An approach toward the syntheses of triazolo benzoxazines,triazolo quinoxalines,triazolo benzodiazepines,triazolo benzoxazepines,and triazolo benzothiazines via a simple and convenient protocol using basic alumina as solid support

A microwave assisted green protocol for the syntheses of triazole fused benzoxazines, benzoxazepines, quinoxalines, and benzothiazines was investigated using basic alumina as solid support. The one-pot reaction was carried out using Cu(phen)(PPh₃)Br as a catalyst. The protocol did not require the use of any additional ligands, base or the use of expensive and toxic palladiums.     

An easy access to diversely fused dioxa-2-aza-tricyclo[n.3.1.0]tetra/pentadecanes under solvent-free condition

Efficient syntheses of phenyl/N-heterocycle fused 6,13-dioxa-2-aza-tricyclo[8.3.1.0^2,8]tetradecanes have been accomplished from 8-hydroxy quinoline derivatives under solvent-free condition, using basic alumina as the solid support. The methodology was successfully extended for the synthesis of corresponding pentadecane derivatives under similar reaction conditions. In terms of its general applicability, product yield, reaction time and effortless separation techniques, the methodology is more valuable compared to the solution phase protocols.     

Carbonylative Sonogashira annulation sequence: One-pot synthesis of 4-quinolone and 4H-chromen-4-one derivatives

Carbonylative Sonogashira annulation sequence for one pot synthesis of 4-quinolone and 4H-chromen-4-one has been developed in presence of Pd-NHC catalyst. Substituted 2-iodoaniline and 2-iodophenol independently underwent in the carbonylative Sonogashira annulation reaction with a variety of acetylenes to result in 4-quinolone and flavone derivatives respectively in good to excellent yield. Moreover, this protocol does not require toxic CO gas, high catalyst loading and any expensive salt/additive. Herein we, for the first time, are using Mo(CO)₆, as solid CO source for the one pot synthesis of flavone derivatives via carbonylative Sonogashira annulation reaction.     

Oligomerization of N-aminodipeptides: to the synthesis of heterogeneous backbone with 1:1 α:α-N-amino aminoacid residue patterns

A large number of N-aminodipeptides compounds have been obtained via a Mitsunobu protocol performed in solution or by solid-phase synthesis. The oligomerization of some of them has been studied in solution or on solid support leading to the formation of 1:1[α:α-N-amino]mers.     

Enantioselective synthesis of (2S,3′R,7′Z)-N-(3′-hydroxy-7′-tetradecenoyl)-homoserine lactone

A concise enantioselective total synthesis of (2S,3′R,7′Z)-N-(3′-hydroxy-7′-tetradecenoyl)-homoserine lactone is described. Key feature of this protocol is a catalytic asymmetric hydrogenation and a prophenol-zinc-catalyzed diazo addition to imine reaction as genesis of chirality. Moreover, flexibility is built in the synthesis to generate enantioenriched analogs using catalytic amount of enantioenriched C₂-symmetric ligands.     

Preparation of optically pure cross-conjugated cyclopentadienones

The synthesis of optically pure cross-conjugated cyclopentadienones is readily achieved in two steps via a one-pot alkylcuprate addition/aldol condensation/dehydration sequence using racemic or enantioenriched endo-3a,4,7,7a-tetrahydro-1H-4,7-methano-inden-1-ones followed by microwave-mediated Lewis acid-catalysed retro Diels-Alder reaction. An alternative route involving a modified Baylis-Hillman protocol followed by conjugate addition with alkylcuprates and a retro Diels-Alder reaction was also investigated.     

Pd/C mediated synthesis of 2-substituted benzo[b]furans/nitrobenzo[b]furans in water

An efficient synthesis of 2-alkyl/aryl substituted benzo[b]furans/nitrobenzo[b]furans in water has been accomplished via Pd/C catalyzed reaction of o-iodophenols with terminal alkynes in the presence of PPh₃, CuI and prolinol. This method can tolerate a variety of functional groups present in the alkynes as well as base labile nitro group in the o-iodophenols. The protocol does not require the use of a phase transfer catalyst or water-soluble phosphine ligands and is free from the use of any organic co-solvent.     

Efficient iodine catalyzed chemoselective synthesis of aminals—an access to N,N-acetals by the addition of lactams to N-acyl imines

A highly efficient protocol has been developed for the synthesis of aminals from γ-butyrolactam and benzaldehyde using iodine as Lewis acid catalyst. The attack of γ-butyrolactam nucleophile to intermediate N-acyliminium ion was more favorable, when aryl aldehyde bears the electron donating group (EDG). Iodine plays a key role in these reaction transformations. This current mild protocol is environmentally benign and cost-effective method for the synthesis of industrially and pharmaceutically useful scaffolds.     

