Enzymatic transformation of cephalosporin C to 7-ACA by simultaneous action of immobilized d-amino acid oxidase and glutaryl-7-ACA acylase

The enzymatic transformation of cephalosporin C (CEPH C) to 7-amino-cephalosporanic acid (7-ACA) using D-amino acid oxidase (DAO) and glutaryl-7-ACA acylase (G1-7-ACA) is reported. The enzymes have been immobilized separately on different carriers, in order to maximize the catalytic activity and the stability. The reaction has been carried out in single-step-like conditions, using the two enzymes simultaneously. The effect of catalase contamination, present in the DAO preparations, was balanced by addition of extra hydrogen peroxide. In optimum conditions, the conversion of CEPH C to 7-ACA was higher than 90%, with byproduct formation lower than 4%. The mixture of immobilized enzymes was reused in repeated reaction cycles, showing an appreciable operational stability.     

Purification and stability of glutaryl-7-ACA acylase from pseudomonas sp.

The enzyme glutaryl-7-ACA acylase fromPseudomonas sp. NCIMB 40474, produced by a recombinantEscherichia coli host, was purified to homogeneity. The enzyme is a tetramer composed of two couples of asymmetric dimers, each of them constituted of two subunits of mol wt 18 and 52 kDa, respectively. It was found that glutaric acid, one of the products of the substrate hydrolysis, is an effective acylase inhibitor. Between pH 6.0 and pH 10.0, the enzymatic activity is almost constant, but below pH 6.0 it progressively declines. The acylase activity decreased sharply as a function of guanidine HC1 concentration. The loss is significant even at concentrations of denaturant lower than those causing unfolding, as suggested by UV spectroscopy and fluorescence emission studies. In these conditions (low denaturant concentration and low pH) the inactivation of the enzyme is caused by the tetramer dissociation into dimers. The lability of the quaternary structure of the enzyme is a key feature that must be taken into account for the improvement of the catalyst stability.     

Reusability of entrapped cells of Pseudomonas diminuta for production of 7-aminocephalosporanic acid

Entrapped cells of P. diminuta were used for the production of 7-aminocephalosporanic acid (7-ACA), a key intermediate required for the production of most of the clinically used cephalosporin derivatives, i.e., semisynthetic cephalosporins. The repeated batch production of 7-ACA with entrapped cells of P. diminuta in different carriers were carried out for six cycles at optimal conditions. It was found that 33%, 38%, and 47% of activity was lost with chitosan, gelatin, and agar, respectively as immobilizing supports after the sixth cycle of operation.     

