Intervalent Bis(μ‐aziridinato)MII?MI Complexes (M=Rh,Ir): Delocalized Metallo‐Radicals or Delocalized Aminyl Radicals?

Reactions of the methoxo complexes [{M(mu-OMe)(cod)}(2)] (cod=1,5-cyclooctadiene, M=Rh, Ir) with 2,2-dimethylaziridine (Haz) give the mixed-bridged complexes [{M(2)(mu-az)(mu-OMe)(cod)(2)}] [(M=Rh, 1; M=Ir, 2). These compounds are isolated intermediates in the stereospecific synthesis of the amido-bridged complexes [{M(mu-az)(cod)}(2)] (M=Rh, 3; M=Ir, 4). The electrochemical behavior of 3 and 4 in CH(2)Cl(2) and CH(3)CN is greatly influenced by the solvent. On a preparative scale, the chemical oxidation of 3 and 4 with [FeCp(2)](+) gives the paramagnetic cationic species [{M(mu-az)(cod)}(2)](+) (M=Rh, [3](+); M=Ir, [4](+)). The Rh complex [3](+) is stable in dichloromethane, whereas the Ir complex [4](+) transforms slowly, but quantitatively, into a 1:1 mixture of the allyl compound [(eta(3),eta(2)-C(8)H(11))Ir(mu-az)(2)Ir(cod)] ([5](+)) and the hydride compound [(cod)(H)Ir(mu-az)(2)Ir(cod)] ([6](+)). Addition of small amounts of acetonitrile to dichloromethane solutions of [3](+) and [4](+) triggers a fast disproportionation reaction in both cases to produce equimolecular amounts of the starting materials 3 and 4 and metal--metal bonded M(II)--M(II) species. These new compounds are isolated by oxidation of 3 and 4 with [FeCp(2)](+) in acetonitrile as the mixed-ligand complexes [(MeCN)(3)M(mu-az)(2)M(NCMe)(cod)](PF(6))(2) (M=Rh, [8](2+); M=Ir, [9](2+)). The electronic structures of [3](+) and [4](+) have been elucidated through EPR measurements and DFT calculations showing that their unpaired electron is primarily delocalized over the two metal centers, with minor spin densities at the two bridging amido nitrogen groups. The HOMO of 3 and 4 and the SOMO of [3](+) and [4](+) are essentially M--M d-d sigma*-antibonding orbitals, explaining the formation of a net bonding interaction between the metals upon oxidation of 3 and 4. Mechanisms for the observed allylic H-atom abstraction reactions from the paramagnetic (radical) complexes are proposed.     

Stepwise Construction of Polynuclear Complexes of Rhodium and Iridium Assisted by Benzimidazole-2-thiol. NMR and X-ray Diffraction Studies

Reactions of [M(2)(&mgr;-Cl)(2)(cod)(2)] (cod = 1,5-cyclooctadiene, M = Rh, Ir) with benzimidazole-2-thiol (H(2)Bzimt) afford the mononuclear complexes [MCl(H(2)Bzimt)(cod)] (M = Rh (1), Ir (2)) for which a S-coordination of the ligand is proposed based on their spectroscopic data. The dinuclear complexes [M(2)(&mgr;-HBzimt)(2)(cod)(2)] (M = Rh (3), Ir (4)) are isolated from the reaction of [M(acac)(cod)] and benzimidazole-2-thiol. They contain the monodeprotonated ligand (HBzimt(-)) bridging the two metals in a &mgr;(2)-(1kappaN,2kappaS) coordination mode and in a relative cis,cis-HT arrangement. Complexes 3 and 4 react with the appropriate species [M(cod)(Me(2)CO)(2)](+) to afford the trinuclear cationic aggregates [M(3)(&mgr;-HBzimt)(2)(cod)(3)](+) (M = Rh (5), Ir (6)) and with the [M'(2)(&mgr;-OMe)(2)(cod)(2)] compounds to give the homo- and heterotetranuclear complexes [MM'(&mgr;-Bzimt)(cod)(2)](2) (M = M' = Rh (7), Ir (8); M = Ir, M' = Rh (9)) containing the dideprotonated ligand (Bzimt(2)(-)). The trinuclear neutral complexes [M(3)(&mgr;-Bzimt)(&mgr;-HBzimt)(cod)(3)] are intermediates detected in the synthesis of the tetranuclear complexes. Protonation of 9 with HBF(4) gives the unsymmetrical complex [Ir(2)Rh(&mgr;-HBzimt)(2)(cod)(3)]BF(4) (10). This reaction involves the protonation of the bridging ligands followed by the removal of one "Rh(cod)" moiety to give a single isomer. The molecular structure of [Rh(2)(&mgr;-Bzimt)(cod)(2)](2) (7) has been determined by X-ray diffraction methods. Crystals are monoclinic, space group P2(1)/n, a = 20.173(5) ?, b = 42.076(8) ?, c = 10.983(3) ?, beta = 93.32(2) degrees, Z = 8, 7145 reflections, R = 0.0622, and R(w) = 0.0779. The complete assignment of the resonances of the (1)H NMR spectra of the complexes 3, 4, and 7-9 was carried out by selective decoupling, NOE, and H,H-COSY experiments. The differences in the chemical shifts of the olefinic protons are discussed on the basis of steric and magnetic anisotropy effects.     

