RHEOLOCY OF AQUEOUS DISPERSIONS OF ALUMINA,TITANIA AND MIXTURE OF ALUMINA AND TITANIA POWDERS

The electrophoretic mobility and rheology of alumina, titania and alumina / titania powder mixtures ( ratio of alumina : titania 1 : 2 and 2 : 1 ) were investigated in aqueous suspensions in the pH range 3 - 10. The results suggest that the electrophoretic mobility of the individual powders is independent of the particle concentration, but the electrokinetic behavior of the powder mixture depends upon the concentration of the individual constituents. The rheology of all the suspensions is charge related and while alumina and alumina / titania ( ratio 2 : 1 ) flocculate at pH 9.0 both titania and alumina / titania ( ratio 1 : 2 ) form low viscous dispersions. Similarly while later dispersions flocculate at pH 5.6, the former dispersions behave as Newtonian type fluids. Better correlation between the slip rheology and the electrokinetic behavior of suspensions containing both alumina and titania powders can be obtained provided the experimental results are evaluated based upon the total surface area of the individual powders but not the particle concentration.     

SYNTHESIS OF POLYSTYRENE/TiO_2 CORE-SHELL MATERIALS

TiO_2-coated polystyrene nanoparticles were prepared in a simple way.First,functional PS particles were synthesized by copolymerizing one kind of polymerizable surfactant with styrene.Then the stable dispersions of polystyrene nanoparticles were used as templates,and polystyrene nanoparticles were coated with titania by in situ hydrolysis of tetra-n- butyl titanate (TBT).No surface treatment and centrifugation/redispersion cycle process were needed during the whole experiment.Isolated PS spheres with uni...     

SYNTHESIS OF POLYSTYRENE/TiO2 CORE-SHELL MATERIAL

 TiO₂-coated polystyrene nanoparticles were prepared in a simple way. First, functional PS particles were synthesized by copolymerizing one kind of polymerizable surfactant with styrene. Then the stable dispersions of polystyrene nanoparticles were used as templates, and polystyrene nanoparticles were coated with titania by in situ hydrolysis of tetra-n-butyl titanate (TBT). No surface treatment and centrifugation/redispersion cycle process were needed during the whole experiment. Isolated PS spheres with uniform coatings of titania were obtained when water concentration was lower than a certain level.     

Internal structure of nanoporous TiO2/polyion thin films prepared by layer-by-layer deposition

The internal structure of porous TiO2 films prepared by electrostatic layer-by-layer deposition was investigated. The films were prepared by alternate dipping of solid substrates into dispersions of TiO2 nanoparticles and polycations, polyanions, or pure buffer solution, respectively. The surface charge of the amphoteric TiO2 particles was controlled by the pH of the aqueous dispersions. The morphology of the film surface was investigated by means of scanning electron microscopy. It was found that the surface roughness strongly depends on the polymeric material used for the deposition process but is independent of the ionic strength of the solution or the molecular weight of the polyions. The samples with rough surfaces feature strong light scattering. The porosity and internal structure of the TiO2/polyelectrolyte films were investigated by adsorption/desorption of dye molecules. A crude estimate yields an internal surface that is up to 160 times the plane surface of the substrate for a film thickness of 1 microm. The composition of the films was investigated by X-ray photoelectron spectroscopy (XPS). Detection of the XPS signal after each deposition step of the first three dipping cycles shows a significant increase of the relative surface coverage of Ti after the TiO2 deposition step and of PSS after the PSS deposition step. For later dipping cycles, such an increase was also detectable but less prominent.     

Colloidal aspects relating to direct incorporation of TiO2 nanoparticles into mesoporous spheres by an aerosol-assisted process

Titania nanoparticles have been incorporated into spherical mesoporous silica powders by an aerosol-assisted synthesis process from both aqueous and ethanol-based precursor dispersions. Transmission electron microscopy (TEM) showed that the titania nanoparticles exist as single particles or small aggregates within the mesoporous carrier particles and analysis of the nitrogen adsorption isotherms proved that the pore blocking of the particles is small. Particle size and zeta potential measurements showed that the addition of tetraethoxysiloxane (TEOS), and also hexadecyl trimethyl ammonium bromide (C16TAB) induced flocculation of the TiO2 nanoparticles. The higher yield and narrower size distribution of the composite powder produced from ethanol-based dispersions compared to the aqueous dispersions could be related to a smaller degree of aggregation, indicated by rheological measurements.     

