Preparation and characterization of polystyrene/Ag core-shell microspheres--a bio-inspired poly(dopamine) approach

In this work, we have systematically investigated the formation and characterization of Self-assembled Monolayer (SAM) films of several silanes on indium tin oxide (ITO) surfaces. Silane molecules having different domains namely substrate binding domain (siloxanes), electron transport region (aliphatic and aromatic spacer) and terminal functional groups (-SH, -CH(3) groups) are employed for the study in order to tune the electron transfer (ET) behaviour across SAM modified electrode-electrolyte interface. Structural characterization of these monolayer films is carried out using X-ray photoelectron spectroscopy (XPS) studies. Wettability (hydrophilic and hydrophobic nature) of such modified electrodes is evaluated using contact angle measurements. ET behaviour of these modified electrodes is investigated by electrochemical techniques namely cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) using K(4)Fe(II)(CN)(6)|K(3)Fe(III)(CN)(6) redox couple as a probe. Disappearance of redox peaks in the CV measurements and formation of semicircle having a higher charge transfer resistance (R(ct)) values during EIS studies suggest that the resultant monolayer films are compact, highly ordered with very low defects and posses good blocking property with less pinholes. The heterogeneous ET rate constant (k) values are determined from EIS by fitting them to an appropriate equivalent circuit model. Based on our results, we comment on tuning the ET behaviour across the interface by a proper choice of spacer region.     

Ultrafast photoinduced charge separation dynamics in polythiophene/SnO2 nanocomposites

We present a study of photoinduced interfacial electron transfer (ET) dynamics of SnO2 nanocrystalline thin films sensitized by polythiophene derivatives (regioregular poly(3-hexylthiophene) (P3HT) and regiorandom poly(3-undecyl-2,2'-bithiophene) (P3UBT)). ET dynamics were measured by following the dynamics of injected electrons in SnO2 and polarons in the conjugated polymer using ultrafast mid-IR transient absorption spectroscopy. The rate of electron transfer from P3HT and P3UBT to SnO2 films was determined to occur on sub-picosecond time scale (120 +/- 20 fs). In P3HT/SnO2 composite, interchain charge transfer was found to compete with and reduce the quantum efficiency of interfacial electron transfer at high polymer loading. This interchain charge separation processes can be reduced in non-regioregular polymer or at low polymer loading levels.     

Comparison of electron injection dynamics from re-bipyridyl complexes to TiO2 nanocrystalline thin films in different solvent environments

Factors that control photoinduced interfacial electron transfer (ET) between molecular adsorbates and semiconductor nanoparticles have been intensely investigated in recent years. In this work, the solvent dependence of interfacial ET was studied by comparing ET rates in dye sensitized TiO2 nanocrystalline films in different solvent environments. Photoinduced ET rates from Re(LA)(CO)3Cl [LA=dcbpy=4,4'-dicarboxy-2,2'-bipyridine] (ReC1A) to TiO2 nanocrystalline thin films in air, pH buffer, MeOH, EtOH, and DMF were measured by femtosecond transient IR spectroscopy. The ET rates in these solvent environments were noticeably different. However, differences between the rates in pH buffer and nonaqueous solvents (MeOH, EtOH, and DMF) were much smaller than the values expected from much more negative TiO2 conduction band-edge positions in the latter solvents under anhydrous conditions. It was suggested that the presence of adsorbed water, which was evident in FTIR spectra, lowered the band edge of TiO2 in these solvents and reduced the rate differences. The important effect of adsorbed water was verified by comparing two samples of Re(LP)(CO)3Cl [LP=2,2'-bipyridine-4,4'-bis-CH2PO(OH)2] sensitized TiO2 in DMF, in which the presence of a trace amount of water was found to significantly increase the injection rate.     

