甲基蓝-钛酸盐纳米聚合物薄膜的光谱和光学非线性研究

 为了满足光学非线性器件设备对工作材料的要求,探究具有高阶非线性效应的固态薄膜材料的制备方法,并对其光学特性进行表征,采用化学插入法,将甲基蓝染料分子插入到具有纳米量级的层状钛酸盐片间,制备了甲基蓝-钛酸盐纳米聚合物薄膜,通过吸收光谱和荧光光谱的测定,发现薄膜的吸收峰相对于染料溶液发生了明显的蓝移,表明染料分子在纳米片间是H-聚集排列。进一步应用单光束连续He-Ne激光Z-扫描技术研究了样品的非线性光学特性,结果显示：插入染料分子的钛酸盐纳米MB/HTO聚合物薄膜具有“负”的非线性折射率,在低功率连续激光作用下聚合物薄膜的非线性折射率系数n2的量级为10-10 m2/W。     

全光极化聚合物薄膜中染料分子取向的模型

对光极化后偶氮染料聚合物薄膜中染料分子的取向方式进行了研究,指出当写入光（基频与其倍频光）为线偏振且偏振方向互相平行时,极化薄膜中多数染料分子垂直写入光偏振的方向作轴向排列,而少数分子沿平行于写入光偏振的方向作极性排列,但只有后者对薄膜的宏观二阶非线性有贡献,实验证实了上述模型。     

ZnSe薄膜的激子光学非线性

提出了用透射光谱方法测量非线性吸收系数和非线性折射率与波长的关系，理论分析结果表明这两个参数可由线性和非线性透射光谱以及调谐染料激光线型得到．用该方法研究了ZnSe薄膜在77K和室温两种温度下的光学非线性，得到了这两个温度下的非线性吸收系数和非线性折射率与波长的关系，这一结果与其他方法得到的结果相符合 关键词：     

准波导结构下染料薄膜的荧光光谱和放大自发辐射光谱特性

通过对RhB/PMMA和Rh6G/PMMA染料薄膜的荧光光谱和放大自发辐射(ASE)光谱的实验测量和理论分析,研究了准波导结构染料薄膜的荧光光谱和ASE光谱特性。实验上采用连续激光和脉冲激光照射,分别测量准波导结构RhB/PMMA和Rh6G/PMMA染料薄膜的荧光光谱和ASE光谱,发现荧光峰和ASE峰随着染料掺杂浓度和薄膜厚度的增加产生红移;理论上考虑准波导结构下薄膜中染料的自吸收效应,类比激光器谐振腔模型,分析低阶导模传输的增益特性,获得了荧光光谱与ASE光谱中荧光峰和ASE峰对应波长与染料掺杂浓度的关系,数值计算与实验测量相吻合。结果表明,准波导结构下薄膜中染料自吸收效应导致荧光峰及ASE峰发生红移,改变染料掺杂浓度,可以在较大调谐范围实现ASE。     

多孔硅/DR1复合膜三阶非线性光学性质的研究

采用物理吸附方法制备出多孔硅和偶氮化合物染料分散红（DR1）的复合薄膜.用单光束扫描法研究了多孔硅/ DR1复合膜的三阶非线性光学性质，测量了在1064 nm处多孔硅/DR1复合膜的双光子吸收系数和非线性折射率.实验结果表明，同多孔硅相比，多孔硅/DR1复合膜三阶非线性光学效应明显得到了增强.     

甲基橙偶氮染料掺杂聚乙烯醇薄膜的光存储特性研究

研究了甲基橙(MO)偶氮染料掺杂聚乙烯醇(PVA)薄膜的光致双折射和全息光存储特性.利用YAG激光二倍频(532nm)作为写入光,He-Ne激光(632.8nm)作为读出光,考察了不同染料浓度薄膜的光致双折射,探讨了光致双折射和泵浦光功率的关系,并实现了全息光存储.阐明了MO/PVA光存储的物理机制.     

