Synthesis and Spectroscopic Properties of PdII and PtII Complexes with Monosulfide and Monoselenide Bis(phosphanyl)amine Ligands

Oxidation of N,N‐bis(diphenylphosphanyl)naphthalen‐1‐amine ( 1 ) with elemental sulfur or gray selenium (1:1 molar ratio) gave the corresponding monosulfide and monoselenide bis(phosphanyl)amine ligands C₁₀H₇‐1‐N(P(E)Ph₂)(PPh₂) [E = S ( 2 ), Se ( 3 )], respectively. Reactions of 2 and 3 with MCl₂(cod) (M = Pd, Pt) afforded [MCl₂{ 2 ‐κ²P,S}] [M = Pd( 4 ), Pt( 5 )] and [MCl₂{ 3 ‐κ²P,Se}] [M = Pd( 6 ), Pt( 7 )], respectively. In contrast, reactions of the same ligands with NiCl₂(PPh₃)₂ resulted in deselenization and desulfurization, producing complex 8 with the formula [NiCl₂{1‐κ²P,P}]. Ligands 2 and 3 , as well as their complexes 4 – 7 and 8 were identified and characterized by multinuclear NMR (¹H, ¹³C, ³¹P, and ⁷⁷Se NMR) spectroscopy, elemental analysis, and IR spectroscopy. Additionally, the molecular structure of 8 was obtained.     

The Butterfly Complex [{Cp*Cr(CO)3}2(μ,η1:1-P4)] as a Versatile Ligand and Its Unexpected P1/P3 Fragmentation

The versatile coordination behavior of the P₄ butterfly complex [{Cp*Cr(CO)₃}₂(μ,η^1:1-P₄)] ( 1 ) towards Lewis acidic pentacarbonyl compounds of Cr, Mo and W is reported. The reaction of 1 with [W(CO)₄(nbd)] (nbd=norbornadiene) yields the complex [{Cp*Cr(CO)₃}₂(μ₃,η^1:1:1:1-P₄){W(CO)₄}] ( 2 ) in which 1 serves as a chelating P₄ butterfly ligand. In contrast, reactions of 1 with [M(CO)₄(nbd)] (M=Cr ( a ), Mo ( b )) result in the step-wise formation of [{Cp*Cr(CO)₂}₂(μ₃,η^3:1:1-P₄){M(CO)₅}] ( 3 a,b ) and [{Cp*Cr(CO)₂}₂-(μ₄,η^3:1:1:1-P₄){M(CO)₅}₂] ( 4 a,b ) which contain a folded cyclo-P₄ unit. Complex 4 a undergoes an unprecedented P₁/P₃-fragmentation yielding the cyclo-P₃ complex [Cp*Cr(CO)₂(η³-P₃)] ( 5 ) and the as yet unknown phosphinidene complex [Cp*Cr(CO)₂{Cr(CO)₅}₂(μ₃-P)] ( 6 ). The identity of 6 is confirmed by spectroscopic methods and by the in situ formation of [{Cp*Cr(CO)₂(tBuNC)}P{Cr(CO)₅}₂(tBuNC)] ( 7 ). DFT calculations throw light on the bonding situation of the reported products.     

Photochemical reactions of M(CO)6 (M = Cr,Mo, W) with Ph2P(S)P(S)Ph2

New complexes {M(CO)₄[Ph₂P(S)P(S)Ph₂]} (M = Cr, Mo and W), (1a)–(3a), [(1a), M = Cr; (2a), M = Mo; (3a), M = W] and {M₂(CO)₁₀[-Ph₂P(S)P(S)Ph₂]} (M = Cr, Mo, W), [(1b)–(3b) [(1b), M = Cr; (2b), M = Mo; (3b), M = W]] have been prepared by the photochemical reaction of M(CO)₆ with Ph₂P(S)P(S)Ph₂ and characterized by elemental analyses, f.t.-i.r. and ³¹P-(¹H)-n.m.r. spectroscopy and by FAB-mass spectrometry. The spectra suggest cis-chelate bidentate coordination of the ligand in {M(CO)₄[Ph₂P(S)P(S)Ph₂]} and cis-bridging bidentate coordination of the ligand between two metals in (M = Cr, Mo and W).     

