Study of the N2 bΠu state via 1 + 1 multiphoton ionization

Medium-resolution spectra of the N₂ b¹Π_u-X¹Σ_g⁺ band system were recorded by 1 + 1 multiphoton ionization. In the spectra we found different linewidths for transitions to different vibrational levels in the b ¹Π_u state: Δν₀ = 0.50 ± 0.05 cm⁻¹, Δν₁ = 0.28 ± 0.02 cm⁻¹, Δν₂ = 0.65 ± 0.06 cm⁻¹, Δν₃ = 3.2 ± 0.5 cm⁻¹, Δν₄ = 0.60 ± 0.07 cm⁻¹, and Δν₅ = 0.28 ± 0.02 cm⁻¹. From these linewidths, predissociation lifetimes τ_ν were obtained: τ₀ = 16 ± 3 ps, τ₁ > 150 ps, τ₂ = 10 ± 2 ps, τ₃ = 1.6 ± 0.3 ps, τ₄ = 9 ± 2 ps, and τ₅ > 150 ps. Band origins and rotational constants for the b ¹Π_uν = 0 and 1 levels were determined for the ¹⁴N₂ and ¹⁴N¹⁵N molecules.     

The rovibrational analysis of the high-resolution IR spectrum of CD2HF below 1200 cm: an interacting tetrad of vibrational levels

The spectrum of CD₂HF was measured by high-resolution interferometric Fourier-transform IR (FTIR) spectroscopy (apodised instrumental band with:0.004 cm⁻¹ fwhm) between 800 and 1200 cm⁻¹ covering the four lowest fundamentals. A complete rotational analysis using a semi-automatic assignment procedure yields accurate band centres (ν₉: 912.2028 cm⁻¹, ν₆:964.4994 cm⁻¹, ν₅: 1050.5104 cm⁻¹, ν₄: 1093.8632 cm⁻¹) and a complete set of first-order Coriolis coupling constants. The most important couplings occur between ν₉ and ν₆ (ξ_a= 1.069 cm⁻¹, ξ_c= −0.3535 cm⁻¹) and between ν₅ and ν₄ (ξ_b= −0.80606 cm⁻¹). The analysis was guided by and compared with results from our ab initio calculations for Coriolis constants and transition moments using CADPAC at TZP/MP2 level.     

Observation and rovibrational analysis of the ν2 band of HCN–HCl

The high-resolution infrared absorption spectrum of an equilibrium mixture of HCN and HCl in a static gas long-path absorption cell is recorded in the 2500–2900 cm⁻¹ spectral region at 205 K. The spectrum shows rovibrational structure which has the typical appearance of a parallel band of a linear molecule and is assigned to the intramolecular H–Cl stretching vibration band ν₂ of the linear HCN–H³⁵Cl heterodimer. The rovibrational analysis of the band yield a band origin ν₀ of 2779.0968(12) cm⁻¹ together with a value for the upper-state rotational constant B′ of 0.067722(2) cm⁻¹. The observed red shift of 107 cm⁻¹ for the ν₂ band of HCN–H³⁵Cl relative to the H–Cl stretching vibration band of monomer H³⁵Cl is in excellent agreement with results from the MP2/6−311++G** level of theory. The value of the upper-state rotational constant shows that the intermolecular hydrogen bond shortens by 0.022 Å upon intramolecular vibrational excitation of the ν₂ mode.     

The ν3 infrared spectrum of the He---NH4 complex

The mid-infrared spectrum of the ionic complex He---NH₄⁺ has been recorded in the vicinity of the triply degenerate ν₃ (t₂) vibration of the free ammonium ion. Apart from a small blue shift (≈ 0.7 cm⁻¹), the spectrum of the complex closely resembles that of the monomer. Ab initio calculations predict a vertex-bound minimum structure with an intermolecular well depth D_e ≈ 150 cm⁻¹, a center-of-mass separation of R_e ≈ 3.17 Å and barriers for internal rotation less than 30 cm⁻¹.     