青霉素G酰化酶在含环氧基团的顺磁性聚合物微球上的固定化（英文）

青霉素G酰化酶(PGA)是一种重要的工业生物催化剂,常用于以青霉素G为底物生产7-氨基去乙酰氧基头孢烷酸(7-ADCA)和6-氨基青霉烷酸(6-APA)等半合成β-内酰胺类抗生素.然而,PGA较差的稳定性和可重复使用性能限制了其在工业上的广泛应用.因此,将PGA固定在固体载体上是很有必要的,可以形成一种可重复使用的高性能的多相催化剂.用于生物酶固定化的良好载体应具备以下条件:(1)载体表面具有可用于与生物酶多点结合的高密度的官能团;(2)载体具有较大的比表面积以固定更多的生物酶.通常情况下,可以通过减小载体的粒径来增加其比表面积,然而,小粒径的载体很难从反应混合液中分离出来,造成固定化酶回收使用困难.为了将聚合物微球的优异固定化性能与磁性纳米粒子的独特顺磁性结合起来,我们制备了一种含环氧基团的顺磁性聚合物微球作为PGA的固定化载体.但由于Fe_3O_4纳米颗粒具有较高的表面能,在反相悬浮聚合反应过程中容易团聚成大颗粒,从而导致制备的顺磁性聚合物微球的磁体含量、表面形貌和粒径分布存在差异.此外,Fe_3O_4纳米颗粒与聚合反应单体之间的相容性不好,使得部分磁性颗粒不能很好地包埋于聚合物微球内部,影响固定化酶的活性和操作稳定性.本文以N,N′–亚甲基双丙烯酰胺为交联剂,以甲基丙烯酸缩水甘油酯和烯丙基缩水甘油醚为功能性单体,用反相悬浮聚合方法在SiO_2包覆的Fe_3O_4纳米颗粒表面成功制备出含环氧基团的顺磁性聚合物微球.用SEM,FT-IR,XRD,VSM和低温氮气吸附等手段对含环氧基团的顺磁性聚合物微球进行了表征.研究了SiO_2对Fe_3O_4纳米颗粒的包覆和Fe_3O_4/SiO_2纳米颗粒的数量对于固定化酶的初始活性和操作稳定性的影响.SiO_2在反相悬浮聚合过程中发挥重要作用,用SiO_2对Fe_3O_4纳米颗粒进行亲水性改性,有效改善了Fe_3O_4纳米颗粒与聚合反应单体的相容性,将其引入反相悬浮聚合体系中,可以制备得到球形度好、粒径分布均匀和超顺磁性的含环氧基团的顺磁性聚合物微球,其中当Fe_3O_4/SiO_2纳米颗粒的质量比为7.5%时制备的含环氧基团的顺磁性聚合物微球具有最好的PGA固定化性能.PGA通过其活性非必需侧链基团–氨基与顺磁性聚合物微球表面的环氧基团的共价结合来制备顺磁性固定化酶,该固定化PGA的初始活性为430 U/g(wet),在外加磁场的作用下容易回收使用,重复使用10次后可保留99%的初始活性,具有良好的热稳定性和酸碱稳定性,具有较好的工业应用前景.     

Structure of cephalosporin acylase in complex with glutaryl-7-aminocephalosporanic acid and glutarate: insight into the basis of its substrate specificity.

BACKGROUND: Semisynthetic cephalosporins are primarily synthesized from 7-aminocephalosporanic acid (7-ACA), which is obtained by environmentally toxic chemical deacylation of cephalosporin C (CPC). Thus, the enzymatic conversion of CPC to 7-ACA by cephalosporin acylase (CA) would be of great interest. However, CAs use glutaryl-7-ACA (GL-7-ACA) as a primary substrate and the enzyme has low turnover rates for CPC. RESULTS: The binary complex structures of CA with GL-7-ACA and glutarate (the side-chain of GL-7-ACA) show extensive interactions between the glutaryl moiety of GL-7-ACA and the seven residues that form the side-chain pocket. These interactions explain why the D-alpha-aminoadipyl side-chain of CPC yields a poorer substrate than GL-7-ACA. CONCLUSIONS: This understanding of the nature of substrate specificity may be useful in the design of an enzyme with an improved performance for the conversion of CPC to 7-ACA. Additionally, the catalytic mechanism of the deacylation reaction was revealed by the ligand bound structures.     

乙烯基Ia3d介孔硅分子筛的环氧化及其固定化青霉素酰化酶(英文)

采用直接共聚法合成表面含有乙烯基的具有立方相Ia3d结构的介孔硅分子筛(V-ClMS),然后对乙烯基团进行环氧化制备得到表面环氧基功能化的介孔硅分子筛(E-CIMS),采用X射线衍射、N2吸附-脱附、透射电镜、热重分析和13C固体核磁共振对制备的介孔硅分子筛进行了表征.结果表明,表面含有乙烯基的V-ClMS介孔硅分子筛能被一步成功合成,并易于发生环氧化而获得表面环氧基功能化的E-CIMS介孔硅分子筛.将E-CIMS介孔硅分子筛作为载体用于固定化青霉素G酰化酶(PGA),研究了表面环氧基团对固定化PGA初活性和操作稳定性的影响.结果表明,随着表面环氧基团数量的增加,介孔硅分子筛孔径减小,表面疏水性增加,导致载酶量和初活性减小.但介孔硅分子筛表面适量的环氧基团能增强E-CIMS介孔硅分子筛与PGA之间的相互作用,从而提高固定化PGA的操作稳定性.     

