Conductance study of the thermodynamics of ammonium ion complexes with several crown ethers in acetonitrile solution

A conductance study concerning the interaction between ammonium ion and several crown ethers in acetonitrile solution has been carried out at different temperatures. The stability constants of the resulting 11 complexes at various temperatures were determined from the molar conductance-mole ratio data and found to vary in the order DC18C6>18C6>DB30C10>DB21C7>DB24C8>DB18C6>15C5>B15C5. The enthalpy and entropy of complexation were determined from the temperature dependence of the formation constants. The influence on the thermodynamic data of different parameters such as cavity size and dimensionality of crown ethers, nature of substituents in the polyether ring, conformations of the free and complexed ligands, solvent-ligand interaction and number of N–H bonds available for hydrogen bonding are discussed.     

Complex formation of hydronium ion with several crown ethers in 1,2-dichloroethane,acetonitrile, and nitrobenzene solutions

A conductance study concerning the interaction between hydronium ion and several crown ethers in acetonitrile, nitrobenzene and 1,2-dichloroethane solutions has been carried out at 25°C. The stability constants of the resulting 1:1 complexes in acetonitrile and nitrobenzene solutions were determined from the molar conductance-mole ratio data and found to vary in the order 18C6>DB30C10>DC18C6>DB18C6>DB21C7>DB24C8>B15C5. In 1,2-dichloroethane solution, the complexation process results in the dissociation of ion pairs. There is an inverse relationship between the stabilities of the complexes and the Gutmann donicity of the solvents. In nitrobenzene solution, some evidence for the formation of a 2:1 sandwich adduct between the smaller crowns (i.e., B15C5 and 18-crowns) are observed from the molar conductance-mole ratio data which is supported by the¹H NMR data.     

Conductance study of complex formation of thallium and silver ions with several crown ethers in acetonitrile,acetone and dimethylformamide solutions

The complexation reactions between Tl⁺ and Ag⁺ ions and several crown ethers have been studied conductometrically in acetonitrile, acetone and dimethylformamide solutions at 25°C. The stability constants of the resulting 1:1 complexes were determined, and found to decrease in the order DA18C6>DC18C6>DB30C10>18C6>DB21C7>DB24C8>DB18C6>B15C5 >12C4, in the case of Tl⁺ complexes, and in the order DA18C6>DC18C6>18C6>DB18C6 >DB24C8>DB30C10B15C5>DB21C7 for Ag⁺ complexes. There is an inverse relationship between the stabilities of the complexes and the Gutamnn donicity of the solvents. The influence of a number of atoms in the macrocycle and of substituents in the polyether ring on the stability of the complexes is discussed.     

The luminescent properties of divalent europium complexes of crown ethers and cryptands

The luminescent properties of divalent europium complexes with crown ether, azacrown ether, N-pivot-azacrown ether, and cryptand in methanol or water have been systematically investigated under UV irradiation. These divalent europium complexes show greatly enhanced emission from 417 nm to 488 nm in the visible blue region in comparison with that of the methanol solution of EuCl₂. The aqueous solution of EuCl₂ is non-luminescent. This obvious distinction in luminescent properties between the macrocyclic ligand-coordinated divalent europium and uncoordinated divalent europium is attributed to the “insulation effect” of Eu²⁺ ion from the solvent molecules of CH₃OH and H₂O by the macrocyclic crown ether or cryptand encapsulation to divalent europium. Moreover, these macrocyclic ligands provide an additional restriction to the electronic charge expansion of the excited Eu²⁺. This also contributes to the enhancement of the Eu²⁺ luminescence. Among all the investigated macrocyclic ligands, 15-crown-5 (15C5) affords the largest enhancement to the Eu²⁺ emission. The intensity of the Eu²⁺–15C5 complex is 690 times that of the EuCl₂ methanol solution with the same Eu²⁺ concentration. This special emission enhancement effect is related to the particular complex composition of 1:3 (Eu²⁺:15C5) and corresponding configuration of Eu²⁺–15C5 complex in methanol. Concerning the mechanism, the luminescence enhancement of divalent europium by complexation with these macrocyclic crown ether or cryptand ligands is found to be initiated from the decrease in non-radiative rate constant rather than from the increase in radiative one.