染料敏化纳米ZnO薄膜太阳电池机理初探

讨论利用ZnO代替TiO2作为光阳极制作染料敏化薄膜太阳电池的可行性.使用LSV法，IR光谱和UV-vis光谱探讨了电池的工作机理和性能，并与染料敏化纳米TiO2薄膜太阳电池作了比较.结果发现ZnO薄膜表面与染料的吸附键合力太弱是导致ZnO太阳电池效率低下的主要原因. 关键词： 纳米ZnO 太阳电池 染料敏化 量子效率     

有机紫外滤波材料的紫外光谱性质研究

通过缩合反应合成了一种有机紫外滤波染料--2,7-二甲基-3,6-偶氮环庚-1,6-二烯高氯酸盐,并采用元素分析、红外光谱、紫外光谱等手段对其进行表征,着重讨论了不同浓度的染料溶液和染料掺杂的聚乙烯醇(PVA)薄膜的紫外光谱性质.实验表明,当染料浓度较低时,溶液的最大吸收波长为322 nm,薄膜的最大吸收波长为325 am.随着染料浓度的增加,溶液和PVA膜紫外截止通带宽度加宽,表现为285～345 nm区间为强吸收带,而在日盲紫外波段(240～285 nm)保持较高的透过率.利用染料溶液和染料掺杂的PVA膜的这种光谱特性,制作出日盲紫外滤波器.     

光电子技术与器件 光能转换与器件

TM914．42 2005042928 染料敏化纳米ZnO薄膜太阳电池机理初探=Mechanism of dye-sensitized solar cell based on nanocrystalline ZnO films[刊,中]／曾隆月(中科院等离子体物理所．安徽,合肥 (230031)),戴松元…／／物理学报,-2005,54(1),-53-57 讨论利用ZnO代替TiO2作为光阳极制作染料敏化薄膜太阳电池的可行性。使用LSV法,IR光谱和UV-vis 光谱探讨了电池的工作机理和性能,并与染料敏化纳米     

偶氮染料掺杂高分子PMMA薄膜的光学参数

在单晶硅片上,利用旋涂法,制备了偶氮染料掺杂高分子（ＰＭＭＡ）薄膜,可变入射角、波长扫描的全自动椭圆偏振光谱仪,研究了薄膜的复折射率、吸收系数和厚度,分析了影响薄膜电子光谱的因素。研究结果表明,该薄膜在４００～６００ｎｍ波长范围内,存在强而宽的吸收,并且发现分子聚集状态对该染料的吸收光谱有较大的影响。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.     

Single-beam self-referenced phase-sensitive surface plasmon resonance sensor with high detection resolution

A versatile and low-cost single-beam self-referenced phase-sensitive surface plasmon resonance(SPR)sensing system with ultra-high resolution performance is presented.The system exhibits a root-mean-square phase fluctuation of ±0.0028.over a period of 45 min.i.e.a resolution of±5.2×10-9 refractive index units.The enhanced performance has been achieved through the incorporation of three design elements:a true single-beam configuration enabling complete self-referencing so that only the phase change associated with SPR gets detected,a differential measurement scheme to eliminate spurious signals not related to the sensor response,and the elimination of retardation drifts by incorporating temperature stabilization in the liquid crystal phase modulato .Our design should bring the detection sensitivity of non-labeling SPR biosensing closer to that achievable by conventional fluorescence-based techniques.     

Influences of SiO2 protective layers and annealing on the laser-induced damage threshold of Ta2O5 films

Ta2O5 films are prepared on BK7 substrates with conventional electron beam evaporation deposition.The effects of SiO2 protective layers and annealing on the laser-induced damage threshold (LIDT) of the films are investigated.The results show that SiO2 protective layers exert little influence on the electric field intensity(EFI)distribution,microstructure and microdefect density but increase the absorption slightly.Annealing iS effective on decreasing the microdefect density and the absorption of the films.Both SiO2 protective layers and annealing are beneficial to the damage resistance of the films and the latter is more effective to improve the LIDT.Moreover,the maximal LIDT of Ta2O5 films is achieved by the combination of SiO2 protective layers and annealing.