用含螺环原碳酸酯的预聚物改性环氧树脂的粘接性能

用含螺环原碳酸酯的预聚物改性环氧树脂的粘接性能白如科，王长松，齐龙武，潘才元（中国科学技术大学材料科学与工程系，合肥，２３００２６）关键词螺环原碳酸酯，齐聚物，改性环氧树脂，粘接性能Ｂａｉｌｅｙ［１］发现双螺环化合物在双开环聚合反应时，伴随着体积膨胀...     

螺环单体的合成、聚合及与环氧树脂的固化反应

合成了新螺环原碳酸酯单体：３，９－二（对甲氧基苄基）－１，５，７，１１－四氧杂螺环［５，５］十一烷．以ＢＦ３·ＯＥｔ２为催化剂，实现了其阳离子聚合．聚合产物的１ＨＮＭＲ、１３ＣＮＭＲ、ＩＲ及元素分析均表明发生了双开环聚合反应．探讨了其聚合历程．用ＤＳＣ和ＩＲ跟踪环氧树脂及其与螺环单体混合后的固化反应过程，研究了固化剂、反应条件对固化反应的影响     

环单体的合成,聚合及与环氧树脂的固化反应

合成了新螺环原碳酸酯单体：３，９－二（对甲氧基苄基）－１，５，７，１１－四氧杂螺环［５，５］十一烷。以ＢＦ３·ＯＥｔ２为催化剂，实现了其阳离子聚合。聚合产物的＾１Ｈ ＮＭＲ、＾１３Ｃ ＮＭＲ、ＩＲ及元素分析均表明发生了双开环聚合反应。探讨了其聚合历程。用ＤＳＣ和ＩＲ跟踪环氧树脂及其与螺环单体混合后的固化反应过程，研究了固化剂、反应条件对固化反应的影响。     

螺环原酸酯类膨胀化合物研究进展

膨胀单体的特点是在聚合过程中没有体积收缩,甚至会产生体积膨胀,这种特殊的性能使其具有广阔的应用前景。目前可用作膨胀单体的螺环化合物主要有螺环原碳酸酯(SOC)、螺环原酸酯(SOE)和双环原酸酯(BOE)。螺环原酸酯(SOE)是最早发现能进行膨胀聚合反应的一类化合物。本文介绍了螺环原酸酯类化合物的发现、合成方法、聚合反应及应用的研究进展,并提出未来的发展前景。     

含螺环原碳酸酯的预聚物对环氧树脂的改性研究

Bailey发现螺环原酸酯和螺环原碳酸酯等单体在阳离子引发剂作用下进行双开环聚合反应时，伴随着体积膨胀［‘j．这一现象引起了高分子材料学家的极大兴趣，因为树脂固化时产生体积收缩，会使树脂材料内部产生收缩应力，是导致材料力学性能下降，使用寿命降低的主要原因之一．例如，用不饱和螺环原碳酸酯改性的某种补牙材料与牙的粘接力比不含螺环原碳酸酯的大一倍，并且改善了冲击强度而不改变模量．更为重要的是，由于体积稍微膨胀，补牙材料与牙齿间无缝隙，从而消除了在缝隙中繁殖细菌的可能性，达到既结实又卫生的目的【‘］．利用螺环…     

3，9－二羟乙基－3＇，9＇－二苯甲基－1，5，7，11－四氧杂螺环［5，5］十一烷的合成和聚合反应

从两二酸二乙酯、氯乙酸乙酯和氯苄出发，经ＬｉＡｌＨ４还原，合成新的二元醇，进而合成新的螺环化合物：３，９－二羟乙基－３＇，９＇－二苯甲基－１，５，７，１１－四氧杂螺［５，５］十一烷．该化合物的结构由它的氢和碳－１３核磁共振谱、红外光谱和元素分析得到证明．该单体在三氟化硼乙醚络合物的作用下进行开环聚合反应．由于环上四个取代基的稳定作用，聚合物的收率比较低（产率１０％左右）．通过对聚合物的结构分析，提出了这一单体的阳离子开环聚合反应机理．对随聚合温度升高，聚合物中酯基／苯基的克分子比降低，以及本体聚合时得到交联聚合物等一系列现象作了探讨．     

环状碳酸酯低聚物的合成及其开环聚合的研究

环状碳酸酯低聚物的合成及其开环聚合的研究陈雨萍魏玮李革（中国科学院化学研究所工程塑料国家重点实验室北京１０００８０）关键词环状碳酸酯低聚物，聚碳酸酯，开环聚合环状单体的开环聚合在合成高聚物方面具有突出的优点，即在聚合过程中没有副产物、热效应低、聚合...     