Formation and dielectric properties of polyelectrolyte multilayers studied by a silicon-on-insulator based thin film resistor

The formation of polyelectrolyte multilayers (PEMs) is investigated using a silicon-on-insulator based thin film resistor which is sensitive to variations of the surface potential. The buildup of the PEMs at the silicon oxide surface of the device can be observed in real time as defined potential shifts. The influence of polymer charge density is studied using the strong polyanion poly(styrene sulfonate), PSS, combined with the statistical copolymer poly(diallyl-dimethyl-ammoniumchloride-stat-N-methyl-N-vinylacetamide), P(DADMAC-stat-NMVA), at various degrees of charge (DC). The multilayer formation stops after a few deposition steps for a DC below 75%. We show that the threshold of surface charge compensation corresponds to the threshold of multilayer formation. However, no reversion of the preceding surface charge was observed. Screening of polyelectrolyte charges by mobile ions within the polymer film leads to a decrease of the potential shifts with the number of layers deposited. This decrease is much slower for PEMs consisting of P(DADMAC-stat-NMVA) and PSS as compared to PEMs consisting of poly(allylamine-hydrochloride), PAH, and PSS. From this, significant differences in the dielectric constants of the polyelectrolyte films and in the concentration of mobile ions within the films can be derived.     

Interactions in mixtures of latex particles and polymers as revealed by turbidimetry

We report a turbidimetric study of the depletion forces between latex particles induced by a dissolved polyelectrolyte. The system consists of a polystyrene latex and potassium polystyrene sulfonate (PSS). Since turbidimetry is practically insensitive to multiple scattering the analysis of the mixtures of the colloid and the dissolved polymer could be extended up to latex concentrations of 50 g/l. The amount of dissolved PSS was varied between 0.025 and 0.2 wt.%. The scattering contribution of the polymer can be neglected in very good approximation and the change in scattering intensity upon addition of PSS can directly be related to the effective attraction of the latex spheres caused by the dissolved polymer. It is demonstrated that a potential based on the volume-exclusion mechanism can describe in good approximation the osmotic compressibility resulting from the turbidimetric analysis.     

Close-packed colloidal crystalline arrays composed of silica spheres coated with titania

Titania coated monodisperse silica spheres have been synthesized and fabricated as a close-packed colloidal crystalline array. We have demonstrated that the coated colloidal sphere can be used to control the peak position of the optical stop band through variation of the coating thickness. The titania coated silica spheres were prepared by the layer-by-layer assembly coating process, which reciprocally laminates the cationic polyelectrolyte and the anionic titania nanosheets on a monodisperse silica spheres, and were sintered to change the titania nanosheets to anatase. The Bragg diffraction peak of the colloidal crystalline array shifted to the long wavelength region with an increase of thickness of the titania layer. Angle-resolved reflection spectra measurements clarified that the red shift was caused by increasing of the refractive index with increase of the thickness of the layer. The current work suggests new possibilities for the creation of advanced colloidal crystalline arrays with tunable optical properties from tailored colloidal spheres.     

A universal approach to fabricate ordered colloidal crystals arrays based on electrostatic self-assembly

We present a novel and simple method to fabricate two-dimensional (2D) poly(styrene sulfate) (PSS, negatively charged) colloidal crystals on a positively charged substrate. Our strategy contains two separate steps: one is the three-dimensional (3D) assembly of PSS particles in ethanol, and the other is electrostatic adsorption in water. First, 3D assembly in ethanol phase eliminates electrostatic attractions between colloids and the substrate. As a result, high-quality colloidal crystals are easily generated, for electrostatic attractions are unfavorable for the movement of colloidal particles during convective self-assembly. Subsequently, top layers of colloidal spheres are washed away in the water phase, whereas well-packed PSS colloids that are in contact with the substrate are tightly linked due to electrostatic interactions, resulting in the formation of ordered arrays of 2D colloidal spheres. Cycling these processes leads to the layer-by-layer assembly of 3D colloidal crystals with controllable layers. In addition, this strategy can be extended to the fabrication of patterned 2D colloidal crystals on patterned polyelectrolyte surfaces, not only on planar substrates but also on nonplanar substrates. This straightforward method may open up new possibilities for practical use of colloidal crystals of excellent quality, various patterns, and controllable fashions.     