The electrolyte NRTL model and speciation approach as applied to multicomponent aqueous solutions of H2SO4, Fe2(SO4)3, MgSO4 and Al2(SO4)3 at 230–270 °C

This work presents chemical modeling of solubilities of metal sulfates in aqueous solutions of sulfuric acid at high temperatures. Calculations were compared with experimental solubility measurements of hematite (Fe₂O₃) in aqueous ternary and quaternary systems of H₂SO₄, MgSO₄ and Al₂(SO₄)₃ at high temperatures. A hybrid model of ion-association and electrolyte non-random two liquid (ENRTL) theory was employed to fit solubility data in three ternary systems H₂SO₄–MgSO₄–H₂O, H₂SO₄–Al₂(SO₄)₃–H₂O at 235–270 °C and H₂SO₄–Fe₂(SO₄)₃–H₂O at 150–270 °C. Employing the Aspen Plus™ property program, the electrolyte NRTL local composition model was used for calculating activity coefficients of the ions Al³⁺, Mg²⁺ Fe³⁺ and SO₄²⁻, HSO₄⁻, OH⁻, H₃O⁺, respectively, as well as molecular species. The solid phases were hydronium alunite (H₃O)Al₃(SO₄)₂(OH)₆, hematite Fe₂O₃ and magnesium sulfate monohydrate (MgSO₄)·H₂O which were employed as constraint precipitation solids in calculating the metal sulfate solubilities. A correlation for the equilibrium constants of the association reactions of complex species versus temperature was implemented. Based on the maximum-likelihood principle, the binary interaction energy parameters for the ionic species as well as the coefficients for equilibrium constants of the reactions were obtained simultaneously using the solubility data of the ternary systems. Following that, the solubilities of metal sulfates in the quaternary systems H₂SO₄–Fe₂(SO₄)₃–MgSO₄–H₂O, H₂SO₄–Fe₂(SO₄)₃–Al₂(SO₄)₃–H₂O at 250 °C and H₂SO₄–Al₂(SO₄)₃–MgSO₄–H₂O at 230–270 °C were predicted. The calculated results were in excellent agreement with the experimental data.     

Electron transfer in organometallic clusters : XI. Redox chemistry of M3(CO)12(M = Ru, Os) and PPh3 derivatives; mechanism of catalysed nucleophilic substitution

The generality of a two-electron reduction process involving an mechanism has been established for M₃(CO)₁₂ and M₃(CO)₁₂−n(PPh₃)_n (M = Ru, Os) clusters in all solvents. Detailed coulometric and spectral studies in CH₂Cl₂ provide strong evidence for the formation of an ‘opened’ M₃(CO)₁₂²⁻ species the triangulo radical anions M₃(CO)₁₂^−· having a half-life of < 10⁻⁶ s in CH₂Cl₂. However, the electrochemical response is sensitive to the presence of water and is concentration dependent. An electrochemical response for “opened” M₃(CO)₁₂²⁻ is only detected at low concentrations < 5 × 10⁻⁴ mol dm⁻³ and under drybox conditions. The electroactive species ground at higher concentrations and in the presence of water M₃(CO)₁₁²⁻ and M₆(CO)₁₈²⁻ were confirmed by a study of the electrochemistry of these anions in CH₂Cl₂; HM₃(CO)₁₁⁻ is not a product. The couple [M₆(CO)₁₈]^−/2− is chemically reversible under certain conditions but oxidation of HM₃(CO)₁₁⁻ is chemically irreversible. Different electrochemical behaviour for Ru₃(CO)₁₂ is found when [PPN][X] (X = OAc⁻, Cl⁻) salts are supporting electrolytes. In these solutions formation of the ultimate electroactive species [μ-C(O)XRu₃(CO)₁₀]⁻ at the electrode is stopped under CO or at low temperatures but Ru₃(CO)₁₂^−· is still trapped by reversible attack by X presumably as [η¹-C(O)XRu₃(CO)₁₁]⁻. It is shown that electrode-initiated electron catalysed substitution of M₃(CO)₁₂ only takes place on the electrochemical timescale when M = Ru, but it is slow, inefficient and non-selective, whereas BPK-initiated nucleophilic substitution of Ru₃(CO)₁₂ is only specific and fast in ether solvents particulary THF. Metal---metal bond cleavage is the most important influence on the rate and specificity of catalytic substitution by electron or [PPN]-initiation. The redox chemistry of M₃(CO)₁₂ clusters (M = Fe, Ru, Os) is a consequence of the relative rates of metal---metal bond dissociation, metal-metal bond strength and ligand dissociation and in many aspects resembles their photochemistry.     

