Gel permeation chromatographic characterization of sodium hyaluronate and its fractions prepared by ultrasonic degradation

Summary High-molecular-weight sodium hyaluronate isolated from rooster combs was degraded by ultrasonication. The molecular weight of hyaluronate and its polydispersity was determined by gel-permeation chromatography. During 75-min treatment the molecular weight value decreased from 1.39×10⁶ Da to 2.25×10⁵ Da while the polydispersity of the molecular weight increased from 1.29 to 2.36. The reciprocal value of the square of the hyaluronate's molecular weight was linearly proportional to the time of ultrasonication.     

Effect of method of solution on observed molecular weight distribution of barley starch and starch derivatives in size exclusion chromatography

Summary Samples of native barley starch and six starch derivatives were suspended (0.1% sample concentration) in four different solvents: the eluent (pH 11 buffer), dimethylsulfoxide, 0.1 M NaOH or 0.5 M NaOH and kept in a boilling water bath for 5 to 60 minutes or shaken for 60 minutes. The average molecular weight values , and the polydispersity value were determined with a TSK PW-type column using narrow standard calibration. Only a small part of the samples dissolved in the eluent. The dissolution of sample in dimethylsulfoxide was dependent on sample type. Of the NaOH solutions, 0.5 M NaOH was the only one that dissolved all the samples. Therefore, 0.5 M NaOH appears to be the solvent of choice for starch molecules.     

Analysis of sodium polycarboxylates in detergents by size exclusion chromatography

Summary This paper describes the quantitative analysis and preparative isolation of sodium polycarboxylates in detergents by means of gel permeation chromatography. An analytical monitoring method separates the polymers from other low molecular detergent ingredients within 10 minutes. There is no separation of the various molecular weight polycarboxylate macromolecules themselves. They elute from the column as a single narrow peak at the exclusion volume. A second preparative gel filtration method allows isolation of polycarboxylates in amounts necessary for further characterization. Appropriate sample pretreatments and possible interferences are discussed.     

Size exclusion chromatographic determination of hydroxypropyl methyl cellulose and polyethylene glycol 400 in an ophthalmic solution

Summary Hydroxypropyl methyl cellulose (HPMC) and polyethylene glycol 400 (PEG 400) content in HypoTears™ Daily Dose ophthalmic solution are determined simultaneously by size exclusion chromatography. The retention times of HPMC and PEG 400 are 10.6 and 15.4 minutes, respectively. The method requires minimal sample pretreatment and is accurate and reproducible. The peak area response from a refractive index detector versus HPMC and PEG 400 concentration is linear over the range of 50–150 % of their label claims of 2.5 mg/mL and 10 mg/mL, respectively. The mean absolute recoveries of HPMC and PEG 400 at their label claim using the described method are 98.9±1.3 % and 100.4±1.2 % (mean±SD, n=12), respectively.     

Size exclusion chromatography of plasmid DNA isoforms

There is considerable interest in using size exclusion chromatography (SEC) to analyze and purify specific plasmid isoforms, but there is currently no fundamental understanding of the effects of plasmid size and morphology on plasmid behavior in SEC. Experiments were performed for plasmids from 3.0 to 17.0 kbp in size. The linear and open-circular isoforms were generated from the supercoiled plasmid by appropriate enzymatic digestion. SEC retention data were obtained using a Sephacryl S-1000 SF resin packed column and an Agilent HPLC system over a range of flow rates using buffers of different ionic strength and composition. The plasmid partition coefficients, K_P, were evaluated from the first statistical moment of the chromatographic peak. The partition coefficient decreased with increasing plasmid size as expected; K_P varied from 0.299 to 0.045 for supercoiled plasmids of 3.0 to 17.0 kbp. The partition coefficient also increased with increasing ionic strength due to the compaction of the DNA associated with the shielding of the intramolecular electrostatic interactions. For any plasmid size, the supercoiled isoform had the highest K_P followed by the open-circular and then the linear isoform, consistent with independent estimates of the plasmid radius of gyration as determined by static light scattering. The experimental data were analyzed using available theoretical models for the partitioning of linear and cyclic polymer chains in well-defined pore geometries. These results provide important insights into the behavior of different plasmid isoforms in size exclusion chromatography.     

