Dinuclear Zinc Hydride Supported by an Anionic Bis(N‐Heterocyclic Carbene) Ligand

Methylene‐linked bis(N,N′‐di‐tert‐butylimidazol‐2‐ylidene) 1 reacted with diethylzinc to give dinuclear zinc ethyl compound 2 , which contains a formally anionic bis(carbene) ligand as a result of deprotonation of the methylene bridge. The reaction of 2 with PhSiH₃ gave the phenylsilyl compound 3 . The zinc hydride 4 was obtained by the reaction of 2 with LiAlH₄ or Ph₃SiOH followed by treatment with PhSiH₃. X‐ray diffraction studies show that compounds 2 , 3 , and 4 all have a similar dimeric structure with D_2h symmetry. The reaction of hydride 4 with carbon dioxide and N,N′‐diisopropylcarbodiimide gave formato ( 5 ) and formamidinato ( 7 ) derivatives as a result of the insertion of the heterocumulene into both Zn? H bonds. Reaction with Ph₂CO gave the diphenylmethoxy compound 6 . Hydride 4 shows catalytic activity in the hydrosilylation of 1,1‐diphenylethylene and methanolysis of silanes.     

Calcium Hydride Catalyzed Highly 1,2‐Selective Pyridine Hydrosilylation

Reaction of the calcium hydride complex (DIPPnacnac‐CaH?THF)₂ with pyridine is much faster and selective than that of the corresponding magnesium hydride complex (DIPPnacnac = [(2,6‐iPr₂C₆H₃)NC(Me)]₂CH). With a range of pyridine, picoline and quinoline substrates, exclusive transfer of the hydride ligand to the 2‐position is observed and also at higher temperatures no 1,2→1,4 isomerization is found. The heteroleptic product DIPPnacnac‐Ca(1,2‐dihydropyridide)?(pyridine) shows fast ligand exchange into homoleptic calcium complexes and therefore could not be isolated. Calcium hydride reduction of isoquinoline gave well‐defined homoleptic products which could be characterized by X‐ray diffraction: Ca(1,2‐dihydroisoquinolide)₂?(isoquinoline)₄ and Ca₃(1,2‐dihydroisoquinolide)₆?(isoquinoline)₆. The striking selectivity difference in the dearomatization of pyridines by Mg or Ca complexes could be explained by DFT theory and was utilized in catalysis. Whereas hydroboration of pyridine with pinacol borane with a calcium hydride catalyst gave only minor conversion, the hydrosilylation of pyridine and quinolines with PhSiH₃ yields exclusively 1,2‐dihydropyridine and 1,2‐dihydroquinoline silanes with 80–90 % conversion. Similar results can be achieved with the catalyst Ca[N(SiMe₃)₂]₂?(THF)₂. These calcium complexes represent the first catalysts for the 1,2‐selective hydrosilylation of pyridines.     

Hückel's Rule of Aromaticity Categorizes Aromatic closo Boron Hydride Clusters

A direct connection is established between three‐dimensional aromatic closo boron hydride clusters and planar aromatic [n]annulenes for medium and large boron clusters. In particular, the results prove the existence of a link between the two‐dimensional Hückel rule, as followed by aromatic [n]annulenes, and Wade–Mingos’ rule of three‐dimensional aromaticity, as applied to the aromatic [B_nH_n]^2? closo boron hydride clusters. The closo boron hydride clusters can be categorized into different series, according to the n value of the Hückel (4 n+2) π rule. The distinct categories studied in this work correspond to n=1, 2, and 3. Each category increases in geometrical difficulty but, more importantly, it is possible to associate each category with the number of pentagonal layers in the structure perpendicular to the main axis. Category 1 has one pentagonal layer, category 2 has two, and category 3 has three.     