Kinetic resolutions of racemic amines and alcohols catalyzed by an industrial glutaryl-7-aminocephalosporanic acid acylase with unexpected broad substrate specificity

An industrial glutaryl-7-aminocephalosporanic acid acylase (GAR) possesses a significant broad substrate specificity that crosses over the usual cephalosporanic skeleton. Enantioselective amidase and even esterase activities have been observed with all the glutarates of racemic substrates investigated, with a stereopreference for the (S)-enantiomer. The different physical–chemical properties of reagents and products allow their easy separation by solvent extraction, avoiding cumbersome chromatography or distillation processes during reaction work-up.     

Immobilization of ethylene bis-indenyl ligands on functionalized silica gel

Four ethylene bis-indenyl ligands containing tethers of various lengths were successfully immobilized on the surface of functionalized silica gel. The strategy of immobilization was based on catalytic thiol-ene coupling of terminal alkene groups in the tethers with surface thiol groups. Obtained materials have high BET surface area and pore volume. The method developed can be used for immobilization of catalytically active bis-indenyl metallocene complexes, thus preventing their dimerization and deactivation.     

青霉素酰化酶在含铁MCM-41介孔分子筛上的固定化研究

制备了具有长程有序结构、孔径分布狭窄的含铁MCM-41介孔分子筛，利用直接法和共价结合法将青霉素酰化酶固定在分子筛表面。结果表明，两种方法制备的固定化酶对青霉素G水解反应的表观活性分别为782U/g和256U／g；经6次连续操作使用，二者保持初始活性的49．4％和81．2％，后者的操作稳定性好于前者。共价结合法制备的固定化酶活性较低，是由于Fe—MCM-41表面修饰后比表面积和孔径明显减小所致。     

Immobilization of uricase within polystyrene using polymaleimidostyrene as a stabilizer and its application to uric acid sensor

A novel amperometric uric acid (UA) sensor has been developed by coating the surface of a gold electrode with a polystyrene (PS) membrane formed by 30 μL of a 30 mg mL⁻¹ PS chloroform solution combined with 30 μL of a 5 mg mL⁻¹ polymaleimidostyrene (PMS) solution as a dispersant for enzyme, uricase; this membrane has been successfully employed as an immobilization support for uricase. In the PS membrane, PMS forms micelle-like structures containing uricase in an active state. This immobilized uricase membrane permits the permeation of oxygen, which is consumed by the uricase reaction. A good linear relationship is obtained over the concentration range of 5-105 μM. The concentration of uric acid was determined at a negative potential based on the decrease in the reduction current of oxygen and the interference of l-ascorbic acid can be completely eliminated.     

Single-step conversion of cephalosporin-C to 7-Aminocephalosporanic acid by free and immobilized cells of <Emphasis Type="Italic">Pseudomonas diminuta</Emphasis>

7-Aminocephalosporanic acid (7-ACA), the starting material for the production of a number of clinically used semisynthetic cephalosporins, is produced by deacylation of cephalosporin-C. The production of 7-ACA was studied in various modes, at the optimal conditions using free and immobilized whole cells of Pseudomonas diminuta.     