Chiral iridium [corrected] xyliphos complexes for the catalytic imine hydrogenation leading to the metolachlor herbicide: isolation of catalyst-substrate adducts

Iridium complexes relevant to the catalytic enantioselective hydrogenation of 2-methyl-6-ethylphenyl-1'-methyl-2'-methoxyethylimine (MEA-imine, 1) in the Syngenta Metolachlor (3) process were prepared and characterized. Reaction of the diphosphane (S)-1-[(R)-2-(diphenylphosphanyl)ferrocenyl]ethyldi(3,5-xylyl)phosphane ((S)-(R)-Xyliphos, (S)-(R)-4) with [Ir(2)(micro-Cl)(2)(cod)(2)] (cod=1,5-cyclooctadiene) afforded [Ir(Cl)(cod)[(S)-(R)-4]] (7), which reacted with AgBF(4) to form [Ir(cod)[(S)-(R)-4]]BF(4) (8). Complexes 7 and 8 reacted with iodide to yield [Ir(I)(cod)[(S)-(R)-4]] (9). When 9 was treated with one and two equivalents of HBF(4), two isomers of the cationic Ir(III) iodo hydrido complex [Ir(I)(H)(cod)[(S)-(R)-4]]BF(4) were solated (10 and 11, respectively). Complex 9 was oxidized with one equivalent of I(2) to give the iodo-bridged dinuclear species [Ir(2)I(2)(micro-I)(3)[(S)-(R)-4](2))]I (12). [Ir(2)(micro-Cl)(2)(coe)(4)] (coe=cyclooctene) reacted with (S)-(R)-4 to yield the chloro-bridged dinuclear complex [Ir(2)(micro-Cl)(2)[(S)-(R)-4](2)] (13). Complexes 7-12 were structurally characterized by single-crystal X-ray diffraction and tested as single-component catalyst precursors for enantioselective hydrogenation of MEA-imine. Complex 10 and dinuclear complex 12 gave the best catalytic results. Efforts were also directed at isolating substrate- or product-catalyst adducts: Treatment of 8 with 2,6-dimethylphenyl-1'-methyl-2'-methoxyethylimine (DMA-imine, 14, a model for 1) under H(2) allowed four isomers of [Ir(H)(2)[(S)-(R)-4](14)]BF(4) (18-21) to be isolated. These analytically pure isomers were fully characterized by 2D NMR techniques. X-ray structural analysis of an Ir(I)-imine adduct, namely, [Ir(C(2)H(4))(2)(14)]BF(4) (25), which was prepared by reacting [IrCl(C(2)H(4))(4)] with [Ag(14)(2)]BF(4) (16), confirmed the kappa(2) coordination mode of imine 14.     

Rapid ketone transfer hydrogenation by employing simple, in situ prepared iridium(I) precatalysts supported by "non-N--H" P,N ligands

