Green Colorants Based on Energetic Azole Borates

The investigation of green‐burning boron‐based compounds as colorants in pyrotechnic formulations as alternative for barium nitrate, which is a hazard to health and to the environment, is reported. Metal‐free and nitrogen‐rich dihydrobis(5‐aminotetrazolyl)borate salts and dihydrobis(1,3,4‐triazolyl)borate salts have been synthesized and characterized by NMR spectroscopy, elemental analysis, mass spectrometry, and vibrational spectroscopy. Their thermal and energetic properties have been determined as well. Several pyrotechnic compositions using selected azolyl borate salts as green colorants were investigated. Formulations with ammonium dinitramide and ammonium nitrate as oxidizers and boron and magnesium as fuels were tested. The burn time, dominant wavelength, spectral purity, luminous intensity, and luminous efficiency as well as the thermal and energetic properties of these compositions were measured.     

Energetic Derivatives of 4, 4′,5, 5′‐Tetranitro‐2, 2′‐bisimidazole (TNBI)

4, 4′,5, 5′‐Tetranitro‐2, 2′‐bisimidazole (TNBI) was synthesized by nitration of bisimidazole (BI) and recrystallized from acetone to form a crystalline acetone adduct. Its ammonium salt ( 1 ) was obtained by the reaction with gaseous ammonia. In order to explore new explosives or propellants several energetic nitrogen‐rich 2:1 salts such as the hydroxylammonium ( 3 ), guanidinium ( 4 ), aminoguanidinium ( 5 ), diaminoguanidinium ( 6 ) and triaminoguanidinium 7 4, 4′,5, 5′‐tetranitro‐2, 2′‐bisimidazolate were prepared by facile metathesis reactions. In addition, methylated 1, 1′‐dimethyl‐4, 4′,5, 5′‐tetranitro‐2, 2′‐bisimidazole (Me₂TNBI, 8 ) was synthesized by the reaction of 2 and dimethyl sulfate. Metal salts of TNBI can also be easily synthesized by using the corresponding metal bases. This was proven by the synthesis of pyrotechnically relevant dipotassium 4, 4′,5, 5′‐tetranitro‐2, 2′‐bisimidazolate ( 2 ), which is a brilliant burning component e.g. in near‐infrared flares. All compounds were characterized by single crystal X‐ray diffraction, NMR and vibrational spectroscopy, elemental analysis and DSC. The sensitivities were determined by BAM methods (drophammer and friction tester). The heats of formation were calculated using CBS‐4M electronic enthalpies and the atomization method. With these values and mostly the X‐ray densities different detonation parameters were computed by the EXPLO5 computer code. Due to the great thermal stability and calculated energetic properties, especially guanidinium salt 4 could be served as a HNS replacement.     

Novel Compounds with a Viologen Skeleton and N‐Heterocycles on the Peripheries: Electrochemical and Spectroscopic Properties

The present article deals with novel compounds comprising a redox‐active group as core and a nucleobase in the peripheries, linked covalently via a spacer. The new derivatives 1,1′,1″‐(benzene‐1,3,5‐triyltrimethanediyl)tris{1′‐[3‐(3,4‐dihydro‐5‐methyl‐2,4‐dioxopyrimidin‐1(2H)‐yl)propyl]‐4,4′‐bipyridinium} hexafluorophosphate ( 1 ), 1,1′,1″‐(benzene‐1,3,5‐triyltrimethanediyl)tris{1′‐[2‐(4‐chloro‐7H‐pyrrolo[2,3‐d]pyrimidine‐7‐yl)ethyl]‐4,4′‐bipyridinium} hexachloride ( 2a ) 1

1 The numbering of the pyrrolo[2,3‐d]pyrimidine system follows the IUPAC rules and is different from that of the purine ring system.

, and 1,1′,1″‐(benzene‐1,3,5‐triyltrimethanediyl)tris{1′‐[2‐(2‐amino‐4‐chloro‐7H‐pyrrolo[2,3‐d]pyrimidine‐7‐yl)ethyl]‐4,4′‐bipyridinium} hexabromide ( 2b )¹) were synthesized by nucleobase‐anion alkylation and linked to the 4,4′‐bipyridinium core. UV and CV analyses of these compounds were performed and revealed significantly different properties.     

