Poly(ethylene glycol)-lipase complexes catalytically active in fluorous solvents

Lipase-catalyzed alcoholysis between vinyl cinnamate and benzyl alcohol in fluorous solvents was investigated. This is the first report of a lipase-catalyzed reaction in a fluorous solvent. Forming the poly(ethylene glycol)(PEG)-lipase PL complex enhanced lipase activity over 16-fold over that of native lipase powder. The PEG-lipase PL complex exhibited markedly higher alcoholysis activities in fluorous solvents than in conventional organic solvents such as isooctane and n-hexane. The optimum reaction temperature for FC-77 (perfluorooctane) was 55 [degree]C and the optimum pH for the preparation of the PEG-lipase complex was 9.0; similar to the conditions for lipase PL-catalyzed reaction in aqueous solution. The alcoholysis reaction in fluorous solvent requires the addition of a FC77-miscible organic solvent (isooctane) in order to dissolve non-fluorinated substrates. Lipase activity in the fluorous solvent was significantly influenced by the volume ratio of isooctane in the reaction medium. Vinyl cinnamate inhibition of the lipase-catalyzed reaction occurred at a much lower concentration in the fluorous solvent than in isooctane. These results can be explained by the localization of substrates around lipase molecules, induced by adsorption of the substrates to the PEG layer of the PEG-lipase complex.     

Increasing fluorous partition coefficients by solvent tuning

Low partition coefficients of fluorous components have been a persistent problem in liquid-liquid separations using perfluoroalkanes as the fluorous phase. Solvent tuning of both the nonfluorous and the fluorous phase dramatically enhances the partitioning of light or polar fluorous molecules into the fluorous liquid phase, while minimally effecting partition coefficients of nonfluorous molecules. These findings suggest an expanded scope for liquid-based separations in fluorous biphasic catalysis, fluorous-tagged reagents, fluorous-supported oligomer synthesis, and related areas. [reaction: see text]     

Pronounced rate enhancements in condensation reactions attributed to the fluorous tag in modified Mukaiyama reagents

The observed rate enhancement for the condensation reaction between 2-phenyl benzoic acid and isopropanol mediated by fluorous Mukaiyama reagents is described. It is shown that Mukaiyama reagents bearing a fluorous tag increase the reaction rate considerably when compared to their non-fluorous tagged counterpart. Furthermore, it is observed that the longer the fluorous chain, the higher the activity of the Mukaiyama reagent.     

An alternative and facile purification procedure of amidation and esterification reactions using a medium fluorous Mukaiyama reagent

A convenient methodology for the separation of a fluorous by-product using fluorous chemistry is described. A Mukaiyama coupling reagent bearing a medium fluorous tag, between 40% and 60% fluorine by weight, can be effectively separated from non-fluorous components by increasing the water content of the crude reaction mixture and subsequent filtration. Additional fluorous solid phase extraction is not necessary.     

A convenient method for the preparation of fluorous tin derivatives for the fluorous labeling strategy

A convenient method for the preparation of fluorous aryl stannanes was developed as a means of expanding the general utility of the fluorous labeling strategy (FLS). Following the synthesis of a novel fluorous distannane, a palladium-catalyzed cross-coupling reaction was used to prepare the target compounds from aryl halides. The scope of the reaction was investigated by preparing a small library of model compounds where the reaction yields were similar to those reported for the analogous procedures employing hexamethyl- or hexabutyldistannanes. The utility of the reported methodology was demonstrated through the successful synthesis of fluorous precursors to two established molecular imaging and therapy agents (FIAU, IUdR). These were radiolabeled with iodine-125 and the desired products isolated in high yield and effective specific activity.     

Recoverable fluorous CBS methodology for asymmetric reduction of ketones

[reaction: see text]. An operationally simple and recoverable fluorous CBS methodology was developed. The in situ-generated fluorous oxazaborolidine efficiently catalyzed the reduction of ketones with high enantioselectivity and reactivity. The subsequent recycling of the fluorous prolinol precatalyst was achieved by fluorous solid-phase extraction.     