Chalcogen-capped ruthenium carbonyl clusters derived from diphosphazane mono- and dichalcogenides of the type X2P(E)N(R)PX2 and X2P(E)N(R)P(E)X2 (E = S or Se)

Reactions of Ru₃(CO)₁₂ with diphosphazane monoselenides Ph₂PN(R)P(Se)Ph₂ [R = (S)-∗CHMePh (L⁴), R = CHMe₂ (L⁵)] yield mainly the selenium bicapped tetraruthenium clusters [Ru₄(μ₄-Se)₂(μ-CO)(CO)₈{μ-P,P-Ph₂PN(R)PPh₂}] (1, 3). The selenium monocapped triruthenium cluster [Ru₃(μ₃-Se)(μ_sb-CO)(CO)₇{κ²-P,P-Ph₂PN((S)-∗CHMePh)PPh₂}] (2) is obtained only in the case of L⁴. An analogous reaction of the diphosphazane monosulfide (PhO)₂PN(Me)P(S)(OPh)₂ (L⁶) that bears a strong π-acceptor phosphorus shows a different reactivity pattern to yield the triruthenium clusters, [Ru₃(μ₃-S)(μ₃-CO)(CO)₇{μ-P,P-(PhO)₂PN(Me)P(OPh)₂}] (9) (single sulfur transfer product) and [Ru₃(μ₃-S)₂(CO)₅{κ²-P,P-(PhO)₂PN(Me)P(OPh)₂}{μ-P,P-(PhO)₂PN(Me)P(OPh)₂}] (10) (double sulfur transfer product). The reactions of diphosphazane dichalcogenides with Ru₃(CO)₁₂ yield the chalcogen bicapped tetraruthenium clusters [Ru₄(μ₄-E)₂(μ-CO)(CO)₈{μ-P,P-Ph₂PN(R)PPh₂}] [R = (S)-∗CHMePh, E = S (6); R = CHMe₂, E = S (7); R = CHMe₂, E = Se (3)]. Such a tetraruthenium cluster [Ru₄(μ₄-S)₂(μ- CO)(CO)₈{μ-P,P-(PhO)₂PN(Me)P(OPh)₂}] (11) is also obtained in small quantities during crystallization of cluster 9. The dynamic behavior of cluster 10 in solution is probed by NMR studies. The structural data for clusters 7, 9, 10 and 11 are compared and discussed.     

Synthese,Struktur und Reaktivität von η3‐1,2‐Diphosphaallylkomplexen sowie von [{(η5‐C5H5)(CO)2W–Co(CO)3}{μ‐AsCH(SiMe3)2}(μ‐CO)]

Syntheses, Structure and Reactivity of η³‐1,2‐Diphosphaallyl Complexes and [{(η⁵‐C₅H₅)(CO)₂W–Co(CO)₃}{μ‐AsCH(SiMe₃)₂}(μ‐CO)] Reaction of ClP=C(SiMe₂iPr)₂ ( 3 ) with Na[Mo(CO)₃(η⁵‐C₅H₅)] afforded the phosphavinylidene complex [(η⁵‐C₅H₅)(CO)₂Mo=P=C(SiMe₂iPr)₂] ( 4 ) which in situ was converted into the η¹‐1,2‐diphosphaallyl complex [η⁵‐(C₅H₅)(CO)₂Mo{η³‐tBuPPC(SiMe₂iPr)₂] ( 6 ) by treatment with the phosphaalkene tBuP=C(NMe₂)₂. The chloroarsanyl complexes [(η⁵‐C₅H₅)(CO)₃M–As(Cl)CH(SiMe₃)₂] [where M = Mo ( 9 ); M = W ( 10 )] resulted from the reaction of Na[M(CO)₃(η⁵‐C₅H₅)] (M = Mo, W) with Cl₂AsCH(SiMe₃)₂. The tungsten derivative 10 and Na[Co(CO)₄] underwent reaction to give the dinuclear μ‐arsinidene complex [(η⁵‐C₅H₅)(CO)₂W–Co(CO)₃{μ‐AsCH(SiMe₃)₂}(μ‐CO)] ( 11 ). Treatment of [(η⁵‐C₅H₅)(CO)₂Mo{η³‐tBuPPC(SiMe₃)₂}] ( 1 ) with an equimolar amount of ethereal HBF₄ gave rise to a 85/15 mixture of the saline complexes [(η⁵‐C₅H₅)(CO)₂Mo{η²‐tBu(H)P–P(F)CH(SiMe₃)₂}]BF₄ ( 18 ) and [Cp(CO)₂Mo{F₂PCH(SiMe₃)₂}(tBuPH₂)]BF₄ ( 19 ) by HF‐addition to the PC bond of the η³‐diphosphaallyl ligand and subsequent protonation ( 18 ) and/or scission of the PP bond by the acid ( 19 ). Consistently 19 was the sole product when 1 was allowed to react with an excess of ethereal HBF₄. The products 6 , 9 , 10 , 11 , 18 and 19 were characterized by means of spectroscopy (IR, ¹H‐, ¹³C{¹H}‐, ³¹P{¹H}‐NMR, MS). Moreover, the molecular structures of 6 , 11 and 18 were determined by X‐ray diffraction analysis.     

