元素医学食疗法治病有疗效

南京金陵微量元素与健康研究所用元素医学食疗法治疗冠心病、癌症、脑血管病、老年痴呆症、糖尿病、艾滋病、帕金森氏综合症、脑中风及其后遗症、小儿脑瘫、系统性红斑狼疮、癫痫、精神分裂症、血小板减少、肌痉挛、肌无力、肌萎缩、胆汁反流、偏头痛、前列腺肥大、性机能低下、不孕、不育、肝胆结石、脱发、斑秃、白癜风、银屑病、再障贫血、血友病、白血病、荨麻疹、哮喘、风湿、类风湿、高（低）血压、高血脂、高血糖、高血沉、高尿酸、动脉硬化、骨质疏松、元素中毒症,地方病,遗传病等现代医学界束手无策的疑难病症,先后都获得了很好的疗效。     

《色谱》投稿须知(2023)北大核心CSCD

《色谱》是中国化学会和中国科学院大连化学物理研究所主办、中国科学技术协会主管、国内外公开发行的专业性学术期刊,月刊。主要报道色谱学科的基础性研究成果、色谱及其交叉学科的重要应用成果及其进展,包括新方法、新技术、新仪器在各个领域的应用,色谱仪器与部件的研制和开发。被Medline、ESCI、CA、CSA、JST、AA、CHI、MSB-S、AJ、IC、SCOPUS等收录。曾入选百种中国杰出学术期刊、中国最具国际影响力学术期刊、中国科学院优秀期刊、中国科协优秀期刊、中文核心期刊、中国科技核心期刊、中国精品科技期刊、中国科协精品科技期刊工程项目。     

《色谱》投稿须知(2022)北大核心CSCD

《色谱》是中国化学会和中国科学院大连化学物理研究所主办、中国科学技术协会主管、国内外公开发行的专业性学术期刊,月刊。主要报道色谱学科的基础性研究成果、色谱及其交叉学科的重要应用成果及其进展,包括新方法、新技术、新仪器在各个领域的应用,色谱仪器与部件的研制和开发。被Medline、ESCI、CA、CSA、JST、AA、CHI、MSB-S、AJ、IC、SCOPUS等收录。曾入选百种中国杰出学术期刊、中国最具国际影响力学术期刊、中国科学院优秀期刊、中国科协优秀期刊、中文核心期刊、中国科技核心期刊、中国精品科技期刊、中国科协精品科技期刊工程项目。     

微波消解-ICP-AES法测定回汉族人群血清中的微量元素

本文测定了宁夏农村地区回汉族人群血清中Li、Co、Cd、Ga、Ba、Sr、Cu、Zn、Fe、Al、Se、Sn、B、Mn、Cr、Ni、Pb、Ca、K、Mg、Na、P、S的含量。采用微波消解对样品进行了前处理,使用电感耦合等离子体原子发射光谱法(ICP-AES)进行测定。该方法的RSD≤3.5%,样品加标回收率为90%~117%。该法简便、快速、灵敏、准确,可用于血清中多种元素含量的同时测定。研究结果表明,K、Fe、Cu、Mn、Ni、Ga、Al、Se、Pb、S、Cd、Cr、Sr、Ca这14种元素含量在回族和汉族之间存在着显著性差异(P0.05),探讨了产生上述差异的原因。     

2014年《化学分析计量》杂志征订启事

《化学分析计量》是中国兵器工业集团第五三研究所(国防科技工业应用化学一级计量站)主办的全国性分析测试、化学计量专业技术刊物。主要报道分析测试、化学计量行业的技术、学术论文;标准物质的研制与应用;分析、计量仪器的研制、开发、检定、维修经验;相关专业的法规、政策、标准,管理经验,技术发展动态,综述和技术经济信息等。主要栏目有分析测试、仪器设备、标准物质、计量管理、不确定度、经验交流、综述、讲座、企业风采、市场动态、简讯、广告等。     

白酒产品质量国家监督抽查质量公告

为了维护消费者的合法权益，促进白酒行业健康发展，国家质检总局组织对白酒产品质量进行了国家监督抽查。共抽查了北京、天津、河北、山西、辽宁、吉林、黑龙江、江苏、浙江、安徽、江西、山东、河南、湖北、四川、重庆、贵州、云南、陕西等19个省、自治区、直辖市333家企业生产的350种产品（不涉及出口产品），     

