Synthesis and properties of mono-O-[(N-(aminoalkyl)aminocarbonyl)-methoxy]thiacalix[4]arenes and novel mono-O-bridged bisthiacalix[4]arene

A simple method for thiacalix[4]arene O-monoamide preparation with high yields using 5,11,17,23-tetra-tert-butyl-28-(ethoxycarbonyl)methoxy-2,8,14,20-tetrathiacalix[4]arene reaction with diaminoalkanes is reported. The solid state cyclization reaction of the acylethylenediamines function of 5,11,17,23-tetra-tert-butyl-28-O-[(N-(2-aminoethyl)aminocarbonyl)-methoxy]thiacalix[4]arene leading to the formation of the 5,11,17,23-tetra-tert-butyl-28-[2-methoxy-imdazoline]thiacalix[4]arene compound is described for the first time for the calixarene macrocycle family. Finally, preliminary results show that O-mono-amide-thiacalixarene derivatives are promising candidates for the production of self-assembled materials and efficient precursors for the synthesis of bisthiacalix[4] arenes.     

F-Induced ‘turn-on’ fluorescent chemosensor based on 1,3-alt thiacalix[4]arene

A new thiacalix[4]arene based fluorescent sensor 1 bearing two naphthyl groups has been synthesized in 1,3-alternate conformation. In the absence of fluoride ion, the receptor 1 is in ‘off-state’ showing no fluorescence emission. The presence of fluoride ion triggered the fluorescence emission to ‘on-state’. The receptor shows pronounced selectivity for fluoride ions. In THF, the presence of F⁻ ions induces the formation of a 1:1 (G:H) complex.     

含苯并噻唑基的硫桥杯芳烃衍生物的合成及结构

在碳酸钾存在下, 对叔丁基硫桥杯芳烃(1)分别与端基二溴代烷和碘甲烷反应, 生成硫桥杯芳烃衍生物2 和3, 它们分别与过量的2-巯基苯并噻唑在碳酸钾存在下反应, 生成含苯并噻唑基的硫桥杯芳烃衍生物5a～5d. 通过 1H NMR, 13C NMR, IR, MS和元素分析等手段对产物进行了表征. 同时, 采用X射线衍射分析确定了硫桥杯芳烃5b的晶体结构.     

Preparation, Crystal Structure and Thermal Decomposition Character of [Ni(CHZ)3]SO4·3H2O

A new coordination compound [Ni(CHZ)₃]SO₄·3H₂O (CHZ=carbohydrazide) was synthesized and characterized by elemental analysis and fourier transform infrared (FTIR) spectra, and its crystal structure was determined by X-ray single crystal diffraction. The crystal belonged to the triclinic system, space group with a=0.85237(1) nm, b=0.90964(1) nm, c=1.22559(2) nm, β=96.731(2)°, V=0.8849(2) nm³, Z=2, D_c=1.798 g·cm⁻³. In the asymmetric unit, three carbohydrazide (CHZ) bidentate ligands were coordinated with a Ni(II) cation by carbonyl O atoms and terminal N atoms of the hydrazine groups to form three planar chelate rings which were vertical to one another. Ni(II) cations, CHZ ligand molecules, sulfate anions, and lattice water molecules were jointed to a complicated three-dimensional network structure through coordination bonds, electrostatic forces and extensive hydrogen bonds. Natural bond orbital (NBO) atomic charges of CHZ were obtained from the density functional theory (DFT) method at the B3LYP/6-311+G^** level to interpret the reason why the coordination sites in carbohydrazide molecule were the oxygen atom of the carbonyl group and terminal N atoms of the hydrazine group. The thermal decomposition mechanism was tested through differential scanning calorimetry (DSC), thermogravimetric analyses, and Fourier transform infrared spectra. The kinetic parameters of the two exothermic processes of the title compound were studied applying the Kissinger's and Ozawa-Doyle's methods. The results indicated that the title complex possessed high energy and good thermal stability.     

A new colorimetric and fluorescent chemosensor based on thiacalix[4]arene for fluoride ions

A new thiacalix[4]arene based fluorescent chemosensor thiacalix[4]arene-N-(quinolin-8-yl)acetamide (TCAN8QA) has been synthesized. TCAN8QA has been found to exhibit highly selective behavior for F⁻ ions among all other anions, that is, Cl⁻, Br⁻, I⁻, PO₄⁻³, OH⁻, H₂PO₄⁻, and CH₃COO⁻ in the absorption spectra as well as in the emission spectra. Red shift and quenching in emission spectra constituting the signature for fluoride detection are due to photoinduced charge transfer (PCT) which can be attributed to deprotonation of acidic NH proton in the presence of fluoride ions.     