Halogenation behaviour of bidentate ligand-bridged derivatives of [Ru3(CO)12] and [Os3(CO)12]

Reaction of the ligand-bridged derivatives [M₃(CO)₁₀{μ-(RO)₂PN(Et)P(OR)₂}] and [M₃(CO)₈{μ-(RO)₂PN(Et)P(OR)₂}₂] (M = Ru or Os; R = Me or Prⁱ) with halogens leads to the formation of cationic products [M₃(μ-X)(CO)₁₀{μ- (RO)₂PN(Et)P(OR)₂}]⁺ and [M₃(μ-X)(CO)₈{μ-(RO)₂PN(Et)P(OR)₂}₂]⁺ (X = Cl, Br or I) in which the halogen bridges an opened edge of the metal atom framework; the crystal structure of [Ru₃(μ-I)(CO)₈{μ-(MeO)₂PN(Et)P(OMe)₂}₂]PF₆ is reported.     

Cyclic Tribismuthide as a Piano Stool Complex Ligand – Synthesis and Crystal Structure of (η3‐Bi3)M(CO)33– (M = Cr,Mo)

The reactions between K₅Bi₄, [(C₆H₆)Cr(CO)₃] or [(C₇H₈)Mo(CO)₃], and [2.2.2]crypt in liquid ammonia yielded the compounds [K([2.2.2]crypt)]₃(η³‐Bi₃)M(CO)₃ · 10NH₃ (M = Cr, Mo), which crystallize isostructurally in P2₁/n. Both contain an 18 valence electron piano‐stool complex with a η³‐coordinated Bi₃‐ring ligand. The Bi–Bi distances range from 2.9560(5) to 2.9867(3) Å and are slightly shorter than known Bi–Bi single bonds but longer than Bi–Bi double bonds. The newly found compounds complete the family of similar complexes with E₃‐ring ligands (E = P‐Bi).     

cis‐Tetracarbonylbis(tricyclohexyl­phosphine)molybdenum(0) and pentacarbonyl(tricyclohexylphos­phine)molybdenum(0)

In the present redetermination of the complex cis‐tetra­carbonyl­bis­(tri­cyclo­hexyl­phosphine)molybdenum(0), (I), [Mo(C₁₈H₃₃P)₂(CO)₄] or cis‐{η¹‐[P(C₆H₁₁)₃]₂}Mo(CO)₄, the Mo atom has a distorted octahedral geometry with a large P—Mo—P angle of 104.8 (1)°. A strong trans influence on the carbonyls in (I) is seen in a shortening of the Mo—C and a lengthening of the C—O distances opposite the phosphines compared with those that are cis. This influence is greatly diminished in the complex penta­carbonyl­(tri­cyclo­hexyl­phosphine)­molyb­denum(0), (II), [Mo(C₁₈H₃₃P)(CO)₅] or {η¹‐[P(C₆H₁₁)₃]}­Mo(CO)₅, the core of which has a slightly distorted C_4v geometry.     

