Electrochemical detection of nanoscale phase separation in binary self-assembled monolayers

Developing methods to probe the nature and structure of nanoscale environments continues to be a challenge in nanoscience. We report a cyclic voltammetry investigation of the internal, hydrogen-bond-driven phase separation of amide-containing thiols and alkanethiols. Amide-containing thiols with a terminal ferrocene carboxylate functional group were investigated in two binary monolayers, one homogeneously mixed and the other phase separated. The electrochemical response of the ferrocene probe was used to monitor adsorbate coverage, environment, and phase separation within each of these monolayers. The results demonstrate that the behavior of ferrocene-containing monolayers can be used to probe nanoscale organization.     

Hydrogen bonding-directed quantitative self-assembly of cyclotriveratrylene capsules and their encapsulation of C60 and C70

Under the direction of intramolecular three-center hydrogen bonding, two cyclotriveratrylene (CTV)-based capsules are assembled quantitatively from C(3)-symmetric CTV precursors by forming three imine bonds from arylamide-derived foldamer segments. (1)H and (13)C NMR and UV/vis experiments reveal that the capsules strongly encapsulate C(60) and C(70) in discrete solvents.     

Carbon nanotube capsules self-assembled by w/o emulsion technique

Carbon nanotube capsules (CNCs) with the diameter of 5-10 microm were fabricated from acid-modified multiwalled carbon nanotubes (CNTs) using water-in-oil (W/O) emulsion technique. The effects of the content of CNTs in water, the extent of acid treatment, and the length of CNTs used on the formation and morphology of CNCs were investigated. It was found that the amount of CNTs in water and the length of CNTs are the crucial factors for the formation of carbon nanotube capsules.     

Stable jets of viscoelastic fluids and self-assembled cylindrical capsules by hydrodynamic focusing

We demonstrate formation of long-lived cylindrical jets of a viscoelastic fluid using hydrodynamic focusing. A solution of polyacrylamide in water is driven coaxially with immiscible oil and subjected to strong extensional flow. At high flow rates, the aqueous phase forms jets that are 4-90 microm in diameter and several centimeters long. The liquid surfaces of these jets are then used as templates for assembly of microspheres into novel rigid and hollow cylinders.     

Size‐ and Orientation‐Selective Encapsulation of C70 by Cycloparaphenylenes

The size‐ and orientation‐selective formation of the shortest‐possible C₇₀ peapod in solution and in the solid state by using the shortest structural unit of an “armchair” carbon nanotube (CNT), cycloparaphenylene (CPP), has been studied. [10]CPP and [11]CPP exothermically formed 1:1 complexes with C₇₀, thereby giving the resulting peapods. A van′t Hoff plot analysis revealed that the formation of these complexes in 1,2‐dichlorobenzene was mainly driven by entropy, whereas the theoretical calculations suggested that the formation of the complex in the gas phase was predominantly driven by enthalpy. C₇₀ was found to exist in two distinct orientations inside the CPP cavity, namely “lying” and “standing”, depending on the specific size of the CPP. The theoretical calculations and the X‐ray crystallographic analysis revealed that the interactions between [10]CPP and the short axis of C₇₀ in its lying orientation were isotropic and similar to those observed between [10]CPP and C₆₀. However, the interactions between [11]CPP and C₇₀ in its standing orientation were anisotropic, thereby involving the radial deformation of [11]CPP into an ellipsoidal shape. This “induced fit” maximized the van der Waals interactions with the long axis of C₇₀. Theoretical calculations revealed that the deformation occurred readily with low energy loss, thus suggesting that CPPs are highly radially elastic molecules. These results also indicate that the same type of radial deformation should occur in CNT peapods that encapsulate anisotropic fullerenes.     

A BPTTF-based self-assembled electron-donating triangle capable of C60 binding

A kinetically stable self-assembled redox-active triangle is isolated. The resulting electron-donating cavity, which incorporates three BPTTF units, exhibits a remarkable binding ability for electron-deficient C(60), supported by a favorable combination of structural and electronic features.     

