Hydroxyapatite/titania composite bioactivity coating processed by sol-gel method

Hydroxyapatite/titania composite material was coated onto a titanium (pure Ti) substrate by sol-gel method. The hydroxyapatite (HA) and titania (TiO₂) sol were made from precursor and mixed together. The insertion of TiO₂ enhanced the chemical affinity and the physical consistency between HA and Ti substrate. The HA/TiO₂ composite coating adhered tightly to the Ti substrate. Owing to the insertion of TiO₂, the crystallinity of HA has been delayed. The specimens with HA/TiO₂ composite coatings were soaked into SBF, and displayed good bone-like apatite forming ability. The bioactivity of the composite HA coatings were tested in vitro by cell culture.     

Surface analysis of biocompatible coatings on titanium

The coatings of hydroxyapatite, which is widely used for orthopaedic and dental prothesis, were deposited by using the dip-coating method. The layers of hydroxyapatite were grown on commercial Ti substrates. In order to improve the adhesion of hydroxyapatite, the substrate was a priori covered with titania or calcium titanate by using the sol-gel technique. For comparison, commercial samples of hydroxyapatite coating (manufactured by means of plasma-spray apparatus) were analysed. The chemical composition and the structure of the coatings (TiO₂, CaTiO₃ and hydroxyapatite) were studied by using X-ray photoelectron spectroscopy (XPS), scanning Auger microscopy (SAM), X-ray diffraction (XRD) and secondary electron microscopy (SEM) techniques. The data of quantitative XPS analysis and the surface images (SAM and SEM) displayed the superior quality (cleanness, homogeneity, etc.) of hydroxyapatite deposited by sol-gel in comparison with commercial samples investigated.     

One-step flame method for the synthesis of coated composite nanoparticles

A simple in situ flame coating method has been developed by designing a new type of coflow diffusion flame burner having a sliding unit. The sliding unit was shown to be very effective in finding a right position where the precursor for coating layer should meet with core particles. SiO₂-coated TiO₂ nanoparticles were first prepared and whether most surfaces of particles were coated was examined by both direct observation of particles through a transmission electron microscope and Zeta potential measurements. Mean core sizes varied from 28 to 109 nm and mean coating thickness was about 2.4 nm for silica-coated titania particles. By simply changing chemical precursors, we demonstrated that SiO₂-coated SnO₂, SnO₂-coated TiO₂, SiO₂–SnO₂-coated TiO₂ nanoparticles could be also synthesized.     

Experimental and statistical analysis of dielectric barrier discharge plasma effect on sonochemically TiO2 coated cotton fabric using complete composite design

A single step ultrasonic biosynthesis method was used to synthesize and coat TiO₂ nanoparticles onto DBD plasma functionalized raw cotton. Titanium isopropoxide was reduced with aloe vera plant extract into TiO₂ nanoparticles. The effect of DBD plasma treatment on self-cleaning property of TiO₂ coated fabric was optimized statistically by using a complete composite design. To induce functional groups on the cotton fabric surface, the fabric was pre-treated with DBD plasma over various periods of time. The plasma exposure time, molarity of solution and ultrasonication time were optimized using complete composite design package. TiO₂ nanoparticles revealed spherical shape and anatase phase with average crystallite size of 10.46 nm. The statistically optimized plasma exposure time, molarity and sonication time was 7 min, 0.80 and 75 min, respectively. The plasma activation of fabric significantly improved the adsorption, tensile strength and self-cleaning ability of TiO₂ coated fabric.     

The effect of the deposition parameters on size, distribution and antimicrobial properties of photoinduced silver nanoparticles on titania coatings

Controlled photodeposition of silver nanoparticles (AgNP) on titania coatings using two different sources of UV light is described. Titania (anatase) thin films were prepared by the sol-gel dip-coating method on silicon wafers. AgNPs were grown on the titania surface as a result of UV illumination of titania films immersed in aqueous solutions of silver nitrate. UV xenon lamp or excimer laser, both operating at the wavelength 351 ± 5 nm, was used as illumination sources. The AFM topography of AgNP/TiO₂ nanocomposites revealed that silver nanoparticles could be synthesized by both sources of illumination, however the photocatalysis carried out by UV light from xenon lamp illumination leads to larger AgNP than those synthesized using the laser beam. It was found that the increasing concentration of silver ions in the initial solution increases the number of Ag nanoparticles on the titania surface, while longer time of irradiation results the growth of larger size nanoparticles. Antibacterial tests performed on TiO₂ covered by Ag nanoparticles revealed that increasing density of nanoparticles enhances the inhibition of bacterial growth. It was also found that antibacterial activity drops by only 10-15% after 6 cycles compared to the initial use.     

