单空位缺陷对载能氢原子与石墨层间碰撞的能量交换的影响的分子动力学研究

本文采用分子动力学方法研究空位缺陷对石墨层中碳氢粒子碰撞的影响.将氢原子以不同能量分别向单空位缺陷边缘的两个碳原子轰击,分析了入射氢原子的能量损失、发生吸附反应的能量范围和靶原子的能量传递过程.研究发现,单空位缺陷边缘的碳氢粒子更易发生吸附反应;在碳氢粒子正碰过程中,氢原子随入射能量变化出现了双反射区域;碳氢粒子在空位缺陷边缘吸附后,形成了高结合能的sp²结构,并出现悬挂键,其临近的碳碳键能未降低;单空位缺陷边缘的碳原子吸附氢原子能量的能力强而传递能量的能力弱.这些结果对理解聚变反应 关键词： 面向等离子体材料 分子动力学方法 单空位缺陷     

GaN中与C和O有关的杂质能级第一性原理计算

用局域密度泛函线性丸盒轨道大型超原胞方法(32个原子),对纯纤锌矿结构的GaN用调节计算参数(如原子球与“空球”的占空比)在自洽条件下使Eg的计算值(323eV)接近实验值(35eV).然后以原子替代方式自洽计算杂质能级在Eg中的相对位置.模拟计算了六角结构GaN中自然缺陷以及与C和O有关的杂质能级位置,包括其复合物.计算结果表明,单个缺陷如镓空位VGa、氮空位VN、氧代替氮ON、炭代替氮CN、炭代替镓CGa等与已有的计算结果基本一致.计算结果表明杂质复合物会导致单个杂质能级位置的相对变化.计算了CNON,CGaCN,CNOV和CGaVGa,其中CNON分别具有深受主与浅施主的特征,是导致GaN黄光的一种可能的结构. 关键词： GaN 杂质能级 电子结构     

单轴应变对H在α-Fe中占位及扩散的影响

采用基于密度泛函理论的第一性原理方法,研究了H在不同单轴应变下α-Fe中的间隙占位,计算了H原子的溶解能、态密度、电荷差分密度和电荷布居.结果表明:不同单轴拉压应变作用下,H原子优先占据四面体间隙(Ts)位,且随着压应变减小、拉应变增加,H原子越易溶于α-Fe.压应变使得Ts位的H获得更多的电子,而拉应变减少了这种电荷转移.应用LST/QST过渡态搜索计算垂直应变方向的扩散.八面体间隙位是邻近Ts位H的扩散过渡态.扩散激活能与应变呈线性关系,且随着压应变的增加,扩散激活能降低,扩散更容易.     

Theoretical study of the migration of the hydrogen atom adsorbed on aluminum nanowire

We study the behavior of a hydrogen atom adsorbed on aluminum nanowire based on density functional theory. In this study, we focus on the electronic structure, potential energy surface (PES), and quantum mechanical effects on hydrogen and deuterium atoms. The activation energy of the diffusion of a hydrogen atom to the axis direction is derived as 0.19 eV from PES calculations. The probability density, which is calculated by including quantum effects, is localized on an aluminum top site in both cases of hydrogen and deuterium atoms of the ground state. In addition, some excited states are distributed between aluminum atoms on the surface of the nanowire. The energy difference between the ground state and these excited states are below 0.1 eV, which is much smaller than the activation energy of PES calculations. Thus using these excited states, hydrogen and deuterium atoms may move to the axial direction easily. We also discuss the electronic structure of the nanowire surface using quantum energy density defined by one of the authors.     

Ti-doped nano-porous graphene: A material for hydrogen storage and sensor

Clustering of Ti on carbon nanostructures has proved to be an obstacle in their use as hydrogen storagematerials. Using density functional theory we show that Ti atoms will not cluster at moderate concentrations when doped into nanoporous graphene. Since each Ti atom can bind up to three hydrogen molecules with an average binding energy of 0.54 eV/H₂, this material can be ideal for storing hydrogen under ambient thermodynamic conditions. In addition, nanoporous graphene is magnetic with or without Ti doping, but when it is fully saturated with hydrogen, the magnetism disappears. This novel feature suggests that nanoporous graphene cannot only be used for storing hydrogen, but also as a hydrogen sensor.     