Fluorous imidazolium room-temperature ionic liquids based on HFPO trimer

Imidazole substituted with a polyfluoropolyether chain based on HFPO trimer combined with various polyfluoroalkyl triflates produced novel highly fluorous ionic liquids. Their metathesis with four different anions generated a final set of 20 fluorous ionic liquids of waxy or viscous liquid character, which are all soluble in perfluorinated solvents. Two model reactions using selected ionic liquid, the opening of a THF ring with benzoyl chloride under Friedel-Crafts conditions and substitution of benzyl chloride with sodium azide, led to decomposition of the ionic liquid. However, Diels-Alder reaction of 2,3-dimethylbuta-1,3-diene with dimethyl acetylenedicarboxylate in a fluorous ionic liquid resulted in a reasonable enhancing of the reaction rate with smooth recycle of the fluorous solvent. The fluorophilicity of these fluorous ionic liquids ranges from more than 10 for water, toluene or dichloromethane to less than 0.2 for acetonitrile or methanol.     

A practical fluorous benzylidene acetal protecting group for a quick synthesis of disaccharides

A new fluorous benzylidene acetal protecting group was regioselectively introduced into carbohydrates, deprotected under acidic conditions, and reused. Oligosaccharides were synthesized via regioselective conversion of the fluorous acetal group to the benzyl group by traditional reaction conditions. The fluorous compounds were easily separated from non-fluorous by-products by fluorous solid phase extraction.     

Use and recovery of a homogeneous catalyst with carbon dioxide as a solubility switch

A method for fluorous biphasic catalysis is described,in which the fluorous liquid is replaced by fluorinated silica, the fluorous catalyst is induced to dissolve in the organic solvent by the presence of CO2, and the recovery of the catalyst after the reaction is achieved by release of the CO2 pressure.     

Fluorous synthesis of hydantoins and thiohydantoins

[reaction: see text] A fluorous synthesis of hydantoins is introduced. The reaction of perfluoroalkyl (Rfh)-tagged amino esters with an isocyanate is followed by the cyclization of ureas and simultaneous cleavage of the fluorous tag to afford hydantoins. The product purification is performed by solid-phase extraction over FluoroFlash cartridges, and no fluorous solvent is involved in either the reaction or the separation processes. The same method applies to synthesis of thiohydantoins.     

Fluorous-enhanced multicomponent reactions for making drug-like library scaffolds

Multicomponent reactions (MCRs) generate multiple bonds in a single reaction process, which is highly efficient to construct relatively complex molecules. Conducting post-MCR modification reactions further increases the molecular complexity and diversity. MCR has become a powerful approach to make drug-like molecules in lead generation chemistry. In fluorous MCR (F-MCR), one of the starting materials is attached to a fluorous tag and used as the limiting agent. After the MCR, the fluorous component is fished out from the reaction mixture and used for post-MCR modifications. The fluorous tag can be finally removed in traceless fashion by displacement or cyclization reactions. Unique fluorous technology such as fluorous solid-phase extraction (F-SPE) facilitates the separation process. Other techniques such as microwave irradiation and plate-to-plate SPE can also be used to make the F-MCR even more efficient. Syntheses of unique heterocyclic and natural product-like library scaffolds using Ugi/de-Boc/cyclization, MCR/Suzuki coupling, and [3+2] cycloaddition/de-tag/cyclization protocols are described in this paper.     

Resolution of 1-(2-naphthyl)ethanol by a combination of an enzyme-catalyzed kinetic resolution with a fluorous triphasic separative reaction

[reaction: see text] Kinetic resolution of a fluorous ester rac-1 with Candida antarctica B lipase provided a mixture of enantioenriched alcohol (R)-2 and fluorous ester (S)-1. The mixture was subjected to a fluorous triphasic reaction to give both enantiomers of 1-(2-naphthyl)ethanol 2 in high ee without chromatographic separation or fluorous-organic liquid-liquid extractive purification.     

