Study of the kinetic parameters for synthesis and hydrolysis of pharmacologically active salicin isomer catalyzed by baker’s yeast maltase

One of the key elements for understanding enzyme reactions is determination of its kinetic parameters. Since transglucosylation is kinetically controlled reaction, besides the reaction of synthesis, very important is the reaction of enzymatic hydrolysis of created product. Therefore, in this study, kinetic parameters for synthesis and secondary hydrolysis of pharmacologically active α isosalicin by baker’s yeast maltase were calculated, and it was shown that specifity of maltase for hydrolysis is approximately 150 times higher then for synthesis.     

Facile Total Synthesis of Benzo[b]furan Natural Product XH-14

An efficient and practical total synthesis of benzo[b]furan natural product XH-14 is demonstrated in nine steps from vanillin. Introduction of iodide substituents in the reaction including optimization of the reaction sequences is essential for the successful synthesis of XH-14. Sonogashira coupling with iodobenzene, iodine-induced cyclization, Wittig reaction, and formylation are critical in the high-yield total synthesis of XH-14.     

Intermediacy of silylene and germylene in direct synthesis of organosilanes and organogermanes

In the direct synthesis of silicon compounds by reactions of elemental silicon with methyl chloride, methanol and hydrogen chloride, silylene formed on surface of silicon grains during the reaction is an intermediate. The reaction of surface silylene with a variety of unsaturated hydrocarbons provides new direct synthesis of organosilanes. In the direct synthesis of methylchlorogermanes from elemental germanium, surface germylene is not an intermediate, while tetrachlorogermane is synthesized by the direct reaction of germanium with hydrogen chloride via dichlorogermylene intermediate. Various unsaturated hydrocarbons or organic chlorides added to the system of tetrachlorogermane synthesis give new methods for the synthesis of organogermanes.     

Synthesis of the cycloheptannelated indole fragment of dragmacidin E

Synthesis of the pivotal cycloheptannelated indole fragment of indole alkaloid dragmacidin E is achieved. The synthesis features a Pd-catalyzed indole synthesis reaction for the preparation of 3,7-disubstituted indole, a regioselective intramolecular Friedel–Crafts reaction for the construction of the 3,4-bridged cycloheptannelated indole skeleton, and a coupling reaction of vinyl triflate with diorganocuprate.     

A short enantioselective synthesis of (+)-eleutherin, (+)-allo-eleutherin and a formal synthesis of (+)-nocardione B

A short enantioselective synthesis of (+)-eleutherin, (+)-allo-eleutherin and the formal synthesis of (+)-nocardione B is described. The synthesis is completed in six steps in overall yields of 8% for eleutherin and 14% for allo-eleutherin. The synthetic strategy features an efficient combination of the Dötz annulation reaction with a chiral alkyne and an oxa-Pictet Spengler reaction as the keys steps in the stereodivergent synthesis of (+)-eleutherin and (+)-allo-eleutherin. The synthesis of (S)-(+)-2-(2′-hydroxypropyl)-5-methoxy-1,4-naphthoquinone entails the formal synthesis of (+)-nocardione B.     

Process intensification for synthesis of triglycerides of capric acid using green approaches

The present research focuses on intensified synthesis of tricaprin by esterification reaction between capric acid and glycerol catalysed by dry amberlyst-15 using ultrasonication approach. Effect of several reaction conditions like molar ratio, reaction temperature, and amberlyst-15 loading on the rate of conversion has been studied. Effect of ultrasonic conditions like duty cycle and irradiation time on the intensified synthesis is investigated. Recyclability of amberlyst-15 is studied to make process more economical. It is investigated that the optimum reaction conditions which gave maximum conversion of 95% were molar ratio of capric acid: glycerol as 3:5, reaction temperature 90 ​°C, 4% amberlyst −15 loading. It was further investigated that ultrasonic conditions which gave intensified synthesis were 70% duty cycle and irradiation time of 120 ​min. The ultrasonic assisted process was compared with conventional synthesis. Conventional synthesis gave 30% yield in 120 ​min and 82% in 18 ​h. Amberlyst-15 was successfully reused for 13 cycle without any change in the conversion (%) of reaction.     

