1,2,4-三氮杂苯-(H2O)n复合物氢键相互作用的密度泛函理论研究

用密度泛函理论方法在B3LYP/6-31++G**水平上对1,2,4-三氮杂苯-(H₂O)_n (n＝1, 2, 3)氢键复合物的基态进行了结构优化和能量计算, 结果表明复合物之间存在较强的氢键作用, 所有稳定复合物结构中形成一个N…H—O氢键并终止于弱O…H—C氢键的氢键水链的构型最稳定. 同时, 用含时密度泛函理论方法(TD-DFT)在TD-B3LYP/6-31++G**水平上计算了1,2,4-三氮杂苯单体及其氢键复合物的单重态第一¹(n, π^*)垂直激发能.     

二氮杂苯－水氢键复合物结构性质的理论研究

使用密度泛函理论B3LYP方法和从头算MP2方法优化二氮杂苯－水复合物的基态氢键结构和相互作用能的计算。结果表明，邻二氮杂苯－水，间二氮杂苯－水，对二氮杂苯－水复合物具有强的N∙∙∙H─O氢键相互作用，经基组重叠误差和零点能校正后的氢键相互作用能分别为-20.99, -16.73 和-15.31 kJ/mol，氢键的形成使水的H─O对称伸缩振动频率明显红移（减小）。自然键轨道NBO分析显示，氢键的形成，分子间电荷转移分别为0.0316 e，0.0255 e 和0.0265 e。另外，使用含时密度泛函理论TD-DFT (TD-B3LYP)方法计算了二氮杂苯单体与氢键复合物的第一单重态(n, p^*)激发态的垂直激发能。     

邻二氮杂苯-水复合物的氢键结构与性质

用密度泛函理论B3LYP方法和MP2方法对邻二氮杂苯-水复合物基态的氢键结构与相互作用能进行了理论计算,结果表明复合物之间存在较强的氢键N…H－O.在复合物中,水的H－O对称伸缩振动频率明显红移.同时,使用含时密度泛函理论方法计算了邻二氮杂苯单体及复合物的低占据1(n,π*) 和1(π,π*) 态的垂直激发能,计算结果与实验值吻合较好.     

1,2,3-三氮杂苯-水簇复合物氢键结构与性质的理论研究

在B3LYP/6-31 G**水平上对1,2,3-三氮杂苯和水形成1∶1,1∶2和1∶3复合物的基态氢键结构进行几何优化和性质计算,结果表明复合物之间存在较强的氢键作用。氢键的形成使水分子中H-O键振动频率减小(红移)。NBO分析表明,最稳定的1∶1,1∶2和1∶3复合物发生分子间电荷转移总量分别为0.0222e,0.0261e和0.0273e。     

三氮杂苯-水氢键复合物的结构与性质

使用密度泛函理论B3LYP方法对三氮杂苯-水氢键复合物的基态结构与相互作用进行理论研究. 结果表明1,2,3-三氮杂苯-水, 1,2,4-三氮杂苯-水和1,3,5-三氮杂苯-水复合物基态分别具有Cs, Cs和C₁对称性和强的氢键相互作用, 经基组重叠误差和零点振动能校正后的相互作用能分别为–17.83, –17.38和–13.55 kJ/mol. 三氮杂苯-水复合物中, N∙∙∙H—O氢键的形成使水的H—O对称伸缩振动频率明显红移. 同时使用含时密度泛函理论研究了三氮杂苯单体及其与水形成的氢键复合物的第一¹(n, π^*)激发态的垂直激发能.     