Layer-by-layer assembly of salt-containing polyelectrolyte complexes for the fabrication of dewetting-induced porous coatings

The layer-by-layer (LbL) assembly of salt-containing nonstoichiometric polyelectrolyte complexes (PECs) with oppositely charged uncomplexed polyelectrolyte for the fabrication of dewetting-induced porous polymeric films has been systematically investigated. Salt-containing poly(allylamine hydrochloride) (PAH) and poly(acrylic acid) (PAA) complexes (noted as PAH-PAA) with a molar excess of PAH were LbL assembled with polyanion poly(sodium 4-styrenesulfonate) (PSS) to produce PSS/PAH-PAA films. The structure of the PAH-PAA complexes is dependent on the concentration of NaCl added to their aqueous dispersions, which can be used to tailor the structure of the LbL-assembled PSS/PAH-PAA films. Porous PSS/PAH-PAA films are fabricated when salt-containing PAH-PAA complexes with a large amount of added NaCl are used for LbL assembly with PSS. In-situ and ex-situ atomic force microscopy measurements disclose that the dewetting process composed of pore nucleation and pore growth steps leads to the formation of pores in the LbL-assembled PSS/PAH-PAA films. The present study provides a facile way to fabricate porous polymeric films by dewetting LbL-assembled polymeric films comprising salt-containing PECs.     

Oligosilsesquioxanes as versatile building blocks for the preparation of self-assembled thin films

A self-assembly approach to the preparation of nanocomposite siliceous thin films by using oligosilsesquioxanes as building blocks is presented. Poly(styrene-4-sulfonate), PSS, and octa(3-aminopropyl)silsesquioxane, NSi8, were layer-by-layer (LbL) assembled onto planar substrates and polystyrene (PS) particles, thus forming composite multilayers. We have clarified the binding properties of NSi8 to PSS by examining the pH influence on film buildup by microelectrophoresis (zeta-potential) and quartz crystal microgravimetry (QCM). The regular growth of PSS/NSi8 multilayers on planar supports was confirmed by surface plasmon resonance (SPR) spectroscopy and QCM. By applying the LbL coating procedure to spherical templates, we prepared compact, microporous hollow silica spheres by calcining PS spheres coated with (poly(allylamine hydrochloride) (PAH)/PSS)(2)/(NSi8/PSS)(n) (n varying from 3 to 12), at 750 degrees C, because of sintering of the octameric clusters (NSi8). Hollow spheres derived from coatings with n = 3 drastically altered in size (relative to the template core), depending on the size of the PS particles used. The novelty of this method for the nanofabrication of siliceous films stems from the use of well-defined and discrete building blocks, such as NSi8, leading to homogeneous organic-silica composite films as well as individual siliceous particles of variable size and shape.     

Electrical surface charge and potential of hematite/yttrium oxide core–shell colloidal particles

Interest in the synthesis of composite colloidal particles consisting of a core and shell with different compositions stems from the fact that such particles can be useful in processes where the properties of both core (e.g., size and shape homogeneity, ease of preparation in large amounts, magnetic characteristics, etc.) and shell (interfacial properties, porosity, chemical stability, etc.) might be of interest. However, the applicability must be based on a proper characterization of those properties. In this work, colloidal spheres of hematite (α-Fe₂O₃) were used as nuclei of mixed particles where the shell is yttrium oxide. The electrical properties of the aqueous interface are compared to those of the pure oxides by means of potentiometric titration of their surface charge and potential against pH, as a function of indifferent electrolyte concentration. It is found that the mixed particles efficiently mimic yttrium oxide, since the behavior of their surface electrical characteristics closely resembles that of the latter compound. Differences are found, however, that can be ascribed to an incomplete or porous coverage, but such divergences are of little significance when an overall comparison is carried out. Received: 30 January 2001 Accepted: 11 July 2001     

Application of liquid phase deposited titania nanoparticles on silica spheres to phosphopeptide enrichment and high performance liquid chromatography packings

A novel core-shell composite (SiO(2)-nLPD), consisting of micrometer-sized silica spheres as a core and nanometer titania particles as a surface coating, was prepared by liquid phase deposition (LPD). Here, we show the resulting core-shell composite to have better efficient and selective enrichment for mono- and multi-phosphopeptides than commercially available TiO(2) spheres without any enhancer. The material exhibited favorable characteristics for HPLC, which include narrow pore size distribution, high surface area and pore volume. We also show that the core-shell composite can efficiently separate adenosine phosphate compounds due to the Lewis acid-base interaction between titania and phosphate group when used as HPLC packings. After coating the silica sphere with titania by LPD, the silanol of silica spheres will be shielded and that the stationary phase, C(18) bonded SiO(2)-3LPD, could be used under extreme pH condition.     