Selective binding of aromatic amines by self-assembled monolayers of a calix[6]crown-4 derivative

A p-tert-butylcalix[6]crown-4 derivative immobilized on gold surfaces via self-assembly, endowed with a rigid cavity, can serve as a remarkably efficient sensor for aniline compared to alkylamines. The stability of the inclusion complex is attributed to the size fit and to the multipoint recognition motifs between the host monolayer and the guest aniline. [structure: see text]     

Smart hybrid magnetic self-assembled micelles and hollow capsules

Novel magnetic nano-composites are obtained by the self-assembly in water of polypeptide-based diblock copolymers polybutadiene-b-poly(glutamic acid) combined with hydrophobically modified γ-Fe₂O₃ nanoparticles. These hybrid supramolecular objects are either filled micelles (3-d) or hollow vesicles with a magnetic membrane (2-d), deformation of which under an applied magnetic field has been evidenced. These nanoparticles are also able to respond to stimuli such as pH and ionic strength due to the presence of the polypeptide block, thus forming what we called multi-responsive nanocapsules. These superparamagnetic hybrid self-assemblies offer attractive potentialities in biomedicine and biotechnology due to their dimensions (0.1–0.5 μm) small enough to stay for some time in the blood circulation, and due to the properties brought about by the iron oxide nanoparticles: possible manipulation by an external magnetic field gradient, local heating by a radio-frequency field for cancer radio-therapy, labeling of organs to enhance the contrast in Magnetic Resonance Imaging.     

Selective Encapsulation and Chiral Induction of C60 and C70 Fullerenes by Axially Chiral Porous Aromatic Cages

Chiral induction has been an important topic in chemistry, not only for its relevance in understanding the mysterious phenomenon of spontaneous symmetry breaking in nature but also due to its critical implications in medicine and the chiral industry. The induced chirality of fullerenes by host–guest interactions has been rarely reported, mainly attributed to their chiral resistance from high symmetry and challenges in their accessibility. Herein, we report two new pairs of chiral porous aromatic cages (PAC), R- PAC-2 , S- PAC-2 (with Br substituents) and R- PAC-3 , S- PAC-3 (with CH₃ substituents) enantiomers. PAC-2 , rather than PAC-3 , achieves fullerene encapsulation and selective binding of C₇₀ over C₆₀ in fullerene carbon soot. More significantly, the occurrence of chiral induction between R- PAC-2 , S- PAC-2 and fullerenes is confirmed by single-crystal X-ray diffraction and the intense CD signal within the absorption region of fullerenes. DFT calculations reveal the contribution of electrostatic effects originating from face-to-face arene-fullerene interactions dominate C₇₀ selectivity and elucidate the substituent effect on fullerene encapsulation. The disturbance from the differential interactions between fullerene and surrounding chiral cages on the intrinsic highly symmetric electronic structure of fullerene could be the primary reason accounting for the induced chirality of fullerene.     

Selective guest recognition by a self-assembled paramagnetic cage complex

A cubic cage complex assembled from twelve bis-bidentate ligands and eight Co(II) ions provides a cavity that selectively recognises and binds coumarin in MeCN solution. The cage portals are large enough to allow guest exchange, but small enough to provide a kinetic trap; the cage paramagnetism facilitates detailed NMR analysis.     

Template-assisted patterning of nanoscale self-assembled monolayer arrays on surfaces

We report a general, simple, and inexpensive approach to pattern features of self-assembled monolayers (SAMs) on silicon and gold surfaces using porous anodic alumina films as templates. The SAM patterns, with feature sizes down to 30 nm and densities higher than 10(10)/cm(2), can be prepared over large areas (>5 cm(2)). The feature dimensions can be tuned by controlling the alumina template structure. These SAM patterns have been successfully used as resists for fabricating gold and silicon nanoparticle arrays on substrates by wet-chemical etching. In addition, we show that arrays of gold features can be patterned with 10-nm gaps between the dots.     

Selective separation of pyrite and chalcopyrite by biomodulation

Selective separation of pyrite from other associated ferrous sulphides at acidic and neutral pH has been a challenging problem. This paper discusses the utility of Acidithiobacillus ferrooxidans for the selective flotation of chalcopyrite from pyrite. Consequent to interaction with bacterial cells, pyrite remained depressed even in the presence of potassium isopropyl xanthate collector while chalcopyrite exhibited significant flotability. However, when the minerals were conditioned together, the selectivity achieved was poor due to the activation of pyrite surface by the copper ions in solution. The selectivity was improved when the sequence of conditioning with bacterial cells and collector was reversed, since the bacterial cells were able to depress collector interacted pyrite effectively, while having negligible effect on chalcopyrite. The observed behaviour is analysed and discussed in detail. The separation obtained was significant both at acidic and alkaline pH. This selectivity achieved was retained when the minerals were interacted with both bacterial cells and collector simultaneously.     