Crystal Structure and Formation of TlPd3 and its new Hydride TlPd3H

TlPd₃ was synthesised from the elements in evacuated silica tubes at 600 °C. Alternatively, TlPd₃ was yielded by reduction of TlPd₃O₄ in N₂ gas atmosphere. Reduction of the oxide in H₂ gas atmosphere resulted in the formation of the new hydride TlPd₃H. The structure of tetragonal TlPd₃ (ZrAl₃ type, space group I4/mmm, a = 410.659(9) pm, c = 1530.28(4) pm) was reinvestigated by X‐ray and also by neutron powder diffraction as well as the structure of its previously unknown hydride TlPd₃H (cubic anti‐perovskite type structure, space group Pm\bar{3} m, a = 406.313(1) pm). In situ DSC measurements of TlPd₃ in hydrogen gas atmosphere showed a broad exothermic signal over a wide temperature range with two maxima at 280 °C and at 370 °C, which resulted in the product TlPd₃H. A dependency of lattice parameters of the intermetallic phase on reaction conditions is observed and discussed. Results of hydrogenation experiments at room temperature with gas pressures up to 280 bar hydrogen and at elevated temperatures with very low hydrogen gas pressures (1–2 bar) as well as results of dehydrogenation of the hydrides under vacuum will be discussed.     

Kinetics of Hydride Abstractions from 2‐Arylbenzimidazolines

The rates of the hydride abstractions from the 2‐aryl‐1,3‐dimethyl‐benzimidazolines 1a – f by the benzhydrylium tetrafluoroborates 3a – e were determined photometrically by the stopped‐flow method in acetonitrile at 20 °C. The reactions follow second‐order kinetics, and the corresponding rate constants k₂ obey the linear free energy relationship log k₂(20 °C)= s(N+E), from which the nucleophile‐specific parameters N and s of the 2‐arylbenzimidazolines 1a – c have been derived. With nucleophilicity parameters N around 10, they are among the most reactive neutral C? H hydride donors which have so far been parameterized. The poor correlation between the rates of the hydride transfer reactions and the corresponding hydricities (ΔH⁰) indicates variable intrinsic barriers.     

Nucleophilic Aromatic Substitution at Benzene with Powerful Strontium Hydride and Alkyl Complexes

Key to the isolation of the first alkyl strontium complex was the synthesis of a strontium hydride complex that is stable towards ligand exchange reactions. This goal was achieved by using the super bulky β‐diketiminate ligand ^DIPePBDI (CH[C(Me)N‐DIPeP]₂, DIPeP=2,6‐diisopentylphenyl). Reaction of ^DIPePBDI‐H with Sr[N(SiMe₃)₂]₂ gave (^DIPePBDI)SrN(SiMe₃)₂, which was converted with PhSiH₃ into [(^DIPePBDI)SrH]₂. Dissolved in C₆D₆, the strontium hydride complex is stable up to 70 °C. At 60 °C, H–D isotope exchange gave full conversion into [(^DIPePBDI)SrD]₂ and C₆D₅H. Since H–D exchange with D₂ is facile, the strontium hydride complex served as a catalyst for the deuteration of C₆H₆ by D₂. Reaction of [(^DIPePBDI)SrH]₂ with ethylene gave [(^DIPePBDI)SrEt]₂. The high reactivity of this alkyl strontium complex is demonstrated by facile ethylene polymerization and nucleophilic aromatic substitution with C₆D₆, giving alkylated aromatic products and [(^DIPePBDI)SrD]₂.     

Well‐Defined Molecular Magnesium Hydride Clusters: Relationship between Size and Hydrogen‐Elimination Temperature

A new tetranuclear magnesium hydride cluster, [{ NN ‐(MgH)₂}₂], which was based on a N? N‐coupled bis‐β‐diketiminate ligand ( NN ^2?), was obtained from the reaction of [{ NN ‐(MgnBu)₂}₂] with PhSiH₃. Its crystal structure reveals an almost‐tetrahedral arrangement of Mg atoms and two different sets of hydride ions, which give rise to a coupling in the NMR spectrum (J=8.5 Hz). To shed light on the relationship between the cluster size and H₂ release, the thermal decomposition of [{ NN ‐(MgH)₂}₂] and two closely related systems that were based on similar ligands, that is, an octanuclear magnesium hydride cluster and a dimeric magnesium hydride species, have been investigated in detail. A lowering of the H₂‐desorption temperature with decreasing cluster size is observed, in line with previously reported theoretical predictions on (MgH₂)_n model systems. Deuterium‐labeling studies further demonstrate that the released H₂ solely originates from the oxidative coupling of two hydride ligands and not from other hydrogen sources, such as the β‐diketiminate ligands. Analysis of the DFT‐computed electron density in [{ NN ‐(MgH)₂}₂] reveals a counterintuitive interaction between two formally closed‐shell H^? ligands that are separated by 3.106 Å. This weak interaction could play an important role in H₂ desorption. Although the molecular product after H₂ release could not be characterized experimentally, DFT calculations on the proposed decomposition product, that is, the low‐valence tetranuclear Mg(I) cluster [( NN ‐Mg₂)₂], predict a structure with two almost‐parallel, localized Mg? Mg bonds. As in a previously reported β‐diketiminate Mg^I dimer, the Mg? Mg bond is not characterized by a bond critical point, but instead displays a local maximum of electron density midway between the atoms, that is, a non‐nuclear attractor (NNA). Interestingly, both of the NNAs in [( NN ‐Mg₂)₂] are connected through a bond path that suggests that there is bonding between all four Mg^I atoms.     