Fluorous dienophiles are powerful diene scavengers in Diels-Alder reactions

[reaction: see text] Three fluorous dienophiles have been synthesized, and their value in scavenging an excess diene after Diels-Alder reactions is shown. The resulting fluorous derivatives are separated by solid-phase extraction on fluorous silica gel (FSPE). The fluorous [1,2,4]triazoline-3,5-dione 10 reacted with most dienes within seconds or minutes.     

Stereoselective conjugate radical additions: application of a fluorous oxazolidinone chiral auxiliary for efficient tin removal

[reaction: see text] A series of asymmetric free-radical-mediated intermolecular conjugate additions using a fluorous oxazolidinone chiral auxiliary has been completed. The fluorous auxiliary facilitated product isolation using fluorous solid phase extractions (FSPE), effectively removing excess organic and organometallic reagents. Parallel reactions carried out with a similar but nonfluorous norephedrine-derived oxazolidinone demonstrated the superior stereoselectivity and purification obtainable with the fluorous chiral auxiliary.     

Preparation, properties, and synthetic potentials of novel boronates in a fluorous version (fluorous boronates)

[reaction: see text] A series of boronic acids were attached to a fluorous tag by esterification. Functional transformations of these boronates together with the fluorous Suzuki coupling reaction illustrated their usefulness in fluorous-phase techniques.     

p-Alkoxyphenyl-type heavy fluorous tag for the preparation of carbohydrate units

Carbohydrate glycosyl acceptor and donor moieties were synthesized efficiently by using the fluorous tag method. The p-alkoxyphenyl-type heavy fluorous tag was stable under all the reaction conditions used in the preparation of the various carbohydrate units. Each synthetic intermediate carrying the fluorous tag could be obtained in a simple straightforward manner by partition between fluorous and organic solvents.     

Synthesis, reaction, and recycle of light fluorous Grubbs-Hoveyda catalysts for alkene metathesis

Light fluorous versions of first- and second-generation Grubbs-Hoveyda metathesis catalysts are introduced. These exhibit the expected reactivity profile, are readily recovered from reaction mixtures by fluorous solid-phase extraction, and can be routinely reused five or more times. The catalysts can be used in a stand alone fashion, or supported on fluorous silica gel.     

Design, synthesis, and incorporation of fluorous 5-methylcytosines into oligonucleotides

A palladium-catalyzed Negishi coupling reaction has been developed to synthesize fluorous 5-methylcytosines. These fluorous nucleosides are incorporated into the oligonucleotides that correspond to part of the promoter region of Oct4, a master gene that undergoes dynamic DNA demethylation during cellular reprogramming. The separation of the fluorous oligonucleotides from its nonfluorous analogues has been achieved through solid-phase extraction over fluorous silica, suggesting its potential use in probing DNA demethylation.     

A fluorous Mukaiyama coupling reagent for a concise condensation reaction: utility of medium-fluorous strategy

The entire study of condensation reactions using various fluorous Mukaiyama reagents, including a novel medium-fluorous strategy, is described. A Mukaiyama reagent bearing a medium-fluorous content tag, between 40 and 60% fluorine by weight, was prepared and examined in ester and amide-forming condensation reactions. At the end of the reactions, the fluorous pyridone by-product was effectively separated from non-fluorous components by increasing the water content of the crude reaction mixture and subsequent filtration of the precipitate. It is also shown that Mukaiyama reagents bearing a fluorous tag increase the reaction rate considerably when compared to their non-fluorous tagged counterpart. Interestingly, it was observed that the longer the fluorous chain, the higher the activity of the Mukaiyama reagent.     

An effective and catalytic oxidation using recyclable fluorous IBX

Oxidation of alcohols in the presence of a catalytic amount of fluorous IBX and Oxone as a co-oxidant resulted in the corresponding carbonyl compounds in good to high yields. The fluorous IBX is readily recovered as insoluble fluorous IBA from the reaction mixture by simple filtration, and can be reused without significant loss of the catalytic activity.