Dimeres N-Lithium-N′,N′-bis(dimethylphenylsilyl)- und trimeres N,N′-Dilithium-N,N′-bis(dimethylphenylsilyl)hydrazid – Synthesen,Strukturen und Reaktionen

Dimeric N-Lithium-N′,N′-bis(dimethyphenylsilyl)- and trimeric N,N′-Dilithium-N,N′-bis(dimethylphenylsilyl)hydrazide – Syntheses, Structures, and Reactions Dilithiated hydrazine reacts with two equivalents chlorodimethylphenylsilane to the isomeric bis(silyl)hydrazines 1 a and 1 b . Reactions of 1 a / 1 b with one and two equivalents n-butyllithium lead to the lithium derivatives 2 and 4 . The crystal structure analyses of 2 and 4 are reported. 2 forms with difluorodiisopropylsilane the tris(silyl)hydrazine 3 . The tetrakis(silyl)hydrazines 5 and 6 are formed in reactions of 4 with trifluoromethylsilane and tetrafluorosilane.     

Novel Cesium Membrane Sensor Based on a Cavitand

A PVC‐based membrane sensor was prepared for Cs⁺ ions, which was based on 7,11,15,28‐tetraiodo‐1,21,23,25‐tetramethyl‐2,20:3,19‐dimethano‐1H,21H,23H,25H‐bis[1,3]dioxocino[5,4‐i:5′,4′i′] benzo[1,2‐d:5,4‐d′]‐bis[1,3]benzodioxocin stereoisomer (cavitand). The proposed membrane electrode exhibits a linear dynamic range of 1.0 × 10^?;1–1.0 × 10^?;5M, with a Nernstian slope of 59.1 ± 0.3 mV per decade, and a detection limit of 5.0 × 10^?;6 M. It has a very fast response time of <10 s and can be used for at least eight weeks without any considerable divergence in its potentials. The best sensor performance was obtained with a membrane containing 30% PVC, 62% dibutylphthalate (DBP), 6% cavitand, and 2% potassium tetrakis(p‐chlorophenyl) borate (KTpClPB). The sensor could be used in a pH range of 4.3–9.5.     

An Efficient Synthesis of Spiro‐oxindole Derivatives by Three‐Component Reactions in Water

An efficient synthesis of (3S)‐1,1′,2,2′,3′,4′,6′,7′‐octahydro‐9′‐nitro‐2,6′‐dioxospiro[3H‐indole‐3,8′‐[8H]pyrido[1,2‐a]pyrimidine]‐7′‐carbonitrile is achieved via a three‐component reaction of isatin, ethyl cyanoacetate, and 1,2,3,4,5,6‐hexahydro‐2‐(nitromethylidene)pyrimidine. The present method does not involve any hazardous organic solvents or catalysts. Also the synthesis of ethyl 6′‐amino‐1,1′,2,2′,3′,4′‐hexahydro‐9′‐nitro‐2‐oxospiro[3H‐indole‐3,8′‐[8H]pyrido[1,2‐a]pyrimidine]‐7′‐carboxylates in high yields, at reflux, using a catalytic amount of piperidine, is described. The structures were confirmed spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS data) and by elemental analyses. A plausible mechanism for this reaction is proposed (Scheme 2).     