The Photochemistry of Thymine in Frozen Aqueous Solution: Trimeric and Minor Dimeric Products

Early work identified three compounds, namely the c,s cyclobutane dimer, the so‐called (6‐4) photoproduct (5‐hydroxy‐6‐4′‐(5‐methylpyrimidin‐2′‐one)‐5,6‐dihydrothymine) and a trimer hydrate, as products formed upon UV irradiation of thymine in frozen aqueous solution. More recent work has shown that an (α‐4) product, namely α‐4′‐(5′‐methylpyrimidine‐2′‐one)‐thymine, is a likely product formed under these reaction conditions. During a thorough reinvestigation of the photochemistry of Thy in ice at ?78.5°C, we found that a variety of other products could be detected. In addition to the c,s dimer, the other three known cyclobutane dimers, namely the c,a, t,s and t,a forms, are produced, although in considerably smaller amounts. The so‐called “spore product” of thymine (5,6‐dihydro‐5‐(α‐thyminyl)thymine) is likewise formed. Two other dimers have been identified as minor products; one of these has been determined to be 5‐(thymin‐3‐yl)‐5,6‐dihydrothymine and the other has been tentatively assigned to be a (5‐4) adduct (6‐hydroxy‐5‐4′‐(5‐methylpyrimidin‐2′‐one)‐5,6‐dihydrothymine). Compounds with the behavior expected of true trimeric compounds have been isolated via HPLC and characterized by mass spectrometry and photochemical behavior. One of these materials, putatively containing an oxetane ring, decomposes thermally to a secondary trimeric product that is then converted into the known trimer hydrate.     

Synthetic,Mechanistic, and Theoretical Studies on the Generation of Iridium Hydride Alkylidene and Iridium Hydride Alkene Isomers

Experimental and theoretical studies on equilibria between iridium hydride alkylidene structures, [(Tp^Me2)Ir(H){?C(CH₂R)ArO }] (Tp^Me2=hydrotris(3,5‐dimethylpyrazolyl)borate; R=H, Me; Ar=substituted C₆H₄ group), and their corresponding hydride olefin isomers, [(Tp^Me2)Ir(H){R(H)C? C(H)OAr}], have been carried out. Compounds of these types are obtained either by reaction of the unsaturated fragment [(Tp^Me2)Ir(C₆H₅)₂] with o‐C₆H₄(OH)CH₂R, or with the substituted anisoles 2,6‐Me₂C₆H₃OMe, 2,4,6‐Me₃C₆H₂OMe, and 4‐Br‐2,6‐Me₂C₆H₂OMe. The reactions with the substituted anisoles require not only multiple C? H bond activation but also cleavage of the Me? OAr bond and the reversible formation of a C? C bond (as revealed by ¹³C labeling studies). Equilibria between the two tautomeric structures of these complexes were achieved by prolonged heating at temperatures between 100 and 140 °C, with interconversion of isomeric complexes requiring inversion of the metal configuration, as well as the expected migratory insertion and hydrogen‐elimination reactions. This proposal is supported by a detailed computational exploration of the mechanism at the quantum mechanics (QM) level in the real system. For all compounds investigated, the equilibria favor the alkylidene structure over the olefinic isomer by a factor of between approximately 1 and 25. Calculations demonstrate that the main reason for this preference is the strong Ir–carbene interactions in the carbene isomers, rather than steric destabilization of the olefinic tautomers.     