The catalytic utility in ketone transfer hydrogenation (TH) of the preformed complexes [Ir(cod)(kappa(2)-2-NMe(2)-3-PiPr(2)-indene)](+)X(-) ([2 a](+)X(-); X: PF(6), BF(4), and OTf; cod: eta(4)-1,5-cyclooctadiene; OTf: trifluoromethanesulfonate), [Ir(cod)(kappa(2)-1-PiPr(2)-2-NMe(2)-indene)](+)OTf(-) ([2 b](+)OTf(-)), [Ir(cod)(kappa(2)-2-NMe(2)-3-PiPr(2)-indenide)] (3), and [Ir(cod)(kappa(2)-o-tBu(2)P-C(6)H(4)-NMe(2))](+)PF(6) (-) ([4](+)PF(6) (-)), as well as of related mixtures prepared from [{IrCl(cod)}(2)] and various P,N-substituted indene or phenylene ligands, was examined. Whereas [2 a](+)X(-), [2 b](+)OTf(-), 3, and related in situ prepared Ir catalysts derived from P,N-indenes proved to be generally effective in mediating the reduction of acetophenone to 1-phenylethanol in basic iPrOH at reflux (0.1 mol % Ir; 81-99 % conversion) in a preliminary catalytic survey, the structurally related Ir catalysts prepared from (o-R(2)P-C(6)H(4))NMe(2) (R: Ph, iPr, or tBu) were observed to outperform the corresponding P,N-indene ligands under similar conditions. In the course of such studies, it was observed that alteration of the substituents at the donor fragments of the supporting P,N ligand had a pronounced influence on the catalytic performance of the derived catalysts, with ligands featuring bulky dialkylphosphino donors proving to be the most effective. Notably, the crystallographically characterized complex [4](+)PF(6) (-), either preformed or prepared in situ from a mixture of [{IrCl(cod)}(2)], NaPF(6), and (o-tBu(2)P-C(6)H(4))NMe(2), proved to be highly effective in mediating the catalytic transfer hydrogenation (TH) of ketones in basic iPrOH, with near quantitative conversions for a range of alkyl and/or aryl ketones and with very high turnover-frequency values (up to 230 000 h(-1) at >50 % conversion); this thereby enabled the use of Ir loadings ranging from 0.1 to 0.004 mol %. Catalyst mixtures prepared from [{IrCl(cod)}(2)], NaPF(6), and the chiral (alphaS,alphaS)-1,1'-bis[alpha-(dimethylamino)benzyl]-(R,R)-2,2'-bis(dicyclohexylphosphino)ferrocene (Cy-Mandyphos) ligand proved capable of mediating the asymmetric TH of aryl alkyl ketones, including that of the hindered substrate 2,2-dimethylpropiophenone with an efficiency (0.5 mol % Ir; 95 % conversion, 95 % ee) not documented previously in TH chemistry.     

Coordination features of a hybrid scorpionate/phosphane ligand exemplified with Iridium

Although the pentacoordinated complex [Ir{(allyl)B(CH(2)PPh(2))(pz)(2)}(cod)] (1; pz=pyrazolyl, cod=1,5-cyclooctadiene), isolated from the reaction of [{Ir(mu-Cl)(cod)}(2)] with [Li(tmen)][B(allyl)(CH(2)PPh(2))- (pz)(2)] (tmen=N,N,N',N'-tetramethylethane-1,2-diamine), shows behavior similar to that of the related hydridotris(pyrazolyl)borate complex, the carbonyl derivatives behave in a quite different way. On carbonylation of 1, the metal--metal-bonded complex [(Ir{(allyl)B(CH(2)PPh(2))(pz)(2)}CO)(2)(mu-CO)] (2) that results has a single ketonic carbonyl bridge. This bridging carbonyl is labile such that upon treatment of 2 with PMe(3) the pentacoordinated Ir(I) complex [Ir(CO){(pz)B(eta(2)-CH(2)CH=CH(2))(CH(2)PPh(2))(pz)}(PMe(3))] (3) was isolated. Complex 3 shows a unique fac coordination of the hybrid ligand with the allyl group eta(2)-bonded to the metal in the equatorial plane of a distorted trigonal bipyramid with one pyrazolate group remaining uncoordinated. This unusual feature can be rationalized on the basis of the electron-rich nature of the metal center. The related complex [Ir(CO){(pz)B(eta(2)-CH(2)CH=CH(2))(CH(2)PPh(2))(pz)}(PPh(3))] (4) was found to exist in solution as a temperature-dependent equilibrium between the cis-pentacoordinated and trans square planar isomers with respect to the phosphorus donor atoms. Protonation of 3 with different acids is selective at the iridium center and gives the cationic hydrides [Ir{(allyl)B(CH(2)PPh(2))(pz)(2)}(CO)H(PMe(3))]X (X=BF(4) (5), MeCO(2) (6), and Cl (7)). Complex 7 further reacts with HCl to generate the unexpected product [Ir(CO)Cl{(Hpz)B(CH(2)PPh(2))(pz)CH(2)CH(Me)}(PMe(3))]Cl (9; Hpz=protonated pyrazolyl group) formed by the insertion of the hydride into the Ir-(eta(2)-allyl) bond. In contrast, protonation of complex 4 with HCl stops at the hydrido complex [Ir{(allyl)B(CH(2)PPh(2))(pz)(2)}(CO)H(PPh(3))]Cl (8). X-ray diffraction studies carried out on complexes 2, 3, and 9 show the versatility of the hybrid scorpionate ligand in its coordination.     