PEG-400 as green reaction medium for Lewis acid-promoted cycloaddition reactions with isoeugenol and anethole

A simple and efficient one-pot method for the synthesis of new 2,4-diaryl-1,2,3,4-tetrahydroquinolines using a three-component imino Diels-Alder cycloaddition between trans-isoeugenol or trans-anethole, anilines, and benzaldehyde in the presence of BF₃·OEt₂ in PEG-400, a green and reusable solvent, has been developed. Also, BF₃·OEt₂-catalyzed formal [3+2] cycloaddition reaction of trans-isoeugenol or trans-anethole with 1,4-benzoquinone in PEG-400 to give dihydrobenzo[b]furan derivatives has been described.     

[3+2] Cycloaddition of metal-containing azomethine ylides for highly efficient synthesis of mitosene skeleton

Efficient synthesis of tricyclic indole derivatives bearing a substituent at the 3-position of the indole nucleus was achieved by the [3+2] cycloaddition reaction of transition metal-containing azomethine ylides derived from N-(o-alkynylphenyl)imines with vinyl ethers. Third-row transition metal complexes, especially PtCl₂, turned out to be highly efficient for the reaction of internal alkynes and imidate substrates with wide generality. Moreover, as strong support for the reaction mechanism, the intermediate Pt-carbene complex was found to undergo intramolecular C-H bond insertion reaction to give tetracyclic indoline derivatives when benzyl vinyl ether was employed as a dipolarophile. This protocol provided a facile synthesis of highly functionalized tricyclic indole derivatives found as the basic skeleton of the mitosene family, such as mitomycin C.     

Microwave-assisted multicomponent synthesis of julolidines using silica-supported calix[4]arene as heterogeneous catalyst

The application of immobilizing calixarene onto the surface of silica using a sol-gel method, as an efficient heterogeneous catalyst (CX4SO₃HSi(n)) for multicomponent Povarov reaction has been described. Catalytic activity of the CX4SO₃HSi(n) for the synthesis of julolidines under greener and environmentally benign conditions in simple and efficient method was explored. Notably, only 0.5 mol% of the catalyst is sufficient to catalyze the Povarov solvent-free reaction under microwave-assistance. Besides, this protocol allows the construction of four new C–C bonds and two C–N bonds in a single step. To the best of our knowledge, this consists the first silica support calix[4]arene as a heterogeneous catalyst for multicomponent synthesis of julolidines.     

α,α-Dialkylglycines obtained by solid phase Ugi reaction performed over isocyanide functionalized resins

The multicomponent Ugi reaction is a straightforward method that can be used for the synthesis of highly hindered C-tetrasubstituted amino acids by reacting an amine, a ketone or aldehyde, a carboxylic acid and an isocyanide. In the present work, the synthesis of several α,α-dialkylglycines (α,α-diethylglycine, Deg; α,α-dipropylglycine, Dpg; 1-amino-1-cyclohexanecarboxylic acid, Ac₆c) was achieved by solid phase Ugi reaction using resins functionalized with the isocyanide group. Since no resins with these features were available commercially, the functionalization of an aminomethylated resin started by the use of glycine (Gly), β-alanine (β-Ala) and γ-aminobutyric acid (GABA) as spacers. After spacer N-formylation, followed by dehydration, isocyanide functionalised resins were obtained. The resins were then used in solid phase Ugi reaction, using phenylacetic acid as the acid component, 4-methoxybenzylamine as the amine component and different ketones, to afford the desired N-acylated α,α-dialkylglycines in good overall yields (60–80%), after acidolytic cleavage from the resin, thus proving the feasibility of this approach.     

An efficient synthesis of 5-substituted 1H-tetrazoles via B(C6F5)3 catalyzed [3+2] cycloaddition of nitriles and sodium azide

A simple and efficient protocol is developed for the synthesis of 5-substituted 1H-tetrazole derivatives from various nitriles and sodium azide (NaN₃) via [3+2] cycloaddition reaction using B(C₆F₅)₃ as a catalyst. The present synthetic method displayed significant advantages such as low catalyst loading, mild reaction conditions, low toxicity, easy work-up, high yields, and compatibility with other functional groups.     