Brominated trimetrexate analogues as inhibitors of pneumocystis carinii and toxoplasma gondii dihydrofolate reductase

Five previously undescribed trimetrexate analogues with bulky 2′-bromo substitution on the phenyl ring were synthesized in order to assess the effect of this structure modification on dihydrofolate reductase inhibition. Condensation of 2-[2-(2-bromo-3,4,5-trimethoxyphenyl)ethyl]-1,l-dicyanopropene with sulfur in the presence of N,N-diethylamine afforded 2-amino-5-(2′-bromo-3′,4′,5′-trimethoxybenzyl)-4-methyl-thiophene-3-carbonitrile ( 15 ) and 2-amino-4-[2-(2′-bromo-3′,4′,5′-trimethoxyphenyl)ethyl]thiophene-3-car-bonitrile ( 16 ). Further reaction with chloroformamidine hydrochloride converted 15 and 16 into 2,4-diamino-5-(2′-bromo-3′,4′,5′-trimethoxybenzyl)-4-methylthieno[2,3-d]pyrimidine ( 8a ) and 2,4-diamino-4-[2-(2′-bromo-3′,4′,5′-trimethoxyphenyl)ethylthieno[2,3-d]pyrimidine ( 12 ) respectively. Other analogues, obtained by reductive coupling of the appropriate 2,4-diaminoquinazoline-6(or 5)-carbonitriles with 2-bromo-3,4,5-trimethoxyaniline, were 2,4-diamino-6-(2′-bromo-3′,4′,5′-trimethoxyanilinomethyl)-5-chloro-quinazoline ( 9a ), 2,4-diamino-5-(2′-bromo-3′,4′,5′-trimethoxyanilinomethyl)quinazoline ( 10 ), and 2,4-diamino-6-(2′-bromo-3′,4′,5′-trimethoxyanilinomethyl)quinazoline ( 11 ). Enzyme inhibition assays revealed that space-filling 2′-bromo substitution in this limited series of dicyclic 2,4-diaminopyrimidines with a 3′,4′,5′-trimethoxyphenyl side chain and a CH₂, CH₂CH₂, or CH₂NH bridge failed to improve species selectivity against either P. carinii or T. gondii dihydrofolate reductase relative to rat liver dihydrofolate reductase.     

Thermal latency of novel chelating borate catalysts as latent catalysts for epoxy–phenolic resins

Novel quaternary ammonium bis(2‐oxybenzoyloxy)borate salts ( 1a – 1c ) or quaternary ammonium bis(1,2‐benzenedioxy)borate salts ( 2a and 2b ) with tetra‐n‐butylammonium (TBA⁺), tetra‐n‐octylammonium (TOA⁺), or bis(triphenylphosphoranylidene)ammonium (PNP⁺) cations were synthesized as latent catalysts of epoxy/phenol–novolac resins by the complexation between boric acid and salicylic acid or catechol, followed by neutralization with quaternary ammonium hydroxide. Polyaddition reactions of diglycidyl ether of bisphenol A (DGEBA) and 4,4′‐bisphenol F (44BPF) or bisphenol F (BPF‐D) with the ammonium borates were investigated as model reactions of epoxy/phenol–novolac resin systems with respect to the thermal latency and storage stability of the catalyst. The polyaddition of DGEBA/44BPF with 1a – 1c in diglyme at 150 °C for 6 h proceeded up to 85–96% conversions and gave polymers with number‐average molecular weights of 4180–10,500, whereas the polyaddition at 80 °C for 6 h gave less than 8% conversions. However, the polyaddition with 2a containing TBA⁺ cation proceeded to only a 32% conversion at 150 °C for 6 h in diglyme and to a 64% conversion even at 180 °C for 6 h in triglyme and only gave low molecular weight oligomers, and no reaction proceeded in the polyaddition at 80 °C. However, polyaddition with 2b containing PNP⁺ cation proceeded up to a 96% conversion at 150 °C for 6 h in diglyme and gave a higher molecular weight polymer with a number‐average molecular weight of 8050, whereas the polyaddition at 80 °C for 6 h gave only a 5% conversion. The catalytic activity of ammonium borates 1a – 1c and 2a and 2b depended on the borate anion structure: 1a and 1c with bis(2‐oxybenzoyloxy)borate anion revealed higher activity than 2a and 2b with bis(1,2‐benzenedioxy)borate anion, respectively. In comparison with tetra‐n‐butylammonium bromide (TBAB) as a conventional ammonium salt or tetra‐n‐butylammonium tetrakis(benzoyloxy)borate (TBA‐TBB), 1a – 1c and 2b revealed better thermal latency. The catalytic activity of ammonium borates also depended on the bulkiness of the ammonium cation, and the order of activity was 1c (PNP⁺) > 1b (TOA⁺) ≧ 1a (TBA⁺) and 2b (PNP⁺) > 2a (TBA⁺). The storage stability of DGEBA/BPF‐D with the ammonium borate catalysts 1a – 1c and 2a and 2b in bulk at 40 °C was much better than that with TBAB and TBA‐TBB. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2702–2716, 2002     