Iridium-imine and -amine complexes relevant to the (S)-metolachlor process: structures, exchange kinetics, and C-H activation by Iri causing racemization

Iridium complexes of DMA-imine [2,6-dimethylphenyl-1'-methyl-2'-methoxyethylimine, 1 a) and (R)-DMA-amine [(1'R)-2,6-dimethylphenyl-1'-methyl-2'-methoxyethylamine, 2 a] that are relevant to the catalytic imine hydrogenation step of the Syngenta (S)-Metolachlor process were synthesized: metathetical exchange of [Ir2Cl2(cod)2] (cod=1,5-cyclooctadiene) with [Ag(1 a)2]BF4 and [Ag((R)-2 a)2]BF4 afforded [Ir(cod)(kappa2- -1 a)]BF4 (11) and [Ir(cod)(kappa2-(R)-2 a)]BF4 ((R)-19)), respectively. These complexes were then used in stopped-flow experiments to study the displacement of amine 2 a from complex 19 by imine 1 a to form the imine complex 11, thus modeling the product/substrate exchange step in the catalytic cycle. The data suggest a two-step associative mechanism characterized by k1=(2.6+/-0.3) x 10(2) M(-1) s(-1) and k2=(4.3+/-0.6) x 10(-2) s(-1) with the respective activation energies EA1=(7.5+/-0.6) kJ mol(-1) and EA2=(37+/-3) kJ mol(-1). Furthermore, complex 11 reacted with H2O to afford the hydrolysis product [Ir(cod)(eta(6-)-2,6-dimethylaniline)]BF4 (12), and with I2 to liberate quantitatively the DMA-iminium salt 14. On the other hand, the chiral amine complex (R)-19 formed the optically inactive eta6-bound compound [Ir(cod)(eta6-rac-2 a)]BF4 (rac-18) upon dissolution in THF at room temperature, presumably via intramolecular C-H activation. This racemization was found to be a two-step event with k'1=9.0 x 10(-4) s(-1) and k2=2.89 x 10(-5) s(-1), featuring an optically active intermediate prior to sp3 C-H activation. Compounds 11, 12, rac-18, and (R)-19 were structurally characterized by single-crystal X-ray analyses.     

Development of a highly efficient catalytic method for synthesis of vinyl ethers

A new method for the preparation of alkyl vinyl ethers has been developed. Thus, various types of alkyl vinyl ethers were synthesized by the reaction of alcohols with vinyl acetate under the influence of a catalytic amount of [Ir(cod)Cl]2 combined with Na2CO3 in good to excellent yields.     

Asymmetric hydrogenation of prochiral olefins catalysed by furanoside thioether-phosphinite Rh(I) and Ir(I) complexes

Thioether-phosphinite ligands (P-SR, R = Ph, Pr(I) and Me) bearing substituents with different steric demands on the sulfur centre were tested in the rhodium- and iridium-catalysed asymmetric hydrogenation of prochiral olefins. High enantiomeric excesses (up to 96%) and good activities (TOF up to 860 mol product x (mol catalyst precursor x h)(-1)) were obtained for alpha-acylaminoacrylates derivatives. Our results show that enantiomeric excesses depended strongly on the steric properties of the substituent in the thioether moiety, the metal source and the substrate structure. A bulky group in the thioether moiety along with the metal Rh had a positive effect on enantioselectivity. Reaction of these chiral ligands with [M(cod)2]BF4(M = Ir, Rh; cod = 1,5-cyclooctadiene) yielded complexes [M(cod)(P-SR)]BF4, which were present in only one diastereomeric form having the sulfur substituent in a pseudoaxial disposition. The addition of H2 to iridium complexes gave the cis-dihydridoiridium(iii) complexes [IrH2(cod)(P-SR)]BF4. For complexes [IrH2(cod)(P-SPh)]BF4 and [IrH2(cod)(P-SMe)] only one isomer was present in solution. However, for the complex [IrH2(cod)(P-Si-Pr)]BF4, which contained the more hindered substituent on sulfur, two isomers were detected. In all cases there was a pseudoaxial disposition of the sulfur substituents.     

Heterolytic activation of hydrogen as a trigger for iridium complex promoted activation of carbon-fluorine bonds

The cationic iridium(III) complex [IrCF(3)(CO)(dppe)(DIB)][BARF](2) where DIB = o-diiodobenzene, dppe = 1,2-bis(diphenylphosphino)ethane, and BARF = B(3,5-(CF(3))(2)C(6)H(3))(4)(-) undergoes reaction in the presence of dihydrogen to form [IrH(2)(CO)(2)(dppe)](+) as the major product. Through labeling studies and (1)H and (31)P[(1)H] NMR spectroscopies including parahydrogen measurements, it is shown that the reaction involves conversion of the coordinated CF(3) ligand into carbonyl. In this reaction sequence, the initial step is the heterolytic activation of dihydrogen, leading to proton generation which promotes alpha-C-F bond cleavage. Polarization occurs in the final [IrH(2)(CO)(2)(dppe)](+) product by the reaction of H(2) with the Ir(I) species [Ir(CO)(2)(dppe)](+) that is generated in the course of the CF(3) --> CO conversion.     