Mechanism of H2S molecule adsorption on the GaAs(100) surface: Ab initio quantum-chemical analysis

Ab initio quantum-chemical cluster calculations within the density-functional theory were carried out to study the mechanism of H₂S molecule adsorption on the gallium-rich surface of GaAs(100). It was shown that adsorption can occur in four stages: molecular adsorption; dissociative adsorption, during which an HS radical is adsorbed on a gallium atom comprising a dimer while the detached hydrogen atom is adsorbed on another surface atom of the semiconductor; hydrogen adatom migration between neighboring surface atoms of the semiconductor; and the formation of a Ga-S-Ga bridge bond and of a hydrogen molecule. The stationary-state energies and energy barriers to transitions between these states were determined. The conclusions drawn based on an analysis of calculated diagrams of the potential energy of the processes that occur are in good agreement with the experimental data available in the literature.     

Benefits of oxygen in CuInSe2 and CuGaSe2 containing Se-rich grain boundaries

Using density functional theory calculation, we show that oxygen (O) exhibits an interesting effect in CuInSe₂ and CuGaSe₂. The Se atoms with dangling bonds in a Se-rich Σ3 (114) grain boundary (GB) create deep gap states due to strong interaction between Se atoms. However, when such a Se atom is substituted by an O atom, the deep gap states can be shifted into valence band, making the site no longer a harmful non-radiative recombination center. We find that O atoms prefer energetically to substitute these Se atoms and induce significant lattice relaxation due to their smaller atomic size and stronger electronegativity, which effectively reduces the anion–anion interaction. Consequently, the deep gap states are shifted to lower energy regions close or even below the top of the valence band.     

Possible effects of oxygen in Te-rich Σ3 (112) grain boundaries in CdTe

Using density functional theory calculation, we show that oxygen (O) exhibits an interesting effect in CdTe. The Te atoms with dangling bonds in a Te-rich rich Σ3 (112) grain boundary (GB) create deep gap states due to strong interaction between Te atoms. However, when such a Te atom is substituted by an O atom, the deep gap states can be shifted toward the valence band, making the site no longer a harmful non-radiative recombination center. We find that O atoms prefer energetically substituting these Te atoms and induce significant lattice relaxation due to their smaller atomic size and stronger electronegativity, which effectively reduces the anion–anion interaction. Consequently, the deep gap states are shifted to lower energy regions close to or even below the top of the valence band.     

First-principles study of carbon atoms adsorbed on MgO(100) related to graphene growth

We have performed density functional theory calculations to understand the initial growth of graphene by studying the adsorption of carbon atoms on the oxide substrates such as magnesium oxide. For adsorption behaviors of carbon atoms on the MgO(100) surface, their adsorption geometries and binding energies are calculated. The binding of a carbon atom is the most stable at the on-top oxygen site on MgO(100). Such strong C–O binding is analyzed by examining the projected density of states. Then, we also increase the number of carbon atoms on MgO(100) to investigate their adsorption behaviors. Due to strong binding between carbon atoms, adsorbed carbon atoms form chain-like or graphene-like structures on the surface. Combined with relatively strong C–O binding, this result may explain the graphene growth on MgO(100) observed in available experiments.     

The interaction of hydrogen with point defects in aluminum metal

The extended Huckel molecular orbital approach previously applied to the study of the interaction of a hydrogen atom with a monovacancy in an aluminum lattice is used to examine the interaction of a single hydrogen atom with Frenkel defects and divacancies, the stability of a hydrogen molecule and multiple hydrogen atoms in defect structures, and the activation energies for diffusion of hydrogen through the lattice in the presence of vacancies or impurities. The relevance of these results to embrittlement and blistering processes is discussed.     

磷酸二氢铵水溶液构型能和径向分布函数的分子动力学模拟

采用分子动力学模拟对不同温度下磷酸二氢铵水溶液的构型能和径向分布函数进行了研究．磷酸二氢根被看作七节点模型,铵离子被看作五节点模型,而水分子则被看作简单点电荷模型．在饱和温度 附近,体系局域粒子数密度有波动．373?400 K的溶液势能增长缓慢表明磷酸二氢铵部分分解．磷酸二氢根中的氧原子与铵离子中氢原子的径向分布函数在三种不同温度下呈现明显不同,表明溶液中平均氢键数目随温度的变化明显改变．温度对磷酸二氢根中的氢原子和氧原子的结合有一定的影响,而在饱和溶液中有更多的生长基元产生．     

First-principles study of diffusion and interactions of vacancies and hydrogen in hcp-titanium