s-四嗪-水簇复合物的理论研究

用量子化学B3LYP方法和6-31＋＋G**基函数研究了s-四嗪-水簇复合物基态分子间相互作用, 并进行了构型优化和频率计算, 分别得到无虚频稳定的s-四嗪-(水)₂复合物、s-四嗪-(水)₃复合物和s-四嗪-(水)₄复合物6个、9个和12个. 复合物存在较强的氢键作用, 复合物结构中形成一个N…H—O氢键并终止于O…H—C氢键的氢键水链构型最稳定. 经基组重叠误差和零点振动能校正后, 最稳定的1∶2, 1∶3和1∶4(摩尔比)复合物的结合能分别是41.35, 70.9和 94.61 kJ/mol. 振动分析显示氢键的形成使复合物中水分子H—O键对称伸缩振动频率减小(红移). 研究表明N…H键越短, N…H—O键角越接近直线, 稳定化能越大, 氢键作用越强. 同时, 用含时密度泛函理论方法在TD-B3LYP/6-31＋＋G**水平计算了s-四嗪单体及其氢键复合物的第一¹(n, p*)激发态的垂直激发能.     

4-羟甲基吡啶－水红移氢键的密度泛函理论研究

使用密度泛函理论B3LYP方法和6-311++G**基函数对4-羟甲基吡啶与水形成的1:1和1:2（摩尔比）氢键复合物进行了理论计算研究,分别得到稳定的4-羟甲基吡啶－H₂O和4-羟甲基吡啶－(H₂O)₂氢键复合物3个和8个。经基组重叠误差和零点振动能校正后,最稳定的1:1和1:2氢键复合物的相互作用能分别为-20.536和-44.246 kJ/mol。振动分析显示O-H···N(O)氢键的形成使复合物中O-H键对称伸缩振动频率红移(减小)。自然键轨道分析表明,4-羟甲基吡啶与水形成最稳定的1:1和1:2氢键复合物时,分子间电荷转移分别为0.02642 e 和0.03813 e 。含时密度泛函理论TD-B3LYP/ 6-311++G**计算显示,相对于4-羟甲基吡啶单体分子,氢键H-OH···N和H-OH···OH的形成分别使最大吸收光谱波长兰移8~16纳米和红移4~11纳米。     

2-羟基吡啶与水氢键作用的理论研究

本文采用量子化学的Hatree-Fock方法和密度泛函理论(DFT)的B3LYP方法,在6-31G(d)水平上,研究了2-羟基吡啶分子(Hy)及其酮式互变异构体2(1H)-吡啶酮(Py)与水的相互作用。考察它们之间在形成Hy…H2O,Py…H2O,Hy…Hy,Py…Py和Hy…Py等复合物前后的能量变化和分子结构参数变化特点。计算结果表明,在这些复合物中都形成了较强的氢键作用,在水合物中,Py与水形成复合物时能量降低较多,与实验结果一致。经过零点振动能(ZPVE)和基组叠加误差(BSSE)校正后的复合物离解能分别为38.3,40.8,73.0,82.7和71.1 kJ/mol(B3LYP/6-31G(d)),水合物的离解能远小于二聚体复合物,而酮式结构的二聚体的离解能最大。     

线型碳链PC2nP的结构和电子光谱的密度泛函理论研究

应用密度泛函理论,在B3LYP/6-31G**和B3LYP/6-311G**水平上优化得到了线型簇合物PC2nP(n=1-10)的基态平衡几何构型,计算了它们的谐振动频率.在基态平衡构型下,利用含时密度泛函理论,计算得到了簇合物PC2nP(n=1-10)的垂直激发能和相应的振子强度,导出了激发能与体系大小n的解析关系式.     

Al6(OH)18(H2O)6的结构及成键方位的从头算及密度泛函分析Ⅱ

用RHF法6-31G、6-31G*、6-31G**水平的量子化学从头算及RB3LYP/6-31G、B3LYP/6-31G*,B3LYP/6-31G**水平的密度泛函方法,采用SCRF=Dipole溶剂模型,计算了三水铝石有利生长基元最优结构Al6(OH)18(H2O)6的总能量、布居数、原子静电荷等.计算结果表明,桥联OH基团更易成键,Al6(OH)18(H2O)6较为有利的成键方位是桥联OH基团方位.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.