Evidence for a reactive (alkene)peroxoiridium(III) intermediate in the oxidation of an alkene complex with O2

An (alkene)peroxoiridium(III) complex, [Ir(L)(cod)(O(2))] [where LH = PhN=C(NMe(2))NHPh and cod = 1,5-cyclooctadiene], was identified as an intermediate in the reaction of the Ir(I) precursor [Ir(L)(cod)] with O(2) and characterized by spectroscopic methods. Decay of the intermediate and further reaction with 1,5-cyclooctadiene produced 4-cycloocten-1-one.     

Synthesis and characterization of cyclotetraphosphato complexes of Rh(I), Ir(I), Ru(II), and Pd(II)

The cyclotetraphosphate ion (P(4)O(12)(4)(-)) as a PPN (PPN = (PPh(3))(2)N(+)) salt reacts with [MCl(cod)](2) (M = Rh, Ir; cod = 1,5-cyclooctadiene) to give the dinuclear complexes (PPN)(2)[[M(cod)](2)(P(4)O(12))], in which the two metal moieties are situated trans to each other with respect to the P(4)O(4) ring in the solid state. In solution, however, these complexes exist as mixtures of trans and cis isomers. On the other hand, the P(4)O(12)(4)(-) ion reacts with 4 equiv of [Rh(cod)(MeCN)(x)](+) cation to give the tetranuclear complex [[Rh(cod)](4)(P(4)O(12))], where the four Rh(cod) fragments are bound to the P(4)O(12) platform alternately on both sides of the P(4)O(4) ring. Dinuclear P(4)O(12) complexes of ruthenium and palladium are also synthesized.     

Dipyridylketone as a versatile ligand precursor for new cationic heteroleptic cyclometalated iridium complexes

Three new bis-cyclometalated iridium(III) complexes, of general formula [Ir(2-phenylpyridine)(2)(L)](+), are reported. The compounds contain a dipyridine-type ligand (L) derived from di-2-pyridylketone (dipyridin-2-ylmethanol, 2,2'-(hydrazonomethylene)dipyridine and 3-hydroxy-3,3-di(pyridine-2-yl)propanenitrile) and were synthesized through two different reaction pathways. The alternative synthetic pathway herein proposed, namely the direct reactions on the complex [Ir(2-phenylpyridine)(2)(2,2'-dipyridylketone)](+), overcame the inconveniences encountered with the standard reaction between the dimeric precursor [Ir(2-phenylpyridine)(2)(μ-Cl)](2) and the ancillary ligands (L). The photophysical characterization of the iridium complexes reveals that modifications on the ancillary ligand introduce large changes in the photophysical behaviour of the complexes. High emission quantum yield is associated with the presence of a saturated carbon between the two pyridyl moieties: [Ir(2-phenylpyridine)(2)(2,2'-dipyridylketone)](+) and [Ir(2-phenylpyridine)(2)(2,2'-(hydrazonomethylene)dipyridine)](+) are extremely low emissive, while [Ir(2-phenylpyridine)(2)(dipyridin-2-ylmethanol)](+) and [Ir(2-phenylpyridine)(2)(3-hydroxy-3,3-di(pyridine-2-yl)propanenitrile)](+) are good photoemitters. DFT and TD-DFT calculations confirmed the mixed LC/MLCT character of the excited states involved in the absorption and emission processes and highlighted the role of the π-conjugation between the two subunits of the ancillary ligand in determining the nature of the LUMO.     

Dimethylsulfoxide as a ligand for RhI and IrI complexes--isolation, structure, and reactivity towards X-H bonds (X=H, OH, OCH3)