Alcoholysis of Al2(OtBu)6 – Synthesis and Crystal Structure of Al9O3(OEt)21

When Al₂(OtBu)₆ is treated with ethanol, Al₉O₃(OEt)₂₁ ( 1 ) is obtained, which is a missing link in the series of polynuclear aluminum alkoxides. Alcoholysis of Al₂(OtBu)₆ in 2‐propanol yields the well‐known homoleptic compound Al₄(OiPr)₁₂ ( 2 ). As recently published, similar reactions with Fe₂(OtBu)₆ gave different structures. However, there are recurring structural patterns from alkoxide chemistry found. For a deeper understanding of this hardly predictable chemistry, compounds have to be correlated by such common structural motifs. We briefly report the syntheses of 1 and 2 and the crystal structure of 1 . In addition, we provide an improved synthetic procedure for the preparation of the precursor Al₂(OtBu)₆. The structure of the new compound 1 is comprehensively compared to related structures from literature.     

Synthesis and Diverse Transformations of a Dinitrogen Dititanium Hydride Complex Bearing Rigid Acridane‐Based PNP‐Pincer Ligands

Studies on N₂ activation and transformation by transition metal hydride complexes are of particular interest and importance. The synthesis and diverse transformations of a dinitrogen dititanium hydride complex bearing the rigid acridane‐based ^acriPNP‐pincer ligands {[(^acriPNP)Ti]₂(μ₂‐η¹:η²‐N₂)(μ₂‐H)₂} are presented. This complex enabled N₂ cleavage and hydrogenation even without additional H₂ or other reducing agents. Furthermore, diverse transformations of the N₂ unit with a variety of organometallic compounds such as ZnMe₂, MgMe₂, AlMe₃, B(C₆F₅)₃, PinBH, and PhSiH₃ have been well established at the rigid ^acriPNP‐ligated dititanium framework, such as reversible bonding‐mode change between the end‐on and side‐on/end‐on fashions, diborylative N=N bond cleavage, the formal insertion of two dimethylaluminum species into the N=N bond, and the formal insertion of two silylene units into the N=N bond. This work has revealed many unprecedented aspects of dinitrogen reaction chemistry.     

Counterion Dependence of Dinitrogen Activation and Functionalization by a Diniobium Hydride Anion

We report the synthesis of anionic diniobium hydride complexes with a series of alkali metal cations (Li⁺, Na⁺, and K⁺) and the counterion dependence of their reactivity with N₂. Exposure of these complexes to N₂ initially produces the corresponding side‐on end‐on N₂ complexes, the fate of which depends on the nature of countercations. The lithium derivative undergoes stepwise migratory insertion of the hydride ligands onto the aryloxide units, yielding the end‐on bridging N₂ complex. For the potassium derivative, the N?N bond cleavage takes place along with H₂ elimination to form the nitride complex. Treatment of the side‐on end‐on N₂ complex with Me₃SiCl results in silylation of the terminal N atom and subsequent N?N bond cleavage along with H₂ elimination, giving the nitride‐imide‐bridged diniobium complex.     

Formation of the First Trimeric Monoterpenoid Indole Alkaloids

Under O², the Aspidosperma alkaloid tabersonine ( 1 ) was converted by a crude enzyme preparation from leaves of mature plants of Catharanthus roseus G DON into the trimeric 3-hydroxy-14′-(3α″-tabersonyl)voafrine B ( 4 ) which was easily reduced by NaBH₄ to 14′-(3α″-tabersonyl)voafrine B ( = tertabersonine; 5 ). Compounds such as 4 and 5 are the first trimeric alkaloids in the series of monoterpenoid indole alkaloids.     

Chinese Puzzle Molecule: A 15 Hydride, 28 Copper Atom Nanoball

The syntheses of the first rhombicuboctahedral copper polyhydride complexes [Cu₂₈(H)₁₅(S₂CNR)₁₂]PF₆ (NR=NⁿPr₂ or aza‐15‐crown‐5) are reported. These complexes were analyzed by single‐crystal X‐ray and one by neutron diffraction. The core of each copper hydride nanoparticle comprises one central interstitial hydride and eight outer‐triangular‐face‐capping hydrides. A further six face‐truncating hydrides form an unprecedented bridge between the inner and outer copper atom arrays. The irregular inner Cu₄ tetrahedron is encapsulated within the Cu₂₄ rhombicuboctahedral cage, which is further enclosed by an array of twelve dithiocarbamate ligands that subtends the truncated octahedron of 24 sulfur atoms, which is concentric with the Cu₂₄ rhombicuboctahedron and Cu₄ tetrahedron about the innermost hydride. For these compounds, an intriguing, albeit limited, H₂ evolution was observed at room temperature, which is accompanied by formation of the known ion [Cu₈(H)(S₂CNR)₆]⁺ upon exposure of solutions to sunlight, under mild thermolytic conditions, and on reaction with weak (or strong) acids.     