Chromatographic molecular recognition for catechol-related compounds using thiacalix[4]arene as an effective selector

Thiacalix[4]arene (5,11,17,23-tetra-tert-butyl-25,26,27,28-tetrahydroxy-2,8,14,20-tetrathiacalix[4]arene) is an amphiphilic molecule comprising four p-tert-butylphenol-like groups ortho-linked by single sulfur atoms. This molecule has a high electron density area owing to the close proximity of the hydroxyl groups and sulfur atoms. We studied the applicability of this interesting compound as a selector for high-performance liquid chromatography (HPLC) thereby presumably exploiting this feature. Firstly, uniformly sized polymer particles were prepared by using a multi-step swelling and polymerization method with ethylene glycol dimethacrylate (EDMA) as a cross-linker. Methacrylic acid (MAA) was introduced onto the surface of the resulting polymer particles through a new modification method. Thiacalix[4]arene was chemically bonded through the MAA group by using 1,4-dibromobutane as a spacer to reduce steric hindrance around the MAA and the polymer particle itself. The performance of the prepared polymer-based thiacalix[4]arene-modified stationary phase was evaluated with HPLC. Specific chromatographic retention behavior was observed for catechol relative to positional isomers of xylene, cresol, and benzene-diol. Catecholamine and catechol showed specific chromatographic retention behavior.     

硫杂杯[4]芳烃氧化膦衍生物的合成与晶体结构

合成了部分取代的硫杂杯[4]芳烃氧化膦衍生物, 二(亚甲基二苯基氧化膦)对叔丁基硫杂杯[4]芳烃(化合物1), 培养了化合物的单晶, 用Smart 1000 CCD衍射仪测定了其晶体结构. 结果表明, 1的组成为: C₆₆H₇₀O₆P₂S₄•2CH₃OH, 属三斜晶系, P1空间群, 晶胞参数a＝1.3453(6) nm, b＝1.5289(7) nm, c＝1.7893(9) nm; α＝75.707(9)°, β＝69.131(8)°, γ＝79.734(9)°, Z＝2; V＝3.316(3) nm³, d＝1.215 g/cm³, F(000)＝1288, μ (Mo Kα)＝0.244 mm^－1, R₁＝0.0625, wR₂＝0.1372. 杯芳烃分子采取了锥式构象.     

Novel Conductive PANI/Hydrophilic Thiacalix[4]areneNanocomposites: Synthesis,Characterization andInvestigation of Properties简

Nanocomposites of polyaniline(PANI) and the macrocycle thiacalix[4]arene tetra sulfonate(TCAS) were successfully synthesized in feed ratios of 1:0.25, 1:0.50 and 1:0.75 by three prevail synthetic methods, i.e. in situ polymerization, emulsion polymerization and solution casting technique. The structures of the nanocomposites were confirmed by FTIR, UV-Vis, XRD, SEM, and TEM techniques. The conductivity was measured by a four probe method. The conductivity was recorded to be as high as 105 × 10 2S cm 1for the nanocomposite with a nanometer size structure and homogeneously distributed morphology. The electroactivity of the nanocomposites was approved by cyclic voltammetry(CV) and impedance spectroscopy technique(EIS). The antioxidant ability and thermal property of the composites were further studied. Preliminary studies have evidenced the production of conductive nanocomposites with good thermal property and relatively good solubility in N-methyl 2-pyrrolidone(NMP), with the antioxidant activity reaching up to 80%.     

Structure elucidation of phenoxathiin-based thiacalix[4]arene conformations using NOE and RDC data

Phenoxathiin-based thiacalix[4]arene, obtained by the acid-catalysed rearrangement of the corresponding spirodienone derivative, was immobilized using the alkylation with chloroacetonitrile to yield three (out of four theoretically possible) stereoisomers. As the conformational outcome of the reaction could not be unambiguously assigned using standard NMR techniques, the method of Residual Dipolar Coupling constants (RDCs) was applied. The measuring of an anisotropic through-space dipole-dipole interactions in the lyotropic liquid crystalline alignment medium (PELG, poly-γ-ethyl-l-glutamate, and PBLG, poly-γ-benzyl-l-glutamate) enabled the assignment of the individual conformers. The usefulness of this approach was finally confirmed by the X-ray crystallography data.     

Click synthesis and dye extraction properties of novel thiacalix[4]arene derivatives with triazolyl and hydrogen bonding groups

Using a click reaction between alkynylthiacalix[4]arene and ethyl 2-azidoacetate followed by an ammonolysis with ethanolamine,leucinol and hydrazine hydrate,respectively,three novel thiacalix [4]arene derivatives 4,5 and 6 with triazolyl and hydrogen bonding groups(NH and OH) were synthesized in high yields.They exhibited excellent extraction capability for six anionic and cationic dyes.The flexible cavity,π-triazole rings and hydrogen bonding groups all play crucial roles in dye complexation.     