Enzymatically modified peptide surfaces: towards general electrochemical sensor platform for protein kinase catalyzed phosphorylations

We hereby present an electrochemical approach for monitoring the three protein kinases sarcoma-related kinase (Src), extracellular signal-regulated kinase 1 (Erk1), and cyclin A-dependent kinase 2 (CDK2/cyclin A). The electrochemical sensor is based on the ability of kinases to transfer a redox-labeled phosphoryl group to surface-bound peptides that are highly specific substrates for the particular protein kinase (EGIYDVP, EPLTPSG, and HHASPRK, respectively). The detection method relies on the use of 5'-γ-ferrocenoyl-ATP (Fc-ATP) as a co-substrate for peptide phosphorylation. The peptides themselves are attached to a Au substrate, which acts as the working electrode. In this process a Fc-phosphoryl group is transferred to the peptide and the presence of the redox active Fc group is detected electrochemically. All peptide films were fully characterized by cyclic voltammetry (CV), square wave voltammetry (SWV), and electrochemical impedance spectroscopy (EIS). Particular attention was given to the electron transfer rates, k(ET), in peptide films after Fc-phosphorylation which were found to be on the order of seconds. The slow ET kinetics is presumably a result of the negative charge on the phosphoryl group. Time-of-flight secondary ion mass spectrometry (TOF-SIMS) and X-ray photoelectron spectroscopy (XPS) experiments based on the peptide modified Au surfaces reveal significant ferrocene and phosphate group content introduced using the kinase-catalyzed phosphorylation reaction.     

pH-dependent electron transfer from re-bipyridyl complexes to metal oxide nanocrystalline thin films

Photoinduced interfacial electron transfer (ET) from molecular adsorbates to semiconductor nanoparticles has been a subject of intense recent interest. Unlike intramolecular ET, the existence of a quasicontinuum of electronic states in the solid leads to a dependence of ET rate on the density of accepting states in the semiconductor, which varies with the position of the adsorbate excited-state oxidation potential relative to the conduction band edge. For metal oxide semiconductors, their conduction band edge position varies with the pH of the solution, leading to pH-dependent interfacial ET rates in these materials. In this work we examine this dependence in Re(L(P))(CO)3Cl (or ReC1P) [L(P) = 2,2'-bipyridine-4,4'-bis-CH2PO(OH)2] and Re(L(A))(CO)3Cl (or ReC1A) [L(A) = 2,2'-bipyridine-4,4'-bis-CH2COOH] sensitized TiO2 and ReC1P sensitized SnO2 nanocrystalline thin films using femtosecond transient IR spectroscopy. ET rates are measured as a function of pH by monitoring the CO stretching modes of the adsorbates and mid-IR absorption of the injected electrons. The injection rate to TiO2 was found to decrease by 1000-fold from pH 0-9, while it reduced by only a factor of a few to SnO2 over a similar pH range. Comparison with the theoretical predictions based on Marcus' theory of nonadiabatic interfacial ET suggests that the observed pH-dependent ET rate can be qualitatively accounted for by considering the change of density of electron-accepting states caused by the pH-dependent conduction band edge position.     

Radiation grafting of 4-vinylpyridine onto poly-tetrafluoroethylene-perfluorovinylether (TFA) and poly-tetrafluoroethylene-polyethylene (ET) films

Preparation of membranes of poly-(tetrafluoroethylene-perfluorovinylether (TFA) and poly-tetrafluoroethylene-polyethylene (ET) films grafted with 4-vinylpyridine using γ-rays has been carried out. The appropriate reaction conditions were selected. Furthermore, quaternization of the pyridine of the grafted chains was conducted. The effect of monomer concentration on the rate of grafting was also investigated. The order of the grafting rate gram per hour depending on monomer concentration was found to be 0.94 and 1.0 for TFA and ET films, respectively. Some selected properties of the grafted films such as swelling behavior, dimensional stability, mechanical and electrical properties were investigated. The grafted film of TFA and ET showed a marked decrease in elongation with a significant increase in the tensile strength.     

Ultrafast electron transfer between molecule adsorbate and antimony doped tin oxide (ATO) nanoparticles

Ultrafast transient IR spectroscopy has been used to examine the effect of doping on interfacial electron transfer (ET) dynamics in Re(dpbpy)(CO)(3)Cl (dpbpy = 4,4'-(CH(2)PO(OH)(2))2-2,2'-bipyridine) (ReC1PO(3)) sensitized ATO (Sb:SnO(2)) nanocrystalline thin films. In films consisting of particles with 0%, 2% and 10% Sb dopant, the rates of electron injection from the adsorbate excited state to ATO were independent of and the rates of the recombination increased with the doping level. The observed similar forward electron injection rates were attributed to negligible changes of available accepting states in the conduction band at the doping levels studied. The dependence of the recombination rate on conduction band electron density and a possible mechanism for the recombination process were discussed.     