Size exclusion chromatography of hepatitis B surface antigen particles

Summary To find the factors responsible for the broadening of the recombinant-hepatitis B surface-antigen peak in size-exclusion chromatography, the purified material was fractionated on preparative scale followed by multiple analysis of the separated fractions. The results from chromatographic analysis suggested the presence of large particle aggregates, probably tubular structures which, however, were not detected by electron microscopy. The antigen particles ranged from 16 to 32 nm in all the fractions, except two last fractions consisting of 16–24 nm particles. The relation ELISA/Lowry increased with increasing the fraction number, being a maximum in the fraction corresponding to the maximum of the chromatographic peak. Probably, the particles which are variable in size differ from each other with respect to the efficiency of protein assembly. Fractions collected in different regions of the peak were adsorbed on alum and injected in mice. The high antibody levels were produced without significant differences in immunogenicity between samples. Presented at the 21^st ISC held in Stuttgart, Germany, 15^th–20^th September, 1996.     

High temperature (70°C) size exclusion chromatography of petroleum waxes with RI and FID detection

Molecular weight distribution of solid petroleum waxes is a key parameter for the general characterization of these materials. Particular interest concerns extremely large components, typically present in oil distillation residua, and solid deposits found in oil production facilities. Molecular weight distributions of oil waxes were determined in this work by high temperature size exclusion chromatography. Separations were carried out with two different eluents, namely toluene and ortho-dichlorobenzene and two detection systems, these being a differential refractive index and a flame ionization detector. Toluene proved to be the best choice when combined with flame ionization detection. Better uniformity of response was the greatest advantage achieved by this approach. The experimental set up permitted analysis of samples containing molecules with up to 138 carbon atoms. Burning properties of very large molecules, isomerism affecting calibration, and signal asymmetry when flame ionization detection was adopted were three issues still requiring additional efforts to understand and to improve analysis accuracy.     

An analytical solution of a newly proposed peak broadening equation and extension of polydispersities to higher molecular weight averages in size exclusion chromatography (SEC)

Summary Herein is reported an analytical solution to the peak broadening or peak dispersion/flattening equation based on the recently proposed Instrumental Spreading Shape Function and its application to correction for imperfect resolution (inadequate peak separation and/or excessive peak broadening) for higher molecular weight averages. The relationship of these higher MW averages with the familiar Weight Average and number average molecular weights is also discussed. Criteria for perfect resolution are specified and a true molecular weight calibration curve is accordingly defined.     

Possibilities and pitfalls in analyzing (upgraded) pyrolysis oil by size exclusion chromatography (SEC)

The applicability of size exclusion chromatography (SEC) to analyze (upgraded) pyrolysis oil samples has been studied using model compounds, pyrolysis oils and hydrodeoxygenated pyrolysis oils. The assumptions needed for the conversion of the chromatogram to the M_w-distribution were validated. It was shown that the conversion of elution volume to molecular weight (based on polystyrene calibration curves) can introduce substantial errors in the prediction of the molecular weight. The conversion of RID response to W(log M) (as plotted on the y-axis of the M_w-distribution) is based on the assumption of a compound independent RID response factor and linear response to concentration. While the latter was shown to be true within the concentration range studied, the former was not true: the RID response factor depends on the type of (upgraded) pyrolysis oil. It was shown that within a single pyrolysis oil sample, the RID response for the low molecular weight fraction was a factor 3 lower than the high molecular weight fraction. Furthermore long term column fouling can influence SEC results that cannot be corrected with regular polystyrene recalibrations.Based on the results we recommend SEC not to be used as a quantitative method for characterization (upgraded) pyrolysis oil samples, but as a tool to compare (upgraded) pyrolysis oil samples, preferably prepared using incremental operating conditions and expected to have similar molecular composition. This work has further shown that (i) the ∫UVDdv/∫RIDdv ratio can be used as an indication of the sum of the relative aromaticity and conjugated double bond content for (upgraded) pyrolysis oil, and (ii) the negative peak area appearing in the low molecular weight part of the chromatogram can be used to estimate the water content of (upgraded) oil samples.     