A theoretical investigation of C5

Large-scale CEPA-1 calculations have been carried out for linear C₅, a molecule of substantial interest to combustion processes and astrochemistry. The equilibrium bond lengths are predicted to be 1.289 Å (outer CC bond) and 1.283 Å (inner CC bond), with an accuracy of 0.002 Å. The calculated ν₃ band origins of 2161 cm⁻¹ (105 CGTO basis) and 2137 cm⁻¹ (150 CGTO basis) are in good agreement with the experimental value of 2169 cm⁻¹. This band has an extremely large transition moment of 0.74 D. The less intense stretching fundamental ν₄ (μ=0.18 D) is predicted to occur at 1478 ± 10 cm⁻¹. Predictions for the totally symmetric stretching and the bending vibrational frequencies (in cm⁻¹) are 2008 (1σ_g⁺), 792 (2σ_g⁺), 570 (1π_u), 209 (1π_g) and 119 (2π_u).     

Novel iodoammonium cations: Synthesis and characterization of o-C6H4(NH2)2IX (X = I, AsF6, AlI4)

The new iodoammonium salts o-C₆H₄(NH₂)₂I⁺I⁻ (1) and o-C₆H₄(NH₂)₂I⁺ AsF₆⁻ (2) were prepared by reaction of o-phenylene diamine with I₂ or I₃⁺AsF₆⁻, respectively. Compound 1 reacts with AlI₃ yielding quantitatively the corresponding tetraiodoaluminate o-C₆H₄(NH₂)₂I⁺AlI₄⁻ (3). The species were characterized by chemical analysis, vibrational (IR and Raman) and temperature-dependent ¹H NMR spectropscopy. Direct evidence for a N---I bond was found in the Raman spectra of 1, 2 and 3 (ν(NI) = 599–600 cm⁻¹).     

Ion chromatography of organic-rich natural waters from peatlands: I. Cl, NO2, Br, NO3, HPO4, SO4 and oxalate

Organic-rich natural waters from peat bogs in continental (Switzerland) and maritime (Shetland Islands, Scotland) areas were analysed for Cl⁻, NO₂⁻, Br⁻, NO₃⁻, HPO₄²⁻, SO₄²⁻ and oxalate using ion chromatography. These anions can be determined simultaneously in the surface and pore water samples from the continental bogs using a 250-μl injection loop. Using this loop, the detection limits were ca. 5 ng/g for the monovalent anions and SO₄²⁻ and 10 ng/g for HPO₄²⁻ and oxalate. An organics-removal cartridge (Dionex OnGuard P) was used to remove humic materials. These cartridges did not significantly affect the measured concentrations of anions in blind standards. Analyses of deionized water treated with these cartridges are not significantly different from those for untreated deionized water. For the maritime bogs, the relatively high concentrations of Cl⁻ (more than 100μ/g in many samples) and SO₄²⁻ (up to 50 μg/g) require two separate determinations for complete analyses. A 10-μl injection loop was used to determine Cl⁻, Br⁻ and SO₄²⁻. A 250-μl injection loop was used to measure NO₂⁻, NO₃⁻, HPO ₄²⁻ and oxalate. In each instance a Dionex OnGuard P cartridge was used to remove humic materials. In addition, a chloride-removal cartridge (Dionex OnGuard AG) was used to remove Cl⁻ when the larger injection loop was used. This cartridge has no significant effect on the measurement of HPO_4-²⁻ at concentrations of 20 ng/g. In each of the bog water chromatograms there were usually a number of unknown peaks. These are probably due mainly to organic anions.     

