Electrophilic (phenylsulfonyl)difluoromethylation of thiols with a hypervalent iodine(III)-CF2SO2Ph reagent

A hypervalent iodine(III)-CF₂SO₂Ph compound (3) has been successfully prepared with selective nucleophilic reaction using PhSO₂CF₂SiMe₃ reagent, and this previously unkown compound 3 was found to act as a new electrophilic (phenylsulfonyl)difluoromethylation reagent for a variety of S-nucleophiles under very mild reaction conditions.     

Synthesis and characterization of bis(diphenylphosphinomethyl)amino ligands and their Ni(II), Pd(II) complexes: Application to hydrogenation of styrene

Transition metal complexes of Ni(II) and Pd(II) with ditertiary bis(diphenylphosphinomethyl)amino ligands, (Ph₂PCH₂)₂NC(CH₃)₃ ( 1 ) and [(Ph₂PCH₂)Nm‐PhSO₃]Na ( 2 ) (Ph = phenyl), have been synthesized in good yields under nitrogen atmosphere by Schlenk technique. All complexes have been characterized using elemental analyses and spectroscopic techniques such as atomic absorption, FT‐IR, and NMR (¹H, ³¹P). Atomic absorption spectroscopic analysis showed that the reactions of ligands 1 and 2 with NiCl₂ ⋅ 6H₂O and [PdCl₂(COD)] occurred in 1:1 molar ratio. The metal complexes [NiCl₂(Ph₂PCH₂)₂Nm‐PhSO₃Na] ( 4 ) and [PdCl₂(Ph₂PCH₂)₂Nm‐PhSO₃Na] ( 6 ) were found to be soluble in ethanolic and aqueous solutions, as well as slightly soluble in water. Electrochemical behaviors of complexes were investigated by cyclic voltammetry. Catalytic effects of Pd(II) complexes were tested throughout the hydrogenation of styrene to ethylbenzene. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:113–118, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20384     

Coordination of Phenylsulfinate PhSO2— to Mo3MS44+ Clusters (M = Ni,Pd)

Reaction of heterometal cuboidal clusters [Mo₃(MCl)S₄(H₂O)₉]³⁺ (M = Ni, Pd) with PhSO₂Na in aqueous HCl leads to the substitution at Ni or Pd to give the [Mo₃(M(PhSO₂))(H₂O)_9—xCl_x]^(3—x)+species, isolated as supramolecular adducts with cucurbituril (Cuc) [Mo₃(Ni(PhSO₂))S₄Cl_1.17(H₂O)_7.83][Mo₃(Ni(PhSO₂))S₄Cl_2.22(H₂O)_6.78]Cl_2.61 · Cuc · 15H₂O ( 1 ) and [Mo₃(Pd(PhSO₂))S₄Cl_1.12(H₂O)_7.88][Mo₃(Pd(PhSO₂))S₄Cl_2.29(H₂O)_6.71]Cl_2.59 · Cuc · 11H₂O ( 2 ), respectively. Crystal structure of 1 and 2 was determined, revealing that the PhSO₂ is coordinated via its sulfur atom (Ni — S 2.182 Å, Pd — S 2.305 Å). The structure of these isostructural compounds is built from triple aggregates {(cluster)(Cuc)(cluster)} united into zigzag chains via hydrogen bonds between coordinated PhSO₂ and H₂O ligands.     

Rare direct imidation of aromatic metallacycle by reaction of CpCo(dithiolene) complex with N-halosuccinimide

The aromatic [CpCo(S₂C₂(R)(H))] (R = Ph, Me, 9-phenanthryl, H) complexes reacted with N-halosuccinimides (NXS; X = Cl, Br, I) in carbon tetrachloride at room temperature to undergo the N-succinimide substitution reaction on the dithiolene ring, but no halogenated dithiolene complex was obtained. The imidation products [CpCo(S₂C₂(R)(N-sccinimide))] were yielded up to 64% where X = I and R = 9-phenanthryl. The reaction of [CpCo(S₂C₂(Ph)(H))] with N-bromophthalimide (NBP) also gave the imidation product [CpCo(S₂C₂(Ph)(N-phthalimide))]. This is the rare direct imidation reaction to an aromatic metallacycle by NXS. The reaction of [CpCo(S₂C₂H₂)] (R = H) with NIS afforded the double imidation product. One by-product in this reaction was the dithiolene-dithiolene homo-coupling product [CpCo(S₂C₂(R))]₂ (R = Ph, Me, 9-phenanthryl). The microwave-enhanced (MW) reactions were attempted in the carbon tetrachloride solution. Although the solution temperature increased up to only 43 °C by MW irradiation, the imidation reaction worked with short reaction time.     