Preparation and characterization of multilayered polymer nanotube dispersions

Despite considerable efforts to synthesize nanotubes using porous alumina or polycarbonate membrane templates, few studies have addressed the resulting nanotube dispersion. We prepared dispersions of multilayered polyethylenimine/maleic anhydride alternating copolymer (PEI/MAAC) nanotubes synthesized with porous alumina templates. After mechanical polishing to remove the residual polymer surface layer from templates and subsequent template dissolution, the multilayered PEI/MAAC nanotubes were easily dispersed in water at neutral pH by polyelectrolyte adsorption, producing nanotube dispersions that were stable for at least 3 months. We characterized the dispersions using phase-contrast optical microscopy, electro-optics, electrophoresis, and viscometry to help understand their colloidal properties in the dilute and semidilute regimes. The dispersions were resistant to salt-induced aggregation up to at least 1 mM NaCl and were optically anisotropic when subjected to an electric field or flow. Interestingly, the electrophoretic mobility of polystyrene sulfonate (PSS)-stabilized nanotubes increases with increasing ionic strength, because of the high surface charge and softness of the adsorbed polyelectrolyte. Furthermore, unlike many rod-like colloid systems, the polymer nanotube dispersion has low viscosity because of weak rotary Brownian motions and strong tendency to shear thinning. At the high shear rates achieved in capillary viscometry experiments, however, we observed a slight shear thickening, which can be attributed to transient hydrocluster formation.     

Binding of oppositely charged surfactants to spherical polyelectrolyte brushes: a study by cryogenic transmission electron microscopy

The formation of a complex between an anionic spherical polyelectrolyte brush (SPB) and the cationic surfactant cetyltrimethylammonium bromide (CTAB) is investigated. The SPB consists of long chains of the strong polyelectrolyte poly(styrene sulfonate) (PSS), which are bound chemically to a solid poly(styrene) core of 56 nm in radius. The SPB are dispersed in water, and the ionic strength is adjusted by addition of NaBr. The resulting complexes are investigated in dilute solution by dynamic light scattering, by electrophoretic light scattering, and by cryogenic transmission electron microscopy (cryo-TEM). The formation of the complex between the SPB and the surfactant can be monitored by a strong shrinking of the surface layer when adding CTAB to dilute suspensions (0.01 wt %) and by a decrease of the effective charge of the complexes. Complex formation starts at CTAB concentrations lower than the critical micelle concentration of this surfactant. If the ratio r of the charges on the SPB to the charge of the added surfactant is exceeding unity, the particles start to flocculate. Cryo-TEM images of the complexes at r = 0.6 measured in salt-free solution show that the surface layer composed of the PSS chains and the adsorbed CTAB molecules is partially collapsed: A part of the chains form a dense surface layer while another part of the chains or aggregates thereof are still sticking out. This can be deduced from the cryo-TEM micrographs as well as from the hydrodynamic radius, which is still of appreciable magnitude. The 1:1 complex (r = 1.0) exhibits a fully collapsed layer formed by the PSS chains and CTAB. If the complex is formed in the presence of 0.05 M NaBr, r = 0.6 leads to globular structures directly attached to the surface of the core particles. All structures seen in the cryo-TEM images can be explained by a collapse transition of the surface layer brought about by the hydrophobic attraction between the polyelectrolyte chains that became partially hydrophobic through adsorption of CTAB.     

TiO<Subscript>2</Subscript>-based nanopowders obtained from different Ti-alkoxides

Pure TiO₂ and S-doped TiO₂ sol–gel nanopowders were prepared by controlled hydrolysis-condensation of titanium alkoxides. The influence of different Ti-alkoxides (tetraethyl-, tetraisopropyl- and tetrabutyl-orthotitanate) used in obtaining TiO₂ porous materials in similar conditions (water/alkoxide ratio, solvent/alkoxide ratio, pH and temperature of reaction) has been investigated. The relationship between the synthesis conditions and the properties of titania nanosized powders, such as thermal stability, phase composition, crystallinity, morphology and size of particles, BET surface area and the influence of dopant was investigated. The nature of the alkyl group strongly influences the main characteristics of the obtained oxide powders, fact which is pointed out by thermal analysis, X-ray diffraction, TEM and BET surface area measurements.     