Syntheses and X-ray crystal structures of [Co(η-CO3)(NH3)4](NO3)·0.5H2O and [(NH3)3Co(μ-OH)2(μ-CO3)Co(NH3)3][NO3]2·H2O

[Co(η²-CO₃)(NH₃)₄](NO₃)·0.5H₂O and [(NH₃)₃Co(μ-OH)₂(μ-CO₃)Co(NH₃)₃][NO₃]₂·H₂O were prepared by prolonged aerial oxidation of a solution of Co(NO₃)₂·6H₂O and ammonium carbonate in aqueous ammonia. The formation of these side products highlights the richness of the chemistry of these systems and the possibility of by products if methods are not strictly adhered to. The X-ray crystal structures of [Co(η²-CO₃)(NH₃)₄][NO₃]·0.5H₂O and [(NH₃)₃Co(μ-OH)₂(μ-CO₃)Co(NH₃)₃][NO₃]₂·H₂O reveal a monomeric octahedral cobalt center with η²-bound CO₃²⁻ in the former, while the latter consists of a dimeric array where the two cobalt centers are bridged by two OH⁻ and one μ₂-CO₃²⁻ groups with three terminal NH₃ ligands for each Co center. In both complexes extensive hydrogen bonding interactions are evident.     

Das Reaktionsverhalten von Cp2NbCl2 gegenüber WF6—Struktur von [Cp2NbCl2]4[WF6]2[WCl6]

The oxidation of Cp₂NbCl₂ with pure WF₆ in SO₂ solution yielded the cationic metallocene species [Cp₂NbCl₂]⁺[WF₆]⁻ essentially in quantitative yield. The same reaction carried out in the presence of either equimolar amounts or a two-fold excess of HCN led to the preparation of the new niobocenium salt [Cp₂NbCl₂]₄⁺[WF₆]²⁻ which was studied by single crystal X-ray diffraction. This compound represents the first example of a structurally characterized metallocene-WF₆⁻ complex, and crystallizes in the tetragonal system: space group, P4₁2₁2(No. 92), a = 11.083(8) Å, c = 48.285 (9) Å; Z = 8; R = 0.0759, R_W = 0.0841. ab]Die Oxidation von Cp₂NbCl₂ mit reinem WF₆ führt in SO₂-Lösung zur Synthese von [Cp₂NbCl₂ ]⁺[WF₆]⁻ in nahezu quantitativer Ausbeute. Die analoge Reaktion führt unter Anwesenheit der äquimolaren Menge oder eines zweifachen Überschusses an HCN zur Ausbildung des Niobocenium-Komplexsalzes [Cp₂NbCl₂]₄⁺ [WF₆]₂⁻[WCl₆]²⁻, von dem eine Röntgenstrukturanalyse angefertigt wurde. Diese Verbindung repräsentiert den ersten structurell charakterisierten Vertreter eines Metallocen-WF₆⁻-Komplexes und kristallisiert im tetragonalen System: Raumgruppe P4₁2₁2 (Nr. 92), a = 11.083(8) Å, c = 48.285(9) Å; Z = 8; R = 0.0759, R_W = 0.0841. kw]Niobium; X-ray diffraction; Oxidation; Metallocenes     

Synthesis, characterization and reactivity of some novel dinuclear mixed-ligand peroxouranium(VI) complexes

Novel anionic dinuclear mixed-ligand peroxo complexes of the type [(UO₂)₂(O₂)₃L(H₂O)₂]³⁻ (L = Histidinate, aspartate, salicylate, Imidazolate and glutamate) have been synthesized from the interaction of uranyl ion (UO₂²⁺) with peroxide (O₂²⁻) in the presence of the respective coligand (L) at pH 9–10. The sparingly soluble complexes were characterized by elemental analyses, FT-IR, laser Raman (LR) and UV-vis spectroscopy and solution electrical conductance measurements. Based on these studies, a double bridged dinuclear structure involving one peroxo and the mixed ligand L (via-COO⁻) has been tentatively proposed. Infra-red coupled with LR spectra evidenced structurally different metal bound peroxides (ν² and σ:σ). An aqueous solution of the salicylate and aspartate complexes have been shown to convert triphenylphosphine (PPh₃), cyclohexene, styrene and SO₂ to the corresponding OPPh₃, 1,2 cyclohexanediol, phenylethyleneglycol and SO₄²⁻, respectively.     