三亚甲基环碳酸酯及2,2-二甲基三亚甲基环碳酸酯开环均聚合*

生物降解聚合物聚三亚甲基环碳酸酯（PTMC）及聚2,2-二甲基三亚甲基环碳酸酯（PDTC）在药物控释载体及其它生物医学技术领域有着良好的应用前景。与脂肪族聚酯不同,PTMC、PDTC降解时,不会产生有害的酸性化合物。PTMC、PDTC主要由三亚甲基环碳酸酯（TMC）及2,2-二甲基三亚甲基环碳酸酯（DTC）开环均聚合制备。本文总结了催化TMC、DTC开环均聚合的不同催化剂及其聚合机理,综述了近年来国内外在TMC、DTC均聚合催化剂开发上的研究进展,并对生物相容性催化剂如稀土催化剂、Ca、Mg、Zn、Fe催化剂以及酶催化剂催化TMC、DTC开环聚合的优缺点进行了比较。     

3,9—二（对甲氧基苄基）—1,5,7,11—四氧杂螺环[5.5]十一烷的合成及体…

合成了新型膨胀单体３，９－二（对甲氧基苄基）－１，５，７，１１－四氧杂螺环「５．５」十一烷。以ＢＦ３．ＯＥｔ２为催化剂，在二氯乙烷中实现了其双开环阳离子聚合。此单体对热固体脂进行改性。     

新型螺环单体的合成和自由基聚合反应的研究

新型螺环单体的合成和自由基聚合反应的研究王宏鲁剑涛冯品珍（中国科学技术大学研究生院化学部北京１０００３９）关键词自由基聚合，新单体合成，螺环单体，自由基共聚虽然离子型开环聚合早已为人熟知，但是自由基开环聚合反应的研究和应用开发还刚刚起步．...     

RING-OPENING POLYMERIZATION OF TRIMETHYLENE CARBONATE BY CALIX[8]ARENE-NEODYMIUM*

Ring-opening polymerization of trimethylene carbonate (TMC) with a rare earth calixarene compound as catalysthas been studied for the first time. The effect of TMC/Nd (molar ratio) and polymerization conditions were investigated indetail. It was found that calix[8]arene-neodymium is a highly effective catalyst for the bulk polymerization of TMC and giveshigh molecular weight (M_v = 60,000) polymer. The optimum conditions of TMC polymerization were found to be asfollows:TMC/Nd (molar ratio) = 2,000, 80℃, 16 h. The polymers were characterized by NMR, GPC and DSC. Studying themechanism by NMR showed that the polymerization of TMC catalyzed by calix[8]arene-neodymium proceeds via a cationicmechanism.     

端基含葡氨糖衍生物的聚乳酸的合成与表征

端基含葡氨糖衍生物的聚乳酸的合成与表征张国栋冯新德（北京大学高分子科学与工程系北京１００８７１）顾忠伟（国家计生委科研所药化室北京１０００８１）关键词壳多糖，聚乳酸，生物医用材料，化学修饰自从发现高分子量聚乳酸在人体内能够降解，并把这类材料引入...     

富勒烯衍生物引发的富勒烯末端封端聚己内酯的合成

利用带活性羟基的N-取代3,4-富勒烯吡咯烷作为引发剂,引发ε-己内酯开环聚合,制备了一种具有新型结构的富勒烯末端封端聚己内酯,通过核磁共振(1H NMR,13C NMR)、红外光谱(FTIR)和基质辅助激光解吸电离飞行时间质谱(MALDI-TOF-MS)等手段对产物进行了结构表征,并用热重(TG)分析和差示扫描量热(DSC)分析的方法进行了热学性能分析.结果表明,与聚己内酯相比产物热稳定性增加.     