Metallocene‐mediated cationic ring‐opening polymerization of 2‐methyl‐ and 2‐phenyl‐oxazoline

The cationic ring‐opening polymerization of 2‐methyl‐2‐oxazoline and 2‐phenyl‐2‐oxazoline was efficiently used using bis(η⁵‐cyclopentadienyl)dimethyl zirconium, Cp₂ZrMe₂, or bis(η⁵‐tert‐butyl‐cyclopentadienyl)dimethyl hafnium in combination with either tris(pentafluorophenyl)borate or tetrakis(pentafluorophenyl)borate dimethylanilinum salt as initiation systems. The evolution of polymer yield, molecular weight, and molecular weight distribution with time was examined. In addition, the influence of the initiation system and the monomer on the control of the polymerization was studied. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 000: 000–000, 2011     

Syntheses and electroluminescence properties of conjugated poly(p‐phenylene vinylene) derivatives bearing dendritic pendants

A series of new poly(p‐phenylene vinylene) derivatives with different dendritic pendants—poly{2‐[3′,5′‐bis(2″‐ethylhexyloxy)benzyloxy]‐1,4‐phenylenevinylene} (BE–PPV), poly{2‐[3′,5′‐bis(3″,7″‐dimethyl)octyloxy]‐1,4‐phenylenevinylene} (BD–PPV), poly(2‐{3′,5′‐bis[3″,5″‐bis(2?‐ethylhexyloxy)benzyloxy]benzyloxy}‐1,4‐phenylenevinylene) (BBE–PPV), poly(2‐{3′,5′‐bis[3″,5″‐bis(3?,7?‐dimethyloctyloxy)benzyloxy]benzyloxy}‐1,4‐phenylenevinylene) (BBD–PPV), and poly[(2‐{3′,5′‐bis[3″,5″‐bis(2?‐ethylhexyloxy)benzyloxy]benzyloxy}‐1,4‐phenylenevinylene)‐co‐(2‐{3′,5′‐bis[3″,5″‐bis(3?,7?‐dimethyloctyloxy)benzyloxy]benzyloxy}‐1,4‐phenylenevinylene)] (BBE‐co‐BBD–PPV; 1:1)—were successfully synthesized according to the Gilch route. The structures and properties of the monomers and the resulting conjugated polymers were characterized with ¹H and ¹³C NMR, elemental analysis, gel permeation chromatography, thermogravimetric analysis, ultraviolet–visible absorption spectroscopy, photoluminescence, and electroluminescence spectroscopy. The obtained polymers possessed excellent solubility in common solvents and good thermal stability, with a 5% weight loss temperature of more than 328 °C. The weight‐average molecular weights and polydispersity indices of BE–PPV, BD–PPV, BBE–PPV, BBD–PPV, and BBE‐co‐BBD–PPV (1:1) were in the range of 1.33–2.28 × 10⁵ and 1.35–1.53, respectively. Double‐layer light‐emitting diodes (LEDs) with the configuration of indium tin oxide/polymer/tris(8‐hydroxyquinoline) aluminum/Mg:Ag/Ag devices were fabricated, and they emitted green‐yellow light. The turn‐on voltages of BE–PPV, BD–PPV, BBE–PPV, BBD–PPV, and BBE‐co‐BBD–PPV (1:1) were approximately 5.6, 5.9, 5.5, 5.2, and 4.8 V, respectively. The LED devices of BE–PPV and BD–PPV possessed the highest electroluminescent performance; they exhibited maximum luminance with about 860 cd/m² at 12.8 V and 651 cd/m² at 13 V, respectively. The maximum luminescence efficiency of BE–PPV and BD–PPV was in the range of 0.37–0.40 cd/A. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3126–3140, 2005     