Novel neutral and cationic Rh(I) and Ir(I) complexes that contain only DMSO molecules as dative ligands with S-, O-, and bridging S,O-binding modes were isolated and characterized. The neutral derivatives [RhCl(DMSO)(3)] (1) and [IrCl(DMSO)(3)] (2) were synthesized from the dimeric precursors [M(2)Cl(2)(coe)(4)] (M=Rh, Ir; COE=cyclooctene). The dimeric Ir(I) compound [Ir(2)Cl(2)(DMSO)(4)] (3) was obtained from 2. The first example of a square-planar complex with a bidentate S,O-bridging DMSO ligand, [(coe)(DMSO)Rh(micro-Cl)(micro-DMSO)RhCl(DMSO)] (4), was obtained by treating [Rh(2)Cl(2)(coe)(4)] with three equivalents of DMSO. The mixed DMSO-olefin complex [IrCl(cod)(DMSO)] (5, COD=cyclooctadiene) was generated from [Ir(2)Cl(2)(cod)(2)]. Substitution reactions of these neutral systems afforded the complexes [RhCl(py)(DMSO)(2)] (6), [IrCl(py)(DMSO)(2)] (7), [IrCl(iPr(3)P)(DMSO)(2)] (8), [RhCl(dmbpy)(DMSO)] (9, dmbpy=4,4'-dimethyl-2,2'-bipyridine), and [IrCl(dmbpy)(DMSO)] (10). The cationic O-bound complex [Rh(cod)(DMSO)(2)]BF(4) (11) was synthesized from [Rh(cod)(2)]BF(4). Treatment of the cationic complexes [M(coe)(2)(O=CMe(2))(2)]PF(6) (M=Rh, Ir) with DMSO gave the mixed S- and O-bound DMSO complexes [M(DMSO)(2)(DMSO)(2)]PF(6) (Rh=12; Ir=in situ characterization). Substitution of the O-bound DMSO ligands with dmbpy or pyridine resulted in the isolation of [Rh(dmbpy)(DMSO)(2)]PF(6) (13) and [Ir(py)(2)(DMSO)(2)]PF(6) (14). Oxidative addition of hydrogen to [IrCl(DMSO)(3)] (2) gave the kinetic product fac-[Ir(H)(2)Cl(DMSO)(3)] (15) which was then easily converted to the more thermodynamically stable product mer-[Ir(H)(2)Cl(DMSO)(3)] (16). Oxidative addition of water to both neutral and cationic Ir(I) DMSO complexes gave the corresponding hydrido-hydroxo addition products syn-[(DMSO)(2)HIr(micro-OH)(2)(micro-Cl)IrH(DMSO)(2)][IrCl(2)(DMSO)(2)] (17) and anti-[(DMSO)(2)(DMSO)HIr(micro-OH)(2)IrH(DMSO)(2)(DMSO)][PF(6)](2) (18). The cationic [Ir(DMSO)(2)(DMSO)(2)]PF(6) complex (formed in situ from [Ir(coe)(2)(O=CMe(2))(2)]PF(6)) also reacts with methanol to give the hydrido-alkoxo complex syn-[(DMSO)(2)HIr(micro-OCH(3))(3)IrH(DMSO)(2)]PF(6) (19). Complexes 1, 2, 4, 5, 11, 12, 14, 17, 18, and 19 were characterized by crystallography.     

Iridium Complexes of 2,2′‐Bidipyrrins

The reaction of [{Ir(cod)(μ‐Cl)}₂] and K₂CO₃ or of [{Ir(cod)(μ‐OMe)}₂] alone with the non‐natural tetrapyrrole 2,2′‐bidipyrrin (H₂BDP) yields, depending on the stoichiometry, the mononuclear complex [Ir(cod)(HBDP)] or the homodinuclear complex [{Ir(cod)}₂(BDP)]. Both complexes react readily with carbon monoxide to yield the species [Ir(CO)₂(HBDP)] and [{Ir(CO)₂}₂(BDP)], respectively. The results from NMR spectroscopy and X‐ray diffraction reveal different conformations for the tetrapyrrolic ligand in both complexes. The reaction of [{Ir(coe)₂(μ‐Cl)}₂] with H₂BDP proceeds differently and yields the macrocyclic [4e^?,2H⁺]‐oxidized product [IrCl₂(9‐Meic)] (9‐Meic = monoanion of 9‐methyl‐9,10‐isocorrole), which can be addressed as an iridium analog of cobalamin.     

Addition of water across Si-Ir bonds in iridium complexes with κ-P,P,Si (biPSi) pincer ligands

Electrophiles such as Me(+), Ag(+), or protons react with the five-coordinate Ir(III) complex [IrClH(biPSi)] (biPSi = κ-P,P,Si-Si(Me){(CH(2))(3)PPh(2)}(2)) by abstracting its chloride ligand. The resulting species can be stabilized by a variety of L ligands to give the cationic complexes [IrH(biPSi)L(2)](+). The derivative [IrH(biPSi)(NCMe)(2)](+) has been subjected to a kinetic study regarding the facile dissociations of its acetonitrile ligands. The presence of water changes the course of the reaction producing dihydride complexes that contain the silanol ligand κ-O,P,P-HOSi(Me){(CH(2))(3)PPh(2)}(2) (biPSiOH). The water activation product [IrH(2)(biPSiOH)(NCMe)](CF(3)SO(3)) undergoes insertion reactions with ethylene and phenylacetylene. The use of hydrolyzable fluorinated counterions such as PF(6)(-) or BF(4)(-) further modifies the reaction by provoking the incorporation of fluoride at the silicon atom of the former biPSi ligand. The dihydride resulting after such a process, [IrH(2)(biPSiF)(NCMe)(2)]BF(4) (biPSiF = κ-P(2)-FSi(Me){(CH(2))(3)PPh(2)}(2)), displays a trans-chelating diphosphine ligand. When dehydrogenating the Ir center, spontaneously or using ethylene as hydrogen acceptor, the diphosphine backbone undergoes a Si-C bond cleavage leading to a new Ir(III) species with κ-P,Si and κ-C,P chelate ligands.     

