The use of DMTA for predicting standard mechanical properties of developmental polyolefins

The correlation of linear data from dynamic-mechanical testing (DMTA) to nonlinear data from standard mechanical testing was attempted for a number of quite different polypropylene-based compositions. For limited composition ranges, correlations between storage modulus and stiffness as well as between loss angle integrals and impact strength could be achieved. Challenges in trying to correlate DMTA tests to standard mechanics clearly result from morphology effects at different scales, both in crystallinity and flow-induced superstructures (orientation) and in multiphase impact copolymers or composites. While a relative scaling turned out to be easy, absolute prediction is difficult.     

The role of monomer geometry on the properties of polyolefins: A numerical study

We explore the role of monomer geometry on the structural, dynamic, and thermodynamic properties of polyolefis by employing all-atom molecular dynamic simulations. Specifically, we compare properties of atactic polyolefins in the molten state including polypropylene (aPP), a short-chain branched polymer: poy(1-hexene) (aPH), and a polymer having cyclic olefins: poly(vinyl cyclobutane) (aPVCB). We find polymers having the same chain mass and atom composition (hydrocarbon-based molecules), but having different monomer architecture differ strongly in material properties. In particular, the polymer glass transition ( $T_{\mathrm{g}}$) and bulk modulus ( $B$) show higher values for aPVCB in comparison to aPP and aPH. This increase is caused by having the carbon atoms in a cyclic structure, making aPVCB achieve higher mass and energy densities. By contrast, adding linear short side chains to polymer backbones causes a reduction in $T_{\mathrm{g}}$ and $B$, since side chains make backbones displace each other reducing their packing and thus their mass and energy densities. More broadly, our numerical results suggest that the incorporation of VCB monomers to linear polyolefins will enhance their properties, opening the possibility for designing a new set of materials.     

The effects of a silane coupling agent on curing characteristics and mechanical properties of bamboo fibre filled natural rubber composites

The effects of a silane coupling agent on curing characteristics and mechanical properties of bamboo fibre filled natural rubber composites were studied. Scorch time, t₂ and cure time, t₉₀ of the composites decrease with increasing filler loading and with the presence of a silane coupling agent, Si69. Mooney viscosity also increases with increasing filler loading but at a similar filler loading shows lower value with the presence of Si69. The mechanical properties of composites viz tensile strength, tear strength, hardness and tensile modulus were also improved with the addition of Si69.     

Temperature dependence of the dynamic mechanical properties of filled polymers

A theory has been developed to explain the jump in the relative modulus of filled polymers near the glass transition temperature T_g and the subsequent decrease in relative modulus at temperatures above the glass transition temperature. The theory is based upon the concept that there are some particle–particle contacts in doublets and in agglomerates containing a larger number of particles. Below T_g motion of particles at the contact points is possible because of the high modulus of the polymer. At T_g particle–particle motion mostly ceases because of the low modulus of the polymer. At higher temperatures, the mismatch in the coefficients of expansion allows some motion to occur at points of contact and slippage may occur at the polymer–particle interfaces, so the modulus decreases. It is shown theoretically and experimentally that both the elastic modulus and the mechanical damping depend upon the nature of the surface of the particles.     

Highly enhanced electrical and mechanical properties of methyl methacrylate modified natural rubber filled with multiwalled carbon nanotubes

Developing conductive networks in a polymer matrix with a low percolation threshold and excellent mechanical properties is desired for soft electronics applications. In this work, natural rubber (NR) functionalized with poly(methyl methacrylate) (PMMA) was prepared for strong interfacial interactions with multiwalled carbon nanotubes (MWCNT), resulting in excellent performance of the natural rubber nanocomposites. The MWCNT and methyl methacrylate functional groups gave good filler dispersion, conductivity and tensile properties. The filler network in the matrix was studied with microscopy and from its non-linear viscoelasticity. The Maier-Göritze approach revealed that MWCNT network formation was favored in the NR functionalized with PMMA, with reduced electrical and mechanical percolation thresholds. The obvious improvement in physical performance of MWCNT/methyl methacrylate functionalized natural rubber nanocomposites was caused by interfacial interactions and reduced filler agglomeration in the NR matrix. The modification of NR with poly(methyl methacrylate) and MWCNT filler was demonstrated as an effective pathway to enhance the mechanical and electrical properties of natural rubber nanocomposites.     