The divalent europium complexes of methacrylate polymeric polyether derivatives such as 15C5-, 18-crown-6- (18C6), and cryptand [2.2.1]- or [2.2.2]-containing polymer and copolymer have also been prepared. Their luminescent properties in solid state have been studied to aim for practical application. As a similar situation to the simple polyether complexes, the divalent europium complex with 15C5-containing polymer or copolymer shows the largest luminescent enhancement effect. Its emission intensity reaches about 20% that of the commercial inorganic luminescence product CaWO₄:Pb (NBS 1026). In addition, the doping effect of several divalent ions, namely Mg, Sr, Ba and Zn in polymeric complexes, has also been investigated according to the luminescence concentration quenching mechanism in solid state luminescence materials. The emission intensity of 15C5-containing polymer europium(II) complex is raised to twice stronger by doping of Zn²⁺ ion.     

The complexation of alkali metal ions by crown ethers,aza crown ethers,and cryptands in propylene carbonate

The reactions between alkali metal ions and crown ethers, aza crown ethers, and cryptands in propylene carbonate were studied by potentiometric and calorimetric titrations. The most stable complexes formed by macrocyclic and macrobicyclic ligands are when the ligand and cation dimensions are comparable. On comparing the complex stabilities of crown ethers and aza crown ethers of the same size, crown ethers were, on the whole, found to form the most stable complexes, with the exception of the lithium cation. Enthalpic factors are responsible. Substitution of the amino group protons of the aza crown ethers by benzyl groups leads to a high increase in values of the reaction enthalpy. This effect is partly compensated by entropic contributions. The bulky benzyl groups reduce the ligand solvent interactions and induce a ligand conformation with the lone pair of electrons from the nitrogen donor atoms which are more or less directed inside the cavity. The thermodynamic data for the transfer from methanol to propylene carbonate indicate that the ligands containing nitrogen show specific interactions with methanol.This paper is dedicated to Professor H. Strehlow on the occasion of his 70th birthday.     

Selective functionalization of crown ethers via arene chromium tricarbonyl complexes

The crown ethers dibenzo-16-crown-4 and dibenzo-18-crown-5 and a diaryl polyether were complexed by the chromium tricarbonyl group for the purpose of selective functionalization. This complexation did indeed permit exclusive functionalization of the complexed ring. CHO and CH₂OH functionalities were introduced ortho to the ether group. It was noted that the nature of the two ether chains had a strong influence on the regioselectivity of the functionalization, which occurred preferentially on the side with the polyether chain. Photochemical decomplexation produced functionalized organic crown ethers.     

Sodium and potassium benzeneazophosphonate complexes with crown ethers: Solid-state microwave synthesis, characterization and biological activity

The eco-friendly synthesis, spectroscopic (IR, MS, ¹H and ¹³C NMR) study and biological (cytostatic, antiviral) activity of sodium and potassium benzeneazophosphonate complexes, obtained by reaction in the solid state under microwave irradiation of the alkali salts of ethyl [α-(4-benzeneazoanilino)-N-benzyl]phosphonic acid and [α-(4-benzeneazoanilino)-N-4-methoxybenzyl]phosphonic acid with crown ethers containing 18-membered (dibenzo-18-crown-6 and bis(4′-di-tert-butylbenzo)-18-crown-6), 24-membered (dibenzo-24-crown-8) and 30-membered (dibenzo-30-crown-10) macrocyclic rings, have been described. The simple work-up solvent free reaction is an efficient green procedure for the formation of mononuclear crown ether complexes in which the sodium/potassium ion is bound to oxygen atoms of the macrocycle and the phosphonic acid oxygen. The free crown ethers, alkali benzeneazophosphonate salts and their complexes were evaluated for their cytostatic activity in vitro against murine leukemia L1210, murine mammary carcinoma FM3A and human T-lymphocyte CEM and MT-4 cell lines, as well as for their antiviral activity against a wide variety of DNA and RNA viruses. The investigated compounds showed no specific antiviral activity, whereas all the free crown ethers and their complexes demonstrated cytostatic activity, which was especially pronounced in the case of bis(4′-di-tert-butylbenzo)-18-crown-6 and its complexes.     

Microwave-assisted fast and efficient synthesis of some crown ethers

13-Crown-4,16-crown-5,dibenzo-12-crown-4 and dibenzo-14-crown-4 were synthesized by a one-pot microwave-assisted procedure in good yields.Irradiation of diols and dichlorides in the presence of sodium hydroxide in DMSO gave title crown ethers presumably within a template effect.     

