/Ti) × 5 multilayers deposited by d.c. ion sputtering on Si(1 0 0) wafers, to a total thickness of ∼250 nm. They were irradiated with 200 keV Ar⁺ ions, to the fluences from 5 × 10¹⁵ to 4 × 10¹⁶ ions/cm². It was found that ion irradiation induced a progressed intermixing of the multilayer constituents and Al-Ti nanoalloying for the highest applied fluence. The resulting nanocrystalline structure had a graded composition with non-reacted or interdiffused Al and Ti, and γ-AlTi and AlTi₃ intermetallic phases. Most intense reactivity was observed around mid depth of the multilayers, where most energy was deposited by the impact ions. It is presumed that Al-Ti chemical reaction is triggered by thermal spikes and further enhanced by chemical driving forces. The applied processing can be interesting for fabrication of tightly bond multilayered structures with gradual changes of their composition and properties.     

Nanoporous structures of polyimide induced by Ar ion beam irradiation

The surface morphology evolution of polyimide (PI) that was treated with an Ar ion beam was explored using a hybrid ion beam system. A hole-like nanostructure formed on PI during the Ar ion beam treatment at a lower fluence, but PI formed 3D porous nanostructures with a mean diameter of ∼90 nm at a higher fluence. The chemical binding energy and the composition of the Ar ion irradiated PI were analyzed using FT-IR and XPS spectra, which revealed that the polymer chain scissioning increased with increasing Ar ion treatment duration, i.e., fluence. The surface hardness and the elastic modulus of PI increased from 1.17 to 1.62 GPa and 4.06 to 5.41 GPa, respectively, with respect to the Ar ion beam treatment duration.     

Room temperature magnetic properties of Fe and C implanted ZnO films

ZnO films prepared by radio frequency magnetron sputtering were singly or sequentially implanted with 120 keV Fe ions at a fluence of 5 × 10¹⁶ ions/cm² and 20 keV C ions at a fluence of 3 × 10¹⁵ ions/cm². Magnetic and optical properties as well as structures of the films have been investigated using various techniques. Magnetic measurements show that the as-deposited ZnO film presents room temperature ferromagnetism. Single Fe or C ion implantation has no contribution to enhancement in the film magnetism, while magnetic moment increases distinctly in the Fe and C ions sequentially implanted film. Results from structural measurements reveal that Fe nanoparticles are formed in the Fe singly implanted ZnO film. The post C implantation induces dissolution of Fe nanoparticles and promotes Fe atoms to substitute Zn atoms in the lattice. Based on the structural results, the effect of magnetic enhancement has been tentatively interpreted.     

125 MeV Si ion irradiation of calcium phosphate thin film coated by rf-magnetron sputtering technique

Titanium substrate was coated with hydroxyapatite by radiofrequency magnetron sputtering (rf-magnetron sputtering) technique and subjected to swift heavy ion (SHI) irradiation of 125 MeV with Si⁹⁺ at fluences of 1 × 10¹⁰, 1 × 10¹¹ and 1 × 10¹² ions/cm². The glancing incidence X-ray diffraction (GIXRD) analysis confirmed the HAp phase of the irradiated film. There was a considerable decrease in crystallinity and particle size after irradiation. In addition, DRS-UV reflectance spectra revealed a decrease in optical band gap (E_g) from 5.2 to 4.6 eV. Wettability of biocompatible materials plays an important role in biological cells proliferation for tissue engineering, drug delivery, gene transfer and bone growth. HAp thin films irradiated with 1 × 10¹¹ ions/cm² fluence showed significant increase in wettability. While the SHI irradiated samples exhibited enhanced bioactivity, there was no significant variation in cell viability. Surface roughness, pores and average particle size were analyzed by atomic force microscopy (AFM).     

Substrate effect on electronic sputtering yield in polycrystalline fluoride (LiF, CaF2 and BaF2) thin films

Influence of substrate on electronic sputtering of fluoride (LiF, CaF₂ and BaF₂) thin films, 10 and 100 nm thin, under dense electronic excitation of 120 MeV Ag²⁵⁺ ions irradiation is investigated. The sputtering yield of the films deposited on insulating (glass) and semiconducting (Si) substrates are determined by elastic recoil detection analysis technique. Results revealed that sputtering yield is higher, up to 7.4 × 10⁶ atoms/ion for LiF film on glass substrate, than that is reported for bulk materials/crystals (∼10⁴ atoms/ion), while a lower value of the yield (2.3 × 10⁶ atoms/ion) is observed for film deposited on Si substrate. The increase in the yield for thin films as compared to bulk material is a combined effect of the insulator substrate used for deposition and reduced film dimension. The results are explained in the framework of thermal spike model along with substrate and size effects in thin films. It is also observed that the material with higher band gap showed higher sputtering yield.     

