A novel hyperbranched aromatic polyamide containing bithiazole: Synthesis,metal complexation and magnetic properties

Based on the polycondensation of bifunctional 2,2′-diamino-4,4′-bithiazole(DABT) and trifunctional 1,3,5-benzenetricarbonyl trichloride (BTC),a novel hyperbranched aromatic polyamide PBD was synthesized with excellent solubility and good thermal stability.The structure of the polymer was confirmed by FT-IR and 1H NMR spectrum.The calculated degree of branching of our product was 52%.By exploring the influence of several different solvent systems,the yield of the polymer increased in the solvent system of DM...     

SYNTHESIS AND CHARACTERIZATION OF HIGHLY ORGANO-SOLUBLE POLYIMIDES BASED ON ALICYCLIC 1,8-DIMETHYL-BICYCLO[2.2.2]OCT-7- ENE-2,3,5,6-TETRACARBOXYLIC DIANHYDRIDE AND AROMATIC DIAMINES

Organo-soluble alicyclic polyimides (ALPIs) were synthesized from an alicyclic dianhydride, 1,8-dimethylbicyclo[2.2.2] oct-7-ene-2,3,5,6-tetracarboxylic dianhydride (DMEA) and several multialkyl-substituted 4,4′-diaminodiphenylmethane compounds, including 3,3′-dimethyl-4,4′-diaminodiphenyl methane (DMDA), 3,3′,5,5′-tetramethyl-4,4′-diaminodiphenyl methane (TMDA) and 3,3′,5,5′-tetraethyl-4,4′-diaminodiphenylmethane (TEDA). For comparison, the aromatic polyimides (ARPIs) were synthesized from the aromatic dianhydride, 3,3′,4,4′-benzophenonetetracarboxylic dianhydride (BTDA) and the same diamines. The ALPIs exhibited better solubility and transparency,but worse thermal stabilities and mechanical properties than those of the ARPIs. And the ALPIs could be dissolved in common organic solvents, such as N-methyl-2-pyrrolidinone (NMP), N,N-dimethylformamide (DMF), N,N-dimethylacetamide (DMAc), chloroform, tetrahydrofuran, m-cresol and so on. The ALPI films had an UV-Vis cut-off at 320 nm and a transmittance of higher than 80% in the visible region. In addition, the ALPIs showed thermal decomposition temperatures (Td) of about 450℃, which was nearly 100℃ lower than that of the ARPIs.     

STUDY ON THE SYNTHESIS OF POLYPERFLUOROTRIAZINE——The Synthesis and Polymerization of a Novel α,ω-Diiodoperfluorooxaalkyl s-Triazine Monomer*

In order to investigate synthetic route of polyperfluorotriazine elastomer, 2-trifluoromethyl4,6-bis(4′-iodo-2′-oxahexafluorobutyl)-1,3,5-triazine (1), a novel triazine monomer, was synthesized from 5-iodo-3-oxa-octafluoropentanesulfonyl fluoride (2) in eight-steps. 2 was reduced by potassium sulfite to the sulfinate (3), which was treated with hydriodic acid to yield 5-iodo-3oxa-hexafluoropentanoic acid (4). Compound 4 was transformed to 5-iodo-3-oxa-hexafluoropentanenitrile (7) through the corresponding ester 5 and amide 6. The desired product 1 was prepared by acylation-cyclodehydration of the imidoylamidine 9, obtained by condensation of the nitrile 7 with the amidine 8.The various methods for the esterification of perfluorocarboxylic acid were studied and a possible mechanism for the transformation of perfluorosulfinate to the corresponding perfluorocarboxylic acid by hydriodic acid was proposed.Crude 1 contained compounds 6, 11, 13, as impurities which were removed by low temperature crystallization followed by filtration through a short alumina column. The monomer 1 was polymerized by UV-irradiation in the presence of Hg with or without solvent. Polyperfluorooxaalkyl triazine 17 thus obtained showed good thermal stability. In the main chain of the polymer there was no weak unit of the uncyclized ring. Polymer 17 had an average molecular weight of ca. 1.33—2.0×10~4 (D. P.=27—42) and the temperature of 10% weight loss in nitrogen was 340℃.     