Preconcentration of phthalic acid esters in water samples by Saccharomyces cerevisiae immobilized on silica gel

A sensitive and selective column adsorption method is proposed for the off-line preconcentration and determination of phthalic acid esters (PAEs), namely benzyl-butyl phthalate (BBP), di-n-butyl phthalate (DBP) and di-cyclohexyl phthalate (DCHP). The PAEs was preconcentrated on Saccharomyces cerevisiae immobilized on silica gel and then determined by high performance liquid chromatography (HPLC). Several parameters on the recovery of the analytes were investigated. Recoveries of BBP, DBP and DCHP were 100±2, 98±2 and 98±3%, respectively, at 95% confidence level under optimum conditions. The detection limits (3S/N) of BBP, DBP and DCHP were 3.2, 6.3 and 3.1 μg l⁻¹, respectively. The capacity of the adsorbent was also examined and found to be 1.4 mg g⁻¹ for BBP and DBP, and 3.6 mg g⁻¹ for DCHP. S. cerevisiae immobilized on silica gel is suitable for repeated use without decreasing recovery up to about 25 adsorption-elution cycles. The proposed method was successfully applied to the determination of PAEs in river water with high precision and accuracy.     

Adsorption of hydrogen sulfide on silicotungstic acid supported on silica gel

The interaction of H₂S with both massive and supported on SiO₂ silicotungstic acid at 300°C produces additional sites of H₂S adsorption.     

Immobilization of laccase by Cu2+ chelate affinity interaction on surface modified magnetic silica particles and its use for the removal of pentachlorophenol

Magnetic Cu²⁺-chelated silica particles using polyacrylamide as a metal-chelating ligand was developed and used for the immobilization of laccase by coordination.The effect of pH and temperature on the enzymatic property of immobilized laccase and its catalytic capacity for pentachlorophenol（PCP） degradation were evaluated systemically.Compared with free laccase,the immobilized laccase showed improved acid adaptabihty and thermal stability.The immobilized laccase prepared in this work exhibited a good catalytic capacity for PCP removal from aqueous solutions.     

负载型氨基酸离子液体的制备及其对二氧化碳的吸附性能

采用浸渍蒸发法将四甲基铵甘氨酸([N1111][Gly])和四甲基铵赖氨酸([N1111][Lys])两种离子液体分别负载到硅胶(SG)表面,利用EA、TGA、BET和FT-IR等技术对所得到的吸附剂进行表征,考察了离子液体种类、离子液体负载量和温度等条件对其CO_2吸附性能的影响。结果表明,离子液体成功负载到硅胶表面,所制得的负载型氨基酸离子液体对二氧化碳具有良好的吸附性能。在所考察的温度范围(303.15-323.15 K)内,温度越高,平衡吸附量越小;在负载量为10%-60%,随着负载量的增加,平衡吸附量先增加后减小。对于[N1111][Gly]/SG,当负载量为22.4%(质量分数)、吸附温度为30℃、压力为0.1 M Pa时,二氧化碳的平衡吸附量可达到41 mg/g(相对于1 mol AAILs吸附0.62 mol CO_2),而且,吸附20 min即可达到平衡吸附量的90%。吸附剂在循环使用六次之后,其结构与性能均保持良好。     

Polarography and artificial neural network for the simultaneous determination of nalidixic acid and its main metabolite (7-hydroxymethylnalidixic acid)

Nalidixic acid (NA) and its main metabolite, 7-hydroxymethylnalidixic acid (OH-NA), are simultaneously determined by applying artificial neural networks (ANNs), to their square wave voltammetric signals. The scores of a PCR model, built with the voltammetric data of a set of standard samples, recorded between −0.70 and −1.0 V, are used as training set for the net for each compound. The trained nets (ANNs) are used for the simultaneous determination of NA and OH-NA in urine. The recovery values are comprised between 91 and 109% for NA and between 82 and 112% for OH-NA, being these results better than the results obtained by application of partial least squares (PLS) multivariate calibration.     