Silica sulfuric acid: an efficient reusable heterogeneous solid support for the synthesis of 3H,3′H-spiro[benzofuran-2,1′isobenzofuran]-3,3′-diones under solvent-free condition

A highly efficient protocol for the library synthesis of biologically important 3H,3′H-spiro[benzofuran-2,1′isobenzofuran]-3,3′-diones has been developed by employing silica sulfuric acid (SSA) as solid acid support under solvent-free condition. The dual characteristics of SSA, as an activating agent as well as oxidizing agent, have been well exposed in these syntheses. The intrinsic advantages of the methodology are the use of solvent-free reaction condition without using any toxic reagents or metal catalyst, operational simplicity, recyclability of the solid support, good availability of the starting materials, and excellent yields which make the method attractive, economic, and ‘benign by design’.     

Synthesis of 1,2,4-oxadiazole-linked orthogonally urethane-protected dipeptide mimetics

The synthesis of a new class of 1,2,4-oxadiazole-linked orthogonally urethane-protected dipeptide mimetics is described. The protocol employs a reaction between an N-protected amino acyl fluoride and an amino acid-derived amidoxime. All the three commonly employed urethanes have been used in this protocol for N-protection. The course of the reaction was found to be high yielding and all new compounds were well characterized by NMR and mass spectroscopy. The O-acyl amidoxime intermediate has also been isolated as a stable solid.     

Clean and atom-economic synthesis of octahydroacridines: application to essential oil of citronella

A green and efficient method for the synthesis of octahydroacridine (OHA) has been developed by a simple one-pot hetero-Diels-Alder reaction starting from (+)-citronellal and N-arylamines in the presence of a solid supported catalyst (SiO₂/ZnCl₂), under MW irradiation and without any solvent. The method was used in the direct preparation of OHA from citronella oil in good yield.     

Candida antarctica lipase B-catalyzed synthesis of acetamides using [BMIm(PF6)] as a reaction medium

An efficient protocol has been developed for synthesis of acetamides using Candida antarctica lipase B (CaL B) in [BMIm(PF₆)] as a greener reaction medium. The reaction is applicable to a wide variety of aliphatic esters/acetic acid and amines providing excellent yields of corresponding acetamide. The catalyst exhibits remarkable activity and is reusable for up to four consecutive cycles.     

Synthesis and characterization of La2Mo2O9 obtained from freeze-dried precursors

La₂Mo₂O₉ ceramics have been prepared from freeze-dried precursors and their properties compared to those of lantanum molybdate obtained by conventional solid state (SS) reaction. All materials have been characterized by X-ray diffraction, scanning electron microscopy and thermal analysis (TGA/DTA/DSC and dilatometry) to characterize the phase formation and phase transition. When the freeze-dried method was applied, the synthesis temperature required to obtain dense samples was much lower than that for powders obtained by SS reaction. The morphology and structure of the oxide particle are significantly dependent on the synthesis method. The grain size is smaller, whereas the density of sintered pellets is higher for the freeze-dried precursor powder when compared with the SS reaction method. Impedance spectroscopy was used to measure the electrical conductivity of La₂Mo₂O₉ from 548 to 1123 K, in air, and to characterize the blocking effects of grain boundaries.     

One-pot three-component synthesis of functionalized spirolactones by means of reaction between aromatic ketones, dimethyl acetylenedicarboxylate, and N-heterocycles

A simple and convenient one-pot multi-component reaction has been described for the synthesis of functionalized spirolactones. This strategy demonstrated three-component reaction between aromatic ketones (11H-indeno[1,2-b]quinoxalin-11-one) and dimethyl acetylenedicarboxylate (DMAD) in the presence of N-heterocycles, such as pyridine, quinoline, and isoquinoline in CH₂Cl₂ at ambient temperature without use of any catalyst or activator.     

Efficient One‐Pot Solvent‐Free Synthesis of 1H‐Pyrazolo[1,2‐b]phthalazine‐5,10‐diones Catalyzed by Sulfonic Acid Functionalized Nanoporous Silica (SBA‐Pr‐SO3H)

A green protocol has been developed for the synthesis of 1H‐pyrazolo[1,2‐b]phthalazine‐5,10‐diones by one‐pot cyclocondensation reaction of phthalhydrazide, aromatic aldehydes, and malononitrile or ethyl cyanoacetate using sulfonic acid functionalized SBA‐15 (SBA‐Pr‐SO₃H) as a heterogeneous solid acid catalyst under solvent‐free conditions.