Preparation and Reactivity of Mixed‐Ligands Hydride Complexes [RuHCl(CO)(PPh3)2{P(OR)3}]

Mixed‐ligands hydride complexes [RuHCl(CO)(PPh₃)₂{P(OR)₃}] ( 2 ) (R = Me, Et) were prepared by allowing [RuHCl(CO)(PPh₃)₃] ( 1 ) to react with an excess of phosphites P(OR)₃ in refluxing benzene. Treatment of hydrides 2 first with triflic acid and next with an excess of hydrazine afforded hydrazine complexes [RuCl(CO)(κ¹‐NH₂NHR1)(PPh₃)₂{P(OR)₃}]BPh₄ ( 3 , 4 ) (R1 = H, CH₃). Diethylcyanamide derivatives [RuCl(CO)(N≡CNEt₂)(PPh₃)₂{P(OR)₃}]BPh₄ ( 5 ) were also prepared by reacting 2 first with HOTf and then with N≡CNEt₂. The complexes were characterized spectroscopically and by X‐ray crystal structure determination of [RuHCl(CO)(PPh₃)₂{P(OEt)₃}] ( 2b ).     

Heterometall-Komplexe mit E6-Liganden (E = P,As)

Heterometallic Complexes with E₆ Ligands (E = P, As) The reaction of [Cp*Co(μ-CO)]₂ 1 with the sandwich complexes [Cp*Fe(η⁵-E₅)] 2 a: E = P, 2 b: E = As in decalin at 190°C affords besides [CpCo₂E₄] 4: E = P, 7: E = As and [CpFe₂P₄] 5 the trinuclear complexes [(Cp*Fe)₂(Cp*Co)(μ-η²-P₂)(μ₃-η^1:2:1-P₂)₂] 3 as well as [(Cp*Fe)₂(Cp*Co)(μ₃-η^2:2:2-As₃)₂] 6 . With [Mo(CO)₅(thf)] 3 and 6 form in a build-up reaction the tetranuclear clusters [(Cp*Fe)₂(Cp*Co)E₆{Mo(CO)₃}] 10: E = P, 11: E = As. 3, 6 and 11 have been further characterized by an X-ray crystal structure determination.     

Backbone modified small bite-angle diphosphines: Synthesis and molecular structures of [M(CO)4{X2PC(RR)PX2}] (M = Mo, W; X = Ph, Cy; R = H, Me, Et, Pr, allyl, R = Me, allyl)

A range of new small bite-angle diphosphine complexes, [M(CO)₄{X₂PC(R¹R²)PX₂}] (M = Mo, W; X = Ph, Cy; R¹ = H, Me, Et, Pr, allyl, R² = Me, allyl), have been prepared via elaboration of the methylene backbones in [M(CO)₄(X₂PCH₂PX₂)] as a result of successive deprotonation and alkyl halide addition. When X = Ph it proved possible to replace both methylene protons but for X = Cy only one substitution proved possible. This is likely due to the electron-releasing nature of the cyclohexyl groups but may also be due to steric constraints. Attempts to prepare the bis(allyl) substituted complex [Mo(CO)₄{Ph₂PC(allyl)₂PPh₂}] were only moderately successful. The crystal structures of nine of these complexes are presented.     

Palladium(II) and Platinum(II) Complexes with Bisphosphanes, [S2C=C(CN)2]2– and [Se2C=C(CN)2]2– as Chelating Ligands

The palladium(II) and platin(II) 1, 1‐dicyanoethylene‐2, 2‐dithiolates [(L–L)M{S₂C=C(CN)₂}] (M = Pd: L–L = dppm, dppe, dcpe, dpmb; M = Pt: dppe, dcpe, dpmb) were prepared either from[(L–L)MCl₂] and K₂[S₂C=C(CN)₂] or from [(PPh₃)₂M{S₂C=C(CN)₂}] and the bisphosphane. Moreover, [(dppe)Pt{S₂C=C(CN)₂}]was obtained from [(1, 5‐C₈H₁₂)Pt{S₂C=C(CN)₂}] and dppeby ligand exchange. The 1, 1‐dicyanoethylene‐2, 2‐diselenolates[(dppe)M{Se₂C=C(CN)₂}] (M = Pd, Pt) were prepared from[(dppe)MCl₂] and K₂[Se₂C=C(CN)₂]. The oxidation potentials of the square‐planar palladium and platinum complexes were determined by cyclic voltammetry. The reaction of [(dcpe)Pd(S₂C=O)] with TCNE led to a ligand fragment exchange and gave the 1, 1‐dicyanoethylene‐2, 2‐dithiolate [(dcpe)Pd{S₂C=C(CN)₂}] in good yield.     