Intermediacy of silylene and germylene in direct synthesis of organosilanes and organogermanes

In the direct synthesis of silicon compounds by reactions of elemental silicon with methyl chloride, methanol and hydrogen chloride, silylene formed on surface of silicon grains during the reaction is an intermediate. The reaction of surface silylene with a variety of unsaturated hydrocarbons provides new direct synthesis of organosilanes. In the direct synthesis of methylchlorogermanes from elemental germanium, surface germylene is not an intermediate, while tetrachlorogermane is synthesized by the direct reaction of germanium with hydrogen chloride via dichlorogermylene intermediate. Various unsaturated hydrocarbons or organic chlorides added to the system of tetrachlorogermane synthesis give new methods for the synthesis of organogermanes.     

TBAI-mediated regioselective 5-exo-dig iodinative oxocyclization of 2-alkynylbenzamides for the synthesis of isobenzofuran-1-imines and isobenzofurans

Alkyne-based regioselective functionalization is an important transformation method for the synthesis of a wide variety of organic products. In this work, a regioselective TBAI-mediated oxidative 5-exo-dig iodo-oxycyclization of 2-alkynylbenzamide is used for the synthesis of various isobenzofuran derivatives with excellent functional group tolerance and high reaction efficiency. We hypothesized that using water in a mixed solvent could change the reaction pathway and realize a high reaction regioselectivity. Furthermore, the application of the developed procedure was demonstrated by the synthesis of phthalazin-1(2H)-one and aryl-substituted isobenzofurans.     

A facile and convenient approach to the synthesis of 3,5-diaryl-1H-pyrazoles

A simple and convenient one-pot synthesis route is described for the synthesis of 3,5-diaryl-1H-pyrazoles in short reaction times from the reaction of α-epoxyketones with semicarbazide hydrochloride under mild conditions.     

A novel isocyanide-based three-component reaction: a facile synthesis of substituted 2H-pyran-3,4-dicarboxylates

An efficient method for synthesis of 2H-pyran-3,4-dicarboxylates using the three-component reaction of dithiocarbamates, dialkyl acetylenedicarboxylates, and isocyanides in solvent-free conditions is described. In these reactions, synthesis of dithiocarbamates is possibly based on the one-pot reaction of secondary amines, CS₂, and alkyl halides in solvent-free conditions without using a catalyst. The mild reaction conditions and high yields of the reaction exhibit the good synthetic advantage of these methods.     

An Easy and Efficient Synthesis of Bisindolylmethanes and Tetraindolylmethane Tröger's Base Catatlyzed by AgBF4

This work presents a highly efficient and simple method for the synthesis of bisindolylmethanes, catalyzed by AgBF₄, with excellent yields. Various substituted aldehydes and ketones with indole under this reaction condition is elucidated. This reaction occurs efficiently under mild reaction conditions, such as are applied with methoxy or furfural, which commonly undergoes cleavage under strongly acidic reaction conditions. The presented approach was suitable for the synthesis of complex systems, such as tetraindolylmethane Tröger's Base.     

Microwave Assisted One-pot Synthesis of 2-Amino-4H-chromenes and Spiropyrano[2,3-d]pyrimidine

A convenient and efficient method using microwave assisted one pot synthesis reactions for synthesis of 4H‐benzo[f]chromenes by the reaction of aromatic aldehydes with a mixture of malononitrile and naphthols was examined. The synthesis of spiropyrano[2,3‐d]pyrimidines by the reaction of isatin with malononitrile and barbituric acid and/or thiobarbituric acid was investigated. The versatility of the method was also examined through the reaction of aromatic aldehydes and malononitrile with various reagents.     

A New Method of Low Temperature Methanol Synthesis

Low temperature methanol synthesis is a promising technique for the practical methanol industry. New developments of a new kind of low temperature methanol synthesis were reviewed, including the effects of feed gas, reaction solvent, supercritical media and catalyst modification. The reaction mechanism and kinetics were also summarized primarily. Carbon dioxide played an important role in this new kind of low temperature methanol synthesis. It reacted with hydrogen adsorbed on catalyst surface to form HCOOM, an important reaction intermediate. Alcohol solvent in the low temperature methanol synthesis performed not only a media, but also a homogeneous catalyst. The reaction of the adsorbed formate species with alcohol on Cu/ZnO catalyst surface proceeded according to the Rideal mechanism rather than Langmuir–Hinshelwood mechanism to form alkyl formate. The formation of alkyl formate from alcohol solvent and hydrogenation of such an alkyl formate were the key steps in low temperature methanol synthesis reaction. These results provided new insights into low temperature methanol synthesis.     

