Preparation and electrochemical properties of Ag-modified TiO2 nanotube anode material for lithium–ion battery

TiO₂ nanotubes prepared by using a hydrothermal process were firstly coated with silver nanoparticles as the anode materials for lithium–ion batteries by the traditional silver mirror reaction. The physical properties of the as-synthesized samples were investigated by X-ray diffraction and transmission electron microscopic. The as-prepared samples were used as negative materials for lithium–ion battery, whose charge–discharge properties, cyclic voltammetry, electrochemical impedance spectroscopy and cycle performance were examined in detail. The results showed that the Ag additive decreased the polarization of anode, and marvelously improved the high-rate discharge capacity and cycling stability of TiO₂ nanotubes.     

Synthesis and photocatalytic applications of Ag/TiO2-nanotubes

TiO₂- and Ag/TiO₂-nanotubes (NTs) were synthesized by hydrothermal methods and microwave-assisted preparation, respectively. Scanning electron microscopy, high resolution transmission electron microscopy, Brunauer-Emmett-Teller particle surface area measurement and X-ray diffraction were used to characterize the nanotubes. Rutile TiO₂-NTs with Na₂Ti₅O₁₁ crystallinity had a length range of 200-400 nm and diameters of 10-20 nm. TiO₂- and Ag/TiO₂-NTs with a 0.4% deposition of Ag had high surface areas of 270 and 169 m² g⁻¹, respectively. The evaluation of photocatalytic activity showed that Ag/TiO₂-NTs displayed higher photocatalytic activity than pure TiO₂-NTs and a 60.91% degradation of Rhodamine-B with 0.8% deposition of Ag species. Also 60% of Rhodamine-6G was physisorbed and 40% chemisorbed on the surface of TiO₂-NTs. In addition, the photocatalytic degradations of organochlorine pesticides taking α-hexachlorobenzene (BHC) and dicofol as typical examples, were compared using Ag/TiO₂-NTs, and found that their degradations rates were all higher than those obtained from commercial TiO₂.     

Effect of the Titanium Dioxide Shell on the Plasmon Properties of Silver Nanoparticles

The results of the synthesis of Ag—TiO₂ nanostructures were presented. The optical properties of silver nanoparticles and Ag—TiO₂ structures were studied. The size and shape of Ag—TiO₂ nanostructures were determined. The electron density in silver, the damping constant of plasma oscillations, and the ratio between the masses of the Ag core and the TiO₂ shell were determined from the absorption spectra of Ag and Ag—TiO₂ solutions. It was shown that the semiconductor shell of titanium dioxide leads to a decrease in the electron density in silver nanoparticles and the damping constant of plasma oscillations.     

玻璃微珠/Ag/TiO2可见光催化剂的制备与表征

通过离子交换法将Ag纳米颗粒负载于玻璃微珠的表面及浅表层,并以钛酸四丁酯的乙醇溶液为前驱体,将TiO₂负载于包含银的玻璃微珠表面,制得一种玻璃微珠/Ag/TiO₂复合光催化剂。由于纳米银的表面等离子体吸收效应,该复合光催化剂具有一定的可见光响应特性。利用XRD、SEM对样品进行表征,可发现玻璃微珠表面形成一层均匀多孔的锐钛矿TiO₂,其粒径均在50 nm左右。由漫反射光谱可得出该催化剂具有较强的可见光吸收,并在降解甲基橙溶液的试验中表现出较好的可见光催化活性。     

Efficient silver modification of TiO2 nanotubes with enhanced photocatalytic activity

In this paper, Ag(CH₃NH₂)₂⁺, Ag(NH₃)₂⁺ and Ag⁺ with different radii have been used as silver sources to find out the distribution of Ag ions on the H-TNT surface, which is critical to the final performance. The influence of this distribution on visible photocatalytic activity is further studied. The results indicate that, when Ag⁺ used as silver source with low concentration, these small sized silver ions mainly distribute on interlayer spacing of H-TNT. After heat-treatment and photo-reduction, the generated silver nanoparticles uniformly embed in the anatase TiO₂ nanotube walls, and bring large interfacial area between Ag particles and TiO₂ nanotubes. The separation effect of photogenerated electron-hole pair in TiO₂ is enhanced by Ag particles, and achieves the best at 0.15 g/L, much higher than P25, TiO₂/0, Ag-N@TiO₂ and Ag-C-N@TiO₂. This paper provides new ideas for the modification of TiO₂ nanotubes.     