《分析化学简明手册》

该书对常用分析方法的基本原理、仪器设备、工作条件和应用领域进行了全面系统的介绍,包括化学基础知识、定性分析、重量分析、滴定分析、电化学分析方法、分子光谱分析、原子光谱分析、X射线光谱分析、色谱法、其他谱学分析方法     

三七生长初期不同部位微量元素的含量测定

采用电感耦合等离子体发射光谱法(ICP-AES),对文山地区GAP种植及农户常规种植的生长初期三七不同部位中的微量元素Mg、P、Ca、Mn、Na、Fe、Co、Cu、Zn、Mo、Cr、Ni、Ge、Se等14种元素进行了测定分析。结果表明,三七的根、茎、叶中含有丰富的人体必需Mg、P、Ca、Mn、Na、Fe、Co、Cu、Zn、Mo、Ge、Se等有益元素,且P、Ca、Mg、Fe含量较高,Na、Mn、Co、Zn次之,Co、Mo、Cr、Ni、Ge、Se含量均较低。为三七GAP栽培标准和特征制订、三七道地药材的化学特征——化学指纹图谱的建立及研究提供理论依据。     

欢迎订阅 欢迎投稿 欢迎刊登广告《分析测试学报》

《分析测试学报》是由中国广州分析测试中心、中国分析测试协会共同主办的全国性学术刊物,中文核心期刊。刊登质谱学、光谱学、色谱学、波谱学、电化学、电子显微学等方面的分析测试新理论、新方法、新技术的研究成果,介绍新仪器装置及在生物、医药、化学化工、商检、食品检验等方面实用性强的实验技术。适合科研院所、高等院校、检测机构、医药、卫生以及厂矿企业分析测试工作和管理人员阅读。     

电感耦合等离子体发射光谱法同时测定文丘里泥中铜、铅、砷、锑、铋、碲、汞

建立了测定文丘里泥中铜、铅、砷、锑、铋、碲和汞含量的电感耦合等离子体发射光谱法。于180～300℃采用逆王水溶液、氟化氢铵溶液和酒石酸溶液分解试样，选用Cu 324.754 nm、Pb 216.996 nm、As 189.042 nm、Sb 206.883nm、Bi 190.234 nm、Te 214.281 nm、Hg 184.950 nm为分析谱线，以电感耦合等离子体发射光谱法测定文丘里泥中铜、铅、砷、锑、铋、碲和汞含量。在最优的实验条件下，各元素校准曲线的相关系数均大于0.999。铜、铅、砷、锑、铋、碲和汞的检出限分别为0.000 3%、0.000 7%、0.000 4%、0.000 2%、0.000 8%、0.000 3%和0.000 4%。文丘里泥实际样品中铜、铅、砷、锑、铋、碲和汞测定结果的相对标准偏差为0.11%～3.5%(n=7)，加标回收率为95.0%～106%。     

A confirmatory method for the simultaneous extraction,separation, identification and quantification of Tetracycline,Sulphonamide, Trimethoprim and Dapsone residues in muscle by ultra-high-performance liquid chromatography–tandem mass spectrometry according to Commission Decision 2002/657/EC

A rapid confirmatory multi-residue method for the analysis of tetracyclines, sulphonamides, trimethoprim and dapsone by UPLC-MS/MS is described. The method is able to quantify and confirm the following 19 compounds, oxytetracycline, tetracycline, chlortetracycline, doxycycline, sulfadiazine, sulfathiazole, sulfapyridine, trimethoprim, sulfamerazine, sulfamethizole, sulfamethazine, sulfamethoxypyridazine, sulfamonomethoxine, sulfachlorpyridazine, dapsone, sulfamethoxazole, sulfisoxazole, sulfaquinoxaline and sulfadimethoxine. Samples are extracted with 0.1 M EDTA and acetonitrile, which is then evaporated under a stream of nitrogen and reconstituted in water. Following centrifugation and filtering, an aliquot is analysed by UPLC-MS/MS using positive electrospray ionisation and multiple reaction monitoring. The method is deemed rapid as all analytes are extracted by a single extraction technique, with no solid-phase extraction clean up required. Validation is according to Commission Decision 2002/657/EC and was carried out for bovine, porcine, ovine and poultry species. Specificity, recovery, repeatability, reproducibility, CCα and CCβ data is presented.     