Total Synthesis of (−)-Glaucocalyxin A

A practically useful method for the formation of the highly oxygenated bicyclo[3.2.1]octane ring system through Mn(OAc)₃-mediated radical cyclization of alkynyl ketones was developed, which opens up a new avenue for the total synthesis of a number of highly oxidized diterpenoids. Application of this method enabled the first total synthesis of (−)-glaucocalyxin A. Other salient features of the synthesis include a highly enantioselective conjugate addition/acylation cascade reaction, a Yamamoto aldol reaction, and an intramolecular Diels–Alder reaction to assemble the A/B ring system.     

Synthesis of Functionalized Novel α‐Amino‐β‐alkoxyphosphonates through Regioselective Ring Opening of Aziridine‐2‐phosphonates

Aziridines are highly useful compounds as building blocks for the synthesis of important organic compounds. Amino acid synthesis by aziridine ring opening reaction is a good example to the use of aziridines. Although this reaction is studied by many groups, the synthesis of amino phosphonic acids is less explored. In this study, we have carried out the ring opening reaction of aziridinyl phosphonates with a variety of alcohols including the more functional propargylic and allylic alcohols. These reactions provided functionalized α‐amino‐β‐alkoxyphosphonates in 40–91 % yield.     

Eco-friendly synthesis of 2-azetidinone analogs of isonicotinic acid hydrazide

Abstract

2-Azetidinones possess broad and potent activity due to presence of β-lactam ring and has been established as one of the biologically important scaffolds. The synthesis of N-(4-aryl-2-oxoazetidinone)-isonicotinamide by novel methods of stirring and sonication are described. The conventional method for synthesis of 2-azetidinones involves use of Dean–Stark water separator for the removal of water from the reaction with long reaction time (12–16 h reflux) at a very low temperature (?70 to ?90°C). The microwave method reported requires inert atmosphere of nitrogen gas for the synthesis of 2-azetidinones. We report herein the synthesis of 2-azetidinone analogs of isonicotinic acid hydrazide by novel green route methods of sonication and stirring using molecular sieves. Results indicate that higher yields and shorter reaction times can be achieved by employing novel green route methods of synthesis.     

Development in the green synthesis of cyclic carbonate from carbon dioxide using ionic liquids

This brief review presents the recent development in the synthesis of cyclic carbonate from carbon dioxide (CO₂) using ionic liquids as catalyst and/or reaction medium. The synthesis of cyclic carbonate includes three aspects: catalytic reaction of CO₂ and epoxide, electrochemical reaction of CO₂ and epoxide, and oxidative carboxylation of olefin. Some ionic liquids are suitable catalysts and/or solvents to the CO₂ fixation to produce cyclic carbonate. The activity of ionic liquid is greatly enhanced by the addition of Lewis acidic compounds of metal halides or metal complexes that have no or low activity by themselves. Using ionic liquids for the electrochemical synthesis of the cyclic carbonate can avoid harmful organic solvents, supporting electrolytes and catalysts, which are necessary for conventional electrochemical reaction systems. Although the ionic liquid is better for the oxidative carboxylation of olefin than the ordinary catalysts reported previously, this reaction system is at a preliminary stage. Using the ionic liquids, the synthesis process will become greener and simpler because of easy product separation and catalyst recycling and unnecessary use of volatile and harmful organic solvents.     

Nickel N‐Heterocyclic Carbene Catalyzed CC Bond Formation: A New Route to Aryl Ketones

A novel nickel N‐heterocyclic carbene catalyzed cross‐coupling reaction of aryl aldehydes with boronic esters for the synthesis of aryl ketones was developed. This reaction provides a mild, practical method toward aryl ketones, which are versatile intermediates and building blocks in organic synthesis.     

Total Synthesis of (−)‐Glaucocalyxin A

A practically useful method for the formation of the highly oxygenated bicyclo[3.2.1]octane ring system through Mn(OAc)₃‐mediated radical cyclization of alkynyl ketones was developed, which opens up a new avenue for the total synthesis of a number of highly oxidized diterpenoids. Application of this method enabled the first total synthesis of (?)‐glaucocalyxin A. Other salient features of the synthesis include a highly enantioselective conjugate addition/acylation cascade reaction, a Yamamoto aldol reaction, and an intramolecular Diels–Alder reaction to assemble the A/B ring system.