Selective formation of heterodimeric resorcinarene capsules

C_2V-symmetrical resorcinarene tetraesters 1 form in CDCl₃ dimeric capsules encapsulating one Me₄N⁺ cation. The homodimeric capsules of the tetra(3,4,5-trimethoxybenzoate) 1d and tetrabenzoate 1b or tetrafuroylate 1c disproportionate in solution to give quantitatively the heterodimers. The higher stability of the heterodimer is, most probably, caused by π-π attractions between the π-basic trimethoxyphenyl rings of 1d and relatively more π-accepting phenyl or furyl fragments of 1b or 1c.     

Activity study of self-assembled proteins on nanoscale diblock copolymer templates

Novel methods for affixing functional proteins on surfaces with high areal density have the potential to promote basic biological research as well as various bioarray applications. The use of polymeric templates under carefully balanced thermodynamic conditions enables spontaneous, self-assembled protein immobilization on surfaces with spatial control on the nanometer scale. To assess the full potential of such nanometer-scale protein platforms in biosensing applications, we report for the first time the biological activity of proteins on diblock copolymer platforms. We utilized horseradish peroxidase, mushroom tyrosinase, enhanced green fluorescent protein, bovine immunoglobulin G, fluorescein isothiocyanate conjugated anti-bovine IgG, and protein G as model systems in our protein activity studies. When specific catalytic functions of HRP and MT, immobilized on selective domains of microphase-separated PS-b-PMMA, are evaluated over a long period of time, these enzymes retain their catalytic activity and stability for well over 3 months. By performing confocal fluorescence measurements of self-fluorescing proteins and interacting protein/protein systems, we have also demonstrated that the binding behavior of these proteins is unaffected by surface immobilization onto PS-b-PMMA diblock copolymer microdomains. Our polymer platforms provide highly periodic, high-density, functional, stable surface-bound proteins with spatial control on the nanometer scale. Therefore, our diblock copolymer-guided protein assembly method can be extremely beneficial for high-throughput proteomic applications.     

Fast separation and quantification of C60 and C70 fullerenes using thermostated micro thin-layer chromatography.

Thermostated micro planar chromatography was applied for systematic separation studies of C60 and C70 fullerenes using n-alkanes as mobile phases on TLC and HPTLC plates coated with polyamide, silica gel, aluminum oxide as well as two types of octadecylsilica (C18) sorbents. Retention data were collected at constant temperature at 20 degrees C (+/-0.05 degrees C) using an unsaturated chamber mode with an eluent, such as n-pentane, n-hexane and n-heptane. The separation results under both saturated and unsaturated chamber modes for selected mobile/stationary phases were also examined, and several parameters, including separation factor (alpha) and resolution (R(S)), were compared with data obtained with high-performance liquid chromatography conditions. Interestingly, C60/C70 fullerenes separation performed on HPTLC plates with a developing distance of 45 mm was better for those observed on a 25 cm length analytical HPLC column under similar conditions to that on carbon coverage of the stationary phase, n-hexane as the mobile phase and separation temperature (R(S) = 1.84 and 1.68 for HPTLC, and HPLC, respectively). Moreover the advantage of the planar chromatographic separation of fullerenes studied is a short elution time of less than 6 min. Furthermore, the reported separation protocol shows a capability for the evaluation of fullerenes quantity in commercial samples.     

Selective binding of carbamate pesticides by self-assembled monolayers of calix[4]arene lipoic acid: wettability and impedance dual-signal response

A calix[4]arene lipoic acid (C4LA) was synthesized by click chemistry in 62% yield. It was immobilized on Au surfaces via self-assembly to offer C4LA Self-Assembled Monolayers (SAMs). The SAMs show wettability and electrochemical impedance dual-signal response for methomyl with highly sensitivity and selectivity.     

Relative binding affinities of molecular capsules investigated by ESI-mass spectrometry

ESI-MS(/MS) has been used as a method which allows the fast, unambiguous and sensitive simultaneous detection and relative stability approximation of supramolecular assemblies in mixtures. In spite of the obvious fundamental differences between solution and gas phase, ESI-MS in the case of self-assembled molecular capsules has been shown to produce very similar results to single binding experiments monitored by NMR titrations as well as conformational searches performed by Monte-Carlo simulations. MS/MS experiments reveal the same relative order of gas phase stabilities as previously found in solution. Moreover, proton transfer reactions which lead to new molecular capsules, are not detectable in the time-averaged NMR spectrum. However, the newly produced species are found in the complex mixtures by ESI-MS and can be conveniently characterized by subsequent MS/MS experiments: in a collision-induced dissociation the single half-spheres are easily discovered and structurally assigned. Thus, ESI-MS has worked as a valuable tool for the rapid screening of complex supramolecular mixtures and in combination with MS/MS experiments elucidated both the path of unexpected side reactions as well as the thermodynamic gas-phase stabilities of all components in the mixture.