Synthesis and Characterization of a Metal‐Organic Coordination Polymer

A novel energetic microporous metal‐organic coordination polymer {[Ni(tnbpdc)(bpy)(H₂O)₂] · 1.5(DMF)}_n ( 1 ) (tnbpdc = 2, 2′,6, 6′‐tetranitro‐4, 4′‐biphenyl dicarboxylate, bpy = 4, 4′‐bipyridine) was prepared solvothermally and characterized by elemental, IR spectroscopic, and single‐crystal X‐ray diffraction analyses. The X‐ray crystal structure of 1 revealed a rectangular‐shaped grid constructed with tnbpdc linkers and bpy linkers, with the free tunnel size estimated as 11 × 15 Ų. The thermal stability of the compound was evaluated by differential scanning calorimetry and thermogravimetric analysis. Such complexes may find application as novel heat‐resistant energetic materials.     

Unprecedented Strong Lewis Bases—Synthesis and Methyl Cation Affinities of Dimethylamino‐Substituted Terpyridines

A versatile method for the synthesis of functionalized 2,2′:6′,2′′‐terpyridines by assembly of the terminal pyridine rings is presented. The cyclization precursors—bis‐β‐ketoenamides—are prepared from 4‐substituted 2,6‐pyridinedicarboxylic acids and acetylacetone or its corresponding enamino ketone. Treatment with trimethylsilyl trifluoromethanesulfonate induces a twofold intramolecular condensation providing an efficient access to 4,4′′‐di‐ and 4,4′,4′′‐trifunctionalized 6,6′′‐dimethyl‐2,2′:6′,2′′‐terpyridines. Using this method, hitherto unknown 4,4′′‐bis(dimethylamino)‐ and 4,4′,4′′‐tris(dimethylamino)terpyridines have been prepared that show remarkably high calculated Lewis basicities.     

Studies with Heterocyclic β‐Enaminoniriles: A Simple Route for the Synthesis of Polyfunctionally Substituted Thiophene,Imidazo[1,2:1′,6′]pyrimido[5,4‐b]thiophene and Thieno[3,2‐d]pyrimidine Derivatives

Reaction of 3,5‐diaminothiophene‐2‐carbonitrile derivatives 3a‐c with ethoxycarbonylmethyl isothiocyanate and/or N‐[bis(methylthio)methylene]glycine ethyl ester led to formation of 7‐substituted‐8‐amino‐5‐thioxo‐6H‐imidazo[1,2:1′,6′]pyrimido[5,4‐b]thiophene‐2(3H)‐one derivatives 6a‐c and 7‐substituted‐8‐amino‐5‐(methylthio)imidazo[1,2:1′,6′]pyrimido[5,4‐b]thiophene‐2(3H)‐one 7a‐c , respectively. Also, the synthetic potential of the β‐enaminonitrile moiety in 3a‐c has been explored; it proved to be a promising candiate for the synthesis of 1,6‐disubstituted‐2,4‐diamino‐7,8‐dihydro‐8‐oxopyrrolo[1,2‐a]thieno[2,3‐e]pyrimidine derivatives 10a‐f and pyrido[2′,3′:6,5]pyrimido[3,4‐a]benzimidazole derivatives 12a,b .     

New Heteroaromatic Complexing Agents and Luminescence of Their Europium(III) and Terbium(III) Chelates

Twelve heteroaromatic complexing agents 9a–I were synthesized with the purpose to develop suitable labels for time-resolved luminescence-based bioaffinity assays. The relative luminescence yields, excitation maxima, and emission decay constants of their europium(III) and terbium(III) chelates were determined. According to these results, 2,2′,2″,2?-[(2,2′-bipyridine-6,6′-diyl)bis(methylenenitrilo)]tetrakis (acetic acid) ( 9e ) and 2,2′,2″,2?-[(2,2′:6′,2″-terpyridine-6,6″-diyl)bis(methylenenitrilo)] tetrakis(acetic acid) ( 91 ) are the most promising agents.     