YIHn: A New Family of Metal‐rich Hydride Halides

The graphite‐like yttrium hydride halides, YIH_n (0.8 ? n ? 1.0), have been prepared in quantitative yields by heating either YI₃, YH₂ (1:2) or stoichiometric YI₃, YH₂, Y mixtures in sealed Ta ampoules at 900°C. A lower limit of the homogeneity range, n ≈ 2/3, has been determined from dehydrogenation experiments. All YIH_n phases adopt the ZrBr‐type heavy‐atom structure. The hydrogen variation is accompanied by a change in the c lattice constant from 31.162(3) to 31.033(1) Å for n = 0.61(3) to 1.02(3). The YIH_n phases reversibly react with hydrogen at 400‐600°C to form the light green transparent compound YIH₂. However, increasing the reaction temperature above 700°C causes decomposition to an unidentified phase being in equilibrium with YH₂ and YI₃. The arrangement of the heavy atoms in YIH₂ (P m1; a = 3.8579(3) Å, c = 10.997(1) Å) corresponds to a four‐layer I‐Y‐Y‐I slab with the stacking sequence (AbaB) as was found by x‐ray powder diffraction data refinement with the Rietveld method. A miscibility gap exists between YIH and YIH₂. Samples YIH_n (n ? 1.0) show metallic conductivity at room temperature, which changes into semiconducting behavior with decreasing temperature as n approaches its lower value ≈ 2/3.     

The Formation of Surface Lithium–Iron Ternary Hydride and its Function on Catalytic Ammonia Synthesis at Low Temperatures

Lithium hydride (LiH) has a strong effect on iron leading to an approximately 3 orders of magnitude increase in catalytic ammonia synthesis. The existence of lithium–iron ternary hydride species at the surface/interface of the catalyst were identified and characterized for the first time by gas‐phase optical spectroscopy coupled with mass spectrometry and quantum chemical calculations. The ternary hydride species may serve as centers that readily activate and hydrogenate dinitrogen, forming Fe‐(NH₂)‐Li and LiNH₂ moieties—possibly through a redox reaction of dinitrogen and hydridic hydrogen (LiH) that is mediated by iron—showing distinct differences from ammonia formation mediated by conventional iron or ruthenium‐based catalysts. Hydrogen‐associated activation and conversion of dinitrogen are discussed.     

Nitrogen‐Rich Compounds of the Lanthanoids: Highlights and Summary

In this third part of our research on the 5,5′‐azobis[1H‐tetrazol‐1‐ides] (ZT) of the lanthanoids, we present two compounds with La₂(ZT)₃ moieties with very different coordination modes between the cations and the anions. One La₂(ZT)₃‐containing compound is interesting, because it contains trimeric La₃(ZT)₃^III cations, which are arranged in a windmill‐like structure. Moreover, the first double salt of a ZT compound, namely the carbonate compound La₂(ZT)₂(CO₃)?12 H₂O, is presented and discussed. Another highlight of nitrogen chemistry is the first molecular structure of a 5‐azido‐2H‐tetrazole (CHN₇) molecule, in the form of the spectacular compound Dy₂(ZT)₃?4 CHN₇?24 H₂O. This is the first known complete molecular structure of an azidotetrazole molecule (the organic molecule with the highest nitrogen‐content: 88.3% N). All compounds have been characterized completely including elemental analyses, vibrational (IR and Raman) spectroscopy, and X‐ray crystal‐structure determination. We summarize our ‘nitrogen‐rich compounds of the lanthanoids’ project and extensively discuss selected literature on this topic and compare previously published results with ours.     