SO_4~(2-)功能化处理对Fe_2O_3催化剂上氨选择性催化还原NO_x性能的促进机理研究

采用沉淀法制备了Fe(OH)_3和Fe_2O_3。通过硫酸化处理得到SO_4~(2-)/Fe(OH)_3和SO_4~(2-)/Fe_2O_3两种催化剂,并将其应用于氨选择性催化还原NO_x(NH_3-SCR)反应,研究了SO_4~(2-)功能化处理对Fe_2O_3催化剂上NH_3-SCR脱硝性能的促进机理。结果表明,与纯的Fe_2O_3相比,硫酸化处理得到的催化剂上SCR活性得到显著提升;其中,SO_4~(2-)/Fe(OH)_3表现出更加优异的催化性能,在250-450℃时NO_x转化率高于80%,且具有优异的稳定性和抗H_2O+SO_2性能。XRD、Raman、TG、FT-IR、H_2-TPR、NH_3-TPD和in situ DRIFTS等表征结果显示,硫酸功能化处理能抑制Fe_2O_3的晶粒生长,同时SO_4~(2-)与Fe~(3+)结合形成硫酸盐复合物,提高了催化剂表面酸性位点的数量和酸强度,抑制了Fe_2O_3上的氨氧化反应,从而提高了其脱硝催化性能。     

Oxygen abstraction from tetrahydrofuran by molybdenum-iodide complexes. X-ray molecular structure of [Mo2(μ-O)(μ-I)(μ-O2CCH3)I2(THF)4][MoOI4(THF)] (THF = tetrahydrofuran)

The interaction between Mo₂(O₂CCH₃)₄, Me₃SiI and I₂ in THF resulted in oxygen abstraction from the solvent and formation of [Mo₂(μ-O)(μ-I)(μ-O₂CCH₃) I₂(THF)₄]⁺[MoOI₄(THF)]⁻ and I---(CH₂)₄---I. The molybdenum complex has been characterized by X-ray diffractometry. Crystal data: triclinic, space group P , a = 13.827(3) Å; b = 15.803(7) Å; c = 9.950(3) Å; = 93.34(4)°; β = 102.40(2)°; γ = 90.09(2)°; V = 2120(2) Å₃; Z = 2; d_calc = 2.559 g cm⁻³; R = 0.0476 (R_w = 0.0613) for 370 parameters and 3938 data with F₀²> 3σ(F₀²). The metal-metal distance in the cation is 2.527(2) Å and indicates a strong interaction. The magnetic behavior is consistent with the assignment of one unpaired electron to the Mo₂⁷⁺ core of the cation and one to the d¹ Mo(V) center of the anion. The interaction between Mo(CO)₆ and I₂ in THF also results in the formation of 1,4-diiodobutane.     

The infrared spectrum of gaseous Sb4O6

The vibrational spectrum of Sb₄O₆ in the gas phase has been measured at 1000 K by high-temperature infrared spectroscopy. The four infrared-active absorption bands were observed at ν₇ = 785.0 cm¹, ν₈ = 176.2 cm⁻¹, ν₉ = 292.4 cm⁻¹ and ν₁₀ = 415.6 cm⁻¹. By combining these results with data on the molecular geometry and the infrared-inactive modes, as reported in the literature, the thermodynamic functions of Sb₄O₆ have been calculated.     

The vibration-rotation spectrum and anharmonic potential of H3

Some qualitative effects of anharmonicity on the spectra of H₃⁺ and D₃⁺ between low vibrational levels are described. Using large-basis vibration-rotation calculations with a Morse-based discrete variable representation for the vibrations and a symmetric-top basis for the rotations, new spectra of H₃⁺ and D₃⁺ have been assigned. This procedure was assisted by adjusting eight coefficients for H₃⁺ and six coefficients for D₃⁺ in the Meyer-Botschwina-Burton ab initio potential function, and eventually 621 new and old lines of H₃⁺ to levels up to 3ν₂ and 529 new and old lines of D₃⁺ to levels up to 2ν₂ have been fitted with standard deviations of 0.118 and 0.059 cm⁻¹, respectively. An attempt is made to compare five different potential energy functions for the H₃⁺ system, two ab initio and three adjusted to fit spectra of H₃⁺ or D₃⁺, by expanding them by the same procedure in the same variables. For extension of the present work to higher vibrational levels, more accurate boundary behaviour at linear configurations will be required, and some aspects of the use of hyperspherical coordinates are discussed.     