Size exclusion chromatography – A blessing and a curse of science and technology of synthetic polymers

Size exclusion chromatography, SEC is one of the most popular methods for the separation of different kinds of macromolecules. This critical review gives concise information about macromolecules and their behavior in solution, basic understanding about principles, instrumentation, and application possibilities of SEC, and more in detail discusses drawbacks and pitfalls of the method with the emphasis on synthetic polymers. Selected practical advices are included to help enhance the quality of SEC results.     

Size exclusion chromatography of aluminium species in natural waters

Size exclusion chromatography was used in order to characterize organically bound aluminium in natural water samples. A Superose column was used, with 0.1 M acetate buffer (pH 4.6) as mobile phase. Three detection systems were used; graphite furnace atomic absorption spectrometry, post-column reaction with pyrocatechol violet and UV spectrometry at 254 nm. A single peak was obtained for organic aluminium in natural waters. The results indicated that aluminium binds with a broad size range of humic substances, and that the inorganic aluminium was present in polymeric form.     

Characterization of River Natural Organic Matter by High-Performance Size Exclusion Chromatography

The molecular weight of natural organic matter from the Yeongsan and Seomjin Rivers and the discharge from the wastewater treatment plants were analyzed for seasonal characteristics by high-performance size exclusion chromatography. The distribution of molecular weights demonstrated relationships with microbial activity and seasonal variations with temperature. Dissolved organic carbon and total organic carbon for the Seomjin River were from 1.6 to 3.1 mg L^?1; for the Yeongsan River system, these parameters were between 2.0 and 8.0 mg L^?1. There were no significant differences between upstream and downstream organic matter. The biochemical oxygen demand (0.8–2.5 mg L^?1) for the Seomjin River was less than the chemical oxygen demand (2.9–5.0 mg L^?1). Similarly, the biochemical oxygen demand (0.9–4.6 mg L^?1) for the Yeongsan River was lower than the chemical oxygen demand (3.8–10.6 mg L^?1). The molecular weight of aromatic compounds increased as the water temperature decreased in October, whereas the molecular weights of proteins decreased as the water temperature increased. These results suggest that as microbial activity increased, natural organic matter with a smaller molecular weight may be employed as an energy source by microorganisms. As a result, seasonal variation of the water temperature may influence the distribution of organic matter in the rivers based on molecular weight and microbial activity such that the smaller natural organic matter was more readily degraded by microorganisms.     

Error introduced into determination of pore size distribution by size exclusion chromatography

Simultaneous use of large standard molecules and small particles of the product examined gives rise to errors in pore size determination by size exclusion chromatography. This error is calculated for packings of spherical particles, thus making corrections possible.     

Determination of Morphological Properties of Swellable Solids by Size Exclusion Chromatography

Many technically interesting porous solids, e.g. ion exchangers or adsorbents for catalysis, are swellable polymers, i.e. the pore structure depends on the solvent medium. A method based on exclusion chromatography, permits determination of the pore size and pore size distribution in the swollen state.—Size exclusion chromatography, also referred to as gel permeation, gel filtration, or molecular sieve chromatography, is a widely employed method for the separation of dissolved substances—mostly polymer mixtures—according to their molecular size. Porous solids are used as stationary phase. Conversely, pore sizes and other structural data can be determined by exclusion chromatography. This application requires a series of standards (polymer samples) of known molecular weight. As a simple and rapid method, it has already proven valuable for such determinations in the case of rigid solids; in the case of swellable solids, this constitutes the sole method by which the pore structure can be characterized: classical methods require dry samples.     

Studies on molecular weight distribution of carbon fiber polymer precursors synthesized using mixed solvents

The molecular weight distributions were estimated for carbon fiber polymer precursors such as poly（acrylonitrile-co -itaconic acid） synthesized by semi batch solution polymerization in mixed solvents media with the azonitrile compounds as initiator under the different ratios of solvent and non solvent from 0.75 to 2.5 in weight.The copolymer was characterized by using Fourier transform infrared spectroscopy（FTIR） and nuclear magnetic resonance（¹H-NMR） analyses.The molecular weight distributions were evaluated by M_v/M_n ratios estimated from viscosity and osmotic measurements,and M_w/M_n estimated from size exclusion chromatography.The molecular weight distributions of these polymers as determined from M_v/M_n and M_w/M_n are 2.9 to 3.2 and 2.0 to 2.5 respectively.The molecular distributions were close to a narrow distribution of 2.0 when the solvent/non-solvent ratio was varied between 1.4 and 2.0.Intrinsic viscosity[?]as a function of molecular weight of poly（acrylonitrile-co-itaconic acid） was evaluated by means of low angle laser light scattering with size exclusion chromatography（SEC-LALLS） and viscometry with SEC（SEC-VISCO）.The relationship between[?]and M_w for poly（acrylonitrile-co-itaconic acid） in DMF at 50℃was[?]= 1.1×10^-5M_w^0.79,where[?]is obtained in dL/g.     