Monolayer-protected nanoparticle film assemblies as platforms for controlling interfacial and adsorption properties in protein monolayer electrochemistry

Assembled films of nonaqueous nanoparticles, known as monolayer-protected clusters (MPCs), are investigated as adsorption platforms in protein monolayer electrochemistry (PME), a strategy for studying the electron transfer (ET) of redox proteins. Modified electrodes featuring MPC films assembled with various linking methods, including both electrostatic and covalent mechanisms, are employed to immobilize cytochrome c (cyt c) for electrochemical analysis. The background signal (non-Faradaic current) of these systems is directly related to the structure and composition of the MPC films, including nanoparticle core size, protecting ligand properties, as well as the linking mechanism utilized during assembly. Dithiol-linked films of Au225(C6)75 are identified as optimal films for PME by sufficiently discriminating against detrimental background current and exhibiting interfacial properties that are readily engineered for cyt c adsorption and electroactivity (Faradaic current). Surface concentrations and denaturation rates of adsorbed cyt c are dictated by specific manipulation of the individual MPCs composing the outer layer of the film. The use of specially designed, hydrophilic MPCs as a terminal film layer results in near-ideal cyt c voltammetry, attributed to a high degree of molecular level control of the necessary interfacial interactions and flexibility needed to create a uniform and effective binding of protein across large areas of a substrate. The electrochemical properties of cyt c at MPC films, including ET rate constants that are unaffected by the large ET distance introduced by MPC assemblies, are compared to traditional strategies employing self-assembled monolayers to immobilize cyt c. The incorporation of nanoparticles as protein adsorption platforms has implications for biosensor engineering as well as fundamental biological ET studies.     

Photochemical electron transfer through [corrected] the interface of hybrid films of titania nano-sheets and mono-dispersed spherical mesoporous silica particles

Photochemical Electron Transfer (ET) between an organic dye, the porphyrin derivative TMPyP, and an electron acceptor, methyl viologen MV2+, have been investigated at the interface of two different inorganic films, i.e., layered titania nano-sheets (TNS) and a monolayer film of spherical and mono-dispersed mesoporous silica (sMPS) particles (ca. 0.5 microm). TMPyP ions were intercalated within the sMPS nano-cavities to form (TMPyP-sMPS) while MV2+ ions were intercalated into the TNS interlayers to form (MV2+-TNS). The (TMPyP-sMPS) and (MV2+-TNS) films were then stacked on a silica substrate in this order to form a (MV2+-TNS)/(TMPyP-sMPS) film and, upon UV light irradiation, ET could be induced. However, when this film was stacked inversely, i.e., for the (TMPyP-sMPS)/(MV2+-TNS) films on a silica substrate, no photoinduced ET were observed. Interestingly, however, even for this photo-inactive inversely stacked film, ET could be generated by inserting a gold vapor-deposited layer between the (MV2+-TNS) and (TMPyP-sMPS) films. The conjugation conditions at the interface of the inversely stacked (TMPyP-sMPS)/(MV2+-TNS) hybrid film were, thus, confirmed to strongly affect the photoinduced electron transfers and their efficiencies.     

Sensitively probing the cofactor redox species and photo-induced electron transfer of wild-type and pheophytin-replaced photosynthetic proteins reconstituted in self-assembled monolayers