Di- and tri-organotin(IV) complexes of the new bis(1-methyl-1H-imidazol-2-ylthio)acetate ligand and the decarboxylated analogues

The new sodium bis(1-methyl-1H-imidazol-2-ylthio)acetate, Na[(S-tim)₂CHCO₂], has been prepared in ethanol solution using 2-mercapto-1-methylimidazole, dibromoacetic acid and NaOH. New di- and tri-organotin(IV) derivatives have been synthesized from reaction between SnR_nCl_4−n (R = Ph, Cy and ⁿBu, n = 2-3) acceptors and Na[(S-tim)₂CHCO₂]. Complexes of the type {[κ¹O-(S-tim)₂CHCO₂]SnR₃} and related decarboxylated species {[κ²N,N-(S-tim)₂CH₂]SnR₂Cl₂} have been obtained and characterized by elemental analyses, FT-IR, ESIMS and multinuclear (¹H, ¹³C and ¹¹⁹Sn) NMR spectral data. The adduct {κ¹O-[(S-tim)₂CHCO₂]Sn(H₂O)(C₄H₉)₃} was characterized by single crystal X-ray studies. The dichloromethane reaction solution of {κ¹O-[(S-tim)₂CHCO₂]Sn(C₆H₅)₃} was re-crystallized and the decarboxylated species {[(S-tim)₂CH₂]SnCl(H₂O)(C₆H₅)₃} was obtained as a crystalline solid and characterized by X-ray crystallography.     

TFA promoted multi-component reaction of aryldiazonium with sodium metabisulphite and thiols: Construction of thiosulfonate under transition-metal free conditions

A TFA promoted multi-component reaction of aryldiazonium with sodium metabisulphite and thiols to construct thiosulfonates under transition-metal free conditions is reported. The thiosulfonates were isolated in good yields with broad tolerance of functional group. Readily available inorganic Na₂S₂O₅ was applied as the sulfur dioxide surrogate. This strategy features easily available substrates, mild reaction conditions and free transition-metal catalyst.     

PhSO2SCF2H: A Shelf‐Stable,Easily Scalable Reagent for Radical Difluoromethylthiolation

A new shelf‐stable and easily scalable difluoromethylthiolating reagent S‐(difluoromethyl) benzenesulfonothioate (PhSO₂SCF₂H) was developed. PhSO₂SCF₂H is a powerful reagent for radical difluoromethylthiolation of aryl and alkyl boronic acids, decarboxylative difluoromethylthiolation of aliphatic acids, and a phenylsulfonyl‐difluoromethylthio difunctionalization of alkenes under mild reaction conditions.     

Nucleophilic, radical, and electrophilic (phenylsulfonyl)difluoromethylations

Selective incorporation of a fluoroalkyl moiety to modulate the properties of an organic molecule has become a frequently used strategy in life science- and materials science-related applications. In this context, selective introduction of a (phenylsulfonyl)difluoromethyl group (PhSO₂CF₂) into organic molecules has attracted much attention, since the PhSO₂CF₂ group can be regarded as a “chemical chameleon” that can be readily transformed into difluoromethyl (CF₂H), difluoromethylene (–CF₂–), and difluoromethylidene (CF₂) functionalities. This article overviews the recent development of (phenylsulfonyl)difluoromethylation reactions from 2003, including the nucleophilic (phenylsulfonyl)difluoromethylations with PhSO₂CF₂H, PhSO₂CF₂SiMe₃ and PhSO₂CF₂Br reagents, free radical (phenylsulfonyl)difluoromethylations with PhSO₂CF₂I reagent, and electrophilic (phenylsulfonyl)difluoromethylations with a hypervalent iodine(III)-CF₂SO₂Ph reagent.     

PhSO2SCF2H: A Shelf‐Stable,Easily Scalable Reagent for Radical Difluoromethylthiolation

A new shelf‐stable and easily scalable difluoromethylthiolating reagent S‐(difluoromethyl) benzenesulfonothioate (PhSO₂SCF₂H) was developed. PhSO₂SCF₂H is a powerful reagent for radical difluoromethylthiolation of aryl and alkyl boronic acids, decarboxylative difluoromethylthiolation of aliphatic acids, and a phenylsulfonyl‐difluoromethylthio difunctionalization of alkenes under mild reaction conditions.     