Synthesis,Characterization, and Photocatalytic Properties of Ag/TiO2 Composite Nanofibers Prepared by Electrospinning

Ag nanoparticles (Ag NPs) embedded titanium dioxide (TiO₂) nanofibers were fabricated by colloidal sol process, electrospinning, and calcination technique. Calcination of the electrospun nanofibers were heat treated at 600°C for 180 minutes in air atmosphere. X-ray diffraction patterns exhibited that the anatase phase and silver coexisted in the resulted Ag NPs/TiO₂ nanofibers; transmission electron microscopy demonstrated Ag NPs well spread in the porous microstructure of composite fibers. The prepared nanofibers were utilized as photocatalyst for degradation of methyl orange. The degradation rate of methyl orange dye solution containing Ag/TiO₂ composite nanofibers is 99% only after irradiation for 3 hours. It is proposed that these new Ag NPs/TiO₂ composite nanofibers will have potential application in water pollution treatment.      

Microwave‐Hydrothermal Preparation and Visible‐Light Photoactivity of Plasmonic Photocatalyst Ag‐TiO2 Nanocomposite Hollow Spheres

Visible‐light‐driven plasmonic photocatalyst Ag‐TiO₂ nanocomposite hollow spheres are prepared by a template‐free chemically‐induced self‐transformation strategy under microwave‐hydrothermal conditions, followed by a photochemical reduction process under xenon lamp irradiation. The prepared samples are characterized by using scanning electron microscopy, transmission electron microscopy, X‐ray diffraction, N₂ adsorption‐desorption isotherms, X‐ray photoelectron spectroscopy, UV/Vis and Raman spectroscopy. Production of ?OH radicals on the surface of visible‐light illuminated TiO₂ was detected by using a photoluminescence method with terephthalic acid as the probe molecule. The photocatalytic activity of as‐prepared samples was evaluated by photocatalytic decolorization of Rhodamine B (RhB) aqueous solution at ambient temperature under visible‐light irradiation. The results show that the surface plasmon absorption band of the silver nanoparticles supported on the TiO₂ hollow spheres was red shifted, and a strong surface enhanced Raman scattering effect for the Ag‐TiO₂ nanocomposite sample was observed. The prepared nanocomposite hollow spheres exhibits a highly visible‐light photocatalytic activity for photocatalytic degradation of RhB in water, and their photocatalytic activity is higher than that of pure TiO₂ and commercial Degussa P25 (P25) powders. Especially, the as‐prepared Ag‐TiO₂ nanocomposite hollow spheres at the nominal atomic ratio of silver to titanium ( R ) of 2 showed the highest photocatalytic activity, which exceeds that of P25 by a factor of more than 2.     

银负载量对网状TiO2柔性薄膜电极储锂性能的影响

本工作采用水热法结合银镜反应制备出一系列不同Ag负载量（2.2%、4.0%、6.4%,w/w）改性的3D纳米网状结构Ag@TiO₂薄膜电极。利用电感耦合等离子体技术（ICP）、X射线衍射（XRD）、扫描电镜（SEM）、透射电镜（TEM）和X射线能谱（EDX）等表征手段测试所合成材料的形貌及成分,实验结果表明Ag纳米颗粒可以成功沉积在TiO₂纳米线表面。电化学测试数据则表明,4.0%（w/w）负载量的Ag@TiO₂相比于未改性和其他负载量的TiO₂纳米线具有更好的倍率性能和更稳定的可逆容量。在50,100,200,400,800和1 200 mA·g^-1的电流密度条件下,该改性电极的放电容量可分别达到261.4,253.7,239.5,216.5,193.1和185.1 mAh·g^-1,在200 mA·g^-1下循环80次后容量保持率仍能达到99.8%。     

