钐对K3PW12O40配合物气相扩渗的物相及导电性研究

采用气相扩渗的方法,对K3PW12O40.7H2O配合物进行稀土Sm的化学热扩渗.利用IR,XRD,TG-DTA和XPS等手段对扩渗后配合物的结构进行了表征和研究,发现在720℃下扩渗后的主要产物是β-W2N.XPS能谱分析证实了稀土的存在且与化合物有一定的键合作用.采用四极法对扩渗前后的试样进行了导电性能测试,扩渗后试样的导电性提高了3.1×104倍.分析了电阻、电导率与温度变化的关系曲线,发现此材料的导电性在672℃后电阻趋于0.     

K8[ZnMg(H2O)W11O39]·15H2O的合成、表征及化学热扩渗

利用直接法合成未见文献报道的K8[ZnMg(H2O)W11O39]·15H2O,通过ICP,IR和XRD等方法对其结构进行表征,结果表明所合成的配合物具有Keggin结构.采用化学热扩渗法对合成配合物进行稀土扩渗实验,经XPS测试表明,有微量的钆渗进配合物的体相,并与组成元素存在键合作用,导电性测试结果表明,扩渗后试样的导电率提高105倍,是一种优良的固体电解质,有望成为具有实用价值的功能材料.     

镨对锌单取代杂多化合物气相扩渗的电性能及XPS研究

报道了采用气相法对K7ZnBW11O39配合物进行Pr的化学热扩渗, 研究了材料的电性能, 并结合XPS等表征手段对其导电机理加以了初步的分析. 通过配合物的TG-DTA分析确定了扩渗温度,扩渗后材料的ICP分析测试表明, 微量Pr可渗入到试样中. 经XRD分析发现, 扩渗后,化合物的晶型发生了改变, 得到了新的化合物. 利用四电极法和交流阻抗法对扩渗前后样品的导电性能进行了测试, 结果表明材料的导电性能发生了十分显著的变化, 扩渗后试样的电导率为2.98×10-2 S*cm-1, 比扩渗前的电导率3.54×10-6 S*cm-1提高了约104倍. XPS能谱及交流阻抗谱分析显示可能存在氧空穴导电.     

钇钼钨硅杂多配合物的合成稀土多元渗及导电性

用降解法合成了未见报道的标题配合物.通过化学分析、ICP和TG曲线确定了其化学式为K10H3[Y(SiW9Mo2O39)2];利用IR、XRD、183W-NMR、循环伏安等手段对其结构进行了表征.结果表明,杂多阴离子为α-型Keggin结构.采用稀土多元渗的方法对配合物进行了气相热扩渗,ICP和XPS测试表明,微量的稀土元素La,Sm和Dy可以渗入到配合物的体相,并与组分元素发生键合作用;导电性的测试结果表明,室温扩渗后,试样的电导率提高了约104倍,有望成为具有实际应用的固体电解质.     

钐和钆对K10H3[Dy(SiW4Mo7O39)2]配合物的化学热扩渗及其导电性的研究

报道了Sm,Gd通过固 气界面反应对K10H3[Dy(SiW4Mo7O39)2]配合物的稀土多元渗。经ICP,IR测试表明:微量Sm,Gd可渗入到杂多配合物K10H3[Dy(SiW4Mo7O39)2]体相,XPS能谱分析证实了稀土元素的存在并与化合物有键合作用。采用四电极法对扩渗前后试样进行了导电性能的测定,扩渗后试样的导电率提高了0 9356×104倍。     

钇磷钨三元杂多配合物的合成及其稀土多元渗与导电性的研究

合成了未见报道的标题配合物。通过化学分析、ICP和TG曲线确定了其化学式为K_8H_3[Y(PW_(11)O_(39))_2]·25H_2O;利用IR、UV、XRD、~(183)W-NMR、循环伏安等手段对其结构进行了表征,结果表明杂多阴离子为β_2型Keggin结构。采用稀土多元渗的方法对配合物进行了气相热扩渗,经ICP和XPS测试表明:微量的稀土元素La和Ce可以渗入到配合物的体相,并与组份元素存在键合作用。扩渗后化合物的化学式为K_8H_6YLa_(0.11)Ce_(0.18)P_2W_4~ⅤW_(18)~ⅥO_(78)·15H_2O,其晶体属单斜晶系,晶胞参数:a=6.3775nm,b=3.6771nm,c=3.7727nm,β=90.192°,V=88.47326nm~3;导电性的测试结果表明:室温时,扩渗后试样的电导率提高了约10~3倍,且热稳定范围变宽,523K时的电导率为1.33×10~(-2)S·cm~(-1),有望成为实用化的导电材料;~1H MAS NMR测试结果表明其存在三种质子,其导电机理可能是质子导电。     

稀土对K10H3[Y(SiW11O39)2]的多元渗及导电性

用降解法合成了具有Keggin结构的钇钨硅多金属氧酸盐, 以化学分析、 TG曲线和ICP确定通式为K10H3[Y(SiW11O39)2]. 利用IR、 183W-NMR等手段对配合物的结构进行了表征和研究, 结果表明配合物具有Keggin结构. TG-DTA分析表明配合物在400～450 ℃范围内仍不分解. 对配合物进行了化学热扩渗稀土的实验. 经ICP和XPS测试表明微量稀土元素可以渗入到配合物的表、界面乃至体相, 同时用四探针法和交流阻抗谱测试了不同温度下的电导率, 扩渗后样品的电导率σ=1.935×10-2 S*cm-1, 比扩渗前提高约105倍, 且随温度的升高, 导电性增强, 有望成为具有实际应用的多金属氧酸盐型固体电解质.     

La, Ce对Ge-W-Co多金属氧酸盐的气相扩渗及导电性研究

报道了采用多元渗的方法对K6HCoGeW11O40氧酸盐进行了稀土的气相扩渗. 根据氧酸盐的TG-DTA测试结果确定了稀土扩渗的温度, 扩渗后的化合物经ICP分析测试表明, 微量的La, Ce可渗入到试样中; 对其XPS的测试结果证实La, Ce与氧酸盐中其他组分有键合作用; 对比扩渗前后化合物的XRD谱图发现, 扩渗前后化合物的衍射峰有明显的不同, 预期得到了新的化合物. 利用四电极法和交流阻抗法对扩渗前后样品的导电性能进行了测试, 结果表明扩渗后试样的电导率比扩渗前的电导率提高了2.95×103倍. 对扩渗后样品的变温交流阻抗谱分析显示, 250 ℃时其导电类型发生了转变.     

碱土金属钨铬杂多配合物的合成、表征及热稳定性研究

用直接法合成了以Cr为中心原子的碱土金属和W的三元杂多配合物,经ICP和TG曲线确定其化学式为K7[CrA(H2O)W11O39].xH2O(A=Mg2 ,Ca2 ,Sr2 和Ba2 ),采用IR,UV,XRD,XPS和183W NMR等手段对配合物结构进行了表征,确认所合成的配合物为-αKeggin结构.借助TG-DTA详细讨论了配合物的热稳定性,得出合成配合物的热稳定温度为450℃左右.     

2-乙烯吡啶-丙烯酸甲酯共聚物与四羰基二氯二铑反应所得配合物的结构与催化甲醇羰基化性能的研究

聚(2-乙烯吡啶—丙烯酸甲酯)共聚物与四羰基二氯二铑形成的配合物是一种催化甲醇羰基化的新型催化剂.本文用X-射线衍射(XRD),光电子能谱(XPS)和红外光谱(IR)对其键合状态进行了表征,并探索了其分子骨架结构与催化甲醇羰基化活性之间的关系.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.