An ultrathin, ordered, and packed protein film, consisting of the 2-mercaptoacetic acid (MAA), polydimethyldiallylammonium chloride (PDDA), and wild-type (WT) photosynthetic reaction center (RC; termed as WT-RC) or its pheophytin (Phe)-replaced counterpart (termed as Phe-RC), was fabricated by self-assembling technique onto gold electrode for facilitating the electron transfer (ET) between RC and the electrode surface. Near-infrared (NIR)-visible (Vis) absorption and fluorescence (FL) emission spectra revealed the influence of pigment substitution on the cofactors arrangement and excitation relaxation of the proteins, respectively. Square wave voltammetry (SWV) and photoelectric tests were employed to systematically address the differences between the WT-RC films and mutant ones on the direct and photo-induced ET. The electrochemical results demonstrated that ET initiated by the oxidation of the primary donor (P) was obviously slowed down, and the formed P⁺ had more population as well as more positive redox potential in the Phe-RC films compared with those in the WT ones. The photoelectrochemical results displayed the dramatically enhanced photoelectric performances of the mutant ones, further suggesting the slow-down formation of final charge-separated state in Phe-RC. The functionalized protein films introduced in this paper provided an efficient approach to sensitively probe the redox cofactors and ET differences resulting from only minor changes in pigment arrangement in the pigment–protein complex. The favored ET process observed for the membrane proteins RC was potentially valuable for a deep understanding of the multi-step biological ET process and development of versatile bioelectronic devices.     

Persistent electron-transfer state of a pi-complex of acridinium ion inserted between porphyrin rings of cofacial bisporphyrins

A free-base cofacial bisporphyrin, H(4)DPOx, forms a pi-complex with acridinium ion (AcH(+)) by pi-pi interaction in benzonitrile (PhCN). Formation of the H(4)DPOx-AcH(+) pi-complex was probed by UV-vis and NMR spectroscopy. The binding constant between AcH(+) and H(4)DPOx is determined as 9.7 x 10(4) M(-)(1). Photoinduced electron transfer (ET) from the H(4)DPOx to the AcH(+) moiety occurred efficiently in the pi-complex to form the ET state (H(4)DPOx(*)(+)-AcH(*)). The ET state is successfully detected by laser flash photolysis. The lifetime of the ET state is 18 mus in PhCN at 298 K, and the quantum yield of the ET state is 90%. The temperature dependence of the ET state lifetime has been examined in the range from 273 to 353 K. The ET state lifetime exhibited a large temperature dependence, and the linear plot of ln(k(BET)T(1/2)) vs T(-)()(1), in accordance with the Marcus equation, affords the ET reorganization energy (0.54 eV). As a result, a remarkably long-lived ET state has been attained at low temperature, and virtually no decay of the ET state was observed at 77 K. Such an extremely long-lived ET state is indeed detected by steady-state UV-vis absorption spectroscopy.     

Solvent isotope effects on interfacial protein electron transfer in crystals and electrode films

D(2)O-grown crystals of yeast zinc porphyrin substituted cytochrome c peroxidase (ZnCcP) in complex with yeast iso-1-cytochrome c (yCc) diffract to higher resolution (1.7 A) and pack differently than H(2)O-grown crystals (2.4-3.0 A). Two ZnCcP's bind the same yCc (porphyrin-to-porphyrin separations of 19 and 29 A), with one ZnCcP interacting through the same interface found in the H(2)O crystals. The triplet excited-state of at least one of the two unique ZnCcP's is quenched by electron transfer (ET) to Fe(III)yCc (k(e) = 220 s(-1)). Measurement of thermal recombination ET between Fe(II)yCc and ZnCcP+ in the D(2)O-treated crystals has both slow and fast components that differ by 2 orders of magnitude (k(eb)(1) = 2200 s(-1), k(eb)(2) = 30 s(-1)). Back ET in H(2)O-grown crystals is too fast for observation, but soaking H(2)O-grown crystals in D(2)O for hours generates slower back ET, with kinetics similar to those of the D(2)O-grown crystals (k(eb)(1) = 7000 s(-1), k(eb)(2) = 100 s(-1)). Protein-film voltammetry of yCc adsorbed to mixed alkanethiol monolayers on gold electrodes shows slower ET for D(2)O-grown yCc films than for H(2)O-grown films (k(H) = 800 s(-1); k(D) = 540 s(-1) at 20 degrees C). Soaking H(2)O- or D(2)O-grown films in the counter solvent produces an immediate inverse isotope effect that diminishes over hours until the ET rate reaches that found in the counter solvent. Thus, D(2)O substitution perturbs interactions and ET between yCc and either CcP or electrode films. The effects derive from slow exchanging protons or solvent molecules that in the crystal produce only small structural changes.     