(R)-1，1′-联萘手性单元通过溶胶凝胶法合成杂化硅干凝胶(英)

Precursor molecule (R)-6,6′-bis(triethoxysilylethen-2-yl)-2,2′-di(methoxyethoxymethyloxy)-1,1′-binaphthyl (R-2) was synthesized by Pd-catalyzed Heck reaction of (R)-6,6′-dibromo-2,2′-di(methoxyethoxymethyloxy)-1,1′-binaphthyl (R-1) intermediate with vinyltriethoxysilane. The hydrolysis and polycondensation of the precursor R-2 produced the corresponding xerogel. Both precursor and xerogel were analysed by NMR, FTIR, UV, CD spectra, fluorescent spectroscopy, polarimetry and elemental analysis. The precursor and xerogel can emit strong blue fluorescence and are expected to have a potential application in the separation of chiral molecules as fluorescent sensor. The precursor exhibits strong Cotton effect in its circular dichroism (CD) spectrum indicating a highly rigid structure.     

Photophysical properties of octupolar chromophore based on triazine core and fluorene divinylene conjugated bridge

A novel octupolar chromophore with 1,3,5-triazine as core,2,7-divinylene-9,9-dimethylfluorene as extendedπ-conjugated bridge,triarylamine as the electron-donating end-groups was successfully synthesized and characterized.Their linear photophysical and two-photon absorption(TPA) properties were investigated by UV absorption,excited fluorescence(SPEF) spectra and nonlinear transmission method,respectively.The absorption cut-off of the chromophore is below 520 nm and it has stronger fluorescence emission in a nonpolar solvent.In addition,the chromophore exhibits larger TPA cross-section(226.0 GM) in the femtosecond regime at 800 nm.     

Thermally Stable and Organo-soluble Polyamides Containing Triazine Rings and Ether Linkages in the Main Chain: Synthesis and Characterization

In order to synthesize new polyamide(PA) 5 and copolyamides(Co PA) 7a-7d, a new-type of dicarboxylic acid containing triazine ring was successfully synthesized from 2,4-dichloro-6-methoxy-s-triazine 1 and 4-aminobenzoic acid. New polyamide 5 containing triazine moiety was prepared from 4,4'-(6-methoxy-1,3,5-triazine-2,4-diyl)bis(azanediyl)dibenzoic acid 3 and 4,4′-diaminodiphenylether by direct polycondensation reaction. Then new series thermally stable copolyamides 7a-7d with high solubility in common organic solvents were synthesized from the direct polycondensation reaction of diacid 3 as a first monomer, aliphatic-aromatic diacids 6a-6d as second diacids and 4,4′-diaminodiphenylether. All of the above polymers were fully characterized by 1H-NMR and FTIR spectroscopy, elemental analysis(CHN), inherent viscosity, solubility tests, gel permeation chromatography(GPC), differential scanning calorimetry(DSC) and thermogravimetric analysis(TGA). The resulted Co PAs 7a-7d have shown good inherent viscosities, solubility and thermal properties.     

Catalyzed oxidation of 2,6-dimethylphenol in Triton X- 100 micellar solution

The oxidative coupling reaction of 2,6-dimethylphenol with H2O2 catalyzed by a copper(Ⅱ) Schiff complex in aqueous and Triton X-100 micellar solution under mild conditions was investigated. The kinetics of formation of 3,3′,5,5′-tetramethyl-4,4′-diphenoquinone (DPQ) was studied. Rate constant k2 were obtained. The optimum pH for DPQ generation reaction is 7.25. The main product was DPQ in aqueous buffer solution, but PPE and the oxidized products of PPE remained in Triton X-100 micellar solution.     

Conductivity enhancement of PEDOT:PSS film via sulfonic acid modification: application as transparent electrode for ITO-free polymer solar cells