We present a study of the stability of n-vacancies (V (n)) and hydrogens in the hexagonal close-packed titanium system computed by means of first-principles calculations. In this work, performed by using the generalized gradient approximation of density functional theory, we focused on the formation energies and the processes of migration of these defects. In the first part, the calculated formation energy of the monovacancy presents a disagreement with experimental data, as already mentioned in the literature. The activation energy is underestimated by almost 20%. The stability of compact divacancies was then studied. We show that a divacancy is more stable than a monovacancy if their migration energies are of the same order of magnitude. We also predict that the migration process in the basal plane of the divacancy is controlled by an intermediate state corresponding to a body-centered triangle (BO site). The case of the trivacancies is finally considered from an energetic point of view. In the second part, the insertion of hydrogen and the processes of its migration are discussed. We obtain a satisfactory agreement with experimental measurements. The chemical nature of the interactions between hydrogen and titanium are discussed, and we show that the H-atom presents an anionic behavior in the metal. The trapping energy of hydrogen in a monovacancy as a function of the number of hydrogen atoms is finally presented.     

PbWO4晶体中的填隙氧及其对晶体光学性质的影响

运用GULP计算软件模拟计算了PbWO₄(PWO)晶体中不同位置的填隙氧原子点缺陷的生成能，计算结果表明：当填隙氧原子存在于(WO₄)^2-的周围时，填隙氧原子点缺陷的生成能最低；进一步运用基于密度泛函理论的全数值自洽DV-Xα方法计算了包含填隙氧原子的PWO晶体的态密度，计算结果表明：当填隙氧处在(WO₄)^2-的周围时，容易与(WO₄)^2-上的一个或两个氧离子相互作用形成分子离子O₂^2-或O₃^4-，通过分析这些计算结果，认为PWO晶体中350 nm吸收带的出现很可能与晶体中的氧分子离子有关.     

带有碳杂质的钨中氢稳定性的第一性原理研究

应用第一性原理计算方法研究了碳(C)原子对钨(W)中氢(H)原子稳定性的影响. 本征W中, 当C-H间距离为～2.5 Å时, H的溶解能出现最低值, 此时为H最稳定的位置. W中存在空位时, 由于C的影响, H占据的最佳电子密度面值为0.10 Å^-3. 研究发现, W中单空位最多能容纳10个H原子, 且不能形成H分子, 不同于没有C存在的情况, 表明C对W中H稳定性存在很大影响. 此外, 当两个C原子存在于空位中时, H占据的最佳电子密度面值变为0.13 Å^-3.     

氢修饰石墨烯纳米带压电性质的第一性原理研究

采用第一性原理计算方法, 系统研究了不同宽度、不同边缘修饰模式的间隔氢吸附锯齿型石墨烯纳米带的压电性质. 结构优化和结合能计算表明, 氢修饰石墨烯纳米带结构稳定. 氢原子间隔排列的吸附使得纳米带中的相邻碳原子成键及电荷状态不同, 导致拉伸时纳米带中六元碳环的正负电荷中心不再重合, 产生宏观电极化. 纳米带宽度越宽, 包含六元碳环数目越多, 则拉伸时纳米带长度方向上电偶极矩密度越大, 其压电性能越强. 另外, 边缘原子电荷状态决定了无拉伸时纳米带的初始电偶极矩密度, 其大小可以通过改变边缘氢原子的修饰模式来有效调控. 关键词： 石墨烯纳米带 第一性原理 修饰改性 压电性质     

First principles study of oxygen adsorption on nickel-doped graphite

Density functional theory is used in a spin-polarized plane wave pseudopotential implementation to investigate molecular oxygen adsorption and dissociation on graphite and nickel-doped graphite surfaces. Molecular oxygen physisorbs on graphite surface retaining its magnetic property. The calculated adsorption energy is consistent with the experimental value of ?0.1?eV. It is found that substituting a carbon atom of the graphite surface by a single doping nickel atom (2.8% content) makes the surface active for oxygen chemisorption. It is found that the molecular oxygen never adsorbs on doping nickel atom while it adsorbs and dissociates spontaneously into atomic oxygens on the carbon atoms which are bound to the nickel. The adsorption energy of ?1.4?eV and zero activation energy barrier indicate that O₂ dissociative adsorption is both thermodynamically and kinetically favoured over the surface. The large electric field near the doping nickel atom along with the excess electrons on the neighbouring carbon atoms, which are bound to the nickel induce molecular oxygen to adsorb and dissociate favourably.     