一种含乙氧羰基偶氮苯液晶三嵌段共聚物的合成与表征

利用原子转移自由基聚合(ATRP),合成了一种含有乙氧羰基偶氮苯的液晶三嵌段共聚物,并合成了一种同样偶氮生色团的均聚物进行对比.均聚物(PC6ET)由偶氮单体甲基丙烯酸{6-[4-(4-乙氧羰基苯基偶氮)苯氧基]己酯}(C6ET)的ATRP反应制备.嵌段共聚物的合成,先通过聚环氧乙烷(PEO)和过量的2-溴异丁酰溴、三乙胺反应,得到双端大分子引发剂(Br-PEO-Br);再进一步通过C6ET的ATRP反应,得到了三嵌段共聚物(PC6ET-PEO-PC6ET).热分析、偏光显微镜观察和X射线衍射实验证实,合成的均聚物和嵌段共聚物均为近晶型液晶聚合物.三嵌段共聚物的液晶清亮点比均聚物的稍低.     

Redox mediation at 11-mercaptoundecanoic acid self-assembled monolayers on gold

Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and digital simulation techniques were used to investigate quantitatively the mechanism of electron transfer (ET) through densely packed and well-ordered self-assembled monolayers (SAMs) of 11-mercaptoundecanoic acid on gold, either pristine or modified by physically adsorbed glucose oxidase (GOx). In the presence of ferrocenylmethanol (FcMeOH) as a redox mediator, ET kinetics involving either solution-phase hydrophilic redox probes such as [Fe(CN)6]3-/4- or surface-immobilized GOx is greatly accelerated: [Fe(CN)6]3-/4- undergoes diffusion-controlled ET, while the enzymatic electrochemical conversion of glucose to gluconolactone is efficiently sustained by FcMeOH. Analysis of the results, also including the digital simulation of CV and EIS data, showed the prevalence of an ET mechanism according to the so-called membrane model that comprises the permeation of the redox mediator within the SAM and the intermolecular ET to the redox probe located outside the monolayer. The analysis of the catalytic current generated at the GOx/SAM electrode in the presence of glucose and FcMeOH allowed the high surface protein coverage suggested by X-ray photoelectron spectroscopy (XPS) measurements to be confirmed.     

Evolution of fluorescence resonance energy transfer between close-packed CdSeS quantum dots under two-photon excitation

Energy transfer (ET) processes between quantum dots (QDS) were investigated by means of steady-state and time-resolved up-conversion luminescence measurements. Two types of CdSeS QDs with different Se/S molar ratios at the similar sizes of ~4.5 nm emit green and orange up-conversion luminescence at infrared laser excitation, separately. The power dependence and nanosecond luminescent decays of QDs films demonstrated that up-conversion luminescence was attributed to two-photon absorption and ET process occurred from green-emitting QDs to orange-emitting QDs. The ET rate was estimated quantitatively to be 0.03 ns(-1) by Dexter theory. The decrease of ET rate is due to Se doped substituted in the Sulfur sites. The band-edge excitonic state is predominating at the initial time evolution and responsible for peak shift and ET. The surface emission of orange-emitting QDs becomes slower, and is attributed to the trapping of electrons from QDs donors.     

Dynamics of Electron Transfers in Photosensitization Reactions of Zinc Porphyrin Derivatives

Photocatalytic systems for CO₂ reduction operate via complicated multi-electron transfer (ET) processes. A complete understanding of these ET dynamics can be challenging but is key to improving the efficiency of CO₂ conversion. Here, we report the ET dynamics of a series of zinc porphyrin derivatives (ZnPs) in the photosensitization reactions where sequential ET reactions of ZnPs occur with a sacrificial electron donor (SED) and then with TiO₂. We employed picosecond time-resolved fluorescence spectroscopy and femtosecond transient absorption (TA) measurement to investigate the fast ET dynamics concealed in the steady-state or slow time-resolved measurements. As a result, Stern-Volmer analysis of fluorescence lifetimes evidenced that the reaction of photoexcited ZnPs with SED involves static and dynamic quenching. The global fits to the TA spectra identified much faster ET dynamics on a few nanosecond-time scales in the reactions of one-electron reduced species (ZnPs^•–) with TiO₂ compared to previously measured minute-scale quenching dynamics and even diffusion rates. We propose that these dynamics report the ET dynamics of ZnPs^•– formed at adjacent TiO₂ without involving diffusion. This study highlights the importance of ultrafast time-resolved spectroscopy for elucidating the detailed ET dynamics in photosensitization reactions.     