3-Hydroxy-1-propanesulfonic acid(HPSA)was applied as a modification layer on poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)film via spin-coating,resulting in a massive boost of the conductivity of PEDOT:PSS film,and thus the as-formed PEDOT:PSS/HPSA bilayer film was successfully used as a transparent electrode for ITO-free polymer solar cells(PSCs).Under the optimized concentration of HPSA(0.2 mol L~(-1)),the PEDOT:PSS/HPSA bilayer film has a conductivity of 1020 S cm~(-1),which is improved by about 1400 times of the pristine PEDOT:PSS film(0.7 S cm~(-1)).The sheet resistance of the PEDOT:PSS/HPSA bilayer film was 98Ωsq~(-1),and its transparency in the visible range was over 80%.Both parameters are comparable to those of ITO,enabling its suitability as the transparent electrode.According to atomic force microscopy(AFM),UV-Vis and Raman spectroscopic measurements,the conductivity enhancement was resulted from the removal of PSS moiety by methanol solvent and HPSA-induced segregation of insulating PSS chains along with the conformation transition of the conductive PEDOT chains within PEDOT:PSS.Upon applying PEDOT:PSS/HPSA bilayer film as the transparent electrode substituting ITO,the ITO-free polymer solar cells(PSCs)based on poly[N-9″-hepta-decanyl-2,7-carbazole-alt-5,5-(4′,7′-di-2-thienyl-2′,1′,3′-benzothiadiazole)]:[6,6]-phenyl C71-butyric acid methyl ester(PC_(71)BM)(PCDTBT:PC_(71)BM)active layer exhibited a power conversion efficiency(PCE)of 5.52%,which is comparable to that of the traditional ITO-based devices.     

SYNTHESIS AND CHARACTERIZATION OF ORGANO-SOLUBLE FLUORINATED POLYIMIDES FROM 4,4′-BIS(3-AMINO-5-TRIFLUOROMETHYLPHENOXY)-BIPHENYL AND VARIOUS AROMATIC DIANHYDRIDES

An aromatic diamine monomer, 4,4′-bis(3-amino-5-trifluoromethyl phenoxy)-biphenyl (TFBPDA), was synthesized via the nucleophilic displacement reaction of 3,5-dinitrobenzotrifluoride and 4,4′-biphenol. The monomer was reacted with various aromatic dianhydrides via the high temperature polycondensation procedure to provide a series of polyimides. The polyimides, PI-1 to PI-4, show good solubility not only in aprotic solvents, such as N-methyl-2-pyrrolidinone and N,N-dimethylacetamide, but also in many common solvents, such as m-cresol, chloroform and cyclopentanone. PI-4, derived from 4,4′-(hexafluoroisopropylidene)diphthalic anhydride and TFBPDA, was even soluble in toluene. Moreover, PI films exhibit good thermal stability, outstanding transparency in the visible light region and acceptable mechanical and electrical properties. The excellent combined properties of the polyimides make them as a good candidate for fabricating microelectronics.     

4,4’,6,6’-四叠氮基偶氮-1,3,5-三嗪(TAAT)的合成、表征与热分解研究

以4,4',6,6'-四叠氮基联氨-1,3,5-三嗪(TAHT)为原料,经三氯异氰尿酸(TCI)、二氯异氰尿酸(DCI)、二氯异氰尿酸钠(SDCI)、二溴异氰尿酸钠(SDBI)、N-氯代丁二酰亚胺(NCS)、N-溴代丁二酰亚胺(NBS)、氯气(Cl2)、液溴(Br2)、次氯酸钠(NaClO)等氧化联氨键形成偶氮键合成了4,4’,6,6’-四叠氮基偶氮-1,3,5-三嗪(TAAT),产率72％～93％.通过FT-IR,13C NMR,MS,元素分析等手段对其进行了表征;考察了不同氧化剂对氧化联氨键形成偶氮键反应的影响,验证了TAHT氧化合成TAAT的机理.通过DSC、程序升温FT-IR等测试结果,提出了TAAT的热分解机理.     

Near-Infrared Hydrophobic Probes as Molecular Light Switch for CMC Determination of Triton X-100 Solution