Size‐exclusion chromatography for the determination of the boiling point distribution of high‐boiling petroleum fractions

The paper describes a new procedure for the determination of boiling point distribution of high‐boiling petroleum fractions using size‐exclusion chromatography with refractive index detection. Thus far, the determination of boiling range distribution by chromatography has been accomplished using simulated distillation with gas chromatography with flame ionization detection. This study revealed that in spite of substantial differences in the separation mechanism and the detection mode, the size‐exclusion chromatography technique yields similar results for the determination of boiling point distribution compared with simulated distillation and novel empty column gas chromatography. The developed procedure using size‐exclusion chromatography has a substantial applicability, especially for the determination of exact final boiling point values for high‐boiling mixtures, for which a standard high‐temperature simulated distillation would have to be used. In this case, the precision of final boiling point determination is low due to the high final temperatures of the gas chromatograph oven and an insufficient thermal stability of both the gas chromatography stationary phase and the sample. Additionally, the use of high‐performance liquid chromatography detectors more sensitive than refractive index detection allows a lower detection limit for high‐molar‐mass aromatic compounds, and thus increases the sensitivity of final boiling point determination.     

A chromatographic comparison of the pore structure of zirconia high performance liquid chromatographic materials made by the polymerization induced colloidal aggregation and the Oil Emulsion methods

Summary The pore structures of zirconium oxide particles prepared by two different methods (PICA and Oil Emulsion processes) are compared. Nitrogen sorptometry and size exclusion chromatography are used to characterize the two different types of particles. Significant and unexpected differences were found in the accessible pore volumes and the bed packing densities of the two materials. The PICA material was found to have a higher totally included and totally excluded volume than would be normally expected. The chromatographic method provides results which are more useful for the application of these materials to separation sciences.     

Size exclusion and anion exchange high performance liquid chromatography for characterizing metals bound to marine dissolved organic matter

Size exclusion chromatography (SEC) followed by anion exchange chromatography (AEC) hyphenated with inductively coupled plasma-mass spectrometry (ICP-MS) was applied for fractionating metals bound to marine dissolved organic matter (DOM). Surface seawater samples (100 L) were subjected to tangential flow ultrafiltration (10,000 Da cut off) for isolating and pre-concentrating dissolved large molecules. The isolated fraction (retentate) consisted of 1 L, which was further freeze-dried and re-dissolved to 250 mL with ultrapure water. After HI Trap desalting of the re-dissolved retentate, SEC with UV detection showed marine DOM ranging from 6.5 kDa (lower than the permeable volume of the SEC column) to 16 kDa. A further characterization of this fraction by AEC with UV detection revealed the existence of four groups of macromolecules exhibiting retention times of 2.3, 2.8, 4.5 and 14.0 min. AEC hyphenated with ICP-MS showed the presence of strontium and zinc in the first AE fraction isolated from the SEC fraction; while manganese was found to be bound to the second AE fraction. Cobalt was found to be bound to molecules comprising the third AE fraction.     

Automated sample cleanup using on-line coupling of size exclusion chromatography to high resolution gas chromatography

A fully automated on-line sample cleanup system based on the coupling of size exclusion chromatography to high resolution gas chromatography is described. The transfer technique employed is based on fully concurrent solvent evaporation using a loop-type interface, early vapor exit and co-solvent trapping. Optimization of the LC-GC transfer was done visually via an all-glass oven door. To circumvent the problem of mixing within the injection loop, an adaptation was made to the standard loop-type interface. The determination of a series of additives in a polymer matrix is presented as one example of the vast range of applications opened up by this technique.