银负载量对网状TiO_2柔性薄膜电极储锂性能的影响

采用水热法结合银镜反应制备出一系列不同Ag负载量(2.2%、4.0%、6.4%,w/w)改性的3D纳米网状结构Ag@Ti O2薄膜电极。利用电感耦合等离子体技术(ICP)、X射线衍射(XRD)、扫描电镜(SEM)、透射电镜(TEM)和X射线能谱(EDX)等表征手段测试所合成材料的形貌及成分,实验结果表明Ag纳米颗粒可以成功沉积在Ti O2纳米线表面。电化学测试数据则表明,4.0%(w/w)负载量的Ag@Ti O2相比于未改性和其他负载量的Ti O2纳米线具有更好的倍率性能和更稳定的可逆容量。在50,100,200,400,800和1 200 m A·g~(-1)的电流密度条件下,该改性电极的放电容量可分别达到261.4,253.7,239.5,216.5,193.1和185.1 m Ah·g~(-1),在200 m A·g~(-1)下循环80次后容量保持率仍能达到99.8%。     

CdS/TiO2纳米管复合结构的制备与光电性能研究

利用阳极氧化法在钛金属基底表面制备一层TiO2纳米管阵列薄膜,然后通过水热反应在TiO2纳米管上负载CdS纳米粒子,形成CdS/TiO2纳米管的复合结构。利用SEM、XRD、XPS、UV-Vis等手段对其形貌和结构进行表征。进一步考察了CdS/TiO2纳米管的光电性能和光催化活性,结果表明,相比于TiO2纳米管,CdS/TiO2纳米管复合结构在紫外光和可见光下都具有更好的光催化活性及光电性能。     

CdS/TiO2纳米管复合结构的制备与光电性能研究

利用阳极氧化法在钛金属基体表面制备一层TiO₂纳米管阵列薄膜, 然后通过水热反应在TiO₂纳米管上负载CdS纳米粒子, 形成CdS/TiO₂纳米管的复合结构。利用SEM、XRD、XPS、UV-Vis等手段对其形貌和结构进行表征。进一步考察了CdS/TiO₂纳米管的光电性能和光催化活性, 结果表明, 相比于TiO₂纳米管, CdS/TiO₂纳米管复合结构在紫外光和可见光下都具有更好的光催化活性及光电性能。     

Characterization and evaluation of the photocatalytic properties of wormhole-like mesoporous silica incorporating TiO2, prepared using different hydrothermal and calcination temperatures

TiO₂?CSiO₂ mesoporous materials were synthesised by deposition of TiO₂ nanoparticles prepared by the sol?Cgel method on to the internal pore surface of wormhole-like mesoporous silica. In this work we synthesised wormhole-like mesoporous silica of different surface area by changing the hydrothermal temperature (70, 100, or 130?°C). Subsequent to this, titania solution was deposited on to the inner surface of the pores and this was followed by calcination at different temperatures (400, 600, or 800?°C). The effect of different hydrothermal and calcination temperature on the photocatalytic properties was evaluated. The samples were characterized by N₂-sorption, X-ray diffraction, X-ray photoelectron spectroscopy, field emission scanning electron microscopy, and transmission electron microscopy. The effect of different hydrothermal and calcination temperatures on the photocatalytic properties was evaluated by measuring the degradation of methylene blue in aqueous solution under UV light irradiation (mercury lamp, 125?W). The results indicated that appropriate surface area and degree of crystallinity are two important factors for obtaining high photocatalytic efficiency. Samples prepared at a hydrothermal temperature of 100?°C and calcined at 800?°C had the best photocatalytic performance, because of the highest surface area and high crystallinity.     

Sol–gel and impregnated prepared silver TiO<Subscript>2</Subscript> semiconductors as photocatalysts for the UV decomposition of 2,4-<Emphasis Type="SmallCaps">d</Emphasis>: a comparative study of the preparation method