Group‐transfer polymerization of cyclic trimethylsilyl dienolate as a new monomer

This communication reports the group‐transfer polymerization of a cyclic trimethylsilyl dienolate, 2‐(trimethylsilyloxy)furan ( 1 ), initiated with benzaldehyde. The polymerization proceeded in the presence of a tetrabutylammonium salt as the catalyst in THF solvent at 0–50°C. The product was isolated as an ethyl acetate insoluble fraction after acidic work‐up. The structure of the product polymer was determined by means of ¹H NMR, ¹³C NMR, and IR spectroscopy to be polylactone 3 . The mechanism of the polymerization can be explained by a Michael‐type addition of 1 onto the propagating end.     

Studies on the Self-condensing Vinyl Living Radical Polymerization of a Novel Acrylate Inimer

IntroductionDendrimers represent a class of macro-molecules with perfectly and regularly branchedstructures.However,the synthesis ofdendrimers isnot trivial and requires multistep synthesis,theircommercial development has been limited only to afew structures[1— 3 ] . Hyperbranched macro-molecules,which posses less perfectly branchedstructures,have some similar properties to those ofdendrimers,but they can be prepared in a singlestep and one- pot reaction,so many macromolecularresearchershavef…     

Vine-twining polymerization: amylose twines around polyethers to form amylose-polyether inclusion complexes

In this paper, we describe a new polymerization manner termed as "vine-twining polymerization" to produce amylose-polymer inclusion complexes. The polymerization was achieved by an enzymatic polymerization of alpha-D-glucose-1-phosphate monomer catalyzed by phosphorylase in the presence of polyTHF as a guest polymer. The structure of the product was determined by X-ray powder diffraction and (1)H NMR measurements to be the inclusion complex. The formation process of the inclusion complexes during the polymerization was also evaluated. Furthermore, the formation of the inclusion complexes by this polymerization method by using polyTHFs with various M(n)s and end groups, as well as other polyethers as the guest polymers, was examined.     

Synthesis of a dibenzylchitin-type polysaccharide by acid-catalyzed polymerization

This paper describes the polymerization of 2-methyl-(3,6-di-O-benzyl- 1,2-dideoxy-α-D -glucopyrano)-[2,1-d]-2-oxazoline ( 1 ) with an acid catalyst. The polymerization proceeds involving stereoregular glycosylation to give polysaccharide 2 . The polymer structure, 2-acetamido-3,6-di-O-benzyl-2-deoxy-(l→4)-β-D -glucopyranan was determined by means of ¹H NMR, ¹³C NMR, and IR spectra as well as elemental analysis. The molecular weight was at most 4900 (degree of polymerization ≈ 13).     

聚硅芳撑硅氧烷的研究(Ⅱ)——聚四甲基对硅苯撑硅氧烷的合成

本文以具有硅苯撑结构的环状有机硅氧烷--十二甲基环三对硅笨撑硅氧烷为单体,用开环聚合方法合成了聚四甲基对硅苯撑硅氧烷.选用硅醇钾催化,环单体有较高的开环聚合活性.通过IR、¹H NMR和¹³C NMR等证明了聚合物的化学结构.聚合物在空气中的热失重温度较聚二甲基硅氧烷约高110℃,因此热稳定性更好.     

Enzyme-catalyzed ring-opening polymerization of ethylene isopropyl phosphate

Enzyme-catalyzed ring-opening polymerization of a cyclic phosphate (ethylene isopropyl phosphate) was achieved in bulk by using porcine pancreas lipase (PPL) as a catalyst. It was found that the higher the polymerization temperature and lipase concentration, the faster is the polymerization rate. The yield is not very sensitive to the lipase concentration, while the molecular weight decreases with increasing lipase concentration. From ¹³C and ¹H NMR analysis, the polymer has a phosphoric acid group at one end and a hydroxyl group at the other. The ³¹P{¹H} NMR spectrum indicated that some chain transfer might take place in the polymerization.