Click chemistry on solid support: synthesis of a new REM resin and application for the preparation of tertiary amines

1,3-Dipolar cycloaddition was employed for the synthesis of a highly practical REM resin. Exploiting this concept, the resulting triazolylmethyl acrylate (TMA) resin was used for an efficient parallel synthesis of tertiary amines by Michael addition, subsequent quarternization and cleavage by means of β-elimination.     

A convenient synthesis of 5-(1,2,4-oxadiazol-5-yl)pyrimidine-2,4(1H,3H)-diones

The synthesis of 5-heteroaryl-substituted uracil derivatives is presented. The 1,3-dipolar cycloaddition reaction was applied for the construction of a heterocyclic ring. The nitrile oxides were obtained from the appropriate 4-substituted benzaldoximes using N-chlorosuccinimide (NCS) under basic conditions. [2+3] Cycloaddition of nitrile oxides with 5-cyanouracil as a dipolarophile gave the corresponding 5-(3-substituited-1,2,4-oxadiazol-5-yl)uracils in satisfactory yields under mild conditions. 5-Substituted uracils having an additional heterocyclic ring were obtained as a result of the [2+3] cycloaddition of 5-cyanouracil to nitrile oxides generated from thiophene-2-carbaldehyde and 5-formyluracil derivatives.     

An efficient reagent for 5′-azido oligonucleotide synthesis

A new bromohexyl phosphoramidite was synthesized and used for the introduction of an azide function at the 5′-end of oligonucleotides after a treatment on solid support with sodium azide and sodium iodide. The corresponding 5′-azido oligonucleotide could be further used for ‘Click’ conjugation with alkyne derivatives or by Staudinger ligation.     

Copper-catalyzed synthesis of 5-substituted 1H-tetrazoles via the [3+2] cycloaddition of nitriles and trimethylsilyl azide

The [3+2] cycloaddition between various nitriles and trimethylsilyl azide proceeds smoothly in the presence of a Cu^I catalyst in DMF/MeOH, to give the corresponding 5-substituted 1H-tetrazoles in good to high yields. The reaction most probably proceeds through the in situ formation of a copper azide species, followed by a successive [3+2] cycloaddition with the nitriles.     

A stereoselective method for the synthesis of enantiopure 3-substituted 4-hydroxyproline derivatives via 1,3-dipolar cycloadditions

The stereoselective 1,3-dipolar cycloaddition between (Z)-1,4-dichloro-2-butene and a menthone-derived nitrone led to the corresponding isoxazolidine. Regioselective azidation of a single chlorine atom followed by another Cu(I)-catalyzed azide–alkyne 1,3-dipolar cycloaddition (CuAAC) induced enantiopure 1,2,3-triazolyl-functionalized isoxazolidines. The subsequent acidic cleavage of the menthone chiral auxiliary and reductive cleavage of the isoxazolidine N–O bond triggered an intramolecular cyclization through the displacement of the second chlorine. This rapid and stereoselective synthetic strategy provided reliable access to a series of enantiopure 3-substituted 4-hydroxyproline derivatives.     

Microwave assisted synthesis of triazolobenzoxazepine and triazolobenzoxazocine heterocycles

Intramolecular click chemistry was utilized to effect synthesis of the benzofused, triazole ring systems. The trimethylsilyl group was found to impede the reaction progress, and therefore, conditions employing in situ removal of the TMS group coupled with microwave irradiation give the penultimate targets with good conversion.     

Synthesis of 5-substituted 1H-tetrazoles catalyzed by ytterbium triflate hydrate

Various 5-substituted 1H-tetrazoles were synthesized from aryl nitriles, alkyl nitriles, and vinyl nitriles reacting with sodium azide. The tetrazoles were recovered in high yield under mild conditions when the reaction was catalyzed by ytterbium triflate hydrate in dimethylformamide. Other rare-earth and post-transition metal catalysts were also investigated.     

One-pot regioselective vinylation of tetrazoles: preparation of 5-substituted 2-vinyl-2H-tetrazoles

The one-pot regioselective preparation of 5-aryl/alkyl-2-vinyl-2H-tetrazoles from 5-substituted tetrazoles via a very simple procedure using 1,2-dibromoethane and triethylamine without the need of any catalyst is described. The mechanism of this reaction is also discussed.     

An efficient one-pot synthesis of C2-symmetric triazolophanes by copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction

A facile and efficient one-pot synthesis of 12-15-membered triazolophanes has been accomplished using CuAAC methodology. The formation of triazolophanes was confirmed by spectral analysis and the products were isolated in good yield. The effect of solvents on this reaction was also studied.     

Domino addition of allylzinc bromide to nitrile oxides: synthesis of 5-butenylisoxazolines

Nitrile oxides undergo addition to allylzinc bromide to generate 5-butenylisoxazolines in good yields.     

Click chemistry and biocatalysis for the preparation of pancratistatin analogs

Tricyclic compounds that are advanced precursors for the synthesis of analogs of the antitumoral alkaloid pancratistatin were prepared by a short sequence that involved enzymatic dihydroxylation, epoxidation, and intramolecular Huisgen cycloaddition.     