UV-photocatalytic oxidation of 2,4-dichlorophenoxyacetic acid (2,4-d) was studied on Silver–TiO₂ semiconductors prepared by co-gelling silver acetylacetonate and titanium butoxide (TiO₂–Ag) or by incipient impregnation with silver acetylacetonate (0.5 wt% Ag) of bare TiO₂ sol–gel and TiO₂–P25 supports. The comparative study shows that only a slight modification on the specific surface area was obtained on the TiO₂–Ag sample (60 m²/g) as compared to the TiO₂ sol–gel bare support (65 m²/g). XRD patterns of the samples show anatase as the crystalline phase present in the sol–gel TiO₂ preparations. By means of HRTEM and HAADF-STEM electron microscopy techniques, silver nanoparticles (<12.0 nm) were identified which are very small to be detected by XRD. The photocatalytic oxidation of the herbicide 2,4-d used as a model of contaminant show for the kinetic parameter t_1/2 values of 45 min for the TiO₂–Ag sample, while for the impregnated Ag/TiO₂ and Ag/P25 nanomaterials t_1/2 was 124 and 66 min, respectively. The higher photoactivity of the TiO₂–Ag photocatalyst is attributed to a combined effect of the silver nanoparticles in interaction with the titania semiconductor.     

Characterization of Pd/TiO2 embedded in multi-walled carbon nanotube catalyst with a high photocatalytic activity

Pd particles loading on TiO₂-embedded multi-walled carbon nanotubes (MWCNTs), MWCNTs, and TiO₂ particles were prepared via an impregnation method with palladium(II) chlorate solution followed by heat treatment at high temperature. To characterize the catalysts, BET surface area, scanning electron microscopy, transmission electron microscopy, X-ray diffraction, energy dispersive X-ray, Fourier transform infrared spectroscopy and ultraviolet-visible spectroscopy were employed. The prepared catalysts were tested in degradation of methyl orange under visible light. Pd/TiO₂-MWCNTs catalyst demonstrates the highest photocatalytic activity, and the phase transformation from PdO to Pd0 phase takes place at heat treatment of embedded TiO₂. The nanoparticles size of TiO₂ can be decreased by introduction of MWCNTs species. Combining structural characterization with kinetic study results we could conclude that the superior catalytic performance could arise due to the Pd/TiO₂-MWCNTs catalyst’s structure.     

Hierarchical TiO2 nanosheet‐assembled nanotubes with dual electron sink functional sites for efficient photocatalytic degradation of rhodamine B

A novel Pt–TiO₂/Ag nanotube photocatalyst has been synthesized successfully via a facile method. TiO₂ nanotubes are assembled with numerous ultrathin TiO₂ nanosheets and show a highly open structure. The gaps between adjacent TiO₂ nanosheets can serve as channels for the access of reactants, accelerating the mass transfer process. During the fabrication process of the Pt–TiO₂/Ag nanotube photocatalyst, high‐quality Pt–SiO₂ nanotubes are synthesized first with the structure‐directing effect of polyvinylpyrrolidone. Then a TiO₂ layer is coated on the outside surface of the silica nanotubes. The introduced titanium species can be converted into TiO₂ nanosheet structure during the subsequent hydrothermal treatment, gradually constructing nanosheet‐assembled nanotubes. Lastly, after the introduction of another electron sink function site of Ag through UV irradiation, the Pt–TiO₂/Ag nanotube photocatalyst with dual electron sink functional sites is obtained. The specially doped Pt and Ag NPs can simultaneously inhibit the recombination process of photogenerated charge carriers and increase light utilization efficiency. Therefore, the as‐synthesized Pt–TiO₂/Ag nanotube catalyst exhibits a high photocatalytic degradation performance for rhodamine B of 0.2 min^?1, which is about 3.2 and 5.3 times as high as that of Pt–TiO₂ and TiO₂ nanotubes because of the enhanced charge carrier separation efficiency. Furthermore, in the unique nanoarchitecture, the nanotubes are assembled with numerous ultrathin TiO₂ nanosheets, which can absorb abundant active species and dye molecules for photocatalytic reaction. On the basis of experimental results, a possible rhodamine B degradation mechanism is proposed to explain the excellent photocatalytic efficiency of the Pt–TiO₂/Ag nanotube photocatalyst.     