Chemie polyfunktioneller Moleküle, 94 Chrom- und Wolfram-pentacarbonylderivate des 4-Methyl-1,2,6-triphosphatricyclo[2.2.1.02,6]heptans (P3-Nortricyclans)

The P₃-nortricyclane 4-methyl-1,2,6-triphosphatricyclo[2.2.1.0^2,6]heptane, CH₃C(CH₂P)₃, (1), is synthesized in a better yield than earlier described from P₄, a Na/K alloy, and CH₃C(CH₂Br)₃ in boiling 1,2-dimethoxyethane. It reacts withM(CO)₅ thf (M=Cr, W) in the molar ratios of 1:1, 1:2, and 1:3 to form the pentacarbonylmetal complexes CH₃C(CH₂P)₃[M(CO)₅] _n [n=1, 2, 3;M=Cr (a), W (b)], (2 a, b–4 a, b).1 gives with Mo(CO)₅ thf only mixtures of CH₃C(CH₂P)₃[Mo(CO)₅] _n andcis-Mo(CO)₄ derivatives, which were identified by their infrared active A₁ v(CO) modes at 2075 and 2025 cm^–1.All the new compounds have been characterized also by their¹H{³¹P},³¹P{¹H} NMR, IR,Raman, and mass spectra.

     

Untersuchungen zur Darstellung von [CpxSb{M(CO)5}2] (Cpx = Cp,Cp*; M = Cr,W)

Investigations of the Synthesis of [Cp^xSb{M(CO)₅}₂] (Cp^x = Cp, Cp*; M = Cr, W) The reaction of CpSbCl₂ with [Na₂{Cr₂(CO)₁₀}] leads to the chlorostibinidene complex [ClSb{Cr(CO)₅}₂(thf)] ( 1 ), whereas the reaction of CpSbCl₂ with [Na₂{W₂(CO)₁₀}] results in the formation of the complexes [ClSb{W(CO)₅}₃] ( 2 ), [Na(thf)][Cl₂Sb{W(CO)₅}₂] ( 3 ), [ClSb{W(CO)₅}₂(thf)] ( 4 ) and [Sb₂{W(CO)₅}₃] ( 5 ). The stibinidene complex [CpSb{Cr(CO)₅}₂] ( 6 ) is obtained by the reaction of [ClSb{Cr(CO)₅}₂] with NaCp, while its Cp* analogue [Cp*Sb{Cr(CO)₅}₂] ( 7 ) is formed via the metathesis of Cp*SbCl₂ with [Na₂{Cr₂(CO)₁₀}]. The products 2 , 3 , 4 and 7 are additionally characterised by X‐ray structure analyses.     

Monoxidised Sulfur and Selenium Derivatives of 1,8‐Bis(diphenylphosphino)naphthalene: Synthesis and Coordination Chemistry