Formation of titania composite coatings on carbon steel by plasma electrolytic oxidation

Titania composite coatings were prepared on carbon steel by plasma electrolytic oxidation in silicate electrolyte and aluminate electrolyte with titania powers doping in the electrolytes. The microstructure of the coatings was characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD). The properties of the coatings including bond strength, thickness, thermal shock resistance and corrosion resistance varying with the quantities of titania powers in the electrolytes were studied. Investigation results revealed that the coating obtained in silicate electrolyte was composed of anatase-TiO₂, rutile-TiO₂ crystal phases and some Fe, Si, P elements; coating obtained in aluminate electrolyte consisted of anatase-TiO₂, Al₂TiO₅ and some Fe, P elements. Coatings obtained in two types of electrolytes show porous and rough surface. With increasing the concentration of titania powers in the electrolytes, the coating surface first became more compact and less porous and then became more porous and coarse. The bond strength and thickness were not strongly affected by concentration of titania powers in electrolytes. The valves were 23 MPa and for 66 μm for coatings obtained in aluminate electrolyte, and 21 MPa and 35 μm for coatings obtained in silicate electrolyte. Coatings obtained in silicate electrolyte showed a little better thermal shock resistance than those obtained in aluminate electrolyte and the best coatings were obtained with middle concentration of titania powers in the electrolytes. All coated samples showed better corrosion resistance than the substrate in 3.5 wt% NaCl solution. The best coatings were also obtained with middle concentration of titania powers doping in both electrolytes whose corrosion current density was decreased by 2 orders of magnitude compared with the substrate.     

TiO2 thick films supported on reticulated macroporous Al2O3 foams and their photoactivity in phenol mineralization

TiO₂ thick films deposited on macroporous reticulated Al₂O₃ foams with pore size of 10 ppi and 15 ppi were prepared using dip coating from slurries of Aeroxide^® P25 nanopowder and precipitated titania. All prepared films have sufficiently good adhesion to the surface of the substrate also in case of strongly cracked films. No measurable release of deposited TiO₂ after repeated photocatalytic cycles was observed. The photocatalytic activity was characterized as the rate of mineralization of aqueous phenol solution under irradiation of UVA light by TOC technique. The best activity was obtained with Aeroxide^® P25 coated Al₂O₃ foam with the pore size of 10 ppi, annealed at 600 °C. The optimal annealing temperature for preparation of films from precipitated titania could be determined at 700 °C. Films prepared by sol-gel deposition technique were considerably thinner compared to coatings made of suspensions and their photocatalytic activity was significantly smaller.     

Photocatalytic characterization of silica coated titania nanoparticles with tunable coatings

Photocatalytic experiments were conducted using the silica coated titania nanoparticles with tunable coatings to photocatalytically degrade methyl orange in water solutions. When the silica loading on titania nanoparticles was 4.67 wt%, the silica coating layer was incomplete and the photocatalytic activity of coated nanoparticles was higher than titania nanoparticles. However, when the silica loading on titania nanoparticles increased to 9.33 wt%, the thickness of silica coatings was 1.5 nm and the photocatalytic activity of coated nanoparticles sharply decreased. When the silica loading on titania nanoparticles increased to 25.19 wt%, the coated nanoparticles still exhibited a certain photacatalytic activity due to the porosity of silica coatings. The change of the effective tiania surface area available for methyl orange caused by silica coatings and the dispersion stability were used to explain the difference in photocatalytic activity.     