First synthesis of novel pentaheterocyclic ring system of 1,2,4‐triazolo[2″,3″:6′,1′]pyrimido[4′,5′:2,3]pyrido[1,2‐a]benzimidazole

Reaction of 1‐amino‐3‐arylpyrido[1,2‐a]benzimidazole‐2,4‐dicarbonitrile (1) with dimethylformamide‐dimethylacetal (DMF‐DMA) gave 1 ‐[N,N‐(dimethylaminomethylene)amino]‐3‐arylpyrido[1,2‐a]benzimidazole‐2,4‐dicarbonitrile (2). Compounds (1) reacted with triethylorthoformate yielding 1‐[N‐(ethoxymethylene)amino]‐3‐arylpyrido[1,2‐a]benzimidazole‐2,4‐dicarbonitrile (3). 3‐Amino‐4‐imino‐5‐aryl‐6‐cyanopyrimido[5′,4′:5,6]pyrido[1,2‐α] benzimidazole (4) was synthesized via condensation of either (2) or (3) with hydrazine hydrate. Reactions of (4) with acetic anhydride, ethyl chloroformate or aryl isothiocyanate yielded the respective derivative of the new ring system namely 1,2,4‐triazolo[2″,3″:6′,1′]pyrimido[4′,5′:2,3]pyrido[1,2‐a]benzimidazole (5–7).     

Synthesis of P‐Unsymmetrically Substituted Derivatives of NAPHOS

2, 2′‐Bromomethyl‐1, 1′‐binaphthyl reacted with di‐tert‐butylphosphine to form (R, S)‐4, 4‐di‐tert‐butyl‐4, 5‐dihydro‐3Hdinaphtho[2, 1‐c:1′, 2′‐e] phosphepinium bromide 5a . The di‐iso‐propyl‐ ( 5b) and the phenyl‐ethyl ( 5c ) analogue of compound 5a were prepared by similar routes. Treatment of 5a with potassium diphenylphosphide, KPPh₂, afforded the corresponding bis‐phosphine, 2‐di‐tert‐butylphosphino‐methyl‐2′‐diphenylphosphino‐methyl‐1, 1′‐binaphthyl 6 . An attempt at the synthesis of the first example of a bis‐phosphonite ligand with a 2, 2′‐dimethyl‐1, 1′‐binaphthyl backbone unexpectedly led, in the first step, to 2, 2′‐bis[diethylamino‐methoxy‐phosphino]‐1, 1′‐binaphthyl 9 . X‐ray crystal structure analyses were carried out for the phosphepinium bromides 5a and 5c , and for the bis‐phosphines 6 and 9 . In compounds 5a and 5c the interplanar angle between the two parts of the binaphthyl group is 65.8° and 64.5°, respectively, as reflected in the conformation of the seven‐membered ring. In 5a the bromide and methanol residues are hydrogen‐bonded to form Br^— (···HOCH₃)₂ units. In 6 the binaphthyl interplanar angle is 86.1°; the two halves of the molecule show appreciably different conformations of the ring substituents, as do those of 9 (binaphthyl angle 78.6°).     