Glucose biosensors based on Ag nanoparticles modified TiO2 nanotube arrays

A GOx/Ag/TiO₂ glucose biosensor was achieved by photoreducing Ag nanoparticles on TiO₂ nanotube arrays (NTAs) following with adsorption of GOx. The morphology, structure, and element component of Ag/TiO₂ NTAs were characterized by scanning electron microscope, transmission electron microscope, and X-ray diffraction. Ag nanoparticles were uniformly deposited on surface of TiO₂ NTAs with average size of 15 nm and the size and distribution changed with the immersing time of TiO₂ NTAs in AgNO₃ aqueous solution. Electrochemical properties of Ag/TiO₂ NTAs were characterized by cyclic voltammetry and amperometric detection of H₂O₂, revealing that TiO₂ NTAs with immersing time of 30 min achieve the best electrochemical activity. The GOx/Ag/TiO₂ NTAs biosensor with optimum conditions achieves a sensitivity of 0.39μA mM^?1 cm^?2 with liner range from 0.1 to 4 mM.     

Highly Active Nickel Nanoparticles Supported on TiO2 Nanotube Electrodes for Methanol Electrooxidation

Nickel nanoparticles/TiO₂ nanotubes/Ti electrodes were prepared by galvanic deposition of nickel nanoparticles on the TiO₂ nanotubes layer on titanium substrates. Titanium oxide nanotubes were fabricated by anodizing titanium foil in a DMSO fluoride‐containing electrolyte. The morphology and surface characteristics of titanium dioxide nanotubes and Ni/TiO₂/Ti electrodes were investigated using scanning electron microscopy and energy‐dispersive X‐ray spectroscopy, respectively. The results indicated that nickel nanoparticles were homogeneously deposited on the surface of TiO₂ nanotubes. The electrocatalytic behaviour of nickel nanoparticles/TiO₂/Ti electrodes for the methanol electrooxidation was studied by electrochemical impedance spectroscopy, cyclic voltammetry, differential pulse voltammetry and chronoamperometry methods. The results showed that Ni/TiO₂/Ti electrodes exhibit a considerably higher electrocatalytic activity toward the oxidation of methanol.     

Synthesis of metal-doped tio2 nanotubes and their catalytic performance for low-temperature co oxidation

Summary Gold-, gold and copper-doped TiO₂ nanotubes (Au/TiO₂ NTs, Au-Cu/TiO₂ NTs) are prepared by impregnation-reduction method. The doped nanotubes are characterized by powder X-ray diffraction (XRD) and transmission electron microscopy (TEM). Their catalytic performance for CO oxidation is also examined     

Ternary Ag/Polyaniline/Au nanocomposites: Preparation,characterization and electrochemical properties

Ternary Ag/Polyaniline/Au nanocomposites were synthesized successfully by immobilizing of Au nanoparticles (NPs) on the surface of Ag/Polyaniline (PANI) nanocomposites. Ag/PANI nanocomposites were prepared via in situ chemical polymerization of aniline in the presence of 4-aminothiophenol (4-ATP) capped silver colloidal NPs. Then, uniform gold (Au) NPs were assembled on the surface of resulted Ag/PANI nanocomposites through electrostatic interaction to get Ag/Polyaniline/Au nanocomposites. The nanocomposites were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDX), ultraviolet visible spectroscopy (UV-Vis), thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR). Moreover, Ag/PANI/Au nanocomposites were immobilized on the surface of a glassy carbon electrode and showed enhanced electrocatalytic activity for the reduction of H₂O₂ compared with Ag/PANI.     

Effect of Erbium on the Photocatalytic Activity of TiO2/Ag Nanocomposites under Visible Light Irradiation

Erbium co‐doped TiO₂/Ag catalysts are synthesized by using a simple, one‐step solvothermal method and characterized by X‐ray diffraction, field‐emission scanning electron microscopy, transmission electron microscopy, Raman analysis, X‐ray photoelectron spectroscopy, and diffuse reflectance spectroscopy. The catalysts exhibit anatase crystal structures with increased visible light absorption compared with pure TiO₂. Enhanced photocatalytic activity is observed with Er co‐doped TiO₂/Ag nanocomposites for Rhodamine B degradation under visible light irradiation. The photocatalytic activity of 1 % Er co‐doped TiO₂/Ag is much higher than that of TiO₂/Ag, TiO₂/Er, pure TiO₂, and commercial Degussa P25. The kinetics of the degradation process are studied and the pseudo‐first‐order rate constant (k) and half‐life time (t_1/2) of the reaction are calculated. The enhanced activity might be accredited to the efficient separation of electron–hole pairs by silver and higher visible light absorption of TiO₂ induced by Er.