化学修饰木瓜蛋白酶的固定化及性质研究

在底物保护和无底物保护下,用丁二酸酐对木瓜蛋白酶进行化学修饰,以三硝基苯磺酸法测定修饰酶的平均氨基修饰度,以棉布为载体,戊二醛为交联剂,对修饰前后的木瓜蛋白酶分别进行固定化.考察了温度、pH和表面活性剂SDS对化学修饰的固定化木瓜蛋白酶活力的影响,并与固定化天然木瓜蛋白酶进行了比较.研究表明,化学修饰固定化木瓜蛋白酶的最适反应温度为80℃;最适pH为9.0;在SDS浓度为20mg/mL时酶活也仍能保持在40%左右;米氏常数为187g/L.与天然的固定化酶相比,化学修饰的固定化木瓜蛋白酶的热稳定性、耐碱性和耐洗涤性得到了显著提高.     

Synthesis of spherical silica particles by sol‐gel method and application

Spherical silica particles were synthesized using the sol‐gel method by hydrolyzing tetraethyl orthosilicate (TEOS) with an alkali catalyst, and it was investigated how the experimental conditions (the reaction temperature, the concentration and dropping rate of the hydrolysis catalyst solution) affected the size and morphology of silica particles. Furthermore, the silica particles were doped with sodium fluoride to measure their ion release ability. The mean diameters of the silica particles changed according to the reaction temperature and the dropping rate of the hydrolysis catalyst, namely the higher the reaction temperature or the slower the dropping rate the smaller are the mean diameters. The surface area of the silica particles was significantly different depending on the dropping rate of the hydrolysis catalyst, namely the slower the dropping rate the larger the specific surface area. The specific heat capacity and thermal reduction (TG) of the silica particles were significantly different according to the reaction temperature, namely the higher the reaction temperature the lower the specific heat capacity and the TG. It was found that the fluoride‐retaining ability was proportional to the surface area of silica particles. The fluoride ion release was equilibrated on elapsing 5 min. Copyright © 2008 John Wiley & Sons, Ltd.     

Immobilization of calix[6]arene bearing carboxylic acid and amide groups on aminopropyl silica gel and its sorption properties for Cr(VI)

An aminopropyl silica gel-immobilized calix[6]arene (C[6]APS) containing both amide and acid moieties was prepared from p-tert-butylcalix[6]arene hexacarboxylate derivative and aminopropyl silica gel in the presence of N,N′-diisopropyl carbodiimide coupling reagent. C[6]APS was used to evaluate the sorption properties of Cr(VI) as a sorbent material. In sorption studies, it was observed that C[6]APS was highly effective at pH 1.5 for Cr(VI). The effect of parameters such as pH, sorbent dosage, contact time, initial Cr(VI) concentration and temperature on Cr(VI) sorption; the sorption isotherms were also studied. Maximum sorption capacity was obtained as 3.1 mg g^?1 at pH 1.5 and 25 °C for 1 h and 10.4 mg L^?1 initial Cr(VI) concentration. Thermodynamic parameters such as change in free energy, enthalpy, and entropy were also determined. In the isotherm studies, Langmuir and Freundlich isotherm models were applied and it was found that the experimental data confirmed to Freundlich isotherm model, and the batch sorption capacity of C[6]APS was calculated as 37.66 mg g^?1.     

Phosphomolybdic acid supported on silica gel and promoted with alkali metal ions as catalysts for the esterification of acetic acid by ethanol

Different ratios of phosphomolybdic acid PMA supported on silica gel (1–30 wt%) and promoted with alkali metal hydroxide have been prepared by an impregnation method and calcinated at 350 °C for 4 h. The catalysts were characterized by thermogravimetry (TG), differential thermal analysis (DTA), X-ray diffraction, FT-IR spectroscopy and N₂ adsorption measurements. The surface acidity and basicity of the catalysts were determined by adsorption of pyridine and the dehydration–dehydrogenation of 2-propanol. The gas-phase esterification of acetic acid by ethanol was carried out in a conventional flow bed reactor. The results clearly revealed that among the PMA loading, the use of 10 wt% catalyst showed maximum yield of ethyl acetate. This catalyst also improved on addition of Na or K-hydroxide. These results were correlated with the structure and the acid–base properties of the prepared catalysts.