Jahn-Teller-distorted dimeric anions in (cat)[Mn2F8(H2O)2]·2H2O (cat = pipzH2, dabcoH2) and (dabcoH2)2[Mn2F8(H2PO4)2]

Using biprotonated dabco (1,4-diazabicyclo[2.2.2]octane) or pipz (piperazine) as counter cations, mixed-ligand fluoromanganates(III) with dimeric anions could be prepared from hydrofluoric acid solutions. The crystal structures were determined by X-ray diffraction on single crystals: dabcoH₂[Mn₂F₈(H₂O)₂]·2H₂O (1), space group P2₁, Z = 2, a = 6.944(1), b = 14.689(3), c = 7.307(1) Å, β = 93.75(3)°, R₁ = 0.0240; pipzH₂[Mn₂F₈(H₂O)₂]·2H₂O (2), space group , Z = 2, a = 6.977(1), b = 8.760(2), c = 12.584(3) Å, α = 83.79(3), β = 74.25(3), γ = 71.20(3)°, R₁ = 0.0451; (dabcoH₂)₂[Mn₂F₈(H₂PO₄)₂] (3), space group P2₁/n, Z = 4, a = 9.3447(4), b = 12.5208(4), c = 9.7591(6) Å, β = 94.392(8)°, R₁ = 0.0280. All three compounds show dimeric anions formed by [MnF₅O] octahedra (O from oxo ligands) sharing a common edge, with strongly asymmetric double fluorine bridges. In contrast to analogous dimeric anions of Al or Fe(III), the oxo ligands (H₂O (1,2) or phosphate (3)) are in equatorial trans-positions within the bridging plane. The strong pseudo-Jahn-Teller effect of octahedral Mn(III) complexes is documented in a huge elongation of an octahedral axis, namely that including the long bridging Mn-F bond and the Mn-O bond. In spite of different charge of the anion in the fluoride phosphate, the octahedral geometry is almost the same as in the aqua-fluoro compounds. The strong distortion is reflected also in the ligand field spectra.     

A novel ferrocene-based thiacalix[4]arene ditopic receptor for electrochemical sensing of europium(III) and dihydrogen phosphate ions

We have synthesized a ferrocene-based 1,3-alternate thiacalix[4]arene ditopic receptor 3 that contains four identical polyether arms terminated with the ferrocene amide moieties. Our studies have revealed that this redox-active receptor can be used as an electrochemical sensor to recognize both europium (Eu³⁺) and dihydrogen phosphate ions with a high selectivity.     

配合物[Cu(CAM)(H2O)2]的水热合成与结构表征

A copper(II) complex [Cu(CAM)(H₂O)₂], (CAM=4-hydroxypyridine-2,6-dicarboxylic acid), has been hydr-othermally synthesized and characterized by elemental analysis, IR, and X-ray diffraction single crystal structure analysis. It belongs to triclinic system, with space group P1, a=0.783 3(3) nm, b=0.796 5(3) nm, c=0.798 6(3) nm, α=100.340(6)°, β=93.768(6)°, γ=109.348(5)°, V=0.458 3(3) nm³, Z=2. The copper(II) ion is 5-coordinated and exhi bits a distorted square pyramidal coordination environment. The two coordinated aqueous molecules and the oxygen atoms from the ligand generate the intermolecular hydrogen bonds, which result in the 2D supramolecular network. CCDC: 227156.     

Dimeric water embedded within a hydrophobic cavity of tetra-(p-tert-butyl)thiacalix[4]arene

X-ray crystallographic analysis and density functional B3LYP/6-31G(d) calculation confirm that dimeric water is embedded within a hydrophobic cavity of tetra-(p-tert-butyl)thiacalix[4]arene and stabilized by hydrogen bondings of aromatic π?H₂O(1) and methyl?H₂O(2) in the dimeric water inclusion complex with binding energies of 1.4 and 0.9 kcal mol⁻¹ respectively, and by hydrogen bonding formed between H₂O(2) and four phenolic OH groups from an adjacent tetra-(p-tert-butyl)thiacalix[4]arene, with binding energy of 3.8-4.2 kcal mol⁻¹.     