Simultaneous analysis of pesticides from different chemical classes by using a derivatisation step and gas chromatography-mass spectrometry

This work presents a new method to analyse simultaneously by GC–MS 31 pesticides from different chemical classes (2,4 D, 2,4 MCPA, alphacypermethrin, bifenthrin, bromoxynil, buprofezin, carbaryl, carbofuran, clopyralid, cyprodinil, deltamethrin dicamba, dichlobenil, dichlorprop, diflufenican, diuron, fenoxaprop, flazasulfuron, fluroxypyr, ioxynil, isoxaben, mecoprop-P, myclobutanil, oryzalin, oxadiazon, picloram, tau-fluvalinate tebuconazole, triclopyr, trifluralin and trinexapac-p-ethyl). This GC–MS method will be applied to the analysis of passive samplers (Tenax^® tubes and SPME fiber) used for the evaluation of the indoor and outdoor atmospheric contamination by non-agricultural pesticides. The method involves a derivatisation step for thermo-labile or polar pesticides. Different agents were tested and MtBSTFA (N-(t-butyldimethylsilyl)-N-methyltrifluoroacetamide), a sylilation agent producing very specific fragments [M−57], was retained. However, diuron could not be derivatised and the isocyanate product was used for identification and quantification. Pesticides which did not need a derivatisation step were not affected by the presence of the derivatisation agent and they could easily be analysed in mixture with derivatised pesticides. The method can be coupled to a thermal-desorption unit or to SPME extraction for a multiresidue analysis of various pesticides in atmospheric samples.     

Multi-Elemental Analysis as a Tool to Ascertain the Safety and the Origin of Beehive Products: Development,Validation, and Application of an ICP-MS Method on Four Unifloral Honeys Produced in Sardinia,Italy

Despite unifloral honeys from Sardinia, Italy, being appreciated worldwide for their peculiar organoleptic features, their elemental signature has only partly been investigated. Hence, the principal aim of this study was to measure the concentration of trace and toxic elements (i.e., Ag, As, Ba, Be, Bi, Cd, Co, Cr, Cu, Fe, Hg, Li, Mn, Mo, Ni, Pb, Sb, Sn, Sr, Te, Tl, V, and Zn) in four unifloral honeys produced in Sardinia. For this purpose, an original ICP-MS method was developed, fully validated, and applied on unifloral honeys from asphodel, eucalyptus, strawberry tree, and thistle. Particular attention was paid to the method’s development: factorial design was applied for the optimization of the acid microwave digestion, whereas the instrumental parameters were tuned to minimize the polyatomic interferences. Most of the analytes’ concentration ranged between the relevant LoDs and few mg kg⁻¹, while toxic elements were present in negligible amounts. The elemental signatures of asphodel and thistle honeys were measured for the first time, whereas those of eucalyptus and strawberry tree honeys suggested a geographical differentiation if compared with the literature. Chemometric analysis allowed for the botanical discrimination of honeys through their elemental signature, whereas linear discriminant analysis provided an accuracy level of 87.1%.     

电感耦合等离子体原子发射光谱测定混合稀土铜合金中稀土和非稀土元素

本文提出了用电感耦合等离子体原子发射光谱(ICP—AES)法直接测定混合稀土铜合金中13个非稀土和稀土元素。选用了合适的分析线对及ICP光源的工作参数。探讨了观察高度、功率、酸度、载气和基体量的变化对被测元素谱线强度的影响。不用化学分离,可一次同时测定La、Ce、pr、Nd、Sm、Sn、Zn、Fe、Al、Ni、Pb,Mg和Mn。测定范围(％):La_2O_3:0.096～6.4;CeO_2:0.24～16;Pr_6O_(11):0.0384～2.56;Nd_2O_3:0.096～6.4;Sn:0.096～3.2;Mg、Mn、Fe,Sm_2O_3:0.024～1.6;Zn:0.396～6.7;Pb:0.092～6.4;Ni:0.096～3.2;Al:0.0384～1.28。相对标准偏差±3.0～9.1％;回收率85～116％满足冶炼上的要求,得到了满意的结果。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Self-Assembling Drug Formulations with Tunable Permeability and Biodegradability