Double geminal C-H activation and reversible alpha-elimination in 2-aminopyridine iridium(III) complexes: the role of hydrides and solvent in flattening the free energy surface

[H2Ir(OCMe2)2L2]BF4 (1) (L = PPh3), a preferred catalyst for tritiation of pharmaceuticals, reacts with model substrate 2-(dimethylamino)pyridine (py-NMe2; py = 2-pyridyl) to give chelate carbene [H2Ir(py-N(Me)CH=)L2]BF4 (2a) via cyclometalation, H2 loss, and reversible alpha-elimination. Agostic intermediate [H2Ir(py-N(Me)CH2-H)L2]BF4) (4a), seen by NMR, is predicted (DFT(B3PW91) computations) to give C-H oxidative addition to form the alkyl intermediate [(H)(eta2-H2)Ir(py-N(Me)CH2-)L2]BF4. Loss of H2 leads to the fully characterized alkyl [HIr(OCMe2)(py-N(Me)CH2-)L2]BF4 (3a(Me2CO)), which loses acetone to give alkylidene hydride 2a by rapid reversible alpha-elimination. 2a rapidly reacts with excess H2 in d6-acetone to generate [H2Ir(OC(CD3)2)2L2]BF4 (1-d12), 3a((CD3)2CO), and py-NMe2 in a 1:1:1 ratio, showing reversibility and accounting for the selective isotope exchange catalyzed by 1. Reaction of 1 with py-N(CH2)4 gives the fully characterized carbene 2c. A cis-L(2) carbene intermediate, cis-2c, observed by NMR, reacts with CO via retro alpha-elimination to give the alkyl 3cCO, while the trans isomer, 2c, does not react; retro alpha-elimination thus requires the Ir-H bond to be orthogonal to the carbene plane. Consistent with experiment, computational studies show a particularly flat PE surface with activation of the agostic C-H bond giving a less stable H2 complex, then formation of a kinetic carbene complex with cis-L, only seen experimentally for py-N(CH2)4. Hydrides at key positions, together with gain or loss of solvent and H2, flatten the PE (DeltaG) surfaces to allow fast catalysis.     

Synthesis and properties of Rh(I) and Ir(I) distibine complexes with organometallic co-ligands

The first series of Rh(I) distibine complexes with organometallic co-ligands is described, including the five-coordinate [Rh(cod)(distibine)Cl], the 16-electron planar cations [Rh(cod)(distibine)]BF4 and [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 and the five-coordinate [Rh(CO)(distibine)2][Rh(CO)2Cl2] (distibine=R2Sb(CH2)3SbR2, R=Ph or Me, and o-C6H4(CH2SbMe2)2). The corresponding Ir(I) species [Ir(cod)(distibine)]BF4 and [Ir{Ph2Sb(CH2)3SbPh2}2]BF4 have also been prepared. The complexes have been characterised by 1H and 13C{1H} NMR and IR spectroscopy, electrospray mass spectrometry and microanalysis. The crystal structure of the anion exchanged [Rh(CO){Ph2Sb(CH2)3SbPh2}2]PF(6).3/4CH2Cl2 is also described. The methyl-substituted distibine complexes are less stable than the complexes of Ph2Sb(CH2)3SbPh2, with C-Sb fission occurring in some of the complexes of the former. The salts [Rh(CO){Ph2Sb(CH2)3SbPh2}2]PF6 and [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 undergo oxidative addition with Br2 to give the known [RhBr2{Ph2Sb(CH2)3SbPh2}2]+, while using HCl gives the same hydride complex from both precursors, which is tentatively assigned as [RhHCl2{Ph2Sb(CH2)3SbPh2}]. An unexpected further Rh(III) product from this reaction, trans-[RhCl2{Ph2Sb(CH2)3SbPh2}{PhClSb(CH2)3SbClPh}]Cl, was identified by a crystal structure analysis and represents the first structurally characterised example of a chlorostibine coordinated to a metal. [Rh{Ph2Sb(CH2)3SbPh2}2]BF4 reacts with CO to give [Rh(CO){Ph2Sb(CH2)3SbPh2}2]BF4 initially, and upon further exposure this species undergoes further reversible carbonylation to give a cis-dicarbonyl species thought to be [Rh(CO)2{Ph2Sb(CH2)3SbPh2}{kappa1Sb-Ph2Sb(CH2)3SbPh2}]BF4 which converts back to the monocarbonyl complex when the CO atmosphere is replaced with N2.     