Surface modification of titanium by nano-TiO2/HA bioceramic coating

A nano-TiO₂/hydroxyapatite composite bioceramic coating was developed and applied to the surfaces of pure titanium discs by the sol-gel method. A TiO₂ anatase bioceramic coating was utilized in the inner layer, which could adhere tightly to the titanium substrate. A porous hydroxyapatite (HA) bioceramic coating was utilized in the outer layer, which has higher solubility and better short-term bioactivity. Conventional HA coatings and commercially pure titanium were used as controls. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were employed to characterize the crystallization, surface morphology, and thickness of the coatings. The bioactivities of the coatings were evaluated by in vitro osteoblast cultures. Results showed that the nano-TiO₂/HA composite bioceramic coating exhibited good crystallization and homogeneous, nano-scale surface morphology. In addition, the nano-TiO₂/HA coating adhered tightly to the substrate, and the in vitro osteoblast cultures exhibited satisfactory bioactivity.     

银/二氧化钛核壳纳米颗粒对碲化镉纳米晶的荧光增强研究

利用新合成的复合纳米结构银/二氧化钛核壳纳米颗粒,研究了金属银纳米颗粒对碲化镉纳米晶层荧光的增强情况.结果表明,这种新型复合金属纳米结构能极大地增强发光纳米晶层的荧光强度.银/二氧化钛核壳纳米颗粒是以水合肼、硝酸银和四异丙氧基钛为原材料,利用胶体化学法在水溶液中合成.透射电子显微镜图片表明这种新合成的银/二氧化钛纳米材料基本上呈球形,有较为明显的核壳结构,中间黑色的核是银纳米颗粒,外层颜色较浅部分是二氧化钛壳层.另外,包裹二氧化钛壳层后,银纳米颗粒的表面等离子吸收带从409 nm红移至430 nm,也证实了这种新型核壳纳米材料的形成.将此合成方法得到的银/二氧化钛纳米颗粒和碲化镉纳米晶用旋转涂覆方法进行直接组合后,得到了银纳米颗粒对碲化镉纳米晶荧光的明显增强,并对其增强的物理过程进行了讨论.这种能够增强荧光团发光的新型复合银纳米结构将在发光器件、荧光成像、生物探测等方面具有一定的应用价值.     

The dispersion study of TiO2 nanoparticles surface modified through plasma polymerization

In this study, the surface of TiO₂ nanoparticles was modified through plasma polymerization, which is a dry coating method at room temperature. The surface morphology of TiO₂ nanoparticles was characterized by high-resolution transmission electron microscope (HRTEM). The dispersion behavior of TiO₂ nanoparticles in water and ethyl glycol was investigated by laser size distribution and ultraviolet–visible absorption spectrum. TiO₂ nanoparticles were coated with a thin film through plasma polymerization, which prevents the agglomeration and improves the dispersion behavior of TiO₂ nanoparticles.     

Structural study of sol-gel Au/TiO2 films from nanopowders

TiO₂ represents one of the most important sol-gel materials, due to its photocatalytic properties, in the case of both powders and coatings. Nanostructured titania has been reported to be used in many applications in different fields ranging from optics to gas sensor via solar energy. Recent researches point out the existence of new procedures used in order to enhance the efficiency of the photocatalytic process. The metal ion doping is such an example. Two types of 2 wt.% Au containing TiO₂ powders have been embedded in sol-gel vitreous TiO₂ matrices. Au-doped TiO₂ films have been prepared from these sols, by dipping procedure using quartz microscopic slides, as substrates. The relationship between the synthesis conditions and the properties of titania nanosized materials, such as thermal stability, phase composition, crystallinity, and the influence of dopant was investigated. The hydrophilic properties of the films were correlated with their structure, composition and surface morphology.     

Photocatalytic characterization of silica coated titania nanoparticles with tunable coatings

Photocatalytic experiments were conducted using the silica coated titania nanoparticles with tunable coatings to photocatalytically degrade methyl orange in water solutions. When the silica loading on titania nanoparticles was 4.67 wt%, the silica coating layer was incomplete and the photocatalytic activity of coated nanoparticles was higher than titania nanoparticles. However, when the silica loading on titania nanoparticles increased to 9.33 wt%, the thickness of silica coatings was 1.5 nm and the photocatalytic activity of coated nanoparticles sharply decreased. When the silica loading on titania nanoparticles increased to 25.19 wt%, the coated nanoparticles still exhibited a certain photacatalytic activity due to the porosity of silica coatings. The change of the effective tiania surface area available for methyl orange caused by silica coatings and the dispersion stability were used to explain the difference in photocatalytic activity.This revised version was published online in August 2005 with a corrected issue number.     