Convenient synthesis of aryl-incorporated ditosylates and their application in preparation of crown ethers with higher yield

A convenient synthetic method with high yields for aryl-incorporated ditosylates by reaction of aryl-incorporated diols with TsCI in THF/NaOH/H2O solution was described. Some of these aryl-incorporated ditosylates reacted with diphenols to produce crown ethers in pleasant yield.     

Chiral recognition in NMR spectroscopy using crown ethers and their ytterbium(III) complexes

Chiral crown ethers 1 and 5 are useful enantiomeric discriminating agents in ¹H NMR spectroscopy for neutral and protonated primary amines, amino acids, and amino alcohols. The presence of the carboxylic acid groups in 1 and 5 provide sites at which ytterbium(III) can bind. Adding ytterbium(III) nitrate to crown–substrate mixtures in methanol-d₄ causes shifts in the spectra of substrates and often enhances the chiral discrimination in the ¹H NMR spectrum. The enhancement in enantiomeric discrimination that occurs in the presence of ytterbium(III) allows lower concentrations of the crown ether to be used in chiral recognition studies. Several amide derivatives of 1 were prepared and evaluated as chiral NMR discriminating agents, although except for 1e, these were less effective than 1.     

Complex formation of alkaline-earth cations with crown ethers and cryptands in methanol solutions

The complexation of alkaline-earth cations by different crown ethers, azacrown ethers, and cryptands has been studied in methanol solutions by means of calorimetric and potentiometric titrations. The smallest monocyclic ligands examined form 21 complexes (ratio of ligand to cation) with cations which are too large to fit into the ligand cavity. With the smallest cryptand, only Sr²⁺ and Ba²⁺ ions are able to form exclusive complexes. In the case of the reaction of cryptand (211) with Ca²⁺, a separate estimation of stability constants for the formation of exclusive and inclusive complexes was possible for the first time. Higher values for stability constants are found for the reaction of alkaline-earth cations with cryptands compared to the reaction with alkali ions. This increase is only caused by favorable entropic contributions.     

The role of crown ethers in drug delivery

The unique structure of the crown ethers has attracted the attention of many scientists to the use of these compounds in organic synthesis, and drug delivery. In recent years, extensive research has been conducted on the use of crown ethers in the drug delivery process. In the drug delivery process, the use of compounds that can act selectively is very important. Crown ethers with their unique structure can appear in various roles in drug delivery. In recent years, the use of crown ethers in the formulation of nano-drugs have attracted the attention of many researchers, and it shows that crown ethers have a great potential in the process of drug delivery. In fact, chemistry plays a role as a medium for transferring information from suitable compounds to drug delivery. Reviewing the results of the research provides the opportunity to create new ideas for using crown ether in new drug delivery systems.     

Coamplexation of mercury(II) compounds by crown ethers in organic media

Complexes between crown ethers having ring sizes of 15–24 atoms and 5 to 8 oxygens with HgX₂ species (X = Cl, I, CN, SCN) have been prepared and studied. Interactions of the substituents X bound to mercury with groups or fragments in the crown compound are essential in determining the characteristics and stability of the complexes formed. Complexes with crowns of 18C6 ring sizes are the most favourable except for HgX₂ compounds for which the size of X is larger than the macrocycle ring, as is the case for X = CF₃.     

Sodium-23, cesium-133 and thallium-205 NMR study of sodium,cesium and thallium complexes with large crown ethers in nonaqueous solutions

Formation constants for complexes of dibenzo-21-crown-7, dibenzo-24-crown-8 and dibenzo-27-crown-9 with the Na⁺, Cs⁺ and Tl⁺ ions have been determined by multinuclear NMR measurements in several nonaqueous solvents. The measurements of the cesium complexes were carried out at different temperatures and the enthalpy and entropy of complexation were determined from the temperature dependence of the formation constants.The stabilities of these complexes in solvents of low to medium donicity, —nitromethane, acetonitrile, acetone, methanol, and propylene carbonate, vary in the order Tl⁺>Cs⁺>Na⁺. Depending on the relative sizes of the cation and of the ligand cavity, either a three-dimensional wrap-around complex or a two-dimensional crown complex are formed. For the cesium complexes, the values of H _c ^o and S _c ^o are definitely solvent-dependent and in all cases the complexes are enthalpy stabilized but entropy destabilized. A compensating effect is observed in the variation of the enthalpy and entropy of complexation so that the overall influence of the above solvents on the stability of the complexes is rather limited.     