Effect of the functionalization of the axial phthalocyanine ligands on the energy transfer in QD-based donor-acceptor pairs.

This study examines the electronic coupling between quantum dots (QDs) and molecules on their surfaces as a function of the modality of their interaction. As a probe, the energy transfer (ET) between CdSe QDs and phthalocyanines (Pcs) was monitored and evaluated with regard to the functionalization of the axial phthalocyanine ligand, bulkiness of the functional group bridging the QD donor and Pc acceptor, and the number of the functionalized axial ligands. New silicon PCs and their conjugates with CdSe QDs were synthesized. The ET efficiency and kinetics were studied by steady state and femtosecond time-resolved absorption spectroscopy. We observed a decrease in ET efficiency with the increase in functional group bulkiness, which could be explained by increasing steric hindrance between the ET pair. In addition, a higher ET efficiency was observed for amino and thiol functionalized Pcs compared to Pcs without functional group on the axial alkyl chain.     

Mimicking primary processes in photosynthesis—covalently linked porphyrin quinones

Porphyrin quinones (P-Qs), covalently linked via different aliphatic bridges, have been synthesized and studies in their (porphyrin) cationic and (semiquinone) anionic radical states by EPR, ENDOR and TRIPLE resonance techniques. Electron transfer (ET) from the porphyrin donor to the quinone acceptor could be observed by time-resolved picosecond fluorescence spectroscopy (singlet ET) and by time-resolved EPR spectroscopy (triplet ET) in isotropic fluid solution and in anisotropic media (liquid crystals and reversed micelles). Steady-state in situ photoexcitation of P-Qs in CTAB cationic reversed micelles yielded the corresponding semiquinone radical anions. In TRITON X-100 reversed micelles both the radical cation of the porphyrin and the radical anion of the semiquinone could be detected, which occured in complete emission. In covalently linked porphyrin flavins ET from the photoexcited porphyrin fragment to the flavin and, in addition, energy transfer from the photoexcited flavin to the porphyrin could be observed.     

Effect of the Functionalization of the Axial Phthalocyanine Ligands on the Energy Transfer in QD-based Donor–Acceptor Pairs

This study examines the electronic coupling between quantum dots (QDs) and molecules on their surfaces as a function of the modality of their interaction. As a probe, the energy transfer (ET) between CdSe QDs and phthalocyanines (Pcs) was monitored and evaluated with regard to the functionalization of the axial phthalocyanine ligand, bulkiness of the functional group bridging the QD donor and Pc acceptor, and the number of the functionalized axial ligands. New silicon PCs and their conjugates with CdSe QDs were synthesized. The ET efficiency and kinetics were studied by steady state and femtosecond time-resolved absorption spectroscopy. We observed a decrease in ET efficiency with the increase in functional group bulkiness, which could be explained by increasing steric hindrance between the ET pair. In addition, a higher ET efficiency was observed for amino and thiol functionalized Pcs compared to Pcs without functional group on the axial alkyl chain.     

Interfacial electron transfer dynamics in dye-modified graphene oxide nanosheets studied by single-molecule fluorescence spectroscopy

Graphene oxide (GO) nanosheets have received a great deal of attention for a wide range of applications from optoelectronic devices to biological sensors. We now report a mechanistic study of the interfacial electron transfer (ET) processes between organic dye molecule, 9-phenyl-2,3,7-trihydroxy-6-fluorone (PF), and nanometre-sized GO sheets using ensemble-averaged and single-molecule spectroscopies. The ET dynamics was characterized by the direct observation of the PF radical cation during the laser flash photolysis, and its reaction rate was determined to be ~10(11) s(-1). The single-molecule fluorescence spectroscopy was utilized to clarify the heterogeneous nature of the interfacial ET within individual composites. Their fluorescence lifetimes and spectra were found to vary from composite to composite, possibly due to the different local structures and molecular interactions. The autocorrelation analysis of fluorescence intensity trajectories also revealed the temporal fluctuation of the ET reactivity.