Novel quaternary ammonium borates as latent catalysts for epoxy–phenolic resins

Novel tetrabutylammonium tetrakis(substituted benzoyloxy)borate salts ( 1a – 1d ) were synthesized by the reaction of tetrabutylammonium tetraphenylborate and corresponding substituted benzoic acids. Polyaddition reactions of diglycidyl ether of bisphenol A (DGEBA) and 4,4′‐bisphenol F (44BPF) or bisphenol F (BPF‐D) with the ammonium borates were investigated as model reactions of epoxy/phenol–novolac resin systems with respect to the thermal latency and storage stability of the catalyst. The polyaddition of DGEBA/44BPF with the ammonium borates in diglyme at 150 °C for 6 h proceeded up to 84–94% conversions and gave polymers with number‐average molecular weights of 3750–5750, whereas the polyaddition at 80 °C for 6 h gave less than 9% conversions. The catalytic activity of ammonium borates 1a – 1d depended on the substituent of the phenyl group of the borates, and the order of activity was 1b (p‐OMe) > 1a (? H) > 1c (p‐NO₂) > 1d [3,5‐(NO₂)₂]. The ammonium borate catalyst with the substituent that yielded lower acidity of the corresponding substituted benzoic acid tended to reveal higher activity. In comparison with tetrabutylammonium bromide (TBAB) as a conventional ammonium salt, 1a – 1d revealed better thermal latency. The storage stability of DGEBA/BPF‐D with the ammonium borate catalysts in bulk at 40 °C was better than that with TBAB. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2689–2701, 2002     

Synthesis of 5‐Aminotetrazole‐1 N‐oxide and Its Azo Derivative: A Key Step in the Development of New Energetic Materials

1‐Hydroxy‐5‐aminotetrazole ( 1 ), which is a long‐desired starting material for the synthesis of hundreds of new energetic materials, was synthesized for the first time by the reaction of aqueous hydroxylamine with cyanogen azide. The use of this unique precursor was demonstrated by the preparation of several energetic compounds with equal or higher performance than that of commonly used explosives, such as hexogen (RDX). The prepared compounds, including energetic salts of 1‐hydroxy‐5‐aminotetrazole (hydroxylammonium ( 2 , two polymorphs) and ammonium ( 3 )), azo‐coupled derivatives (potassium ( 5 ), hydroxylammonium ( 6 ), ammonium ( 7 ), and hydrazinium 5,5′‐azo‐bis(1‐N‐oxidotetrazolate ( 8 , two polymorphs)), as well as neutral compounds 5,5′‐azo‐bis(1‐oxidotetrazole) ( 4 ) and 5,5′‐bis(1‐oxidotetrazole)hydrazine ( 9 ), were intensively characterized by low‐temperature X‐ray diffraction, IR, Raman, and multinuclear NMR spectroscopy, elemental analysis, and DSC. The calculated energetic performance, by using the EXPLO5 code, based on the calculated (CBS‐4M) heats of formation and X‐ray densities confirm the high energetic performance of tetrazole‐N‐oxides as energetic materials. Last but not least, their sensitivity towards impact, friction, and electrostatic discharge were explored. 5,5′‐Azo‐bis(1‐N‐oxidotetrazole) deflagrates close to the DDT (deflagration‐to‐detonation transition) faster than all compounds that have been investigated in our research group to date.     

Synthesis of new nucleoside analogs containing amino bisphosphonic groups

Adenosine derivatives containing a 2,2-bis(diethoxyphosphoryl)ethyl or 2,2-diphosphonoethyl group on the amino nitrogen atom were synthesized for the first time by reaction of 5′-chloro-5′-deoxy- and 5′-hydroxy-2′,3′-isopropylideneadenosine with tetraethyl ethene-1,1-diylbis(phosphonate) or tetrakis(trimethylsilyl) ethene-1,1-diylbis(phosphonate).     

Synthesis and Characterization of 3,3′‐Bis(Dinitromethyl)‐5,5′‐Azo‐1H‐1,2,4‐Triazole

The synthesis of 3,3′‐bis(dinitromethyl)‐5,5′‐azo‐1H‐1,2,4‐triazole ( 5 ) using the readily available starting material 2‐(5‐amino‐1H‐1,2,4‐triazol‐3‐yl)acetic acid ( 1 ) is described. All compounds were characterized by means of NMR, IR, and Raman spectroscopy. The energetic compound 5 was additionally characterized by single‐crystal X‐ray diffraction and DSC measurements. The sensitivities towards impact, friction and electrical discharge were determined. In addition, detonation parameters (e.g. heat of explosion, detonation velocity) of the target compound were computed using the EXPLO5 code based on the calculated (CBS‐4M) heat of formation and X‐ray density.