Synthesis and characterisation of the methylene-inserted mixed-chalcogenide compounds Fe2(CO)6(μ-SeCH2Te) and Fe2(CO)6(μ-SCH2Te)

The methylene-bridged, mixed-chalogen compounds Fe₂(CO)₆(μ-SeCH₂Te) (1) and Fe₂(CO)₆(μ-SCH₂Te) (3) have been synthesised from the room temperature reaction of diazomethane with Fe₂(CO)₆(μ-SeTe) and Fe₂(CO)₆(μ-STe), respectively. Compounds 1 and 3 have been characterised by IR, ¹H, ¹³C, ⁷⁷Se and ¹²⁵Te NMR spectroscopy. The structure of 1 has been elucidated by X-ray crystallography. The crystalsare monoclinic,space group P2₁/n, A = 6.695(2), B = 13.993(5), C = 14.007(4)Å, β = 103.03(2)°, V = 1278(7) ų, Z = 4, D_c = 2.599 g cm⁻³ and R = 0.030 (R_w = 0.047).     

Vibration-rotation spectra of C containing acetylene: anharmonic resonances

High resolution vibration-rotation spectra of ¹³C₂H₂ were recorded in a number of regions from 2000 to 5200 cm⁻¹ at Doppler or pressure limited resolution. In these spectral ranges cold and hot bands involving the bending-stretching combination levels have been analyzed up to high J values. Anharmonic quartic resonances for the combination levels ν₁ + mν₄ + nν₅, ν₂ + mν₄ + (n + 2) ν₅ and ν₃ + (m − 1) ν₄ + (n + 1) ν₅ have been studied, and the l-type resonances within each polyad have been explicitly taken into account in the analysis of the data. The least-squares refinement provides deperturbed values for band origins and rotational constants, obtained by fitting rotation lines only up to J ≈ 20 with root mean square errors of ≈ 0.0003 cm⁻¹. The band origins allowed us to determine a number of the anharmonicity constants x_ij⁰.     

Spectres infrarouges et structure des anions 2-methylallyle, CH3-C(CH2)2- et triméthylèneméthane, C(CH2)3

The infrared spectra of solid samples of C₄H₇K and C₄D₇K have been investigated in the 4000 to 30 cm⁻¹ range. A complete assignment of intramolecular fundamentals of C₄H₇⁻ and C₄D₇⁻ ions and of potassium-allyl vibrations is proposed and the intramolecular force constants are calculated. The C(CH₂)₃²⁻ anion has been identified spectroscopically. Structures of C₃H₅⁻, C₄H₇⁻ and C(CH₃)₃²⁻ are discussed and compared with those optimised by the MINDO/3 method.     

Coordination geometry of chromium(VI) species. The first example of cis-bridging chromate ions in helically structured catena(μ-CrO4-O,O′)[Ni(HIm)3H2O]

Nickel(II) chromate complex with imidazole (HIm) was isolated from the [Ni²⁺–HIm–CrO₄²⁻] system in various experimental conditions, i.e. reagent molar ratios and nickel(II) salts. The catena(μ-CrO₄-O,O′)[Ni(HIm)₃H₂O] (1) crystallizes in monoclinic crystal system—space group P2₁/n with cell parameters: a=11.784(2), b=8.899(2), c=13.934(3) (Å), β=95.19(3) (°). The unit cell contains two independent helixes, left- and right-handed, stabilized by intrahelical and interhelical hydrogen bonds (HB) and π–π interactions. The cis coordination of the CrO₄²⁻ anions and the HB systems appeared to be the main determinants of the helical architecture. To the best of our knowledge the cis-chromate coordination was observed for the first time. The cis coordination causes the distortion of the nickel octahedron, which was analysed by 4 K single crystal electronic spectra with D_4h symmetry approximation (gaussian resolution and crystal field parameters). This symmetry was also confirmed with the polarised electronic spectra. The magnetic properties of the complex suggest the occurrence of weak intrachain antiferromagnetic interactions between the magnetic Ni^II center. The computational DFT studies of complex 1 assuming three possible isomers mer[(HIm)₃]–cis[(CrO₄²⁻)₂], mer–trans and fac–cis suggested that the main contribution to the stability of 1 might have interhelical and intrahelical hydrogen bonds.