Microstructure and corrosion behavior of coated AZ91 alloy by microarc oxidation for biomedical application

Magnesium and its alloy currently are considered as the potential biodegradable implant materials, while the accelerated corrosion rate in intro environment leads to implant failure by losing the mechanical integrity before complete restoration. Dense oxide coatings formed in alkaline silicate electrolyte with and without titania sol addition were fabricated on magnesium alloy using microarc oxidation process. The microstructure, composition and degradation behavior in simulated body fluid (SBF) of the coated specimens were evaluated. It reveals that a small amount of TiO₂ is introduced into the as-deposited coating mainly composed of MgO and Mg₂SiO₄ by the addition of titania sol into based alkaline silicate electrolytic bath. With increasing concentration of titania sol from 0 to 10 vol.%, the coating thickness decreases from 22 to 18 μm. Electrochemical tests show that the E_corr of Mg substrate positively shifted about 300500 mV and i_corr lowers more than 100 times after microarc oxidation. However, the TiO₂ modified coatings formed in electrolyte containing 5 and 10 vol.% titania sol indicate an increasing worse corrosion resistance compared with that of the unmodified coating, which is possibly attributed to the increasing amorphous components caused by TiO₂ involvement. The long term immersing test in SBF is consistent with the electrochemical test, with the coated Mg alloy obviously slowing down the biodegradation rate, meanwhile accompanied by the increasing damage trends in the coatings modified by 5 and 10 vol.% titania sol.     

Low-temperature biomimetic formation of apatite/TiO2 composite coatings on Ti and NiTi shape memory alloy and their characterization

Through a low temperature process, a bilayer composite coating was formed on Ti and NiTi shape memory alloy (SMA). The composite coating consisted of a layer of titania, which was formed using a H₂O₂-oxidation and hot water aging technique, and a layer of apatite, which was formed through an accelerated biomimetic process by immersing as-oxidized metals in a high-strength simulated body fluid (5SBF). Various techniques including X-ray diffraction, scanning electron microscopy and energy dispersive X-ray spectroscopy were used to characterize the surfaces of samples at different stages of coating formation and the coatings formed. Bioactive apatite/TiO₂ coatings could be formed on NiTi SMA and firmly bonded to the metal substrate. But there were differences for the formation of the composite coating on Ti and NiTi SMA substrates. The composite coatings formed will render both metals bioactive and hence bone-bonding.     

Preparation and Characterization of Poly(Methyl Methacrylate) Coated TiO2 Nanoparticles

Titanium dioxide (TiO₂) nanoparticles were modified with poly(methyl methacrylate) (PMMA) to improve the dispersion stability of the nanoparticles in a dielectric medium and to reduce the density mismatch between TiO₂ and a dielectric medium for a microcapsule‐type electrophoretic display application. Nanoparticles were coated with PMMA by in situ dispersion polymerization. The PMMA‐coated TiO₂ nanoparticles were characterized by fourier transform‐infrared spectrometrey (FT‐IR), electrophoretic light scattering (ELS), and scanning electron microscopy (SEM). Density of PMMA‐coated TiO₂ nanoparticles was found to be dependent on the thickness of the PMMA coating on the nanoparticles. An increase of thermal stability of the PMMA layer and the contents of PMMA on the surface of the nanoparticles were measured via thermogravimetric analysis (TGA).     