The reaction of (Sp)-2-(diphenylphosphino)ferrocenecarboxylic acid with carbodiimide reagents: Characterisation of the acid anhydride and urea products

Interaction of (S_p)-2-(diphenylphosphino)ferrocenecarboxylic acid [(S_p)-1] with N,N′-dicyclohexylcarbodiimide (DCC) and N-ethyl-N′-[3-(dimethylamino)propyl]carbodiimide (EDC) have been investigated in order to study the reacting system itself and to characterise side-products typically arising during the diimide-promoted condensation of acid (S_p)-1 with nucleophiles. The reaction between (S_p)-1 and DCC was found to give preferentially the respective urea derivative in the absence of a base, and (S_p)-2-(diphenylphosphino)ferrocenecarboxylic anhydride [(S_p,S_p)-3] when the same reaction was performed in the presence of 4-(dimethylamino)pyridine (DMAP). With EDC, the preference for a reaction pathway was less pronounced: whereas the reaction without the base afforded exclusively the corresponding urea, that in the presence of DMAP yielded a mixture of the urea and anhydride (S_p,S_p)-3.     

Coordination chemistry of ester-functionalized cp ligands: synthesis and catalytic activity of [Rh{CpCO2(CHPh)2OH}(NBD)] and [Rh{CpCO2(CH2)3OH}(NBD)]

Two new sodium hydroxyalkoxycarbonylcyclopentadienide salts Na[rac-CpCO₂(CHPh)₂OH] (1) and Na[(2S,3S)-CpCO₂(CHPh)₂OH] (2) were prepared by reaction of NaCp with the five-membered cyclic carbonates cis-4,5-diphenyl-1,3-dioxolan-2-one and (4S,5S)-4,5-diphenyl-1,3-dioxolan-2-one. The reaction of these salts with [Rh(NBD)Cl]₂ gave [Rh{rac-CpCO₂(CHPh)₂OH}(NBD)] (3) and (−)-[Rh{(2S,3S)-CpCO₂(CHPh)₂OH}(NBD)] (4) whose catalytic activity in the hydroformylation of hex-1-ene and styrene has been investigated and compared with that of the previously reported rhodium complexes [Rh{CpCO₂(CHR)₂OH}(NBD)] (R=H, Me). In addition we also discuss some preliminary results regarding the behavior of these complexes in the hydrogenation of the same substrates. The reactivity of NaCp toward the six-membered cyclic carbonate 1,3-dioxan-2-one has also been studied and it has been found that the reaction leads to two cyclopentadienide anions [CpCO₂(CH₂)₃OH]⁻ (5) and [CpCO₂(CH₂)₃OC(O)O(CH₂)₃OH]⁻ (6) in amounts strictly dependent on the carbonate/NaCp stoichiometric ratio.     

Guanine/Ionic Liquid Derived Ordered Mesoporous Carbon Decorated with AuNPs as Efficient NADH Biosensor and Suitable Platform for Enzymes Immobilization and Biofuel Cell Design

Guanine‐ionic liquid derived ordered mesoporous carbon (GIOMC) decorated with gold nanoparticles was used as electrocatalyste for NADH oxidation and electrochemical platform for immobilization of glucose dehydrogenase (GDH) enzyme. The resulting GIOMC/AuNPs on the glassy carbon electrode can be used as novel redox‐mediator free for NADH sensing and this integrated system (GIOMC/AuNPs/GDH) shows excellent electrocatalytic activity toward glucose oxidation. Furthermore, the ionic liquid derived ordered mesoporous carbon derivate with Ph‐SO₃H (IOMC‐PhSO₃H) decorated with AuNPs has been developed to bilirubin oxidase enzyme (BOD) immobilization and the GC/IOMC‐PhSO₃H/BOD integrated system shows excellent bioelectrocatalytic activity toward oxygen reduction reaction. The proposed mesostructured platforms decorated by AuNPs have been developed to enhance mass transfer and charge transfer from biocatalyst to electrode, leading these bioanode and biocathode used for biofuel cell assembly. Integration designed bioanode and biocathode yielding a membrane‐less glucose/O₂ biofuel cell with power density of 33 (mW.cm⁻²) at 257 mV. The open circuit voltage of this biofuel cell and maximum produced current density were 508 mV and 0.252 (mA.cm⁻²) respectively.     

