Static and vibrational creep of a fabric-reinforced plastic in shear in the plane of the reinforcement

The results of a comparative experimental investigation of the short-term static and vibrational creep of a fabric-reinforced plastic in shear in the plane of the reinforcement are presented. The experimental procedure is described in detail. It is shown that on the investigated ranges of temperature, stress, and amplitude-frequency parameters the effect of an additional vibrational load on the creep process is unimportant.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 4, pp. 605–610, July–August, 1971.     

Computer approximation of families of curves of physically nonlinear creep of polymer materials

The determination of confidence intervals of deformations was studied for an individual measurement and arithmetical mean common for all points of an experimental family of curves. From the experimental data on the creep of polyamide resin and five different analytical equations of physically nonlinear creep, the problems of the computer approximation of families of creep curves and the determination of the material parameters are discussed. A method is proposed for a quantitative evaluation of the degree of correspondence of the initial data to the similarity of isochronous creep curves and the similarity of the creep curves.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 2, pp. 220–229, March–April, 1976.     

Creep of polyester resin PN-3 under moisture-absorption conditions

A procedure is described for testing samples for creep in a climatic chamber of the Feutron 3001 type. Results of an experimental study of forward and back creep of polyester resin PN-3 under simultaneous moistening of samples in an air medium with elevated humidity are discussed. It is shown that the rate of the creep process depends greatly on the humidity state of the material.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 4, pp. 579–584, July–August, 1972.     

Creep of polyethylene terephthalate with variable stresses under conditions of uniaxial extension

The results from experimental and theoretical investigation of the creep of polyethylene terephthalate film during stepwise varying stresses under conditions of uniaxial extension are given.Izhevsk Mechanical Institute. Translated from Mekhanika Polimerov, No. 5, pp. 929–933, September–October, 1972.     

Applicability of influence functions determined from quasi-static experiments for solving dynamic problems of vibration protection

Creep of shock-absorbing foamed materials and a vibration-protecting structure is investigated. The parameters of the influence functions, whose numerical realization is conducted in solving the dynamic problem of vibration protection, are determined from the creep curves by the method of logarithmic matches. The conclusions agree with the experimental.Moscow Institute of Electronic Machinery. Translated from Mekhanika Polimerov, No. 3, pp. 537–540, May–June, 1975.     

Prediction of the creep of polyester resin in the presence of randomly acting temperature and humidity factors

The possibility of using the theory of random processes to predict the temperature and moisture creep of polymeric materials in the presence of randomly acting temperature and humidity factors is considered. A procedure for estimating the long-term deformation under such conditions is described with reference to the uniaxial creep of PN-3 polyester resin using time—temperature and time—moisture superposition. The possible correlation of the ambient temperature and humidity is taken into account. The results of a computer calculation show that the theoretical and experimental data are in satisfactory agreement.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 2, pp. 219–226, March–April, 1973.     

Bulk deformation during linear extension of certain solid polymers

This article describes an experimental study of the bulk deformation in a forward-and-reverse creep cycle of low-density polyethylene and plasticized acetyl celluloses under stresses beyond the linearity region of the viscoelastic properties.All-Union Scientific-Research Institute of Synthetic Resins, Vladimir. Translated from Mekhanika Polimerov, No. 2, pp. 352–354, March–April, 1974.     

Vibrational creep of polymeric materials

An experimental study of the effect of vibration on the creep process has been carried out in the case of the rigid porous polyurethane PPU-3, as a function of the magnitude of the vibrational loading and the level of basic static stresses. It has been shown that with increase in the velocity amplitude of the dynamic stresses, the creep process is accelerated, without being accompanied thereupon by vibrational heating of the material. The possibility has been established of approximating vibrational creep curves by the integral equation of Volterra, using a discrete series of relaxation times transformed by the vibro-time analogy method.For Communication No. 3, see [1].Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 2, pp. 223–232, March–April, 1970.     

Creep and length of life of polycarbonate in aggressive media

Experimental data regarding creep of polycarbonate in air, water, and 10% citric acid are presented. It is shown that there is a correlation between the rate of creep and the length of life of polycarbonate, which enables its long term strength to be predicted.Food Industry Technological Institute, Moscow. D. I. Medeleev Institute of Chemical Technology, Moscow. Translated from Mekhanika Polimerov, No. 4, pp. 725–727, July–August, 1972.     

Region of linearity of the deformation properties of contact-molded glass-reinforced plastic

A study was made of the creep and recovery of contact-molded glass-reinforced plastic in different directions in the plane of the sheet in uniaxial tension. On the basis of experimental data, the region of linearity of the deformation properties of the material under investigation was established. The influence functions in the relations of the theory of viscoelasticity were taken in the form proposed by Bronskii. The dependence of the parameters which determine these functions on direction was investigated. It is shown that, in practice, this dependence is inherent in only one of the parameters, and a relationship which is in satisfactory agreement with the experimental results is proposed to describe it.Moscow Institute of Chemical Machine Building. Scientific-Research Institute for Mechanics, M. V. Lomonosov State University, Moscow. Translated from Mekhanika Polimerov, No. 3, pp. 404–410, May–June, 1970.     