Intramolecular copper(I)-catalyzed 1,3-dipolar cycloaddition of azido-alkynes: synthesis of triazolo-benzoxazepine derivatives and their biological evaluation

Synthesis of a series of [1,2,3] triazolo [5,1-c] [1,4]benzoxazepine derivatives have been accomplished by the intramolecular Cu(I)-catalyzed cycloaddition of azido-alkynes derived from salicylaldehyde. The biological profile of these heterocyclic structural scaffolds toward anti-bacterial as well as anti-fungal activity has also been illustrated.     

A facile synthesis and highly atom economic 1,3-dipolar cycloaddition of hexahydropyrido[3,4-c][1,5]benzothiazepines with nitrile oxide: stereoselective formation of hexahydro[1,2,4]oxadiazolo[5,4-d]pyrido[3,4-c][1,5]benzothiazepines

A series of new 2-methyl-11-aryl-4-[(E)-arylmethylidene]-1,2,3,4,11,11a-hexahydropyrido[3,4-c][1,5]benzothiazepines were obtained by the reaction of o-aminothiophenol and (E)-1-methyl-3,5-bis(arylidene)-4-piperidones in the presence of a catalytic amount of acetic acid under solvent-free microwave irradiation. These dipolarophiles undergo a highly atom economic 1,3-dipolar cycloaddition with nitrile oxide to afford a series of novel 6-methyl-1-phenyl-8-aryl-4-[(E)-arylmethylidene]-4,5,6,7,7a,8-hexahydro[1,2,4]oxadiazolo[5,4-d]pyrido[3,4-c][1,5]benzothiazepines stereoselectively.     

Synthesis of modified triazole nucleosides possessing one or two base moieties via a click chemistry approach

Copper-catalyzed 1,3-dipolar cycloaddition of propargyl and azidoethyl thymine and adenine derivatives afforded triazole nucleosides bearing one or two base moieties. A catalytic role of the adenine nucleus was observed and is explained through copper-adenine coordination in the intermediate copper acetylide-azide complex. The antioxidant activity of the obtained cycloadducts was tested.     

Sacrificial azomethine ylide cycloaddition controlled chemoselective nitrile oxide cycloaddition to 1-methyl-3,5-bis[(E)-arylmethylidene]tetrahydro-4(1H)-pyridinones: formation of mono-spiro-isoxazolines

The 1,3-dipolar cycloaddition of an azomethine ylide to 1-methyl-3,5-bis[(E)-arylmethylidene]tetrahydro-4(1H)-pyridinones afforded novel spiro-pyrrolidines in good yields. Further cycloaddition of these spiro-pyrrolidines with nitrile oxide afforded mono-spiro-isoxazolines in moderate yields (45-56%), presumably via a di-spiro intermediate, which undergoes a spontaneous cycloreversion of the spiro-pyrrolidine unit. In contrast, the direct cycloaddition of nitrile oxide to 1-methyl-3,5-bis[(E)-arylmethylidene]tetrahydro-4(1H)-pyridinones gave the mono-spiro-isoxazoline as the minor product, while the bis-spiro-isoxazolines are formed predominantly.     

Addressing the scope of the azide-nitrile cycloaddition in glycoconjugate chemistry. The assembly of C-glycoclusters on a calix[4]arene scaffold through tetrazole spacers

New glycoclusters constituted of ribosylmethyl, galactosylmethyl, and glucosylmethyl fragments assembled on a calix[4]arene platform by means of propoxytetrazole spacers have been prepared by coupling the corresponding sugar azides with p-toluenesulfonyl cyanide, and then reacting 1-glycosylmethyl-5-sulfonyl-tetrazole derivatives thus formed with a calix[4]arene tetrol.     

Synthesis of 5-substituted 1H-tetrazoles catalyzed by ceric ammonium nitrate supported HY-zeolite

In this Letter we wish to report a simple and efficient synthetic protocol for the synthesis of 5-substituted 1H-tetrazole derivatives through the [2+3] cycloaddition of nitriles with sodium azide using ceric ammonium nitrate supported HY-zeolite as a novel catalyst. Excellent yields of the corresponding tetrazoles were obtained through this cost-effective protocol under aerobic conditions with shorter reaction time under mild reaction conditions.     

A theoretical study of the effect of copper(I) chloride on the azido/tetrazole isomerism

B3LYP/6-31G(d), B3LYP/6-311++G(d,p), and CBS-QB3 calculations on the effect of CuCl on the azido/tetrazole isomerism have been performed. The cases of 2-azidopyridine and 2-azido-1H-imidazole have been selected as examples of heteroaromatic six- and five-membered rings. All minima and transition states have been characterized.     

Synthesis of new 1-substituted 4-perfluoroalkyl tetrazol-5-ones

1,3-Dipolar cycloaddition of perfluoroalkyl ethyle azides 1 with isocyanates 2 afforded 1-perfluoroalkyl-4-(n-Bu, phenyl or mesitylsulfonyl) tetrazol-5-ones 3 in good yields. The use of perfluoroalkyl ethyl azides extends the reaction to the less reactive n-butyl isocyanate.