Theoretical investigations on R(O)nS-NO (n=0,1,2) systems

In the current article we report the ab initio study on the stability of S-Nitrosothiols (MeSNO, 1) and their oxidised derivatives (MeS(O)NO, 2) and (MeS(O)₂NO, 3). The bond length, bond order, rotational barrier and bond dissociation energy have been calculated and compared with that of sulfenamide (HS-NH₂) and its oxidised derivatives sulfinamide (H(O)S-NH₂) and sulfonamide (H(O)₂S-NH₂). The S-N bond dissociation energy in the oxidised state is very small compared to parent RSNO indicating the weakness of sigma bond. NBO analysis suggests that the negative hyperconjugative interactions are very strong in S-nitrosothiols and their oxidised derivatives, which weaken the sigma bond and facilitate the release of nitric oxide.     

Insertion Reactions of Carbon Disulfide into Mg‐C and Mg‐N Bonds: Syntheses and Structural Determinations of Mg(S2CY)2(THF)n(Y=NEt2, NiPr2, iPr,Ph) and BrMg(S2CZ)(THF)3(Z=Ph,iPr)

The insertion reaction of CS₂ with Mg(NR₂)₂ (R= Et, ⁱPr), MgR′₂ (R′= Et, Ph) and R″MgBr (R″= ⁱPr, Ph) respectively lead solid products, Mg(S₂CNR₂)₂(THF)_n ( 1 : R= Et, n=2; 2 : R= ⁱPr, n=1), Mg(S₂C′R)₂(THF)₂ ( 3 : ′R= Et, 4 : ′R= Ph), BrMg(S₂C″R) (THF)₃ ( 5 : ″R= ⁱPr, 6 : ″R= Ph) in which the inserted carbon disulfides act as terminal chelating ligands. These compounds were characterized with ¹H, ¹³C NMR, IR spectroscopy, mass spectrometry, elemental analyses, and X‐ray crystallography.     

Synthesis, structure, and ionic conductivity of Na5Li3Ti2S8

The compound Na₅Li₃Ti₂S₈ has been synthesized by the reaction of Ti with a Na/Li/S flux at 723 K. Na₅Li₃Ti₂S₈ crystallizes in a new structure type with four formula units in space group C2/c of the monoclinic system. The structure contains three crystallographically independent Na⁺ cations and two crystallographically independent Li⁺ cations. Na₅Li₃Ti₂S₈ possesses a channel structure that features two-dimensional layers built from Li(1)S₄ and TiS₄ tetrahedra. The layers, which are stacked along c, comprise eight-membered rings and sixteen-membered rings. Na(3)⁺ cations are located between the eight-membered rings and Na(1)⁺, Na(2)⁺, and Li(2)⁺ cations are located between the sixteen-membered rings. These cations are each octahedrally coordinated by six S²⁻ anions. The ionic conductivity σ_T of Na₅Li₃Ti₂S₈ ranges from 8.8×10⁻⁶ S/cm at 303 K to 3.8×10⁻⁴ S/cm at 483 K. The activation energy E_a is 0.40 eV.     

Planar chiral alkenylferrocene phosphanes: Preparation, structural characterisation and catalytic use in asymmetric allylic alkylation

Planar chiral alkenylferrocene phosphanes, viz. (S_p)-[Fe(η⁵-C₅H₃-1-PPh₂-2-CHCR₂)(η⁵-C₅H₅)] (R = H, (S_p)-2; Ph, (S_p)-5) and (S_p)-[Fe(η⁵-C₅H₃-1-PPh₂-2-(E)-CHCHR)(η⁵-C₅H₅)] (R = Ph, (S_p)-3; C(O)CH₃, (S_p)-6; and CO₂CH₂CH₃, (S_p)-7) have been prepared by alkenylation of (S_p)-2-(diphenylphosphanyl)ferrocenecarboxaldehyde and tested as ligands for enantioselective palladium-catalysed allylic alkylation of 1,3-diphenyprop-2-en-1-yl acetate with dimethyl malonate. All phosphanylalkenes formed active catalysts. However, the induced enantioselectivity was only poor to moderate [12-43% ee after 20 h at room temperature], with the ee’s and configuration of the preferred product strongly depending on the ligand structure. The catalytic results have been related to solution properties (NMR, ESI MS) and the solid-state structural data (X-ray diffraction) of [Pd(η³-1,3-Ph₂C₃H₃){(S_p)-2-η²:κP}]ClO₄ ((S_p)-12), which represent a model of the plausible reaction intermediate.     

Addition of dimethylphenylphosphine at bridging vinyl,acetylene and phenylacetylide ligands in triosmium clusters

PMe₂Ph readily adds at carbon in the compounds HO_S3 (CHCH₂)(CO)₁₀, HO_S3(CCPh)(CO)₁₀ and O_S3 (CHCH)(CO)₁₀ to give zwitterionic 1:1 adducts; the addition to the vinyl compound is reversible and further reaction leads to O_S3 (CO)₁₀ (PMe₂Ph)₂ with ethylene displacement.     