The fluorescence behavior of two near-infrared (NIR) chromophores with linear alkyl chains of different lengths, 2-[4′chloro-7′(3″ethyl-2″benzothiaolinylidene)-3′,5′-(1″′3′″-propanediyl)-1′3′,5′-heptantriene-1′-yL]-3-ethylbenzothiazolium iodide (Probe Ⅰ) and 2-[4′chloro-7′(3″hexadecyl-2″benzothiazolinylidene)-3′,5′-(1′″,3′″-propanediyl)-1′,3′,5′-heptantriene-1′-yl]-3-ethylbenzothiazolium iodide (Probe Ⅱ), in aqueous solution containing different concentrations of surfactants was studied. The fluorescence of the probe with a short chain (probe Ⅰ) was completely quenched in water and aqueous solution containing a low concentration (below the critical micelle concentration,CMC) of surfactant Triton X-100. However, the fluorescence reappeared and reached maximum rapidly once the concentration of the surfactant approached the CMC. The probe with a long chain (probe II) displayed a similar fluorescence behavior but more dramatically fluorescent recovery in Triton X-100 system, which gave a direct in- dication for the micelle forming process and provided a simple method for the determination of the critical micelle concentration of the surfactant. The CMC values determined by this method were in good agreement with those obtained by other techniques. The fluorescence behavior of the two probes in other surfactant systems was also investigated.     

A cyanostilbene-based molecule with aggregation-induced emission properties: amplified spontaneous emission,protonation effect and electroluminescence

A terpyridine-substituted cyanostilbene derivative(Z)-2-(4′-([2,2′:6′,2″-terpyridin]-4′-yl)-[1,1′-biphenyl]-4-yl)-3-phenylacrylonitrile(CNSTPy) was synthesized and characterized. The compound exhibits remarkable aggregation-induced emission phenomenon and its single crystal shows a blue emission with fluorescent efficiency as high as 45%. Based on its aggregation state behavior, multiple applications towards exploring its lasing, fluorescence switching and electroluminescence properties were realized. Amplified spontaneous emission(ASE) was observed from the crystal and verified by the variable pump strip method, with a threshold value of ～1.5 m J cm~(-2). The protonation/deprotonation processes accompanied by the formation of different molecular aggregation structure result in the distinct blue and yellow emissions. Additionally, the molecule also shows a moderate electroluminescence performance.     

Asymmetric Synthesis of (S)-Dimethyl-4,4′-dimethoxy-5,6,5′,6′-dimethenedioxybiphenyl-2,2′-dicarboxylate

Schizandra chinesis(wuweizi)has long been used in Chinese herbal medicine.Schisandrin C,as a constituent of Schizandra chinesis,shows various pharmacologicalactivities1.The similar compound,dimethyl-4,4′-dimethoxy-5,6,5′,6′-dimethenedi-oxy-biphenyl-2,2′-dicarboxylate(α-DDB),discovered by Xie2,3et al.in the investing-ation of schisandrin C,and some derivatives have also exhibited anti-HIV and anti-HBVactivity4.Further study of this kind of biphenyls has attracted considerable attenti…     

Synthesis and properties of tribranched chromophores with triazine and fluorene units

Two tribranched chromophores,1,3,5-triazine as electron deficient core,9,9-dimethylfluorene asπ-conjugated bridge, diphenylamino(4a) and naphthylamino(4b) as electron-donating end-groups,were successfully prepared via Buchwald-Hartwig coupling reaction.Their linear photophysical and two-photon absorption(TPA) properties were investigated by absorption, fluorescence and nonlinear transmission method,respectively.The absorption cut-offs of the chromophores are below 550 nm and both chromophores have strong fluorescence emission.The compound 4a(206.3 GM) exhibits larger TPA cross-section than 4b (57.8 GM) in the femtosecond regime at 800 nm.     

消旋的有机二磺酸三邻菲咯啉锌配合物(英)

Compound [Zn(phen)₃][BDA] (1) (BDA=6,6′-dibromo-2,2′-dimethoxy-1,1′-binaphthylene-4,4′-disulfonate, phen= 1,10-phenanthroline) composes of the anion part (racemic-(R,S)-6,6′-dibromo-2,2′-dimethoxy-1,1′-binaphthylene-4,4′-disulfonate ) and the cation part which consists of a racemic octahedrally coordinated zinc center defined six nitrogen atoms from three phen rings to form an inorganic chirality that can be resolution by chiral organic ligand, the 3D framework was formed through the strong H-bonding interaction between sulfonate and water. CCDC: 277924.     

CROSS-LINKING OF AROMATIC POLY（THIOETHER）S

A novel cross-linking process using two high molecular weight aromatic poly(thioether)s,which were synthesized by the reactions of 4,4′-thiobisbenzenethiol with 4,4′-difluorobenzophenone and 4,4′-difluorodiphenylsulfone,respectively, and commercially available lower molecular weight poly(p-phenylene sulfide)was investigated.These reactions were carried out in bulk by the addition of silver tetrafluroborate andα,α′-dibromo-p-xylene at 190℃over a period of 45 min. Furthermore,the same procedure could be modified to cross-link compression-molded films of these three polymers.The thermal and solubility behaviors of these polymers before and after cross-linking reactions,are presented.     