Structural phase diagram for ZnS nanocrystalline thin films under swift heavy ion irradiation

The synthesis of nanocrystalline ZnS thin films by pulsed laser deposition and their modification by swift heavy ions are presented. The irradiations with 150 MeV Ni ions at fluences of 1×10¹¹, 1×10¹² and 1×10¹³ ions/cm² have been used for these studies. Irradiation results in structural phase transformation and bandgap modification of these films are investigated by using X-ray diffraction and UV-visible absorption measurements, respectively. Since stoichiometry changes induced by irradiation can contribute to the modification of these properties, elastic recoil detection analysis has been performed on pristine and 150 MeV Ni ions irradiated ZnS thin films using a 120 MeV Ag ion beam. The stoichiometry of the films has been found to be similar for pristine and ion irradiated samples. A structural phase diagram based on thermal and pressure spikes has been constructed to explain the structural phase transformation.     

Ultraviolet irradiation induced changes in the surface of phenolphthalein poly(ether sulfone) film

Changes in surface characteristics of phenolphthalein poly(ether sulfone) (PES-C) film induced by ultraviolet (UV) irradiation were investigated. The surface properties of the pristine and irradiated films were studied by attenuated total-reflection FTIR (FTIR-ATR), X-ray photoelectron spectroscopy (XPS), contact angle measurements and atomic force microscopy (AFM). It was found that photooxidation degradation took place on the sample surface after irradiation and the oxygen content in the surface increased as evidenced by FTIR-ATR and XPS results. The water contact angle of the irradiated films decreased with increasing irradiation time, which was ascribed to the increased polarity of the surface induced by photooxidation. The etching of ultraviolet irradiation induced the roughening of PES-C surface after irradiation with its root-mean-square roughness (RMS) determined by AFM increased from 2.097 nm before irradiation to 7.403 nm in the area of 25 μm × 25 μm.     

Effect of 160 MeV Ni ion irradiation on PbS quantum dots

PbS quantum dots of average size 10 nm are encapsulated in a matrix (polyvinyl alcohol (PVA)) following chemical route. They are irradiated with 160 MeV Ni¹²⁺ ion beam with fluences 10¹²-10¹³ ions/cm². Red shift in the absorption response in the optical absorption spectra reveal size enhancement of the quantum dots after irradiation and was confirmed by transmission electron microscopy (TEM). Photoluminescence (PL) study was carried out with excitation wavelength 325 nm on both unirradiated and irradiated samples at different fluences and fluence-dependent surface states and excitonic emission is observed in the PL study. The Huang-Rhys coupling constant decreases significantly after swift heavy ion (SHI) irradiation and shows a decreasing trend with increase in ion fluence.     

SHI induced silicide formation and surface morphology at Co/Si system

Ion beam mixing is a useful technique to produce modifications at the surface and interface of the solid material. In the present work, ion beam induced modifications at Co/Si interface using 120 MeV Au-ion irradiation has been studied at ion fluences in the range of 10¹² to 10¹⁴ ions/cm² by secondary ion mass spectroscopy (SIMS) technique and calculated mixing efficiency at the interface. Silicide formation has been discussed on the basis of swift heavy ion (SHI) irradiation induced effects. Surface morphology and roughness of irradiated system with fluence 5 × 10¹³ and 1 × 10¹⁴ ions/cm² is studied by scanning tunneling microscopy (STM). Roughness of the surface shows marks of melting process and confirms the appearance of some pinholes in the reacted Co/Si system. Comparative study was also undertaken on annealed sample at 300 °C and then irradiated at a dose 1 × 10¹⁴ ions/cm².     

Effect of swift heavy ion irradiation in Fe/W multilayer structures

Present study reports effect of swift heavy ion irradiation on structural and magnetic properties of sputtered Fe/W multilayer structures (MLS) having bilayer compositions of [Fe(20 Å)/W(10 Å)]_5BL and [Fe(20 Å)/W(30 Å)]_5BL. These MLS are irradiated by 120 MeV Au⁹⁺ ions up to fluence of 4 × 10¹³ ions/cm². X-ray reflectivity (XRR), wide-angle X-ray diffraction (WAXD), cross-sectional transmission electron microscopy (X-TEM) and magneto optical Kerr effect (MOKE) techniques are used for structural and magnetic characterization of pristine and irradiated MLS. Analysis of XRR data using Parratt's formalism shows a significant increase in W/Fe interface roughness. WAXD and X-TEM studies reveals that intra-layer microstructure of Fe-layers in MLS becomes nano-crystalline on irradiation. MOKE study shows increase in coercivity at higher fluence, which may be due to increase in surface and interface roughness after recrystallization of Fe-layers.     