This review focuses on key topics in the field of drug delivery related to the design of nanocarriers answering the biomedicine criteria, including biocompatibility, biodegradability, low toxicity, and the ability to overcome biological barriers. For these reasons, much attention is paid to the amphiphile-based carriers composed of natural building blocks, lipids, and their structural analogues and synthetic surfactants that are capable of self-assembly with the formation of a variety of supramolecular aggregates. The latter are dynamic structures that can be used as nanocontainers for hydrophobic drugs to increase their solubility and bioavailability. In this section, biodegradable cationic surfactants bearing cleavable fragments are discussed, with ester- and carbamate-containing analogs, as well as amino acid derivatives received special attention. Drug delivery through the biological barriers is a challenging task, which is highlighted by the example of transdermal method of drug administration. In this paper, nonionic surfactants are primarily discussed, including their application for the fabrication of nanocarriers, their surfactant-skin interactions, the mechanisms of modulating their permeability, and the factors controlling drug encapsulation, release, and targeted delivery. Different types of nanocarriers are covered, including niosomes, transfersomes, invasomes and chitosomes, with their morphological specificity, beneficial characteristics and limitations discussed.     

Unusual metals as electrode materials for electrochemical sensors

Although noble metals are still widely used in electroanalysis, a plethora of different nonconventional metals is now enriching the panorama of materials acting as the electrochemical transducer in sensing systems. In particular, Ti, Cu, Co, Fe, Mo, Ta, W, Rh, Bi, Sb, Te and Pb are discussed here in view of their peculiar physicochemical properties and of the interesting electrocatalytic activities ascribable to these elements and to the relevant metal oxide ultrathin films that spontaneously form at the electrode–solution interface. This behaviour, exploitable in electroanalysis for the detection of a number on analytes, is often accompanied by low price and high resistance to corrosion and to abrasion characterising these materials. These peculiarities encourage the possible use of the cited metals in a wide number of analytical frames, ranging from process control to bioimplantable sensing systems.     

Pharmacological Extracts and Molecules from Virola Species: Traditional Uses,Phytochemistry, and Biological Activity

Virola is the largest genus of Myristicaceae in America, comprising about 60 species of medium-sized trees geographically spread from Mexico to southern Brazil. The plant species of this genus have been widely used in folk medicine for the treatment of several ailments, such as rheumatic pain, bronchial asthma, tumors in the joints, intestinal worms, halitosis, ulcers, and multiple infections, due to their pharmacological activity. This review presents an updated and comprehensive summary of Virola species, particularly their ethnomedicinal uses, phytochemistry, and biological activity, to support the safe medicinal use of plant extracts and provide guidance for future research. The Virola spp.’s ethnopharmacology, including in the treatment of stomach pain and gastric ulcers, as well as antimicrobial and tryponosomicidal activities, is attributable to the presence of a myriad of phytoconstituents, such as flavonoids, tannins, phenolic acids, lignans, arylalkanones, and sitosterol. Hence, such species yield potential leads or molecular scaffolds for the development of new pharmaceutical formulations, encouraging the elucidation of not-yet-understood action mechanisms and ascertaining their safety for humans.     

Physico-chemical properties of Chitosan films

Chitosan films obtained by dry phase inversion were prepared from an aqueous solution of chitosan in acetic acid. The films, of thickness less than 20 μm, were transparent, very flexible and had smooth surfaces. Increasing the film thickness induced an increase of the internal tensions and the consequent formation of a rough surface. Structural investigations by X-ray diffraction and Fourier transform IR analysis, showed that the chitosan films, as prepared, are amorphous. Further annealing to evaporate acetic acid and water traces, changed the amorphous phase into a more ordered phase, characterized by diffraction peaks at 2θ values of 9, 17, 20 and 23 degrees. Thermal investigations by TG, DTG, and DTA revealed that the decomposition of the chitosan films as prepared proceeds in two stages, starting from 180°C and 540°C.     

Synthesis and Crystal Structure of 1-（N,N-Di-（p-toluenesulfonyl））-amino- 2-（N＇-p-toluenesulfonyl）-amino-3,5-dinitrobenzene

The title compound, 1-(N,N-di-(p-toluenesulfonyl))-amino-2-(N'-p-toluenesulfonyl)-amino-3,5-dinitrobenzene, was synthesized and structurally determined by single-crystal X-ray diffraction method. It crystallizes in orthorhombic, space group Pna21 with a = 13.723(2), b =25.354(4), c = 8.6565(12)(A), V= 3011.9(8)(A)3, Z= 4, Mr = 660.68, F(000) = 1368, Dc = 1.457 g/cm3,μ = 0.309, the final R = 0.0609 and wR = 0.1042. The H atom of N2-H group, which is the unique recognition site to anion, is enveloped by two oxygen atoms and one benzene from two and one p-toluenesulfonyl moieties, respectively.