Structural characterisation of [Pt(NH3)4]2[W(CN)8][NO3]·2H2O donor–acceptor complex

The bimetallic [Pt(NH₃)₄]₂[W(CN)₈][NO₃]·2H₂O is characterised by single-crystal X-ray diffraction [S.G.P2₁/m(11), a=8.0418(7), b=19.122(2), c=9.0812(6) Å, Z=2]. All platinum centres have the square-plane D_4h geometry with average dimensions Pt(1)–N 2.042(2) and Pt(2)–N 2.037(10) Å. The octacyanotungstate anion has the square-antiprismatic D_4d configuration with average dimensions W(1)–C 2.164(13), C–N 1.140(12), W(1)–N 3.303(5) Å. The structure exhibits two different mutual orientations of Pt versus W units resulting in Pt(2)–W(1), W(1)^* separations of 4.77(2), 4.55(2)^* and Pt(1)–W(1) of 6.331(8) Å. A centrosymmetric structure reveals groups of two distinct columns: the first is formed by intercalated NO₃⁻ between parallel [Pt(1)(NH₃)₄]²⁺ planes and the second consists of [W(CN)₈]³⁻ interlayered by, parallel to square faces of W-antiprisms, [Pt(2)(NH₃)₄]²⁺. The structure is stabilised through a three-dimensional hydrogen bond network via nitrogen atoms of cyanide ligands, hydrogen atoms of NH₃ ligands, water molecules and oxygen atoms of NO₃⁻ counteranions. The vibrational pattern and the range of ν(CN) frequencies attributable to the electronic environment of W(V) and W(IV) are consistent with the ground state Pt(II)↔W(V) charge transfer.     

Hydrothermal synthesis and structure of the first tin(II) squarate Sn2O(C4O4)(H2O)—comparison with Sn2[Sn2O2F4]

A tin(II) squarate Sn₂O(C₄O₄)(H₂O) was synthesized by hydrothermal technique. It crystallizes in the monoclinic system, space group C2/m (no. 12) with lattice parameters a=12.7380(9) Å, b=7.9000(3) Å, c=8.3490(5) Å, β=121.975(3)°, V=712.69(7) Å³, Z=4. The crystal structure determined with an R=0.042 factor, consists of [(Sn₄O₁₀)(H₂O)₂] units connected from one another in the [101] and [010] directions via squarate groups to form layers separated by Sn(II) lone pairs. This compound presents the same remarkable structural arrangement as observed in the tin-oxo-fluoride Sn₂[Sn₂O₂F₄] inorganic compound with Sn(II) lone pairs E(1) and E(2) concentrated in large rectangular-shape tunnels running along [001] direction.     

Synthesis,crystal structure and magnetic properties of the helical oxalate-bridged copper(II) chain {[(CH3)4N]2[Cu(C2O4)2] · H2O}n

The preparation, crystal structure and magnetic properties of a new oxalate-containing copper(II) chain of formula {[(CH₃)₄N]₂[Cu(C₂O₄)₂] · H₂O}_n (1) [(CH₃)₄N⁺ = tetramethylammonium cation] are reported. The structure of 1 consists of anionic oxalate-bridged copper(II) chains, tetramethylammoniun cations and crystallization water molecules. Each copper(II) ion in 1 is surrounded by three oxalate ligands, one being bidentate and the other two exhibiting bis-bidenate coordination modes. Although all the tris-chelated copper(II) units from a given chain exhibit the same helicity, adjacent chains have opposite helicities and then an achiral structure results. Variable-temperature magnetic susceptibility measurements of 1 show the occurrence of a weak ferromagnetic interaction through the oxalate bridge [J = +1.14(1) cm⁻¹, the Hamiltonian being defined as H = –J ∑_nmS_i · S_j]. This value is analyzed and discussed in the light of available magneto-structural data for oxalate-bridged copper(II) complexes with the same out-of-plane exchange pathway.     

Calix[4]quinones. Part 4: The ClO2 oxidation of calix[4]arene dialkyl ethers

Except for the special case of calix[4]arene diethyl ether 1, the chlorine dioxide oxidation of dialkyl ethers 2-5 yielded only the corresponding calix[4]diquinone dialkyl ethers 8-11. Chlorine dioxide oxidation of calix[4]arene diethyl ether 1 produced two isomeric products 6 and 7, which were stable enough to be isolated by column chromatography. However, a slow conformational interconversion between isomeric pair 6 and 7 was observed at room temperature, and the equilibrium was reached after 400 h at 18 °C with an amount of 5:3 in favor of syn-isomer.     

Ethylene polymerization promoted by dinuclear titanium p-tert-butylthiacalix[4]arene complexes

The dinuclear titanium p-tert-butylthiacalix[4]arene complexes 1 and 2 after activation with methylaluminoxane have been tested as homogeneous catalysts for the polymerization of ethylene. The results show that the catalytic activity of 1, although still poor, is higher than those of the related mononuclear titanium complexes bearing calix[4]arene as ligand. The molecular weight of the polyethylene produced are high (M_W up to 1.4 × 10⁶ Dalton) with broad molecular weight distribution. The polyethylenes have high melting point (133-142 °C) indicating a linear polymer microstructure which was confirmed by ¹³C NMR analysis.