Optically transparent, superhydrophobic methyltrimethoxysilane based silica coatings without silylating reagent

The superhydrophobic surfaces have drawn lot of interest, in both academic and industries because of optically transparent, adherent and self-cleaning behavior. Surface chemical composition and morphology plays an important role in determining the superhydrophobic nature of coating surface. Such concert of non-wettability can be achieved, using surface modifying reagents or co-precursor method in sol-gel process. Attempts have been made to increase the hydrophobicity and optical transparency of methyltrimethoxysilane (MTMS) based silica coatings using polymethylmethacrylate (PMMA) instead of formal routes like surface modification using silylating reagents. The optically transparent, superhydrophobic uniform coatings were obtained by simple dip coating method. The molar ratio of MTMS:MeOH:H₂O was kept constant at 1:5.63:1.58, respectively with 0.5 M NH₄F as a catalyst and the weight percent of PMMA varied from 1 to 8. The hydrophobicity of silica coatings was analyzed by FTIR and contact angle measurements. These substrates exhibited 91% optical transmittance as compared to glass and water drop contact angle as high as 171 ± 1°. The effect of humidity on hydrophobic nature of coating has been studied by exposing these films at relative humidity of 90% at constant temperature of 30 °C for a period of 45 days. The micro-structural studies carried out by transmission electron microscopy (TEM).     

Excimer laser processing as a tool for photocatalytic design of sol-gel TiO2 thin films

Nanostructured sol-gel TiO₂ thin films spin coated on silicate glass plates are subjected to excimer (KrF^*) pulsed laser irradiation in order to tailor their structure and photocatalytic properties. The surface morphology of virgin and laser-processed films are followed applying electron optical imaging and atomic force microscopy. The evolution of the surface roughness and pore formation are shown to be accompanied by optical absorption edge shift to infrared wavelength range. Conventional X-ray diffraction analysis and high-resolution transmission electron imaging are applied in order to obtain information on the phase composition. Co-existence of amorphous and anatase TiO₂ phases in nonirradiated sol-gel films is found. It is established that after laser processing the most intense XRD anatase peak is shifted to lower 2θ range. The analysis of high-resolution transmission electron images of film profiles evidences for the laser induced phase transitions. Formation of rutile and brookite TiO₂ accompanied by evolution of oxygen deficient Ti_nO_2n−1 phases are identified in the subsurface region. The contribution of laser processing for increasing the photocatalytic efficiency of laser-modified films toward the oxidation of methylene blue water solution is demonstrated. The results obtained reveal a novel-processing route for designing sol-gel titania films with improved photocatalytical activity.     

Elaboration and characterization of TiO2 nanoparticles incorporated in SiO2 host matrix

Nanometer-scale TiO₂ particles have been synthesized by sol-gel method. It was incorporated in a glass-based silica aerogel. The composite was characterized by various techniques such as particle size analysis, scanning electron microscopy (SEM), atomic force microscopy (AFM), transmission electron microscopy (TEM), X-ray diffraction (XRD), infrared spectroscopy (IR) and photoluminescence (PL). The bulk glass presents a strong luminescence at wavelengths ranging from 750 to 950 nm. This PL was attributed to various non-bridging oxygen hole centers (NBOHCs) defects resulting from thermal treatment and crystallization of TiO₂ at the interface between titania nanoparticles and silica host matrix.     

Irradiation effect of low-energy ion on polyurethane nanocoating containing metal oxide nanoparticles

Irradiation effect of low-energy ion beam has been investigated on nanocoating developed with silica, titania and silica–titania core–shell nanoparticles embedded in an organic binder for nanopaint application. In this work, we have taken polyurethane as a model organic binder. Silica nanoparticles have been prepared through sol–gel synthesis with a particle size of 85?nm. Titania and core–shell nanoparticles have been prepared through both sol–gel and peptization process. Particle sizes obtained were 107?nm for titania and 240?nm for core–shell nanoparticles prepared through sol–gel process and 75?nm for TiO₂ and 144?nm for core–shell nanoparticles prepared through peptization process. The coating formulations were developed with the above nanoparticles individually and nanoparticle concentration was varied from 1 to 6?wt% and the best performance in terms of hydrophobicity was obtained with 4?wt % of the nanoparticles in polyurethane coating formulation. All the coating formulations prepared were applied on a glass substrate and dried at 100°C. The dry film thickness obtained was around 100?µm in each case. These films dried on glass substrate were irradiated by nitrogen and argon ion beam with energy of 26?keV at fluences of 10¹⁴ to 10¹⁶?ions/cm². The anti-algal property of the irradiated samples was improved and hydrophobicity was reduced.