CH Bond Activation with Triel Metals: Indium and Gallium Zwitterions through Internal Hydride Abstraction in Rigid Salan Ligands

The hydropyrimidine salan (salan=N,N′‐dimethyl‐N,N′‐bis[(2‐hydroxyphenyl)methylene]‐1,2‐diaminoethane) proteo‐ligands with a rigid backbone {ON^(CH₂)^NO}H₂ react with M(CH₂SiMe₃)₃ (M=Ga, In) to yield the zwitterions {ON^(CH⁺)^NO}M^?(CH₂SiMe₃)₂ (M=Ga, 2 ; In, 3 ) by abstraction of a hydride from the ligand backbone followed by elimination of dihydrogen. By contrast, with Al₂Me₆, the neutral‐at‐metal bimetallic complex [{ON^(CH₂)^NO}AlMe]₂ ( [1]₂ ) is obtained quantitatively. The formation of indium zwitterions is also observed with sterically more encumbered ligands containing o‐Me substituents on the phenolic rings, or an N (CHPh) N moiety in the heterocyclic core. Overall, the ease of C?H bond activation follows the order Al?Ga<In. Experimental data based on model complexes, XRD studies, and ²H NMR spectroscopy show that the formation of the Ga/In zwitterion involves rapid release of SiMe₄ followed by evolution of H₂, and suggest the formation of a transient metal‐hydride species. DFT calculations indicate that the systems {ON^(CH₂)^NO}H₂+M(CH₂SiMe₃)₃ (M=Al, Ga, In) all initially lead to the formation of the neutral monophenolate dihydrocarbyl species through a single protonolysis. From here, the thermodynamic product, the model neutral‐at‐metal complex 1 , is formed in the case of aluminum after a second protonolysis. On the other hand, lower activation energy pathways lead to the generation of zwitterionic complexes 2 and 3 in the cases of gallium and indium, and the formation of these zwitterions obeys a strict kinetic control; the computations suggest that, as inferred from the experimental data, the reaction proceeds through an instable metal‐hydride species, which could not be isolated synthetically.     

Chemistry of Guanidinate‐Stabilised Diboranes: Transition‐Metal‐Catalysed Dehydrocoupling and Hydride Abstraction

Herein, we analyse the catalytic boron–boron dehydrocoupling reaction that leads from the base‐stabilised diborane(6) [H₂B(hpp)]₂ (hpp=1,3,4,6,7,8‐hexahydro‐2H‐pyrimido[1,2‐a]pyrimidinate) to the base‐stabilised diborane(4) [H₂B(hpp)]₂. A number of potential transition‐metal precatalysts was studied, including transition‐metal complexes of the product diborane(4). The synthesis and structural characterisation of two further examples of such complexes is presented. The best results for the dehydrocoupling reactions were obtained with precatalysts of Group 9 metals in the oxidation state of +I. The active catalyst is formed in situ through a multistep process that involves reduction of the precatalyst by the substrate [H₂B(hpp)]₂, and mechanistic investigations indicate that both heterogeneous and (slower) homogeneous reaction pathways play a role in the dehydrocoupling reaction. In addition, hydride abstraction from [H₂B(hpp)]₂ and related diboranes is analysed and the possibility for subsequent deprotonation is discussed by probing the protic character of the cationic boron–hydrogen compounds with NMR spectroscopic analysis.     

Unexpected Direct Hydride Transfer Mechanism for the Hydrogenation of Ethyl Acetate to Ethanol Catalyzed by SNS Pincer Ruthenium Complexes

The hydrogenation of ethyl acetate to ethanol catalyzed by SNS pincer ruthenium complexes was computationally investigated by using DFT. Different from a previously proposed mechanism with fac‐[(SNS)Ru(PPh₃)(H)₂] ( 5′ ) as the catalyst, an unexpected direct hydride transfer mechanism with a mer‐SNS ruthenium complex as the catalyst, and two cascade catalytic cycles for hydrogenations of ethyl acetate to aldehyde and aldehyde to ethanol, is proposed base on our calculations. The new mechanism features ethanol‐assisted proton transfer for H₂ cleavage, direct hydride transfer from ruthenium to the carbonyl carbon, and C?OEt bond cleavage. Calculation results indicate that the rate‐determining step in the whole catalytic reaction is the transfer of a hydride from ruthenium to the carbonyl carbon of ethyl acetate, with a total free energy barrier of only 26.9 kcal mol^?1, which is consistent with experimental observations and significantly lower than the relative free energy of an intermediate in a previously postulated mechanism with 5′ as the catalyst.