Comparison of the effect of ultraviolet radiation on polymer creep rate in a vacuum and in air

The effect of ultraviolet radiation on the creep rates of various polymers has been investigated in a vacuum and in air. It is shown that the ambient medium plays very little part in the processes leading to an increase in creep rate in the presence of ultraviolet radiation.Ioffe Physico-Technical Institute, Academy of Sciences of the USSR, Leningrad. Translated from Mekhanika Polimerov, No. 3, pp. 559–561, May–June, 1969.     

A rheological model of polymers and glass-reinforced plastics

Network polymers and the corresponding glass-reinforced plastics are investigated for a homogeneous uniaxial state of stress and constant temperature. A physical law relating the high-elastic strain and the stress in explicit form with once-determined structural constants is obtained for the damped (bounded) creep regime. The theoretical solutions are compared with the experimental data for a glass-reinforced plastic based on unsaturated polyester resin and glass mat reinforcement.Institute of Engineering Mechanics, Bulgarian Academy of Sciences, Sofia. Translated from Mekhanika Polimerov, No. 5, pp. 851–857, September–October, 1971.     

Evaluation of integral operators of viscoelasticity

A method of calculating the integral operators of viscoelasticity from arbitrary continuous functions is proposed for the case where the relaxation (creep) function is given in tabulated or graphic form. The problem of constructing the creep function from an experimentally known relaxation function is solved.Moscow Institute of Electronic Machine Building. Translated from Mekhanika Polimerov, No. 6, pp. 1115–1117, November–December, 1973.     

Hereditary theory of creep and low-cycle fatigue of polymeric materials

The results of an investigation of the creep of polymethyl methacrylate under alternating loading and recovery are presented. The experiments ended in the failure of the specimen. The creep data obtained are described on the basis of the nonlinear Boltzmann-Persoz theory and Bryzgalin's theory of hereditary recovery. Korabel'nikov's result, according to which for alternating loading and recovery the total time under load up to failure is less than the static life of the polymer, is confirmed.Institute of Problems of Mechanics, Academy of Sciences of the USSR, Moscow; Scientific-Research Institute of Mechanics, Lomonosov Moscow State University. Translated from Mekhanika Polimerov, No. 4, pp. 615–621, July–August, 1970.     

Creep of linear unoriented polymers in tension,compression, and torsion

The creep of polymethyl methacrylate, polystyrene, and polyethylene in tension, compression, and torsion has been investigated over a broad interval of temperature below the glass transition point. It is shown that the creep criterion changes depending on the temperature. This is associated with changes in molecular mobility.A. F. Ioffe Physicotechnical Institute, Academy of Sciences of the USSR, Leningrad. Translated from Mekhanika Polimerov, No. 1, pp. 24–28, January–February, 1970.     

Viscoelastic characteristics of the interaction between structures and soils

The shear coefficients of a body relative to the soil and the shear creep and relaxation kernels are determined from the data of creep and relaxation tests.Urazbaev Institute of Mechanics and Earthquake Resistance of Structures, Academy of Sciences of the SSR, Tashkent. Translated from Mekhanika Polimerov, No. 2, pp. 207–211, March–April, 1973.     

Some relationships between the specific functions and constants of visoelastic media

It is proved that the shear, lateral creep, and relaxation functions can be expressed in an elementary way by the longitudinal creep and relaxation functions and the elasticity modulus of the bulk.I. M. Gubkin Moscow Institute of Petrochemical and Gas Industry. Translated from Mekhanika Polimerov, No. 5, pp. 810–814, September–October, 1973.     

Investigation of the integral creep equations (cubic nonlinearity) for different loading paths

Expressions for the creep strain obtained in accordance with the Leaderman-Rozovskii theory and in the form of a multiple-integral Volterra series are compared for different loading paths. The influence functions are assumed to be symmetrical. The strain intensity-time curves are calculated for a complex loading path for which the stress intensity is constant. It is found that these curves are nonmonotonic for both linear and nonlinear creep.Read at Fourth Symposium on Rheology, Moscow, May 27–30, 1969.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 1, pp. 35–42, January–February, 1970.     

Deformability of thermoplastics in physiological salt solution

Conclusions 1. The creep of thermoplastics in physiological salt solution is characterized by change in the rate of creep deformation relative to the creep in air. The bending creep deformations of HMWPE and phenylone and the compressive creep deformation of HMWPE are described by a binomial equation [Eq. (5)] and the compressive creep deformation of phenylone is described by Eq. (6).2. The lifetime of the thermoplastics studied under static compression and bending determined relative to limiting deformations is described by Eq. (7). Under the same stresses and limiting deformations, the lifetime of phenylone in physiological salt solution is greater than the lifetime of HMWPE.3. After the simultaneous action of physiological salt solution and static stress over one month, most of the characteristics of short-term strength in phenylone are significantly reduced due to swelling in the model medium.Paper presented at the Third All-Union Conference on Polymer Mechanics, Riga, 1976.N. N. Priorov Central Scientific-Research Institute of Traumatology and Orthopedics, Moscow. Kazan Construction Engineering Institute. Translated from Mekhanika Polimerov, No. 2, pp. 325–331, March–April, 1978.     

Determination of regular discrete relaxation spectra from the viscoelastic functions

A procedure for determining regular discrete relaxation spectra from the viscoelastic functions is presented as a generalization of a previously proposed procedure for determining the conditional rheological characteristics in a piecewise-exponential approximation of the experimental creep, relaxation, and – curves. The calculated data are in good agreement with the experimental results.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 5, pp. 801–807, September–October, 1971.