Stepwise synthesis of a hydrido, N-heterocyclic dicarbene iridium(III) pincer complex featuring mixed NHC/abnormal NHC ligands

We describe a stepwise synthesis of the hydrido, N-heterocyclic dicarbene iridium(III) pincer complex [Ir(H)I(C(NHC)CC(aNHC))(NCMe)] (3) which features a combination of normal and abnormal NHC ligands. The reaction of the bis(imidazolium) diiodide [(CH(imid)CHCH(imid))]I(2) (1) with [Ir(μ-Cl)(cod)](2) afforded first the mono-NHC Ir(I) complex [IrI(cod)(CH(imid)CHC(NHC))]I (2), which was then reacted with 2 equiv. of Cs(2)CO(3) in acetonitrile at 60 °C for 40 h to yield 3. These observations support our previously proposed mechanism for the formation of hydrido, N-heterocyclic dicarbene iridium(III) pincer complexes from the reaction of bis(imidazolium) salts with weak bases involving a mono-NHC Ir(I) intermediate. We describe the reactivity of the mono-NHC Ir(I) complex 2 under various conditions. By changing the reaction solvent from MeCN to toluene, we observed the cleavage of the imidazol-2-ylidene ring and the formation of an iminoformamide-containing mono-NHC Ir(I) complex [IrI(cod){[NHCH=CHN(Ad)CHO]CHC(NHC)}] (4). Complex 4 was also prepared in high yield from the reaction of 2 with strong bases (potassium tert-butoxide or potassium hexamethyldisilazane), via the initial formation of the complex [IrI(cod)(CH(NHC)CHC(NHC))] (5), which contains a coordinated NHC moiety and a free carbene arm, followed by subsequent hydrolysis of the latter. The bis(imidazolium) salt 1 can be deprotonated by strong bases to form the bis(carbene) ligand C(NHC)CHC(NHC) (6), which readily reacts with [Ir(μ-Cl)(cod)](2) to give the dinuclear complex [{IrI(cod)}(2)(μ-C(NHC)CHC(NHC))] (7), in which the N-heterocyclic bis(carbene) ligand bridges the two metals through the carbene carbon atoms.     

The preparation and characterisation of bimetallic iridium(II) complexes containing derivatised bridging naphthalene-1,8-disulfur or 4,5-dithiolato acephenanthrylene ligands

Oxidative addition of the disulfide compounds naphtho[1,8-cd][1,2]dithiole, 2-tert-butylnaptho[1,8-cd][1,2]dithiole, 2,7-di-tert-butylnaphtho[1,8-cd][1,2]dithiole, 4,5-dithiaacephenanthrylene and the thio/sulfinyl and thio/sulfonyl compounds naphtho[1,8-cd][1,2]dithiole 1-oxide, and naphtho[1,8-cd][1,2]dithiole 1,1-dioxide respectively to [[Ir(mu-Cl)(cod)](2)] give dinuclear Ir-Ir bonded Ir(II) compounds [[IrCl(cod)](2)(mu(2)-1,8-S(2)-nap)] 1, [[IrCl(cod)](2)(mu(2)-1,8-S(2)-2-(t)Bu-nap)] 2, [[IrCl(cod)](2)(mu(2)-1,8-S(2)-2,7-di-(t)Bu-nap)]] 3, [[IrCl(cod)](2)(mu(2)-4,5-S(2)-phenan)] 4, [[IrCl(cod)](2)(mu(2)-1-S,8-[S(O)]-nap)] 5 and [[IrCl(cod)](2)(mu(2)-1-S,8-[S(O)(2)]-nap)] 6 where the di-sulfur ligands act as bridges between the two Ir(II) metal centres. The compounds were obtained in moderate to good yields as orange or deep red powders or crystalline solids. Five of the new complexes have been structurally characterised and were found to have Ir-Ir bond lengths in the range 2.7630(8) to 2.8113(11) A.     

Catalyst‐Controlled Regiodivergent CH Borylation of Multifunctionalized Heteroarenes by Using Iridium Complexes

The regiodivergent C?H borylation of 2,5‐disubstituted heteroarenes with bis(pinacolato)diboron was achieved by using iridium catalysts formed in situ from [Ir(OMe)(cod)]₂/dtbpy (cod=1,5‐cyclooctadiene, dtbpy: 4,4′‐di‐tert‐butyl‐2,2′‐bipyridine) or [Ir(OMe)(cod)]₂/2 AsPh₃. When [Ir(OMe)(cod)]₂/dtbpy was used as the catalyst, borylation at the 4‐position proceeded selectively to afford 4‐borylated products in high yields (dtbpy system A). The regioselectivity changed when the [Ir(OMe)(cod)]₂/2 AsPh₃ catalyst was used; 3‐borylated products were obtained in high yields with high regioselectivity (AsPh₃ system B). The regioselectivity of borylation was easily controlled by changing the ligands. This reaction was used in the syntheses of two different bioactive compound analogues by using the same starting material.