Swift heavy ion induced modifications in cobalt doped ZnO thin films: Structural and optical studies

Modifications in the structural and optical properties of 100 MeV Ni⁷⁺ ions irradiated cobalt doped ZnO thin films (Zn_1−xCo_xO, x = 0.05) prepared by sol-gel route were studied. The films irradiated with a fluence of 1 × 10¹³ ions/cm² were single phase and show improved crystalline structure with preferred C-axis orientation as revealed from XRD analysis. Effects of irradiation on bond structure of thin films were studied by FTIR spectroscopy. The spectrum shows no change in bonding structure of Zn-O after irradiation. Improved quality of films is further supported by FTIR studies. Optical properties of the pristine and irradiated samples have been determined by using UV-vis spectroscopic technique. Optical absorption spectra show an appreciable red shift in the band gap of irradiated Zn_1−xCo_xO thin film due to sp-d interaction between Co²⁺ ions and ZnO band electrons. Transmission spectra show absorption band edges at 1.8 eV, 2.05 eV and 2.18 eV corresponding to d-d transition of Co²⁺ ions in tetrahedral field of ZnO. The AFM study shows a slight increase in grain size and surface roughness of the thin films after irradiation.     

Effects of swift heavy ion irradiation on the electrical characteristics of Au/n-GaAs Schottky diodes

Metal-semiconductor diode of Au/n-GaAs is studied under the irradiation of swift heavy ion (SHI) beam (80 MeV ¹⁶O⁶⁺), using in situ current-voltage characterization technique. The diode parameters like ideality factor, barrier height, and leakage current are observed to vary with irradiation fluence. Significantly, the diode performance improves at a high fluence of 2 × 10¹³ ions cm⁻² with a large decrease of reverse leakage current in comparison to the original as deposited sample. The Schottky barrier height (SBH) also increases with fluence. At a high irradiation fluence of 5 × 10¹³ ions cm⁻² the SBH (0.62 ± 0.01 eV) is much larger than that of the as deposited sample (0.55 ± 0.01 eV). The diode parameters remain stable over a large range of irradiation up to fluence of 8 × 10¹³ ions cm⁻². A prominent annealing effect of the swift ion beam owing to moderate electronic excitation and high ratio of electronic energy loss to the nuclear loss is found to be responsible for the improvement in diode characteristics.     

Synthesis of silicon carbide films by combined implantation with sputtering techniques

Silicon carbide (SiC) films were synthesized by combined metal vapor vacuum arc (MEVVA) ion implantation with ion beam assisted deposition (IBAD) techniques. Carbon ions with 40 keV energy were implanted into Si(1 0 0) substrates at ion fluence of 5 × 10¹⁶ ions/cm². Then silicon and carbon atoms were co-sputtered on the Si(1 0 0) substrate surface, at the same time the samples underwent assistant Ar-ion irradiation at 20 keV energy. A group of samples with substrate temperatures ranging from 400 to 600 °C were used to analyze the effect of temperature on formation of the SiC film. Influence of the assistant Ar-ion irradiation was also investigated. The structure, morphology and mechanical properties of the deposited films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and nanoindentation, respectively. The bond configurations were obtained from IR absorption and Raman spectroscopy. The experimental results indicate that microcrystalline SiC films were synthesized at 600 °C. The substrate temperature and assistant Ar-ion irradiation played a key role in the process. The assistant Ar-ion irradiation also helps increasing the nanohardness and bulk modulus of the SiC films. The best values of nanohardness and bulk modulus were 24.1 and 282.6 GPa, respectively.     

Magnetic study of nanostructured zinc ferrite irradiated with 100 MeV O-beam

Nanostructured zinc ferrite of particle size 10 nm was synthesized by using the nitrates of appropriate cations and citric acid. This system was irradiated by 100 MeV oxygen beam with the fluence of 5×10¹³ ions/cm². The particle size of the system remains almost same after the irradiation. We observe decrease in magnetization of the sample after irradiation at 300 and 10 K. The nature of the σ-H plot shows the presence of superparamgnetic domains at 300 K even after irradiation. The blocking temperature decreases from 276 to 63 K after irradiation. The Mössbauer spectroscopy supports the presence of superparamgnetic domains at 300 K in both the samples. The decrease in magnetization after irradiation is attributed to the decrease in cation inversion and increase in canting angle as observed from in-field Mössbauer spectroscopy.