THE AROMATIC AND HETEROCYCLIC DINITRILES AND THEIR POLYMERS. Ⅸ. THE POLYMERIZATION KINETICS OF 4, 4''-BIPHENYLDICARBONITRILE*

The polymerization kinetics of 4,4'-biphenyldicarbonitrile catalyzed by complex of 4,4'-biphenyl-dicarbonitrile with ZnCl_2 was studied. The cyano group concentration was measured by infrared spectroscopic analysis using potassium ferricyanide as the internal reference. The results proved that the polymerization is a second order reaction, and the activation energy of polymerization is 12.4 kcal/mol. The polymerization rates of 4,4'-biphenyldicarbonitrile catalyzed by other seven complexes were also measured. The polymerization mechanism was discussed.     

A Novel Three-dimensional Ni Coordination Polymer Based on Flexible Di-carboxylate Ligand and 4,4-Pyridine： Synthesis, Characterization and Topological Analysis

A novel Ni(II) coordination polymer [Ni(dtba)(4,4′-bpy)] (1, H2dtba = 2,2′-dithio- bisbenzoic acid, 4,4′-bpy = 4,4′-bipyridine) has been synthesized by H2dtba and Ni(CH3COO)2·4H2O with exo-bidentate rigid ligand 4,4′-bpy by using hydrothermal method, and its structure was determined by single-crystal X-ray diffraction. X-ray crystal structure analysis reveals that complex 1 crystallizes in monoclinic, space group Cc with a = 11.7624(9), b = 18.7933(19), c = 10.3071(11), β = 97.6510(10)°, V = 2258.2(4)3, Z = 4, C24H16N2NiO4S2, Mr = 519.22, Dc = 1.527 g/cm3, μ = 1.079 mm-1 and F(000) = 1064. The structure was solved by direct methods and refined to R = 0.0434 and wR = 0.1000 for 3281 observed reflections (I > 2σ(I)). The coordination environment of Ni(II) is a distorted octahedron, and a three-dimensional structure was formed with the coordination effect of dtba2- and 4,4′-bpy ligands. The topological analysis reveals that the whole framework of 1 is a 2-nodal net of (52.6)(53.64.72.8) topology. The thermal stability and XRD pattern of 1 were also investigated.     

Zinc-coordination Polymers Based on a Donor-acceptor Mix-ligand System: Syntheses,Crystal Structures and Photophysical Properties

By employing an electron-rich tricarboxytriphenyl amine as donor ligand and electron-deficient 2,4,6-tris(pyridin-4-yl)-1,3,5-triazine as acceptor ligand to assemble with Zn2+ions,three new coordination polymers were successfully synthesized and characterized systematically.Three compounds with different structures were obtained by regulating the reaction solvent,and the effect of the reaction solvent on the synthesis of crystals was explored.Furthermore,the photophysical properties of the compounds were investigated.     

DFT Study on the Effect of Hydrogen-bond Formation on the Adsorption of Aminotriazines on Graphene

DFT calculations have been performed to explore the aminotriazine adsorption on graphene surfaces.Relative energies,equilibrium geometries and electronic structures of monomer and dimer of aminotriazine molecules adsorbed at the surface were investigated and analyzed in details.It was found that the hydrogen atoms in the NH2 group of aminotriazine molecules are directed toward the graphene surface,and the adsorption energy increases as the NH2 group is added.The adsorbed aminotriazine molecules facilely form a dimer through the hydrogen bonding interactions,and the two aromatic rings of optimized structure of 2-amino-1,3,5-triazine(B) dimmer(denoted by B2) and melamine(D) dimmer(denoted by D2) are parallel to the graphene sheet.The large deviation of the averaged adsorption energy of B2 and D2 compared to monor adsorption may reflect the increase of π-π repulsion and the effect of hydrogen bond formation.The electronic structure analyses reveal that the formation of hydrogen bonds in melamine dimer has great influence on the adsorption mode at the graphene surface.