Dynamic mechanical properties of polymers filled with agglomerated particles

The filler particles in most filled polymers are not perfectly dispersed but are more or less agglomerated. The degree of agglomeration and the strength of the agglomerates, which can be modified by surface treatments, have a very great effect on the dynamic mechanical properties. Filler agglomerates which are wetted by the polymer matrix produce higher elastic moduli than similar agglomerates which are not wetted. The relative damping in most filled polymers is very temperature-dependent. A qualitative explanation is given for this temperature dependence. The degree of agglomeration and the strength of the agglomerates are important factors in determining the damping.     

Influences of coupling agent on thermal properties, flammability and mechanical properties of polypropylene/thermoplastic polyurethanes composites filled with expanded graphite

In this study, polypropylene (PP)/thermoplastic polyurethanes (TPU) filled with inorganic intumescent flame retardant expanded graphite (EG) was prepared by melt blending in a twin-screw extruder. The thermal stability, fire retardancy, mechanical properties, and fracture morphology of PP/TPU composites with treated and untreated EG were investigated by thermogravimetric analysis, cone calorimeter, and scanning electron microscope. The results showed that both untreated and treated EG can greatly enhance the thermal stability and fire resistance of polymer matrix materials. Compared with untreated EG, treated EG can further improve the flame retardancy of the composites. For example, treated EG can further reduce the heat release rate, total heat release, and CO emissions of the composites in the combustion. Surface treatment of EG could significantly improve elongation at break and impact strength of PP/TPU/EG composites due to its enhanced interfacial adhesion and the good dispersion of EG particles in the polymer matrix.     

Autohesion and adhesion in filled elastomers,the role of mechanical breakdown processes

The paper discusses the influence of fillers on formation of the contact surface and on interface action in autohesive and adhesive joining of elastomers and plasticates. The formulated laws and effects refer to intensification of the mechanical breakdown of the elastomer during milling, accompanied by modification of its molecular structure as well as adsorption and binding of the macromolecules plus formation of elastomer-filler gels. The information shows that fillers are capable of either impairing or improving the autohesive and adhesive properties of the compound, according to the relative contribution of two opposing processes: reduction (to a certain limit) of the molecular weight, whereby the molecular contact is increased, and interdiffusion or adsorptive binding of the macromolecules accompanied by gel formation, whereby the autohesive and adhesive properties are impaired. The oxidation associated with mechanical breakdown intensifies interface action, but retards the rheological processes of contact-surface formation.     

Effect of silane coupling agent on the polymer‐filler interaction and mechanical properties of silica‐filled NR

The effects of filler loading and a new silane coupling agent 3‐octanoylthio‐1‐ propyltriethoxysilane (NXT silane) on the polymer‐filler interaction and mechanical properties of silica‐filled and carbon black‐filled natural rubber (NR) compounds were studied. Silica (high dispersion silica7000GR, VN2, and VN3) and carbon black (N330) were used as the fillers, and the loading range was from 0 to 50 phr. The loading of NXT silane was from 0 to 6 phr. Experimental results show that the maximum and minimum torques of silica and carbon black‐filled NR increase with increasing filler loading. With increasing filler loading, the scorch time and optimum cure time decrease for carbon black‐filled NR, but increase for silica‐filled NR. The minimum torque, scorch time, and optimum cure time decrease because of the presence of NXT silane. For the carbon black and silica‐filled NR, the tensile strength and elongation at break have maximum values, but the hardness, M300, M100, and tear strength keep increasing with filler loading. The mechanical properties of silica‐filled NR were improved in the presence of NXT silane. With increasing filler loading, the storage modulus of filled NR increases, but the loss factor decreases. Carbon black shows the strongest polymer‐filler interaction, followed by VN3, 7000GR, and VN2. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 573–584, 2005     

The effect of crosslinking on mechanical properties of ldpe filled with organic fillers

Mechanical properties of low density polyethylene filled with various organic fillers were investigated. Different effect of different fillers on the properties was observed and the effect of crosslinking of these materials is also different. Fine anisotropic fillers behave similarly as inorganic fillers. The effect of crosslinking is the highest for composites containing large particulate fillers like beech wood flour. The effects are discussed in terms of mechanical behaviour and crosslinking degree determined from extraction or equilibrium swelling data. A formation of covalent bonds between the filler surface and polymeric matrix is proposed as a result of crosslinking.     