Soft X-ray microscopy to characterize polyelectrolyte assemblies

Transmission microscopy with soft X-rays (TXM) is applied to image in-situ polyelectrolyte assemblies in aqueous environment. The method is element specific and at this stage exhibits a lateral resolution of 20 nm. With the specific examples of hollow capsules and full spheres made of PAH/PSS polyelectrolyte multilayers, it is shown quantitatively that heat treatment irreversibly reduces the water content in the membrane. These experiments complement those reported recently on the polyion system PDADMAC/PSS, which shows a different glass-transition behavior. Finally, the potential and present limitations of TXM are discussed.     

Organic pigment particles coated with titania via sol-gel process

This paper presented a novel method for the organic pigment coated with titania to improve the weatherability and dispersion ability in waterborne system. The organic pigment was first orderly adsorbed by two kinds of electrolyte: poly(sodium 4-styrenesulfonate) (PSS) and poly(diallyldimethylammonium chloride) (PDADMAC), then coated by titania via sol-gel process from titanium n-butoxide (TBOT). The effects of the numbers of polyelectrolyte layer, water content, and TBOT content on the morphology, particle size, surface element composition, porosity and pore size, thermal stability, and UV shielding property of the organic pigment were systematically investigated. It was found that only two layers of electrolyte adsorption and one-step coating of titania could obviously enhance the UV shielding property even thermal stability of the organic pigment. The thickness of the titania layer could be easily tailored by TBOT content.     

Assembly of Alternated Multivalent Ion/Polyelectrolyte Layers on Colloidal Particles. Stability of the Multilayers and Encapsulation of Macromolecules into Polyelectrolyte Capsules

Alternating adsorption of multivalent ions and oppositely charged polyelectrolytes on colloid particles has been investigated. Multilayer films composed of Tb³⁺/polysterene sulfonate (PSS) and 4-pyrene sulfate/polyallylamine (PAH) were successfully assembled on polysterene sulfonate (PS) and melamine formaldehyde (MF) latex particles. The amount of assembled material was estimated by fluorescence and the linear growth of the film versus the number of layers was demonstrated. These multilayers are not stable and can be decomposed by salt and temperature. Dissolution of MF particles leads to formation of hollow capsules consisting of multivalent ion/polyelectrolyte multilayers. Comparative analysis of the capsules was done by confocal and scanning force microscopy. Complex hollow spheres consisting of Tb³⁺/PSS or 4-PS/PAH as an inner shell and stable PSS/PAH as an outer shell were produced. Due to selective permeability of the outer shell after degradation of the inner shell the multivalent ions are released out of the capsule while the polyelectrolytes fill the capsule interior. This is indicative of swelling of the capsule by osmotic pressure. The filled capsules were studied by confocal and scanning electron microscopy. Possibilities of encapsulating macromolecules in defined amounts per capsule are discussed.     

Low‐Temperature Facile Template Synthesis of Crystalline Inorganic Composite Hollow Spheres

This report presents a facile approach for the low‐temperature synthesis of crystalline inorganic‐oxide composite hollow spheres by employing the bulk controlled synthesis of inorganic‐oxide nanocrystals with polymer spheres as templates. The sulfonated polystyrene gel layer can adsorb the target precursor and induce inorganic nanocrystals to grow on the template in situ. The crystalline phase and morphology of the composite shell is tunable. By simply adjusting the acidity of the titania sol, crystalline titania composite hollow spheres with tunable crystalline phases of anatase, rutile, or a mixture of both were achieved. The approach is general and has been extended to synthesize the representative perovskite oxide (barium and strontium titanate) composite hollow spheres. The traditional thermal treatment for crystallite transformation is not required, thus intact shells can be guaranteed. The combination of oxide properties such as high refractive index, high dielectric constant, and catalytic ability with the cavity of the hollow spheres is promising for applications such as opacifiers, photonic crystals, high‐κ‐gate dielectrics, and photocatalysis.