Treatment of 1,8‐bis(diphenylphosphino)naphthalene (dppn, 1 ) with stoichiometric amounts of sulfur or selenium in toluene at 80 °C selectively afforded the diphosphine monochalcogenides 1‐Ph₂P(C₁₀H₆)‐8‐P(:S)Ph₂ (dppnS, 2 a ) and 1‐Ph₂P(C₁₀H₆)‐8‐P(:Se)Ph₂ (dppnSe, 2 b ). The ³¹P{¹H} NMR spectrum of 2 b showed an unusually large ⁵J(P–Se) value, which indicates a significant through‐space coupling component. The monosulfide acted as a bidentate P,S‐ligand towards platinum(II) ( 3 a ), whereas the corresponding monoselenide complex ( 3 b ′) lost elemental selenium with formation of the previously reported complex [PtCl₂(dppn)‐P,P′] ( 3 ). Treatment of dppnSe with [(nor)Mo(CO)₄] (nor = norbornadiene) led to formation of [(dppnSe)Mo(CO)₄‐P,Se] ( 3 b ). Solutions of the latter slowly deposited Se with formation of [(dppn)Mo(CO)₄‐P,P′] ( 4 ) which was also obtained by independent synthesis from 1 and [(nor)Mo(CO)₄]. All isolated new compounds were characterised by a combination of ³¹P, ¹H, ¹³C and ⁷⁷Se ( 2 b ) NMR spectroscopy, IR spectroscopy, mass spectrometry and elemental analysis. Single‐crystal X‐ray structure determinations were performed for dppnSe ( 2 b ), [PtCl₂(dppnS)‐P,S] ( 3 a ), [(dppnSe)Mo(CO)₄‐P,Se] ( 3 b ) and [(dppn)Mo(CO)₄‐P,P′] ( 4 ). In 2 b steric effects cause the naphthalene ring to be distorted and force the phosphorus atoms by 65 and 59 pm to opposite sides of the best naphthalene plane. In the metal complexes 3 a , 3 b and 4 the phosphino‐phosphinochalcogenyl systems act as bidentate ligands through the P and the chalcogen atoms. The naphthalene systems are again distorted. The two independent molecules of 4 differ in their conformations.     

Die Reaktion von tBu2P‐P=P(Me)tBu2 mit [Fe2(CO)9] und [(η2‐C8H14)2Fe(CO)3]

^tBu₂P‐P=P(Me)^tBu₂ reacts with [Fe₂(CO)₉] to give [μ‐(1, 2, 3:4‐η‐^tBu₂P¹‐P²‐P³‐P^4tBu₂){Fe(CO)₃}{Fe(CO)₄}] ( 1 ) and [trans‐(^tBu₂MeP)₂Fe(CO)₃]( 2 ). With [(η²‐C₈H₁₄)₂Fe(CO)₃] in addition to [μ‐(1, 2, 3:4‐η‐^tBu₂P¹‐P²‐P³‐P^4tBu₂){Fe(CO)₂PMe^tBu₂}‐{Fe(CO)₄}] ( 10 ) and 2 also [(μ‐P^tBu₂){μ‐P‐Fe(CO)₃‐PMe^tBu₂}‐{Fe(CO)₃}₂(Fe‐Fe)]( 9 ) is formed. 1 crystallizes in the monoclinic space group P2₁/c with a = 875.0(2), b = 1073.2(2), c = 3162.6(6) pm and β = 94.64(3)?. 2 crystallizes in the monoclinic space group P2₁/c with a = 1643.4(7), b = 1240.29(6), c = 2667.0(5) pm and β = 97.42(2)?. 9 crystallizes in the monoclinic space group P2₁/n with a = 1407.5(5), b = 1649.7(5), c = 1557.9(16) pm and β = 112.87(2)?.     

[3+2] Cycloadditions of Metallo Nitrile Ylides and Metallo Nitrile Imines with Metal Carbonyl,Thiocarbonyl, and Isocyanide Complexes: Heterodimetallic Systems with Bridging Heterocycles [1]

The reactions of [Re(CO)₆]⁺, [FeCp(CO)₂CS]⁺ and [FeCp(CNPh)₃]⁺ with the metallo nitrile ylides [M^–{C⁺=N–C^–(H)CO₂Et}(CO)₅]^– (M = Cr, W) and the chromio nitrile imine [Cr^–{C⁺=N–N^–H}(CO)₅]^– (generated by mono‐α‐deprotonation of the parent isocyanide complexes) to give neutral 5‐metallated 1,3‐oxazolin‐ ( 1 ), 1,3‐thiazolin‐ ( 2 ), imidazolin‐ ( 3 , 4 ), 1,3,4‐oxdiazolin‐ ( 5 ), 1,3,4‐thiadiazolin‐ ( 6 ) and 1,3,4‐triazolin‐2‐ylidene ( 8 ) chromium and tungsten complexes represent the first all‐organometallic versions of Huisgen’s 1,3‐dipolar cycloadditions. The formation of 6 and 8 is accompanied by partial decomposition to (OC)₅Cr–C≡N–FeCpL₂ {L = CO ( 7 ), CNPh ( 9 )}. The structures of 4a and 5 have been characterized by X‐ray diffraction.     