Oxidation of disulfides with electrophilic halogenating reagents: concise methods for preparation of thiosulfonates and sulfonyl halides

The reaction of aromatic or benzylic disulfides with 2.5 equiv of Selectfluor™ in acetonitrile/water (10:1) at room temperature efficiently produced the corresponding thiosulfonates. Conversely, the reaction of disulfides with 6.5 equiv of Selectfluor™ or thiosulfonates with 4.5 equiv of Selectfluor™ in refluxing acetonitrile/water (10:1) provided sulfonyl fluorides in high yields. Accufluor™ and FP-T300™ are also effective in preparing sulfonyl fluorides from disulfides under the similar reaction conditions. Sulfonyl chlorides or sulfonyl bromides were effectively obtained from the reaction of disulfides with 6 equiv of either N-chlorosuccinimide or N-bromosuccinimide in acetonitrile/water (10:1) at room temperature. Some other electrophilic chlorinating or brominating reagents are also able to be used instead of N-chlorosuccinimide or N-bromosuccinimide for the syntheses of sulfonyl halides from disulfides. These reactions of disulfides with electrophilic halogenating reagents are convenient methods to prepare thiosulfonates and sulfonyl halides.     

Synthesis and characterization of modular polyphosphonate homopolymers and copolymers

Linear polyphosphonates with the generic formula –[P(Ph)(X)OR′O]_n– (X = S or Se) have been synthesized by polycondensations of P(Ph)(NEt₂)₂ and a diol (HOR′OH = 1,4-cyclohexanedimethanol, 1,4-benzenedimethanol, tetraethylene glycol, or 1,12-dodecanediol) followed by reaction with a chalcogen. Random copolymers have been synthesized by polycondensations of P(Ph)(NEt₂)₂ and mixture of two of the diols in a 2:1:1 mol ratio followed by reaction with a chalcogen. Block copolymers with the generic formula –[P(Ph)(X)OR′O]_{(x + 2)} –[P(Ph)(X)OR′O]_{(x + 3)}– (X = S or Se) have been synthesized by the polycondensations of Et₂N[P(Ph)(X)OR′O]_{(x + 2)}P(Ph)NEt₂ oligomers with HOR′O[P(Ph)(X)OR′O]_{(x + 3)}H oligomers followed by reaction with a chalcogen. The Et₂N[P(Ph)(X)OR′O]_{(x + 2)}P(Ph)NEt₂ oligomers are prepared by the reaction of an excess of P(Ph)(NEt₂)₂ with a diol while the HOR′O[P(Ph)(X)OR′O]_{(x + 3)}H oligomers are prepared by the reaction of P(Ph)(NEt₂)₂ with an excess of the diol. In each case the excess, x is the same and determines the average block sizes. All of the polymers were characterized using ¹H, ¹³C{¹H}, and ³¹P{¹H} NMR spectroscopy, TGA, DSC, and SEC. ³¹P{¹H} NMR spectroscopy demonstrates that the random and block copolymers have the expected arrangements of monomers and, in the case of block copolymers, verifies the block sizes. All polymers are thermally stable up to ~300°C, and the arrangements of monomers in the copolymers (block vs. random) affect their degradation temperatures and T_g profiles. The polymers have weight average MWs of up to 3.8 × 10⁴ Da.     

Acid-catalysed hydrolysis of N-sulphonyl sulphilimines—II

The basicity and the acid-catalysed hydrolysis of ph(R)SNTs and o-HC₆H₄(Me)SNTs sulphilimines have been studied by UV spectrophotometric and kinetic methods, respectively, in aqueous HClO₄ (1–10 M) and 1:1 (v/v) EtOH/H₂O-HClO₄ (0.5–6 M). Depending on the constitution of the substrates, sulphilimine hydrolysis can follow three different courses, according to rate-acidity profiles, Bunnett-Olsen's treatment, activation parameters and product analysis. Most typical for sulphilimines is S_N2 hydrolysis with S^IV-N bond cleavage. In this case the reaction starts with the nucleophilic addition of water and is promoted by acid-base catalysis. If a relatively stable carbenium ion can be formed from R group, an S_N1 reaction with S^IVC bond cleavage takes place. Sulphilimine with X = o-CO₂H due to neighbouring-group participation hydrolyses very rapidly via acyloxy-sulphurane and acyloxy-sulphonium ion intermediates with five-memembered ring (S_Ni reaction involving S^IVN bond cleavage).