First-principle study of nanostructures of functionalized graphene

We present first-principle calculations of 2D nanostructures of graphene functionalized with hydrogen and fluorine, respectively, in chair conformation. The partial density of states, band structure, binding energy and transverse displacement of C atoms due to functionalization (buckling) have been calculated within the framework of density functional theory as implemented in the SIESTA code. The variation in band gap and binding energy per add atom have been plotted against the number of add atoms, as the number of add atoms are incremented one by one. In all, 37 nanostructures with 18C atoms, 3 × 3 × 1 (i.e., the unit cell is repeated three times along x-axis and three times along y-axis) supercell, have been studied. The variation in C–C, C–H and C–F bond lengths and transverse displacement of C atoms (due to increase in add atoms) have been tabulated. A large amount of buckling is observed in the carbon lattice, 0.0053–0.7487 Å, due to hydrogenation and 0.0002–0.5379 Å, due to fluorination. As the number of add atoms (hydrogen or fluorine) is increased, a variation in the band gap is observed around the Fermi energy, resulting in change in behaviour of nanostructure from conductor to semiconductor/insulator. The binding energy per add atom increases with the increase in the number of add atoms. The nanostructures with 18C+18H and 18C+18F have maximum band gap of 4.98 eV and 3.64 eV, respectively, and binding energy per add atom –3.7562 eV and –3.3507 eV, respectively. Thus, these nanostructures are stable and are wide band-gap semiconductors, whereas the nanostructures with 18C+2H, 18C+4H, 18C+4F, 18C+8F, 18C+10F and 18C+10H atoms are small band-gap semiconductors with the band gap lying between 0.14 eV and 1.72 eV. Fluorine being more electronegative than hydrogen, the impact of electronegativity on band gap, binding energy and bond length is visible. It is also clear that it is possible to tune the electronic properties of functionalized graphene, which makes it a suitable material in microelectronics.     

CH基团与金刚石(111)面的碰撞反应及其对碳膜生长的影响

等离子体增强化学气相沉积技术中的碳膜选择性自组装机理是高性能碳膜制备过程中的挑战性基础课题.采用经典分子动力学方法,模拟了不同能量(1.625-65 eV)的CH基团在清洁金刚石和吸氢金刚石(111)面上的轰击行为,获得了吸附、反弹、反应等各类事件的发生概率,并据此探讨了含氢碳膜制备过程中CH基团的贡献.结果表明,随着入射能量的增加,CH基团对薄膜生长的贡献由单纯的吸附、反弹机理向反应、吸附混合机理转变,其中最主要的反应过程是释放一个或两个氢原子的反应,而释放氢分子的反应则很少发生.这些反应不仅使薄膜生长过程更均匀、薄膜表面更平整,还降低了薄膜的氢含量.生长机理的转变导致低能量条件下所成薄膜中的多数碳原子都包含一个氢原子作为配位原子,而高能量条件下的薄膜中的碳原子则很少有氢原子作为配位原子.另外,通过分析sp~3-C和sp~2-C数目的变化,研究了CH基团对金刚石基底的破坏作用.     

Nb-Ti-Al合金高温氧化机理电子理论研究

采用递归法计算了Nb合金的电子态密度、原子镶嵌能、亲和能和团簇能等电子结构参数,研究Nb合金高温氧化机理.研究表明,氧在Nb合金表面的吸附能较低,易在合金表面吸附,并逐渐扩散到Nb合金的基体中.氧在合金基体中镶嵌能为负值,氧的态密度和Nb相似,在Nb中具有很高的溶解度.Ti,Al在合金晶内的镶嵌能均高于各自在合金表面的镶嵌能,Ti,Al从合金内部向合金表面扩散,最终在Nb合金表面偏聚,形成富Ti,Al的表层.团簇能计算结果表明Nb合金表面的Ti,Al原子各自均有聚集倾向,分别形成Ti和Al原子团.氧与合金     

ZrMn2（110）表面结构及吸氢机理的第一性原理研究

采用基于密度泛函理论(DFT)的平面波赝势(PW-PP)方法,研究了ZrMn2（110）清洁表面结构和氢原子在表面的吸附。弛豫表面结构的计算结果表明表面结构的最表层为曲面,且表面结构的原子间隙变小。由1Zr2Mn原子组成的空位是氢原子吸附在ZrMn2（110）表面的最佳吸附位,吸附能为3.352 eV,氢原子吸附后离表面的距离为1.140 Å。Mulliken电荷布居分析表明吸附的氢原子与表面原子的相互作用主要是接近氢原子的第一层原子与氢原子的相互作用。过渡态计算表明被吸附的氢原子进入表面内部需克服的最大势垒为1.033 eV。