Synthesis and fluorescence behaviour of crown and azacrown ethers carrying the dansyl fluorophore as a pendant in acetonitrile solution

The influence of Li⁺, Na⁺, K⁺, Cs⁺, Mg²⁺, Ca²⁺, Sr²⁺, Ba²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Pb²⁺ and Al³⁺ ions on the spectroscopic properties of the dansyl group covalently linked to crown ether or diazacrown ethers was investigated by means of absorption and emission spectrophotometry. Interaction of the alkali metal ions with all fluoroionophores studied is weak, while alkaline earth metal ions interact strongly causing about 50% quenching of dansyl fluorescence of A21C5-Dns and A₂18C6-Dns. The Cu²⁺, Pb²⁺ and Al³⁺ cations interact very strongly with dansyl chromophore regardless the crown ether type, causing a major change in absorption spectrum of the chromophore and forming non-fluorescent complexes. The Co²⁺, Ni²⁺, Zn², Mg²⁺ and Ag⁺ cations interact moderately with all fluoroionophores studied causing about 20% of fluorescence quenching of dansyl, except for a strong dansyl fluorescence quenching of 15C5-Dns by Co²⁺ ion. The quenching efficiency of didansylated fluoroionophores by the alkali metal ions and alkaline earth metal ions is weaker than monodansylated ones.     

Utilisation of crown ethers in microemulsion electrokinetic chromatography for the separation of inorganic cations

A new method to influence the separation selectivity of inorganic cations in capillary electrophoresis is presented. This method combines the use of certain crown ethers to form complexes with a specific cation (changing its ionic radius/charge ratio and thereby its electrophoretic mobility) with partitioning of the crown ether/analyte complex between an aqueous phase and a pseudo-stationary phase, such as the oil droplet of a microemulsion. Several microemulsions, including uncharged oil droplets and oil droplets with different degrees of surface charge were tested to evaluate their ability to improve the separation of the selected analytes.     

Thermochemical behaviour of crown ethers aqueous organic solvents: Part IV: Propanol and acetonitrile with water mixtures

Enthalpies of solution of 15-crown-5 (15C5) in the mixtures of water with acetonitrile (AN) or propan-1-ol (PrOH) and benzo-15-crown-5 ether (B15C5) in the PrOH-water mixtures have been measured at 298.15 K. The values of standard enthalpies of solution of 15C5 are negative in the mixtures of water with AN within the whole range of mixture composition and in the mixtures water-PrOH for water content x_w>0.1 and those of B15C5 are positive (except the standard enthalpy of B15C5 in pure water) in the system water-PrOH. The results of the calorimetric measurements together with the earlier data for B15C5 in water-acetonitrile mixtures are discussed with regard to the intermolecular interactions that occur in these systems.This revised version was published online in November 2005 with corrections to the Cover Date.     

Conductance of 1,1-electrolytes in acetonitrile solutions from −40° to 35°C

Conductance data for perchlorates of Li⁺, K⁺, Me₄N⁺, Et₄N⁺, Pr₄N⁺, Bu₄N⁺, iodides of K⁺, Me₄N⁺, i-Am₃BuN⁺, and tetraphenylborates of Na⁺, Bu₄N⁺ and i-Am₃BuN⁺ in acetonitrile solution in the temperature range −40° to 35°C are reported. Λ_° (limiting molar conductance) and K_A (association constant) are evaluated for several temperatures using a conductance equation based on the chemical model of electrolyte solutions including short range forces. Limiting molar ion conductances, λ _ΰ ⁱ , at −35°, −25°, −15°, −5°, 5°, 15° and 25°C are evaluated from temperature dependent limiting transference numbers. Enthalpies and entropies of association, obtained from the temperature dependence of the association constants, are also presented. Dedicated to the memory of Professor Raymond M. Fuoss.     

Conductance studies of some ammonium and alkali metal salts in propylene carbonate

Conductance data are reported for NaI, KI, RbI, CsI, NH₄I, NaClO₄, and KClO₄ in propylene carbonate at 25°C in the concentration range 1×10^–4 –8.3×10^–3M. Analysis of the data with the current conductance theories indicates negligible ion-association, strong cation-solvent and weak anion-solvent interactions.