Molecular interactions at the interface in blends of ester groups-functionalized polyolefins

Due to the apolarity of the aliphatic backbones, unmodified polyolefins are scarcely miscible with most of other polymers. The functionalization of preformed polyolefins is a way which has been successfully followed to improve the polymer miscibility. The functionalization of linear low density polyethylene (LLDPE) and ethylene-propylene copolymers (EP), with diethyl maleate (DEM) and dicumyl peroxide (DCP) as radical initiator, gives products containing up to 2–5 mol % of well defined functional groups (2-diethyl succinate). Intermolecular interactions of these functional groups are characterized by comparison with suitable low-molecular-weight structural models in the presence of different solvents containing acidic hydrogen atoms. On the basis of these indication evidences of interface molecular interactions in blends with halogenated polymers are described between the functionalized polyolefins and poly(vinyl chloride) (PVC), poly(vinylidene fluoride) (PVDF) or vinylidene fluoride-hexafluoropropene copolymer obtained in semiindustrial Brabender mixers. It is shown that a smooth functionalization of the polyolefins can modify the phase behaviour and structure of these systems. The FT-IR microanalysis supports the occurrence of partial miscibility phenomena which can be accounted for by specific intermolecular interactions involving the inserted functional groups and occurring mainly at the interfaces between domains of polyolefins and of the halogen-containing polymers.     

The efficiency of using fluorine-containing surfactants for property modification of polyurethanes filled with chalk

The efficiency of using fluorine-containing surfactants for increasing the sedimentation stability of filled compositions, uniformity of the disperse-phase distribution in oligomer, and hydrophobization of the cured polyurethane surface is shown.     

Barrier and mechanical properties of modified starches

The study addressed starch-based coatings on paper and fabrics. Coated materials and free starch films containing different amounts of a well-established plasticizer (glycerol) or potential plasticizer (mainly polyols) were tested with respect to water vapour permeance (WVPe), water vapour permeability (WVP), glass transition temperature (T_g), and mechanical strength (tensile tests). Both normal and high- amylose potato starch were used. These starches were modified by (a) oxidation, (b) oxidation and hydroxypropylation or (c) oxidation and hydrophobically modified by reaction with octenyl- or alkenyl-substituted succinic acid anhydride. Free films of hydroxypropylated high-amylose potato starch showed a lower WVP than did the corresponding starches based on regular potato starch. The WVP of the hydrophobically modified regular potato starches was substantially higher than that of films of the corresponding hydroxypropylated starches. The expected hydrophobic effect of the succinic acid anhydrides in terms of a reduced WVP could not be observed. When glycerol was used as a plasticizer, about 30 parts (by wt.) per hundred parts of starch were needed in order to reduce the T_g and to cause observable changes in the mechanical properties of the free films.     

Dynamic mechanical properties of epoxy/novolac system modified with reactive liquid rubber and carbon filler

This paper reports on the work carried out to evaluate the frequency dependent viscoelastic properties of epoxy/novolac compositons modified with a liquid reactive rubber and carbon filler. For epoxy systems modified with elastomer, three typical transitions were observed: the α-relaxation deeply related to the glass transition of epoxy, the β-transition of epoxy, and the glass transition of rubber appeared near to the β-relaxation of epoxy resin. Considering an Arrhenius equation, the activation energies of β-relaxation were estimated. In the region of glass transition and rubbery state the temperature dependence of the shift factor (α_T) was determined through Williams-Landel-Ferry (WLF) equation.     