Formation of Alkyne Bridged Multicobalt Carbonyl Complexes with Tris(2‐Thienyl)Phosphine or Bis(Trimethylsilylethynyl)Phenylphosphine Ligand

Treatment of Co₄(CO)₁₂ with an excess of trimethylsilylacetylene (TMSA) in the presence of tri(2‐thienyl)phosphine in THF at 25 °C for 2 hours yielded six compounds. Two pseudo‐octahedral, alkyne‐bridged tetracobalt clusters, [Co₄(μ₄‐η²‐HC≡CSiMe₃)(CO)₁₀(μ‐CO)₂] ( 4 ) and [Co₄(μ₄‐η²‐HC≡CSiMe³)‐(CO)₉(μ‐CO)₂{P(C₄H₄S)₃}] ( 6 ), along with an alkyne‐bridged dicobalt complex, [Co₂(CO)₅(μ‐HC≡CSiMe₃)‐{P(C₄H₄S)₃}] ( 5 ), were obtained as new compounds. The addition of the thienylphosphine ligand, in fact, facilitates the reaction rate. Reaction of an alkyne‐bridged dicobalt complex, [(η²‐H‐C≡C‐SiMe₃)Co₂(CO)₆] ( 3 ), with a bi‐functional ligand, PPh(‐C≡C‐SiMe₃)₂, yielded an unexpected six‐membered, cyclic compound, {(Ph)(Me₃Si‐C≡C)P‐[(η²‐C≡C‐SiMe₃)Co₂(CO)₅]}₂ ( 7 ). All of these new compounds were characterized by spectroscopic means; the solid‐state structures of ( 5 ), ( 6 ) and ( 7 ) have been established by X‐ray crystallography.     

Chiral functionalized bisphosphine ligands: Transition metal complexes of 1,2-bis(tert-Butylchlorophosphino)-1,2-dicarba-closo-dodecaborane(12)

When rac- or meso-1,2-bis(tert-butylchlorophosphino)-1,2-dicarba-closo-dodecaborane(12) (1a or 1b) is reacted with [M(CO)₄(NBD)] (M = Cr, Mo, NBD = norbornadiene), [Mo(CO)₄(EtCN)₂] or [W(CO)₆], rac-[Cr(CO)₄{1,2-(P^tBuCl)₂C₂B₁₀H₁₀}] (2), rac- or meso-[Mo(CO)₄{1,2-(P^tBuCl)₂C₂B₁₀H₁₀}] (3a or 3b) and rac-[W(CO)₄{1,2-(P^tBuCl)₂C₂B₁₀H₁₀}] (4) could be isolated as pure diastereomers. UV irradiation of 1 with [Cr(CO)₆] in moist THF proceeds with hydrolysis and formation of [Cr(CO)₄{1,2-(P(OH)^tBu)₂C₂B₁₀H₁₀}] (5) which contains the metal complex-stabilized phosphinous acid. Compounds 2–5 were characterized spectroscopically (¹H, ³¹P, ¹¹B, ¹³C NMR), by mass spectrometry and by X-ray structure determination.     

Conjugate additions of functionalized carbanions to the vinylidene groups of [M(CO)4{(Ph2P)2CCH2}] (M = W,Mo or Cr)

Treatment of complexes of the type [M(CO)₄{(Ph₂P)₂CCH₂}] (M = W, Mo or Cr) with functionalized lithium reagents, LiR, followed by hydrolysis gives complexes of the type [M(CO)₄{PH₂P)₂CHCH₂R}] in high yields; R = C₆H₄Me-4, C₆H₄OMe-2, C₆H₃(OMe)₂-2,6, C₆H₄OH-2, C₆H₄(COOH)-2, CH₂COPh or CH₂COMe. IR, and ³¹P and ¹H NMR data are given.