Thickness of hydroxyapatite nanocrystal controls mechanical properties of the collagen-hydroxyapatite interface

Collagen-hydroxyapatite interfaces compose an important building block of bone structures. While it is known that the nanoscale structure of this elementary building block can affect the mechanical properties of bone, a systematic understanding of the effect of the geometry on the mechanical properties of this interface between protein and mineral is lacking. Here we study the effect of geometry, different crystal surfaces, and hydration on the mechanical properties of collagen-hydroxyapatite interfaces from an atomistic perspective, and discuss underlying deformation mechanisms. We find that the presence of hydroxyapatite significantly enhances the tensile modulus and strength compared with a tropocollagen molecule alone. The stiffening effect is strongly dependent on the thickness of the mineral crystal until a plateau is reached at 2 nm crystal thickness. We observe no significant differences due to the mineral surface (Ca surface vs OH surface) or due to the presence of water. Our result shows that the hydroxyapatite crystal with its thickness confined to the nanometer size efficiently increases the tensile modulus and strength of the collagen-hydroxyapatite composite, agreeing well with experimental observations that consistently show the existence of extremely thin mineral flakes in various types of bones. We also show that the collagen-hydroxyapatite interface can be modeled with an elastic network model which, based on the results of atomistic simulations, provides a good estimate of the surface energy and other mechanical features.     

Transformation of the modified layer of fluorinated polyolefins under stretching

The stress-strain properties of the fluorinated layer of polyolefin films are estimated. A comparison of the elastic moduli of fluorinated and original film samples of LDPE and HDPE shows that the surfacefluorinated films of polyolefins can be assigned to ??rigid coating on a soft support?? systems. Deformation of these multilayer films leads to a special type of superficial gelation with a characteristic regular relief. With allowance for this relief, it is possible to calculate the ultimate stress of the fluorinated layer for LDPE and HDPE films.     

Nanostructure and mechanical properties of polybutylacrylate filled with grafted silica particles

We investigate the nanostructure and the linear rheological properties of polybutylacrylate (PBA) filled with St?ber silica particles grafted with PBA chains. The silica volume fractions range from 1.8 to 4.7%. The nanostructure of these suspensions is investigated by small-angle neutron scattering (SANS), and we determine their spectromechanical behavior in the linear region. SANS measurements performed on low volume fraction composites show that the grafted silica particles are spherical, slightly polydisperse, and do not form aggregates during the synthesis process. These composites thus constitute model filled polymers. The rheological results show that introducing grafted silica particles in a polymer matrix results in the appearance of a secondary process at low frequency: for the lowest volume fractions, we observe a secondary relaxation that we attribute to the diffusion of the particles in the polymeric matrix. By increasing the silica volume fraction up to a critical value, we obtain gellike behavior at low frequency as well as the appearance of a structure factor on the scattering intensity curves obtained by SANS. Further increasing the silica particle concentration leads to composites exhibiting solidlike low-frequency behavior and to an enhanced structure peak on the SANS diagrams. This quantitative correlation between the progressive appearance of a solidlike rheological behavior, on one hand, and a structure factor, on the other hand, supports the idea that the viscoelastic behavior of filled polymers is governed by the spatial organization of the fillers in the matrix.     

The mechanical properties of LDPE composite filled with CF coated by dimethylamine treated TiO2

In order to improve the surface wettability of carbon fiber and enhance its composite interface performance, dimethylamine treated TiO2 was coated on carbon fiber (CF). The surface morphology, surface chemical state, and surface wettability of CF were characterized by SEM, XPS, and TEM tests, and the interlaminar shear strength (ILSS) and cross-sectional morphology tests were used to test the performance of CF/Low density polyethylene (LDPE) composites. The interface bonding status was analyzed and characterized. The results show that after the surface treatment of CF by dimethylamine treated TiO2, the O/C (atomic ratio) of the surface of CF is increased, and a certain amount of nano-scale small convex micro-mechanical structure is given, which improves the surface wetting of CF. The surface of the CF modified by the TiO2 is rough; the contact area between modified CF and LDPE increases.     

Study of physical and mechanical properties and combustibility of filled acrylate compositions

Compositions based on cross-linked acrylate copolymers and bentonites were obtained. Physical-mechanical and absorption characteristics of bentonite-polymeric composite materials were studied. The effect of a filling agent on the final product properties was demonstrated. The possibility of using these compositions for creating materials with reduced combustibility was shown.